Oracle report server problem
Hi all
I install oracle application server 10gR2 on THREE servers (windows server 2003)
all the servers on the same doman.
so that means I have three oracle report server on the network.
but when I run the following command (rwdiag -findAll)on one of the servers, it gives me just two oracle report server exist on the network the third on is missing despite that it is up.
And when I execute the same command (rwdiag -findAll) on the same server which contains the report server which I have problem with, it gives me that it is on the network.
by.
Edited by: user1089169 on Apr 15, 2013 11:47 AM
Reports
this is the report-forum. there are the report gurus, which can help you
Similar Messages
-
Oracle Report Server wierd problem
Hi All,
I am facing very wierd problem with oracle report server.
I am using Oracle Report Server 10g R1. The problem I am facing is as under:
There is custom parameter form where user enters report filter criteria and press a button to create the report.
The problem is that report is giving output some times and sometimes it gives no output at all. Both the times, the parameters passed by user are same. The report executions are done for both runs one after other. We have tried to look in report server trace file but could not find anything. When report server fails to give any data in the report, at the same time, we have tried to execute the report query on SQL prompt and it did return data.
Can any one give any hint where the problem could be ?
Thanks,
Ramchandra JetwaniHi,
When i used to get only one page the options like facing, continuous facing are disabled. And displays only single page.
These options are enabled only when there are multiple pages in pdf.
One more thing i found that it happens when I first view the report as pdf it displays
all the pages, then i change the display format to csv and again when i change
the format to pdf the problem starts.
And when I will restart the report server service, it works fine again until i wont view it in CSV format.
Message was edited by:
Yogesh -
Oracle 11i Reports Server Problem
When i tried to exploer the Service
Financials Intelligence - Vision Operations (USA)
in Oracle Applications 11i Server. It gives out the following error
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
Can anyone tell me what may be the cause for this error.
Earliest responses appreciated.
Thnks,
Sundar.I have checked the reports server . It was not running. When i tried to restart the reports server service. It gives the following error message
Windows could not start the Oracle Report Server [Rep_60_vis] on Local Computer. For more information, review the system event log. If this is a non-Microsoft service, Contact the service vendor , and refer to service-specific error code 186.
BTW, Can you please let me know the file name of the Reports Server script so that i can have a look at it. -
For Persian Language show wrong (generated by Oracle Report Server)
Hi,
When Oracle Report Server (10.1.2) Generate PDF output show persian characters wrong.
persian language(Use in Iran , Azarbayjan , Tajikestan ,... ) has 4 characters more than Arabic (cp1256) . this 4 characters is (پ ,ژ,گ,ج) .
when come (this characters ) in duration word appear a space between word.
for example word is پشتو But show in PDF پ شتو .
in HTML format we don't has this problem only accrue in PDF output .
This Persian characters :
U 067E PEH
U 0686 TCHEH
U 0698 JEH
U 06A9 KEHEH
then now i dont know this problem related to Oracle report server or Acrobat Reader viewer ?
when we copy پ شتو of Arcobat reader and paste to windows notepad show correctly (پشتو ).
i think this is relare to /Encoding /WinAnsiEncoding insite pdf file becouse :
Windows code page 1252(Arabic encoding) but Persian is 1256 , often called the “Windows ANSI”
encoding. This is the standard Windows encoding for Latin text in
western European languages.
Please help me how i can solve this problem ASAP.
Regards
Adelhello,
unfortunatly no. that is, hwo desformat=delimited works. but you can switch them off using the DELIMITED_HDR commandline parameter (6i patch5 and up)
regards,
the oracle reports team -
Oracle Report Server Not Accessible
Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
Oracle Instance Location: C:\Oracle\Middleware\asinst_1
Oracle Instance: asinst_1
Domain Option: Create Domain
Domain Name: Sapphire
Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
Domain Host Name: PC201845.cts.com
Domain Port No: 7001
User Name: weblogic
Automatic Port Detection: true
Administrator Console: http://PC201845.cts.com:7001/console
EM Console: http://PC201845.cts.com:7001/em
EMAgent URL: http://PC201845.cts.com:5155/emd/main
Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=<i>transmission control protocol</i>. NFS=<i>network file server</i>.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share. -
Please help ! "Oracle Reports Server CGI - Reports Server name is not specified."
