Oracle reports 10g High Availability

Clustering is deprecated with 10g application servers and High availability is recommended by Oracle for fail over of Report services (standalone).
I would like to get any incite , oracle references as to how the recommended solution could be implemented both for cold and hot fail over of report services within the same subnet.
the architecture of our environment is that two hosts (one of them being standby) run report services using namingservice discovery mechanism and requests are manually redirected to the standby service in case one of them fails.
how could this be transformed into hot fail over ?
Regards

Read the section on High Availabilty in the Publishing Reports to the Web manual, and the section on Reports in the High Availability Guide.

Similar Messages

Oracle AS 10g High Availability

Hi,
i want to install 2 AS 10g in HA (active-active).
I see that there are 2 type, clusterware (but is active-passive) and http/webcache balanced?
It's right?
Has anyone an installation example?
Tnx

Paul M. wrote:
I see that there are 2 type, clusterware (but is active-passive) and http/webcache balanced?We use the latter (webcache). Have a look at Re: Oracle AS 10g Installation Issue.Thank you.
Customer wants to use 11g instead 10g.
We wants to use 2 server with a single access point that balance the workload.
I'm not expert of 11g and i don't know where i can start.
Can you help me? Can you list (macro) the steps or software to use?
I also need Forms & Report.
Is there any note in MOS?
Thanks
Edited by: Mr.D. on 14-nov-2012 2.22

Issue with Oracle Report 10g output

I want to generate text output in Oracle Reports 10g. I am using paper layout.Length of the fields want to print is 750. Each line is broken in the output after 120 characters length apporx. Please let me know if there is any way to print complete 750 characters.

Sample output is coming as below :
T2013 56600084112345                                                                                         FPWC
                                                                       955 OLD WILMINGTON RD                   FAYETTEVILLE
     CUMBERLAND                 NC28301                   00000001CONTACT TESING                          1234567890
                00000001          I'
I want it to be discplayed in single line instead of breaking.

Need help with Oracle reports 10g

Hi
we have a requirement in a oracle 10g application
this application is on the unix server
the requirement is such that the user must be able to print a report directly to the default printer
when the user clicks on the button a report must be printed on the users default printer
can u help us understand that how can we configure the local printer of the user on the unix server?

hi, piyush9010
Check this following link...
Oracle reports 10g output directly to printer
Oracle reports 10g output directly to printer
Make your printer as shared printer then try.
Use DESTYPE=PRINTER.
http://qamarsyed.blogspot.com/2011/02/how-to-print-oracle-report-to-network.html
http://docs.oracle.com/cd/E14571_01/bi.1111/b32121/pbr_cla005.htm#i637246
Hope this helps
If someone's response is helpful or correct, please mark it accordingly.

Can I use Oracle Reports 10g with Apps 11.5.10 version?

Apps Version is 11.5.10
Oracle Reports 10g is compatible with 11.5.10 or not?
If Oracle Reports 6i is the only compatible version with 11.5.10 , from where I can download Oracle Reports 6i?
Thanks in advance.

Hi;
As you said 6i should come with ebs, If they are not able to find it can we raise an SR to get/download oracle reports 6i?I still cant get what is reason of you need to install 6i spreatly? Anyway it comes by default installation. Its mean you have it already,if you havent you cant work wiht ebs nomore.
In addition to EBSDBA post,Please see below great link which is posted by Hussein Sawwan
rapidwiz options *<< Posted by Hussein Sawwan*
Regard
Helios

Oracle report 10g vs Oracle Forms 11g

Hi,
My application run on Oracle 10g with Oracle Forms&Report 10g
I have to modify a report file which was saved by oracle report 11g.
When I open the file with Oracle Report 10, I have the following warning : "Avertissement ! Ouverture d'un rapport enregistré avec une version plus récente. Risque de perte de fonctionnalité. Continuer ?" (translation : "The file opened was saved with a more recent version of Oracle Report. You may lose some information. Continue ?").
What kind of information I may lose ?
Can I modify my file on Oracle Report 11g and compile it in Oracle Report 10g ?
Or
Can I modify my file on Oracle Report 11g and compile it in Oracle Report 11g and run it on Oracle Report 10g ?
Thanks a lot.
Michel

36368ccd-1921-478d-9716-f90da72c8ed6 wrote:
What kind of information I may lose ?
Can I modify my file on Oracle Report 11g and compile it in Oracle Report 10g ?
Or
Can I modify my file on Oracle Report 11g and compile it in Oracle Report 11g and run it on Oracle Report 10g ?
Michel,
Question 1 - the file will no longer be useable with Reports 10g - you will loose everything.
Question 2 - No, newer versions of Oracle Forms and Reports are not backward compatible with older versions.
Question 3 - No, see answer to question 2.
Craig...

Migration from SQL Server Reporting Services to Oracle Reports 10g

Hi,
I have few reports which have been created using the Microsoft Sql Server Reporting Services.Now i want to create similar reports using Oracle Reports 10g.
Will i need to start from scratch the creation or is there migration tool that would reduce the efforts for the same.
Thanks in advance.

Note there's a lot of useful info on sqldev's homepage (Learn More tab): migration docs and examples.
Regards,
K.

SCOM 2012 R2 Reporting Services High Availability Configuration Setting

Can u guys tell me how I can make a scom 2012 r2 report server high availability configuration kindly share the steps or screen of it.

