Oracle Secure Backup is not Appeared in EM

Dear Sir,
i have tried to show Oracle Secure Back in my EM as described in its Admin Guide
a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
and open the emoms.properties file in a text editor.
b. Set osb_enabled=true and save the file.
c. Stop the Oracle Enterprise Manager Database Control console as follows:
emctl stop dbconsole
d. Restart the Oracle Enterprise Manager Database Control console as follows:
emctl start dbconsole
But after this setting i am not able to see any thing in my EM.
Any one has idea baout it, what reason it may be.....
I can access my Oracle Secure Backup by
https://<host name>:1158/....
Any Body has any idea, please help
Regards
Muhammad Hafeez

There is a separate forum for Oracle Secure Backup, You will get better response if you post it there.
Secure Backup
Daljit Singh

Similar Messages

Oracle secure backup "lsbackup " not showing in obtool

hi!
i am using oracle secure backup with virtual tape drive....
lsdev -lvlib:
Device type: library (virtual)
Model: [none]
Serial number: 82206a7c
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: auto
Min writable volumes: 0
UUID: d9916f34-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vlib
vt:
Device type: tape (virtual)
Model: [none]
Serial number: 96627110
In service: yes
Library: vlib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 1 minute, 9 seconds
Cleaning required: no
UUID: f2efc426-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vt
its working fine i use rman and took two backups....but i dont know where are they....on os i have two directory vlib(library) and one more was created 'vt'(tape drive).i know backups are in vlib but how to check them..through obtool ...it shows nothing..
please help.......
BACKUP 1:
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup datafile 4;
5> release channel ch1;
6> }
using target database control file instead of recovery catalog
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0nl1h7ao_1_1 tag=TAG20091222T061656 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
BACKUP 2 .......
RMAN> run
2> {
3> allocate channel ch1 device type 'SBT_TAPE';
4> backup datafile 3;
5> backup datafile 2;
6> release channel ch1;
7> }
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00003 name=/u01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0ol1h7nq_1_1 tag=TAG20091222T062354 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:45
Finished backup at 22-DEC-09
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00002 name=/u01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0pl1h7p7_1_1 tag=TAG20091222T062439 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
Edited by: Muhammad.Usman on Dec 22, 2009 8:51 PM

The configuration you have described is not supported. If you want to use a VTL you will need to purchase one from a supported VTL supplier.
OSB does not provide its own VTL.
Rich

Oracle Secure Backup 10.3.0.3.0 in Windows 2003 with IBM Tape Not Working

Hi,
I am currently implementing Oracle Secure Backup. My environment is this:
OS: Windows Server 2003 (32Bit) for all servers
Database: Oracle Database 11.2.0.1.0
Tape Library: IBM-ULT 3580-TD4
I will have to configure 2 machines to work with OSB: server01 and server02.
Server01:
This serves as the client, admin, mediaserver
Server02:
This will serve as the client, admin
When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
Help is very much appreciated. Thanks a lot guys!

I have resolved the issue. Ill close this thread. :))

Configuring Internal DELL RD1000 for Oracle Secure Backup

Hi all,
I have a Dell R710 server running Solaris 10 9/10 which has an internal Dell RD1000 drive. I intend to use this as a target for Oracle Secure Backup but am so far unable to configure the solaris sgen driver to see it as a valid tape/scsi drive.
iostat -En reveals the ff
c2t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: DELL Product: RD1000 Revision: 0053 Serial No:
Size: 160.04GB <160037691392 bytes>
Also after reboot
-bash-3.00# dmesg | grep -i RD1000
Feb 21 22:02:10 genunix: [ID 846691 kern.info] model DELL RD1000
however after following the installation guide i am still unable to see any /dev/scsi/changer or /dev/scsi/sequential directories.
Any help will be greatly appreciated.
Thanks

I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
Thanks
Rich

Licensing for Oracle Secure Backup Cloud Module

My company is looking at moving from our internal tape backup to Oracle (Cloud) Database Backup. We have questions about costs for licensing the Oracle Secure Backup Cloud Module. We have been using Oracle Secure Backup Express Edition and would like to know if there are additional API/License costs for using Oracle Secure Backup Cloud Module in additional to the $33/TB per month cost listed on the Oracle Cloud Database Backup page at https://cloud.oracle.com/database_backup?tabID=1394421701419.
We have spoken with 6 different sales and technical reps at Oracle and at Oracle Cloud and none have been able to provide a clear answer for this question. We have been directed to this forum, by the staff at Oracle Cloud.
Any feedback would be greatly appreciated.