Hello Gurus,
I have an html form that allows putting in a parameter. Upon
submit the form, it'll pass a string URL with the parameter to a
new browser.
My url: http://localhost/servlet/oracle.reports.rwcgi.RWServlet?
diary&14252
I also used keymap looks like this
diary: report=Diary.rdf server=servername desformat=pdf
destype=cache userid=id/psswd@db myoid=%1 %*
But I get an Error: The requested URL was not found, or cannot
be served at this time. Oracle Reports Server CGI - Reports
Server name is not specified.
However, if I move the cursor to the end of the same url (or put
a space at the end) and hit Enter, then the report is
displayed. I guess there must be something wrong with my
configuration. Please help. I appreciated any inputs from you.
Thanks in advance.
AshleyI found the solution to my problem. It was nothing to do with
the cgicmd.dat keymap file, but the html form itself. It's
confused between the url arguments and form arguments from the
submit button. So, what I did was open a new window with all
arguments instead of using the submit function.
Regards,
Ashley -
Urgent : Oracle Reports Server 9.0.4.0.0 Japanese fonts
Hi,
I have one problem in displaying Japanese fonts in Reports Server.
I have installed Oracle Reports Server (9.0.4.0.0) by selecting radio button -
' Use Unicode (UTF8) as the Character Set'
while installing Infrastructure. But I didn't choose any Prodcut Language at the time of Middle Tier Installation.
I changed the value of NLS_LANG to JAPANESE_JAPAN.JA16JIS in registry for both Infra as well as Middle tier homes. Both are on same machine.But no able to display the report in Japanese Fonts. It gives me following error -
REP-501: Unable to connect to the specified database.
Could anybody help me resolve this issue ? Its urgent.
Thanks in anticipationI would advice you to install a new mid tier with Japanese language.
Regards
Pavna -
Unable to Start Oracle Reports Server
Hi,
I downloaded patch 17 for Oracle Forms and Reports 6i. Now I am unable to start my Reports server.
I am getting the following message:
Windows could not start the Oracle Reports Server [Rep60_XXX] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 186.
Did anyone encounter this problem? Please let me know how to fix it or do I need to go back to Patch 13 as I am working on XP.
Thanks in Advance.I think the Reports forum (Reports could be of help here.
Frank -
Oracle report server service returned service specific error 271
I setup Report 6i to start automatically as NT service in WinNT 4.0 server. Encountered the msg "The oracle report server <server name> service returned service specific error 271".
Can't find any documentations... can anyone please help? Thanks.
JoshuaHi,
Only thing I can think of is that the User log-in may not have the priviledge to start a serice or some other OS related problem. Or check that you do not have any other service running under same name / or the same port. Workaround would be to use following command to start the Report server:
rwmts60 -listen "server_tns_name"You need to add an entry for the Report server in TNSNAMES.ORA file. Infact for first case also, please check is you have right entry in tnsnames.ora for the Reports Server service.
Thanks,
Rohit -
Oracle Reports Server CGI - Report Job was cancelled upon user request.
I am running reports on the web through Forms using Run_Report_Object built in. I am using Oracle 9iAS Enterprise Edition Release 1(1.2.2.2.2), Forms 6i Patch 9 (6.0.8.18.3) and Reports 6i Patch 9 (6.0.8.18) using CGI implementation. Most reports are running fine, but I have one that produces 125 pages and we are getting the following messages in the browser:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job was cancelled upon user request.
However if you look at the Reports Server Queue Status thru the browser it shows that the report did finish, but it took 16 minutes. But the user gets the above message in their browser window.
Is there a way to get the first page of the report to display, while the rest of the report finishes, so the browser window doesn't timeout and display the above error?
Any help would be greatly appreciated.hi ,
There is no limit on the report run time. The most probable reason why you are getting the 'Report cancelled upon user request' message is the users might have hit the "cancel Report" button which is displayed when it is running in 'SYNCHRONOUS MODE'. do not hit that button as it will terminate the report. to increase the speed of returning the results by the report, try improving the sql that you use in the report, or if you have DBA rights try adding in INDEXES on the columns of the tables used by the report.
Hope this helps
Manoj -
Oracle Report Server Issue with Japanese Characters
We are trying to setup a Oracle Report Server to print the Japanese characters in the PDF format.
