Oracle Reports - page numbering for repeating frames

Hello,
I have an Oracle Report that has one parent repeating frame containing several children repeating frames. One repeating frame has a maximum of three records per page. If the records do not exceed the maximum, page numbering is fine. If there are more than three records it creates a new page. The new page appends to the end of the report and throws off the page numbering. I changed the source of the page numbering from page number to panel number. The panel number gives the best results. All pages are numbered with the exception of the appended page(s). Does anyone have any suggestions?
Thanks

YES!!!, change the PRINT condition of your
panel field to ALL instead of FIRST.
null

Similar Messages

  • Page numbering - multiple repeating frames

    Hi,
    It’s a bit tricky in explaining this but I shall try to do my best.
    This is an invoice report with 2 parts (everything in the main section), main invoice and summary. The main invoice is in repeating frame R2 and summary (matrix report) is in repeating frame R3. Both the repeating frames are encompassed in repeating frame R1.
    Each part of the report should have page numbering (1 of 2 type) and the numbering should be independent of each other (for main invoice and summary).
    Main invoice has page numbering reset (both current page number and total number of pages) at R2 and summary's page numbering is being reset at R3. The report is working fine for a single invoice but when running it for multiple invoices the output is as below
    Inv# 100 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 101 - Main Section 2 of 3
    ------------------------------3 of 3
    Summary 3 of 3
    Inv# 102 - Main Section 2 of 3
    ------------------------------3 of 3
    Summary 3 of 3
    where as the desired output is
    Inv# 100 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 101 - Main Section 1 of 2
    ------------------------------2 of 2
    Summary 1 of 1
    Inv# 102 - Main Section 1 of 2
    ------------------------------1 of 2
    Summary 1 of 1
    It would be worth not to change the report's design as there are many frames, fields,..... but I don't know how to resolve this numbering problem.
    I am using reports 6i.
    Thanks for your help in advance.
    -Srikanth

    Any inputs would be appreciated.
    Thanks in advance
    -Srikanth

  • Page Numbering on repeating frame with 3 logical pages per physical page

    We have a report in Reports 6i that prints a form on continous multi-part paper. We are converting the report to print to a laser printer with three forms per page. Each form has page numbers in the format of "page 1 of 15". The "page" refers to the form number and the "of" refers to the total number of forms for the outer group. So we could have page 1 of 15 through page 15 of 15 followed by page 1 of 112, etc.
    I have tried all of the suggestions on how to base page numbers on a repeating frame and non of them seem to work. All the examples seem to be based on the idea that the logical page contains 1 or more physical pages; whereas my situation is that I have multiple logical pages on each physical page.
    Does anyone have a thought on how to do this?

    Create one summary column (lets say cs_pagenumber) in inner group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    Create one summary column (lets say cs_totalpages) in outer group and provide following:
    Function: Count
    Source: any field from innrer group
    Reset At: outer group
    (above will work if one field is printed only once in a form)
    Create a field in inner repeating frame for cs_pagenumber and create a boilerplate text (&cs_totalpages) in the same repating frame for cs_totalpages. This should solve the problem.
    Hope this helps.

  • Reports - Data source for repeating frames

    Does anybody know if there is an alternative way to pass data to repeating frames than queries or ref cursors?
    For example can I use a PL/SQL table as source for a repeating frame?

    YES!!!, change the PRINT condition of your
    panel field to ALL instead of FIRST.
    null

  • Report, Make a linkage group for two pages each page has a Repeating frame

    I Have two pages. And each page have a repeating frame inside a main frame.
    And two pages have a relational data. So, I should to make a linkage group for this two page.
    In my case,
    PAGE 1.
    *M_1 Main frame start
    R_1 Repeating Frame start
    Personal Data Part 1.
    R_1 Repeating Frame end
    *M_1 Main Frame end
    PAGE 2.
    *M_2
    R_2
    Personal Data Part 2.
    R_2
    *M_2
    If there are 3 peoples information, Repeating frame will display continuously.
    In my case,
    page 1
    page 1
    page 1
    page 2
    page 2
    page 2
    But I want to do the following.
    Page 1. -- 1st person's data
    Page 2.
    Page 1. -- 2nd person's
    Page 2.
    Page 1. -- 3rd.
    Page 2. so on...
    I need your help.
    please let me know how to solve this problem.