I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
Thanks
Rich

How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
Anil

Hi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja

Oracle RAC and Oracle Secure Backup Express

I am building a new RAC environment - 7-Nodes on Linux.
We are very interested in reviewing Oracle Secure Backup, possible Oracle Secure Backup Express.
My understanding about Oracle Secur eBackup Express is it is licensed "free" as long as you are working with a single tape drive.
Does anyone know - does this apply to RAC as well?
Thanks

Please refer to the OSB licensing document for
specific differences between OSB-XE and OSB:
http://download-west.oracle.com/docs/cd/B32520_01/doc/
license.101/b25528/toc.htm
In general, we recommend you backup each RAC node to
insure all local files are protected which would mean
the OSB-XE edition would not be recommended since
OSB-XE is backup of one server.Thank you - I will review this.
.. and your White Papers regarding performance were just what I was looking for.

Checkpoints in Oracle Secure backup....

hi!
My question is that does Oracle Secure backup has "checkpoint " option...???.
Basically when we are backing very large databases so any error could accoured so we should define "checkpoint" so in case of some network or any other error , we can restart that backup from last checkpoint.
Please .....reply .....

The following policies exists under operations
obtool lsp operations .....
fullbackupcheckpointfrequency 8 GB [default]
incrbackupcheckpointfrequency 2 GB [default]
I'm not clear if this is just for Filesystem backups though, or if it works for RMAN too.
Rich

Oracle Secure Backup with partitioned SL3000

A Client has a partitioned SL3000 tape library with two Access Expansion Modules, T10000D drives, LTO6 drives and dual robotics.
Three Partitions - one for SAMFS including one AEM - this partition works fine.
Two partitions created for OSB - one for LTO6 and media and the other for T10000D and media due to mixed media not supported in OSB.
OSB 12.1 has been implemented, device configuration has been completed and verified. Library inventory completes successfully, when a test backup is started no media mounts to the tape drives. MTX utility for Linux has been implemented for test purposes - successful mounts using MTX was performed - a library inventory was then done using OSB and completed successfully identifying the media mounted in the drive that was initiated by MTX, a successful unload was then done using OSB.
We are unable to mount media using OSB.
Here is a output of devdump from OSB:
ob> dumpdev prd-mgmt2_tape_4
Oracle Secure Backup hardware error log for "prd-mgmt2_tape_4", version 1
      STK T10000D, prom/firmware id 4.07, serial number 579004000975
Tue Mar 31, 2015 at 12:05:31.057 (SAST) devtype: 26
   obexec: prd-mgmt2:/dev/sg4, args to wst__exec: handle=0x0
      accessed via host prd-mgmt2: Linux 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 09:13:42 PST 2014
      op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
   cdb: 00 00 00 00 00 00 tur
   sense data:
      70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
      00 00 00 00 00 00 40 01 00 00
         ec=0, sk=not ready, asc=0, ascq=0
         error is: unknown check condition
         flags: (none)
   returned status: code=unknown check condition,
      resid=0 (0x0), checks=0x0 []
Tue Mar 31, 2015 at 12:05:38.142 (SAST) devtype: 26
   obrobotd: /dev/sg4, args to wst__exec: handle=0x1
      accessed via host prd-mgmt2
      op=8 (rewind), buf=0x00, count=0 (0x0), parm=0x00
   cdb: 01 00 00 00 00 00 rewind
   sense data:
      70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
      00 01 00 00 00 00 40 01 00 00
         ec=0, sk=not ready, asc=0, ascq=0
         error is: unknown check condition
         flags: (none)
   returned status: code=unknown check condition,
      resid=0 (0x0), checks=0x0 []
Tue Mar 31, 2015 at 12:29:31.060 (SAST) devtype: 26
   obexec: /dev/sg4, args to wst__exec: handle=0x0
      accessed via host prd-mgmt2
      op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
   cdb: 00 00 00 00 00 00 tur
   sense data:
      70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
      00 00 00 00 00 00 40 01 00 00
         ec=0, sk=not ready, asc=0, ascq=0
         error is: unknown check condition
         flags: (none)
   returned status: code=unknown check condition,
      resid=0 (0x0), checks=0x0 []

