Oracle Reports Components list not available in BI Publisher

I have configured the Oracle Report Security settings in oracle Business intelligence publisher, Add oracle report, when i try to ADD report in region, it didn't display Oracle Reports Components list. Pl suggest, what should i do
Regards,

I had a similar issue in 10.3.3.1.
Try this:
http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/

Similar Messages

  • Report-Service is not available: REP-110 und REP-1070

    Hello,
    I get the following errors after new configuration for Froms, Reports and Discoverer (11.1.1.6):
    FRM-41214: Unable to run report
    Or:
    REP-110: File 01RD_MARG_04E. cannot be opened.
    REP-1070: An error occurred while opening or saving a document.
    The Report-Server is in Running state, but Report-Service is not available.
    How can I isolate the error position?
    Thanks in advance,
    Mohammad

    Just out of curiosity, what did you change in opmn.xml?
    Oh, I see in the doc now. That the same thing can be inserted in opmn.xml. But I have never seen
    that done in any production environment I have encounterd.
    I find that document a little bit strange, to be honest. Is that really the way to configure the Reports Service?
    It is so very strange that they do not mention the env-id possibility in the rwserver.conf file.
    The REPORTS_PATH is gotten from either registry, that is, the default for the host if you so like, or envid in the call to reports service via the URL as a parameter, ie. &envid=test. That envid can also hold
    variables like NLS_LANG and such.
    I regard the opmn files as do-not-touch and part of the WLS system structure.
    I seldom touch the reports.bat-file. But maybe that was necessary in this case. I do not know.
    Edited by: Lars Sjöström on May 31, 2012 5:03 PM

  • Oracle validated package is not available for OEL5

    Oracle validated package is not available for OEL5 yet. Does anyone know when it will be available?
    Available now:
    oracle-validated-1.0.0-3.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
    oracle-validated-1.0.0-3.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)
    oracle-validated-1.0.0-4.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
    oracle-validated-1.0.0-4.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)

    Looking forward to the release. Will the release also include updates for 11g readiness and validation?

  • Order creation control if components stock not available

    I am creating a production order manually through CO01 for a material which is having components. But some components are not having sufficient  stock as per required for the above production order qty.Now system should not allow me to create the order. What settings I need to do in the system.

    Dear ,
    You can apply user exit : PPCO0001 Application development: PP orders   or Screen Variant SMOD .
    Refer useful theards of list of user exit : UserExit / CO01/ urgent
    or You can also stop realseing in Standrad settings even the order is created  in OPJK-Order type and Availability Check key -02-Keep Relase Material -3 ( No realse if missing parts )  , Mark Status Check , Check material availablity while Saving of order .
    Regards
    JH

  • Oracle EM 10g is not available

    Hi friends,
    Recently i installed oracle DB 10g R1 and it worked fine as Oracle EM is also connecting. But all of a sudden im not sure the EM seems to be not available and im getting the following message in the EM like
    The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation.
    But i can connect with the db in cmd prompt, i dont know what was the problem with EM as it is showing in unavailable status. What could be the problem here friends.
    Due to this EM problem i couldnt connect my application with the db in my local machine
    I have also checked in the metalink and tried with the ways but none of them dint worked
    [ID 309687.1]
    Cause
    The DB COntrol console process is unable to connect to the database it self from various reasons:
    1. the listener is not started
    2. the database is not registered with the given listener
    3. the DB Console configuration is incorrect for some reason
    4. Database is not opened or accessible for client connections.
    Solution
    Verify if the DB Console process is able to connect to the database with:
    1. the listener is started and the database instance is registered: lsnrctl status <listener name>
    2. The SYSMAN account is unlocked nd the password is not expired.
    3. Open ORACLE_HOME/<hostname>_<SID>/sysman/log/emoms.trc for connection errors.
    I followed all the steps as my sysman account is fine and it is getting connected via sqlplus.
    315299.1
    Cause
    The DBSNMP user account is locked and/or expired.
    Solution
    To implement the solution, please execute the following steps:
    1. Log into the database as a user with sysdba privileges.
    2. Issue the following sql:
    alter user dbsnmp account unlock;
    3. Verify that the dbsnmp user can connect to the database via sqlplus.
    4. Verify that the sysman user can connect to the database.
    I have checked from the above, as both the dbsnmp and sysman user is fine and it is getting connecting to my db. Other than this im not sure with the problem.
    Thanks
    Regards,
    Saro