    Hi,
    i have a question related to this.
    i am making a report in a similar pattern:
    *M_1 Main frame start
    R_1 Repeating Frame start
    Data Part 1.
    R_2 Repeating Frame start
    Data Part 2.
    R_2 Repeating Frame end
    R_1 Repeating Frame end
    *M_1 Main Frame end
    Now the problem is that whenever there are multiple occurences of data in R_2, the data Part 1 is also printed that many times, whereas i want to show this just once.
    Is there any way to do this?
    Regards,
    Swati

  • Page breaks inside repeating frame

    Hi,
    I am developing a statutory report for India Localisation. In this report there is a repeating frame which has three sections inside. I want to ensure that each of these section prints on a new page all the time. Of course there will be some page wastage, but since the report is statutory it has a prescribed format which mandates this requirement. Each section is like a tabular column and it doesnt look good if it prints without any page break in between the sections.
    Here is what i have tried, I have created three child frames inside the parent repeating frame and I tried to set page break after, page break before and page protect for each of these sections and I also tried various combinations of these 3 settings. But still I couldnot get it right.:-( It will be of great help to me if any one could suggest me a better approach.

    Hi,
    the "page break" properties are only active in parent-child relationships. So if your frame1 is not expandable vertical, frame2 is no child object ob frame1 and so the property page break after of frame1 is not relevant for frame2. So change your layout, that frame2 is child of frame1 and frame3 is child of frame2, then the page break after will run as you expect. You can do this via the property vertical elasticity or via using an anchor between the frames.
    Regards
    Rainer

  • Reset Page Numbers for each group with XMLP 4.5

    I am currently working on the invoice report rtf template using XMLP 4.5
    We cannot upgrade to new version at this stage.
    Our requirement is, i want to reset the page numbers for each invoice. I know that it can be achieved using @section. I think this will work only XMLP 5.0 and after. Is there any other way to achive this requirement?
    Our reports are moving to production in another 3 days.
    I would be thankful If anybody can provide me the solution for this problem?
    Thanks
    Babu

    Hi Tim
    Thank you very much for your suggestion. We have upgraded to latest version of XML and now i am using @section to reset the page numbers for each invoice. This is working fine. But i have stucked to print the invoice copes for which page numbers should be reset.
    As per the client requirement i need to generate the invoice report with 3 more copies where COPY word will be there for duplicate invoice copies.
    I have written the rtf template logic like below:
    ex: <?for-each@section:G_INVOICE?>
    Invoice Information
    Invoice first copy information with COPY word (just copy the above original invoice layout and pasted)
    Invoice second copy information
    Invoice third copy information
    <?end for-each?>
    This is working fine. But client is demanding that all the invoice copies page numbers should start with 1. I tried by giving the @section for each invoice copy. But it was not working. Is there anyway to reset the page numbers for each invoice copy (anyway orginal invoice page numbers are resetting becuase i have used @section). It would be great help for me by providing the solution for my problem.
    Thanks
    Babu

  • Get report page numbers

    I am generating a test data record in Word with generating report toolkit. On every page I put in a footer text to the left with the date and time.
    (in Labview with "set report footer text").
    I also put in the Word template for the report, page numbers on the bottom RH side. When I run my vi I get the the footer text on the LH side,
    but I loose the page numbers on the RH side. How do I solve this ?

    Hi BartvStC,
    i´m not sure what i should see in your vi, it don´t show what you make.
    Attached you will find the vi with which i made it, the template doc and the result doc.
    Mike
    Attachments:
    Unbenannt21.PNG ‏9 KB
    Unbenannt1.PNG ‏10 KB
    Unbenannt11.PNG ‏6 KB

  • Dynamic Page Numbering for DPS documents

    Since we don't have just 1 document for the entire publication; is there any way to have a footer that has the page number in any way? (without having to manually update every page?)

    Use the book feature.
    But it is difficult to number your publication if you have vertical and
    horizontal pages.
    And why do you need page numbers anyways? Digital has hyperlinks and scroll
    bars for solid navigation
    (mobil gesendet)
    Am 09.01.2012 19:03 schrieb "blasto333" <[email protected]>:
       Dynamic Page Numbering for DPS documents  created by blasto333<http://forums.adobe.com/people/blasto333>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4126818#4126818>

  • HT201260 I have OSX 10.5.8. I want to download Pages & Numbers for that version. ow do I get the correct version?

    I have OSX 10.5.8. I want to download Pages & Numbers for that version. How do I get the correct version?

