Oracle Scheduler Chain Step - Succeeds and Fails at the same time?

Hi,
I have a chain program that executes a script :-
exec DBMS_SCHEDULER.CREATE_PROGRAM (
program_name => 'xxxx_execute_script'
,program_type => 'EXECUTABLE'
,program_action => '/home/xxx/run_remote_xxxx.sh'
,number_of_arguments => 0
,enabled => true
,comments => 'execute drms shell script'
The script does a remote execute to a another script on a different machine.
I have a chain step setup as :-
exec DBMS_SCHEDULER.DEFINE_CHAIN_STEP (
chain_name => 'xxx_drms_manual_load',
step_name => 'STEP30',
program_name => 'drms_execute_script');
I have chain rules :-
(execute the script)
exec DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'xxx_drms_manual_load'
,condition => 'STEP20 succeeded'
,action => 'START STEP30'
,rule_name => 'drms_rule_030'
,comments => 'start drms step30 - execute_script'
(chain rule for failed - executes a stored procedure to sends a warning email)
exec DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'jpl_drms_manual_load'
,condition => 'STEP30 failed'
,action => 'start step31'
,rule_name => 'drms_rule_035'
,comments => 'drms - sends unix script error email'
(chain rule for succeeded - executes a stored procedure to check for certain processing codes)
exec DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'jpl_drms_manual_load'
,condition => 'STEP30 succeeded'
,action => 'START STEP40'
,rule_name => 'drms_rule_050'
,comments => 'start drms step40 - check for errors'
Everything has been running fine until a couple of days ago.
The job chain now seems to run Step 31 (failed) AND step40 (successful) ! How can this be?
All job steps run according to the oracle job log (all_SCHEDULER_JOB_RUN_DETAILS) - (STEP31 does not appear in the log - even though it runs - we recieve a warning email)
There no non zero return codes for the job steps.
Is there a way to see the return code from the execution of the script (STEP30) to see what the return code is ??
Thanks in advance,

Hi,
You can select from the dba_scheduler_job_run_details and filter on job name to track the execution progress of a chain.
Hope this helps,
Ravi.

Similar Messages

Error Running Oracle Apps and Discoverer at the same time

Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
Carlos

Hi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23

Running steps and sequences at the same time

Hi,
I need to run some steps and sequence at the same time in my application due to test time restrictions. I am using Teststand 2.0. Colud you please describe me the methodology.

Hi,
Synchronization Step types came in at version 2 and there should be an example in the \teststand\examples folder.
Regards
Ray Farmer
Regards
Ray Farmer

Backup to file system and sbt_tape at the same time?

hello!
is it possible to do a rman backup to disk and sbt_tape at the same time (just one backup, not two)? the reason is, that i want to copy the rman backup files from the local file system via robocopy to another server (in a different building), so that i can use them for fast restores in the case of a crash.
if not, what is the recommended strategy in this case? backups should be available on tape AND the file system of a different machine.
environment: oracle 10g, windows server 2008, commvault for backup on tape
thanks for your advice.
best regards,
christian

If you manually copy backupsets out of the FRA to another location, but still accessible as "local disks", you can use the CATALOG command in RMAN to "catalog" the copies.
Thus, if you opy or move files from the FRA to /mybackups/MYDB, you would use
"CATALOG START WITH /mybackups/MYDB" or individually "CATALOG BACKUPPIECE /mybackups/MYDB/backuppiece_1" etc
Once you have moved or removed the backupsets out of the FRA, you must use
"CROSSCHECK BACKUP"
and
"DELETE EXPIRED BACKUP"
to update the RMAN repository. Else, Oracle will continue to "account" for disks pace consumed by the BackupPieces in V$FLASH_RECOVERY_AREA_USAGE and will soon "run out of space".
You would do the same for ArchiveLogs (CROSSCHECK ARCHIVELOG ALL; DELETE EXPIRED ARCHIVELOG ALL) if your ArchiveLogs go to the FRA as USE_DB_RECOVERY_FILE_DEST

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How is it possible that the black ipad 2 64 gb is sold out in hole Sweden, Hong Kong, Shanghai, Boston and Memphis at the same time!?

How is it possible that the black ipad 2 64 gb is sold out in hole Sweden, Hong Kong, Shanghai, Boston and Memphis at the same time!?

Because Apple can't get enought of them made to cover the demand, obviously. The iPad has been extremely popular and would probably be in short supply in any case, but the various disasters that have struck portions of the supply chain can't have made things any easier.
Regards.

Running Reports 6i and 9i at the same time

I was wondering what the issues were with running Reports 6i and 9i at the same time. We are planning on up grading at a client, and I heard that there are some problems with doing this. I was thinking that installing them in different ORACLE_HOME's would help keep problems to a minimum. At home I have Reports 6i and 9i running, and I have not seen any problems.

We suggest you install 6i and 9i at different oracle home. There are no known issue about running 6i and 9i at the same time.
Thanks,
-Shaun Lin

Container resize and paint on the same time needed

Hi all,
I am trying to make a transparent window using screenshots and I am getting a flickering of the image I am drawing on the window.
I think this is happening because setLocation() method moves the window and makes the repaint but with the old graphics on it. When the paint() will be called probably the paint event will be executed after the move event so on the window the two Graphics will be painted. This is what I think that causes the flicker.
If anyone has an ideea of how can I make the move - setLocation() - and paint() in the same time please tell me!
Thanks,
Robert

You cannot do this with a UCM hunt group. CCX cannot play media to the caller after you invoke a Call Redirect or Call Consult Transfer.
You can do this if you configure the target users as contact center agents and use a Select Resource step. If none of the agents are available [ready] to take a call, you can play a welcome prompt or other actions that is interrupted if an agent becomes available. There are two noteworthy caveats to this:
1) You can only offer a call to one contact center user at a time. This would be analogous to a Longest Idle hunt group model.
2) There is a second branch that you will see on this step: Connected. Note that when an agent's phone is ringing, the caller is not in the queued branch of the step. The caller is hearing Network MoH.
This means in practice you will want to put the welcome message before whatever else you want to do with the call and let it complete.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Can I use a camera for application in Labview and VBAI at the same time ?

Dear all,
I'm trying to save an AVI file with Labview and make an image process with VBAI at the same time, in one machine.
The error : "Camera already in use" displayed.
My Camera is a GIGE and I work with Imaqdx. I've test the multicast mode but it only operate with several machines.
How can I do this ?
Thank's to help me,
Yoann B

I'm not necessarily saying that. It's been a while since I've used VBAI, so I don't remember all of the capabilities, but if VBAI can do the inspection and recording at the same time, you should be fine.
The trick is that only one program can access the camera at the same time. That application reserves the camera, thus making it unavailable to others.
Chris
Certified LabVIEW Architect
Certified TestStand Architect

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Oracle Scheduler Chain Step - Succeeds and Fails at the same time?

Similar Messages

Maybe you are looking for