We have separate Oracle Report servers for printing English, Chinese and Vietnamese characters in PDF formats using Oracle Reports in the production which are running properly with Unix AIX version 5.3. Now we have a requirement to print the Japanese characters. Hence we tried to setup the new server for the same and the configurations are done as same as Chinese/Vietnamese report servers. But we are not able to print the Japanese characters.
I am providing the details which we followed to configure this new server.
1. We have modified the reports.sh to map the proper NLS_LANG (JAPANESE_AMERICA.UTF8) and other Admin folder settings.
2. We have configured the new report server via OPMN admin.
3. We have copied the arialuni.ttf to Printers folder and we have converted this same .ttf file in AFM format. This AFM file has been copied to $ORACLE_HOME/guicommon/gk/JP_Admin/AFM folder.
4. We have modified the uifont.ali (JP_admin folder) file for font subsetting.
5. We have put an entry in JP_admin/PPD/datap462.ppd as *Font ArialUnicodeMS: Standard "(Version 1.01)" Standard ROM
6. We have modified the Tk2Motif.rgb (JP_admin folder) file for character set mapping (Tk2Motif*fontMapCs: iso8859-1=UTF8) as we have enabled this one for other report servers as well.
Environment Details:-
Unix AIX version : 5300-07-05-0831
Oracle Version : 10.1.0.4.2
NLS_LANG : JAPANESE_AMERICA.UTF8
Font Mapping : Font Sub Setting in uifont.ali
Font Used for Printing : arialuni.ttf (Font Name : Arial Unicode MS)
The error thrown in the rwEng trace (rwEng-0.trc) file is as below
[2011/9/7 8:11:4:488] Error 50103 (C Engine): 20:11:04 ERR REP-3000: Internal error starting Oracle Toolkit.
The error thrown when trying to execute the reports is…
REP-0177: Error while running in remote server
Engine rwEng-0 crashed, job Id: 67
Our investigations and findings…
1. We disabled the entry Tk2Motif*fontMapCs: iso8859-1=UTF8 in Tk2Motif.rgb then started the server. We found that no error is thrown in the rwEng trace file and we are able to print the report also in PDF format… (Please see the attached japarial.pdf for your verification) but we are able to see only junk characters. We verified the document settings in the PDF file for ensuring the font sub set. We are able to see the font sub setting is used.
2. If we enable the above entry then the rwEng trace throwing the above error (oracle toolkit error) and reports engine is crashed.
It will be a great help from you if you can assist us to resolve this issue…Maybe 7zip or another tool has workarounds for broken file names, you could try that.
Or you could try to go over the files in the zip archive one-by-one and write it to files out-1, out-2, ..., out-$n without concerning yourself with the file names. You could get file endings back via the mimetype.
This script might work:
#include <stdio.h>
#include <zip.h>
static const char *template = "./out-%04d.bin";
int main(int argc, char**argv)
int err = 0;
zip_t *arc = zip_open((const char*)argv[1], ZIP_RDONLY, &err);
if(arc == NULL)
printf("Failed to open ZIP, error %d\n", err);
return -1;
zip_int64_t n = zip_get_num_entries(arc, 0);
printf("%s: # of packed files: %d\n", argv[1], n);
for(int i = 0; i < n; i++)
zip_stat_t stat;
zip_stat_index(arc, i, ZIP_FL_UNCHANGED, &stat);
char buf[stat.size];
char oname[sizeof(template)];
zip_file_t *f = zip_fopen_index(arc, (zip_int64_t)i, ZIP_FL_UNCHANGED);
zip_fread(f, (void*)&buf[0], stat.size);
snprintf(&oname[0], sizeof(template), template, i);
FILE *of = fopen(oname, "wb");
fwrite(&buf[0], stat.size, 1, of);
printf("%s: %s => %lu bytes\n", argv[1], oname, stat.size);
zip_fclose(f);
fclose(of);
zip_close(arc);
return 0;
Compile with
gcc -std=gnu99 -O3 -o unzip unzip.c -lzip
and run as
./unzip $funnyzipfile
You should get template-named, numbered output files in the current directory.
Last edited by 2ion (2015-05-21 23:09:29) -
Servlet calls to Oracle Report Server
I have an app server (oracle 9ias) which will be available to
the public.
However, I also have an oracle report server that produces pdf
reports from an rdf template but the server will not be
available to the public.