    It is no longer available for download - if you have a valid Support contract, pl create an SR and request Support to ship you the media
    HTH
    Srini

  • Oracle reports Team please note

    dear sir
    i would like to know how can i Control Printer Attributes for a
    printer at Run
    Time Like page width , height etc
    we are using oracle reports 6i as reporting tool.
    my problem is i had installed a printer and it is set for
    printing different reports ( like invoice slips , legal size ,
    A3 etc ) each time i have to manually set the page settup from
    printer folder .instead if there is an option to set the printer
    attributes from Reports 6i it is great
    tom if u have got time pls send me a reply ( i know u are busy
    with other oracle
    products..... i had posted this question oracle forums but no
    answer till today
    will u place this question to an expert there to solve this
    problem
    if u cannt leave this
    send me a reply
    sicerely
    rajesh

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sam1:
    I user Report60_server (shell script) to run oracle report server(rwmts60).
    The server is used to run reports on the web.
    The report server runs if my display variable is setup with an ip address which run an X-window client. If I shut down the xwindow client the reports do not run.
    Do we need a x-window client?. Can we live with out the x-window client<HR></BLOCKQUOTE>
    Any one has faced this problem?
    null

  • Backing up the BB messenger contact list not available

    In the old versions of Blackberry, we had the option to backup the BB messenger contact list to the device, the media card, or remotely to an email. However, this feature is not available in the new BB Z10 !!!!! This feature is significant and necessary for all users Why was it omitted in the Z10 ??

    Your BBM contact list is now attached to, and backed up to, your BlackBerry ID.

  • Oracle Reports Parameter List form called through URL bring blank page

    We are using 10g Release 2
    We are able to load balance all other reports out there.
    1. Using run_report_objects in oracle forms
    2. Using a URL to call a report directly with parameters.
    However we are unable to use the URL function if there there is a hard ware load balancer in front. For the following scenario
    1. Using a URL to call an oracle report using its own internal parameters form. This is with the parameter "paraform=yes"
    Message was edited by:
    naveeny1974

    I just found out that IE 6 and IE 7 do not work. However, Firefox does work.

  • Spool list not available from SM37

    Hi All,
    We have scheduled a job and running successfully.
    But spool list not displayed from SM37, whereas spool request generated in SP01 at the same time when the job is completed.
    We've checked with the developer and they dint find anything wrong from program end.
    Kindly suggest what is going wrong here.
    Thanks in advance......

    Hi,
    Apply the following SAP notes to resolve this problem:
    1372936 - Spool lists no longer displayed from SM37 after SP
    1174127 - Job refers to incorrect spool request
    regards,
    Aidan

  • Spool list not available in SM37

    HI,
           i'm facing a error "spool list not avaiable" when i execute a background job and the job status is in finished state,but when i click the spool button i'm facing this error. I tried the sap note 1372936 and 1174127 but both notes are in cannot be implemented status.I tried hard to search a solution, but couldn't find.Please help if anyone knows the solution.

    Hello,
    What release and SP level your SAP system has ?
    Thanks

  • Publishing site announcement list, calendar list not available even activating feature

    " Team Collaboration List " feature is activated on publishing site. Again deactivated and activated, browser restarted, but the problem exists. No announcement list, task list, calendar list template found.
    Please let me know the way to fix the issue.