    Buy an iWork 09 DVD from a source such as Amazon or eBay.
    (90971)

  • Setting background image for repeating frame in .pdf report

    Is it possible to set a background image for a repeating frame, and more specifically for a repeating frame rendered in .pdf?
    I do not see any standard property in the navigator for images of any sort and the documentation touches only on setting background images for graphs, which is not the intent in my case. I -did- add an HTML table property background="myimage.jpg" but the report is ultimately generated in .pdf format and I was not surprised to see that the image was not rendered.
    Does anyone know if setting a background image as described is even possible, and if so, how? A second but less optimum solution would be setting the image as the background for all report pages, again in .pdf.
    Many thanks.

    Hi Raj,
    Yes you can have an image in the background. Thats possible if you are using XML forms as an iview or ivew dev in WebDynpro...
    Also check this [link|regarding background color change in iview]
    Regards,
    Piyush
    Reward points if this helps!!!

  • Page Break Before & Repeating Frame (Reports 10G - Windows)

    Hi to all,
    I have to give page break when a condition met in a tabular report.Like it s advised I tried some layout objects with page break before property true and wrote their return code true if this criteria occurs. But whatever I tried, I couldnt get my desired output.It gives page break but repeats a blank repeating frame in the next page but only with that object I added later with page break property. Anybody have an idea ?
    Thanks...

    Hi,
    sounds like there's no child object for your object with page break before. This property has only impact of the object itself and all it's child objects. An object is a child object of another object, if the position of this objects has impact of the own position. This is only the case, if the parent object is vertical expandable and the child object is horizontally overlapping the virtual expand-region, or the child-object is anchored to the parent object.
    So if you have this layout:
    blue box fixed size
    red box fixed size
    yellow box fixed size
    and you set page break before to the red box, you will get:
    blue box
    yellow box
    -- page break
    red box
    If the red box is verical expandable you will get:
    blue box
    --page break*
    red box
    yellow box
    So in your tabluar report your field of the report should be in a frame and this frame should be child object of your new object which must be vertical expandable or anchor them together.
    Regards
    Rainer

  • Group above master/detail report; page break causes repeat of master frame

    Hi
    I have a a group above master/detail report; when there is a page break part way through the master frame it causes the whole master frame to be repeated on the next page. I don't want this to happen, I just want the remainder of the master frame to be displayed on the next page. any ideas?
    TIA

    Hi
    I've tried switching the "Page Protect" to No at the page level and the "Print Object On" is set to "First Page" but it doesn't solve the problem. The whole master frame is repeated on the next page when a page break occurs part way through. The master/detail Repeating Frame "Print Object On" is set to "Last Page".
    Any other ideas?
    TIA

  • Page Numbering for the aging report

    Hi,
    Does any one know how I can achieve the following:
    For the customer ageing report we need to print all customer statements at once. On our print layout we currently use the following CurrentPage()/TotalPages() formula fields to dispaly the page number. The result we get is 1/10, 2/10, 3/10....etc.
    We actually need the following, for total 10 pages statement would like to display the page number as follows:
    Customer A: 1/1
    Customer B: 1/3, 2/3, 3/3
    Customer C: 1/1
    Customer D: 1/5, 2/5, 3/5, 4/5, 5/5
    Does anyone know how to achieve the above for continuous print?
    Your assistance in this matter is highly appreciated.
    BR,
    Jimmy

    Hi,
    You are trying to print the detailed aging report. Right?
    It seems that there is no way of "splitting" the page numbers within a collection report.
    The system could not count the pages for EACH customer.The total number per pages will be per whole document, and cannot be per business partner within the same document when using the formula currentpage().
    Regards,
    Jitin

  • Page Breaks in Repeating Frame's

    In my report, my query is a 184 column table. Select query is also a 184 column table.
    There are Repeating frames in my layout editor, each contains 10 columns. From the 2nd repeating frame onwards, the page break before property is "Yes". Now if, for the 1st repeating frame there is data (10 columns only) Then the rest of the page is blank. All the page break before property is "Yes" How do I avoid these blank pages

    Hi,
    the "page break" properties are only active in parent-child relationships. So if your frame1 is not expandable vertical, frame2 is no child object ob frame1 and so the property page break after of frame1 is not relevant for frame2. So change your layout, that frame2 is child of frame1 and frame3 is child of frame2, then the page break after will run as you expect. You can do this via the property vertical elasticity or via using an anchor between the frames.
    Regards
    Rainer

Maybe you are looking for