SCOM reporting feature is depend on SQL reporting and as a result you may refer to SQL reporting service high availability.
For detail, pls. refer
http://technet.microsoft.com/en-us/library/bb522745.aspx
http://www.mssqltips.com/sqlservertip/2335/scale-out-sql-server-2008-r2-reporting-services-farm-using-nlb-part-1/
http://www.mssqltips.com/sqlservertip/2336/scale-out-ssrs-r2-farm-using-windows-network-load-balancing-part-2/
http://technet.microsoft.com/en-us/library/hh882437.aspx
Roger

[Secure Configuration] Oracle Reports 10g Email Configuration...

Hi Everyone,
In oracle Reports 10g, we have an option of sending mail as an attachment using destype = mail and desname = [email protected] For this to happen we have to add the outgoing mail server name in the <report server>.conf file. Once we configure this setting, end-users can send any report to any mail-id. So, how to make an secured configuration so that they can send only those allowed reports?
Note: We have already many reports which are already deployed. So we cant incorporate the validation or some logic within the each report.

hello dsegard,
Thanks for you help. I tried the way which you had said. I have incorporated the security tag in the conf file and included the XMLSecurity Project( Deployed the JAR file and done necessary configuration). Now, I dont know how to use it.
Is there any alternative way for this? Is there any way that we can remove the default options provided by the Oracle Reports under the Destype?

Can we add Basic Authentication for Oracle Report 10g?

As we know, Apache supports basic Authentication, and Oracle Report 10g bases on Apache, that means Oracle Report 10g supports Basic Authentication too?
Can anyone tell me the steps on how to configure Basic Authentication for Oracle Report 10g?
Thanks for your help in Advance!
P.S.
I tried to add the following content to the file "httpd.conf" under the directory "E:\OraHome_2\Apache\Apache\conf\" (I installed report under this folder), but it doesn't work well:
<Directory "E:\OraHome_2\Apache\Apache\htdocs">
AuthType Basic
AuthName "Private Documentation Repository"
AuthUserFile "C:\Program Files\Apache Software Foundation\Apache2.2\mypasswd"
Require user yangsun
</Directory>

Answers at your duplicated thread --> Some inter view Questions Please give prefect answer help me

Invoke oracle report 10g from database pl/sql package

Hi
Is there a way that i can invoke an oracle report 10g from the database pl/sql package? I am working on a requirement that needs to generate a report when one of the criteria is not met.
Please suggest me on this.

Thanks for the info.
I have a scenario where i need to fetch members details like name , email address and so on from the mainframes on the oracle database. Then on the oracle database i need to check if they have a email address or not. If yes then i need to generate a notice and mail it to them. If they don't have an email address, i'll have to print that out in a some centralized location.
By the way, the notice was developed using oracle reports 10g.
Now i am developing a pl/sql package which will do the address validation but i didn't know how to call a oracle report to generate the notice in pl/sql procedure.
As suggested i will try with dbms scheduler and see if that works for me.

ORacle reports 10g conditional formatting

ORacle reports 10g
Trying to hide a txt field without losing the line
If I hide the field depending on a condition, all lines below move up - I do not want this to happen
Any suggestions ?
XML is out of the question at this time on this report.

If possible, change the vertical elasticity of the item to 'Fixed'. If it is not feasible, then do you have any other items on left or right of the hidden item, which you do not hide? If you enclose all the items (including the item which is in question) within a frame. And change the line color of the frame to transparent. Vertical elasticity as 'Variable'. If that is also not possible, then create a boilerplate text (type . there), next to the item. Change the color of the '.' to white and font size to 2. So it is not visible. When item is hidden, '.' will be there and lines wouldn't move up.
Hope this helps.

Generate arabic pdf in oracle report 10g

what is the right way to generate arabic language in oracle report 10g destype=PDF??
i do that for font < arial > and < transparent arabic >
but i have a problem with some arabic font
like < simpilified arabic >
and i put this font in utifont.ali

You could use the java-library barbecue to generate an image from your number and then include that image in your report.

How to add Oracle Graphics 6i charts (OGD) to my Oracle Reports 10g

Hi,
Is there any possibility to add Oracle Graphics 6i Charts (.OGD) to Oracle Reports 10g
(OR)
If not possible, Can you please provide steps to migrate OGD to any format that is supported in Oracle Reports 10g.
Regards,
Swethan

Oracle Graphics and its OGD image format are no longer supported. Reports built with previous versions of Oracle Reports containing Oracle Graphics charts will continue to run in Oracle Reports 10g Release 2 (10.1.2) if the Oracle Graphics 6i runtime is installed on the same machine in a separate ORACLE_HOME. However, this is not a supported configuration, and Oracle will not fix bugs that result from this configuration.
Re-create all Oracle Graphics 6i objects using the Graph Wizard

Cofiguring & sending email with attachment from Oracle Report 10g

I want to run report from Oracle 10g reports to be sent as email attachement to differnt people with their respective personal content.
The first problem is to know how to configure Oracle reports 10g to be able to send output to email address.
The second problem is to be able to route seperate pages of the report to seperate email address.
Thanks to all.

For configuring email for reports
http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#sthref472
For sending the output to different mail id's you can use bursting and distribution feature of Oracle Reports. For details,
http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dist.htm#i1007338

Oracle reports 10g High Availability

Similar Messages

Maybe you are looking for