    Hi Shilabhadra,
    According to your description, my understanding is that you want to use announcement, task list, calendar list template at publishing site in SharePoint 2013.
    Please try to use PowerShell commands to disable and enable " Team Collaboration List " feature at your publishing site. You can do as opening SharePoint 2013 Management Shell, then typing the following commands:
    Disable-SPFeature –Identity 00BFEA71-4EA5-48D4-A4AD-7EA5C011ABE5 -url <the url of the publishing site>
    Enable-SPFeature –Identity 00BFEA71-4EA5-48D4-A4AD-7EA5C011ABE5 -url <the url of the publishing site>
    In the above commands, 00BFEA71-4EA5-48D4-A4AD-7EA5C011ABE5  is the identity of " Team Collaboration List " feature.
    More information, please refer to the links:
    http://platinumdogs.me/2009/12/10/team-collaboration-and-publishing-features/
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2011/01/04/activating-and-deactivating-features-with-powershell-in-sharepoint-2010.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Report file .rpt not included in clickonce publishing

    Hi,
    I created a application in VS2005 incuding a CrystalReport. It is running well on developing machine. The application is published with VS clickonce on a publishing server. The necessarry report file .rpt isn't included in publishing files. How do I get this into the publishing files?
    Thanks
    Andreas

    I don't understand this because I do as you described in the devlibrary: http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
    Here is a clickonce Deployment description. If you do like this you'll see, that it doesn't work because the .rpt file isn't included.
    Andreas

  • Human Task in jDeveloper 11g users list not available

    I have the problem, I defined SQL authenticator in wenlogic, and I want to do assignment at human task. But, human task only see jazn users, alhough I see the users defined in db at weblogic console
    Caused By: ORABPEL-10509
    User not found.
    User "bpmuser1" is not found in configuration "jazn.com"
    Check if the user exists in the repository specified by the configurations. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    at oracle.tip.pc.services.identity.jps.JpsProvider.lookupUser(JpsProvider.java:795)
    at oracle.tip.pc.services.identity.jps.AuthorizationServiceImpl.lookupUser(AuthorizationServiceImpl.java:223)
    at oracle.tip.pc.services.identity.jps.IdentityServiceImpl.lookupUser(IdentityServiceImpl.java:171)
    at oracle.bpel.services.workflow.verification.impl.VerificationService.lookupUser(VerificationService.java:3670)
    at oracle.bpel.services.workflow.verification.impl.VerificationService.c
    How do I make users from myrealm in WLS available to the worklist app?

    Hi ppssrr,
    Check the providers are in "SUFFICIENT" mode,both, DefaultAutenticator as your own.
    Other way:
    If I remember correctly, you can use "External Routing", creating an allocation rule from an external supplier.
    Then assign participant based on that rule as.
    More info: Configuring Human Tasks - 11g Release 1 (11.1.1.7)
    Greetings.

  • Spool List not available

    I am not able to see the spool when i run my program in background.
    I run it by executing the program in se38 choosing the option as execute in background. I am of the idea that SAP creates a spool on its own when i run any program that has a list output without me having to code anythin explicitly for it.
    please suggest me some ways of checking why is it happening !! this is urgent !!
    Thanks.
    Shiv

    You could write a wrapper program that does a submit.
    Do F1 help to see the extensions of this statement,  you can set the print parameters there.
    SUBMIT <program> to SAP-SPOOL.
    You can also set these parameters if you were to schedule this in a job via SM36.
    You can also set these defaults in your user profile, but this would make it so for ALL reports that you run.  Maybe not such a good idea.
    Also you must verify that you are actually generating ouput.  Do you get the list running in dialog mode?
    Regards,
    Rich Heilman

  • Reports Menu is not available in Websheet Application

    Hi All,
    I have installed APEX 4.2 in oracle 11g database 11.2.0.1.0 using Embedded pl/sql gateway method.
    But When i am trying to create Reports in Websheet application, there is no menu name like reports.
    Please help me to create reports in Websheet application.

    In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
    https://support.successfactors.com
    Thank you.

Maybe you are looking for