How can I use JSP,java servlets or other means to access the
report server from via the app server and generate the pdf
reports to the clients browser, bearing in mind that the client
has no direct access to the oracle report server?In your JSP or servlet you can make a URLConnection to the
reports server, passing all appropiate paramters across in the
URL ex/ http://reports_server/reportApplication/rwcgi60.exe?
DESFORMAT=pdf&DESTYPE=FILE&DESNAME=outputname&server=servername&p
aram1=...¶m2=... etc. you can place all the report
parameters and values and all the Oracle Report specific
paramters on the URL in the above format. After you open the
java.net.URLConnection with the appropiate connection, the
report is submitted, you can then get any error streams, or
codes from the URLConnection API.
Jeff -
Unable to start Oracle Reports Server for 10g version 10.1.2.3.0
Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
| Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>
<!--property name="cacheDir" value="your cache directory"/-->
<!--property name="maxCacheFileNumber" value="max number of cache files"/-->
<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"/-->
</cache>
<!--Please do not change the id for reports engine.-->
<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">
<!--property name="sourceDir" value="your reports source directory"/-->
<!--property name="tempDir" value="your reports temp directory"/-->
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
<property name="oidEntity" value="reportsApp_myhostname_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"/>
</security-->
<!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
<property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</destination-->
<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<!-- By default server will use rwnetwork.conf as network config file
Use this element to override the same -->
<!--networkConfig file="rwnetwork.conf"></networkConfig-->
<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
<!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
<property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</notification-->
<log option="noJob"/>
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
</jobStatusRepository-->
<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>
<!--jobRecovery auxDatFiles="yes"/-->
<!--
The value of the 'identifier' element is encrypted and is of the form SERVERACCESSKEY_USER/SERVERACCESSKEY_PASSWORD
SERVERACCESSKEY_USER and SERVERACCESSKEY_PASSWORD in <server>.conf and targets.xml
file should match for Reports EM pages to display data correctly.
Corresponding entries of username and password in targets.xml:
<Property NAME="Password" VALUE="SERVERACCESSKEY_PASSWORD" ENCRYPTED="FALSE"/>
<Property NAME="UserName" VALUE="SERVERACCESSKEY_USER" ENCRYPTED="FALSE"/>
-->
<!--pluginParam name="mailServer">stmail.oracle.com</pluginParam-->
<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->
<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:758)
at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall -
Oracle Report Server Engine is getting stopped after starting.
Hello,
Reports Engine is shutting down after starting.
OS = Solaris 10
Application Server = Oracle 10gr2
*** 2011/1/4 3:59:34:723 -- Shutting down engine rwEng-0
*** 2011/1/4 3:59:34:726 -- Reports Server shut down engine rwEng-0
*** 2011/1/4 3:59:34:726 -- Shutting down engine rwURLEng-0
rwserver.log
*** 2011/1/4 3:29:26:924 -- Reading server config file /apps/oracle/product/DSrip10gR2/reports/conf/rep_oxdaps39b_oas_dsrip.conf
*** 2011/1/4 3:29:26:926 -- <server version="10.1.2.0.2">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>
<!--property name="cacheDir" value="your cache directory"/-->
<!--property name="maxCacheFileNumber" value="max number of cache files"/-->
<!--property name="ignoreParameters" value="parameter names to be ignored in constructing cache key, separated by comma ','"/-->
</cache>
<!--Please do not change the id for reports engine.-->
<!--The class specifies below is subclass of _EngineClassImplBase and implements EngineInterface.-->
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackT
imeOut="90000">
<!--property name="sourceDir" value="your reports source directory"/-->
<!--property name="tempDir" value="your reports temp directory"/-->
<!--property name="keepConnection" value="yes"/-->
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30"
callbackTimeOut="60000"/>
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"
/>
<property name="oidEntity" value="%REPORTS_OID_ENTITY%"/>
</security-->
<!--destination destype="oraclePortal" class="oracle.reports.server.DesOraclePortal">
<property name="portalUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</destination-->
<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">
<!--property name="proxy" value="proxyinfo.xml"/-->
</destination>
<!-- By default server will use rwnetwork.conf as network config file
Use this element to override the same -->
<!--networkConfig file="rwnetwork.conf"></networkConfig-->
<job jobType="report" engineId="rwEng"/>
<job jobType="rwurl" engineId="rwURLEng"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
<!--notification id="wfNotify" class="oracle.reports.server.WorkflowNotify">
<property name="connStr" value="%WF_DB_USERNAME%/%WF_DB_PASSWORD%@%WF_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</notification-->
<log option="noJob"/>
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
</jobStatusRepository-->
<!--trace traceOpts="trace_all"/-->
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>
<!--jobRecovery auxDatFiles="yes"/-->
<!--
The value of the 'identifier' element is encrypted and is of the form SERVERACCESSKEY_USER/SERVERACCESSKEY_PASSWORD
SERVERACCESSKEY_USER and SERVERACCESSKEY_PASSWORD in <server>.conf and targets.xml
file should match for Reports EM pages to display data correctly.
Corresponding entries of username and password in targets.xml:
<Property NAME="Password" VALUE="SERVERACCESSKEY_PASSWORD" ENCRYPTED="FALSE"/>
<Property NAME="UserName" VALUE="SERVERACCESSKEY_USER" ENCRYPTED="FALSE"/>
-->
<!--pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam-->
<!--pluginParam name="proxy" type="file">proxyinfo.xml</pluginParam-->
<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2011/1/4 3:29:26:927 -- Reports Server is starting up
*** 2011/1/4 3:29:33:761 -- Reports Server started up engine rwURLEng-0
*** 2011/1/4 3:29:34:236 -- Reports Server started up engine rwEng-0
*** 2011/1/4 3:59:34:723 -- Shutting down engine rwEng-0
*** 2011/1/4 3:59:34:726 -- Reports Server shut down engine rwEng-0
*** 2011/1/4 3:59:34:726 -- Shutting down engine rwURLEng-0
*** 2011/1/4 3:59:34:727 -- Reports Server shut down engine rwURLEng-0
*** 2011/1/5 4:31:21:443 -- Reports Server started up engine rwEng-0
=============================================================
rwservlet.properties
SERVER_IN_PROCESS=YES
RELOAD_KEYMAP=NO
#DIAGNOSTIC=YES
#TRACEOPTS=TRACE_ALL
#TRACEFILE=rwservlet.trc
#TRACEMODE=TRACE_REPLACE
#SERVER=<reports_server_name>
#IMAGEURL=http://<web_server_name>:<port_num>/reports/rwservlet
#KEYMAPFILE=CGICMD.DAT
#DBAUTH=RWDBAUTH.HTM
#SYSAUTH=RWSYSAUTH.HTM
#ERRORTEMPLATE=RWERROR.HTM
#COOKIEEXPIRE=30
#ENCRYPTIONKEY=reports9i
#DIAGBODYTAGS=<reports_servlet_help_file_title>
#DIAGHEADTAGS=<reports_servlet_help_file_body_tag>
#HELPURL=<url_of_customized_help_file_for_reports_servlet>
#SINGLESIGNON=YES
OID_ENTITY=%REPORTS_OID_ENTITY%
#ALLOWHTMLTAGS=NO
#REPORTS_NETWORK_CONFIG=rwnetwork.conf
#OIDCON_INIT=10
#OIDCON_INCREMENT=10
#OIDCON_TIMEOUT=0
SERVER=rep_oxdaps39b_OAS_DSRIP
Kindly suggest how to fix this.
thanks,
KamIt could be the configuration issue. Reconfigure the engine.
-
Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
ThanksI found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.
Maybe you are looking for
-
Hello , my name bonilla astrid buy an iphone 5 from a seller and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you
-
Shutterfly seems to still offline, is this the case?
Elements 12 is unable to upload a book project to shutterfly. I searched the forum and found threads from March 2014 stating that Adobe & shutterfly were "working" on the problem with hopes of a resolution "soon". The error dialogue box states: Doe
-
Import Silent video into Premiere
I am making a simple video. I have one track of video of a speaker with the audio (separately recorded and replacing the audio that came from the video cam). And I am trying to lay on another video layer to cut in and out with the speaker. I screen r
-
O2 in the Uk are a dreadful network. Just today their entire data network failed. Across the entire country. And O2 are still being coy. Please see this report http://news.bbc.co.uk/1/hi/technology/8161938.stm One user phoned to complain and was told
-
Possible to map a QWERTY key stroke to a param?
I am in a process to replace Bidule with Mainstage, and one function I can't figure out how in Mainstage. I need to be able to type a QWERTY key stroke to toggle CC values (or tapping into plug-in param a la Mainsatage's mapping way). For example, I