I have resolved the issue. Ill close this thread. :))

Installation of Oracle Secure Backup 10.3.0.3 on RedHat EL6.2 x8664

Hi , My comany has got a new server to run RHEL6.2 x8664,
and Oracle Secure Backup 10.3.0.3 should be hosted in that machine.
when i begin installation , the installer quickly exit with errors:
Welcome to Oracle's setup program for Oracle Secure Backup. This
program loads Oracle Secure Backup software from the CD-ROM to a
filesystem directory of your choosing.
This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_LINUX64.
Please wait a moment while I learn about this host...mach_arch: Undefined variable.
ERROR: can't determine sufficient info about this machine to continue.
WHAT'S THE MATTER OF IT?

OSB 10.3 is not supported on Oracle Linux 6. The steps you've listed in that post render your installation unsupported.
You should install OSB 10.4.0.3.0 which is fully supported.
Thanks
Rich

Oracle Secure Backup error: 'No such file or directory'

Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
jun

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

Oracle Secure Backup on Windows: file permission problem?

Hi all.
I did a new Oracle Secure Backup installation.
I implemented a real simple domain:
a Linux box is the media/administrative server. Then I have some Windows and Linux Client.
On a Windows 2000 server SP4 box I'm experiencing an error.
On certain directories i get the following:
The directory is not a subdirectory of the root directory.
On certain files I get the following instead:
The directory name is invalid.
The OSB service is running under the local system account on the client.
Can you help me trouble this error?
Thanks
Giovanni

Thanks for your reply.
Disks are mounted using CIFS.
we got the fix for this, need to do the following changes.
# Turns off locking
echo 0 > /proc/fs/cifs/OplockEnabled
# Turns off inode caching
echo 0 > /proc/fs/cifs/LookupCacheEnabled
cheers...
Edited by: TJ_DBA on 14/02/2011 16:43

Oracle Secure Backup Module for the Amazon cloud

I want to backup a 11g r2 database in the amazon cloud s3 service. I have on premise database
11g r2 on windows 2008 r2 64 bit OS.
Supported platforms for Oracle Secure Backup Module for the cloud are Windows 32 bit. linux 32 bit and 64bit. Does that mean I cannot use this on my Windows box. Cloud module seems like java jar files which should run on Windows 32 bit as well as 64 bit.

Pl do not post duplicate threads - Oracle Secure Backup MOdule for Amazon Cloud S3
Srini

Monitor Oracle Secure Backup by 12c

Hi all,
Is there any way to monitor oracle secure backup by cloud control 12c.
regards,
Utp

The steps are as you reported in your initial thread:
I have tried to show Oracle Secure Back in my EM as described in its Admin Guide
a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
and open the emoms.properties file in a text editor.
b. Set osb_enabled=true and save the file.
c. Stop the Oracle Enterprise Manager Database Control console as follows:
emctl stop dbconsole
d. Restart the Oracle Enterprise Manager Database Control console as follows:
emctl start dbconsole
But after this setting i am not able to see any thing in my EM.
If this doesn't work, then please file a TAR

RMAN Backup to tape using Oracle Secure Backup

I am trying to take 11g R2 (11.2.0.3) database backup using RMAN. I am using Oracle Secure Backup for configuring virtual tape library and virtual tape drive.
Whenever, I am running the RMAN backup script it simply hangs. While checking the backup job status from Oracle Secure Backup web interface, the job status are displaying 'pending resource availability'.
On, furthur investigating the job, the following error message are displayed,
" Dispatching job to run on oradb. Drive or volume on which mount attempted is unusable".
Library and Tape Creation:
mkdev -t library -o -S 4 -a oradb:/vlib -v vlib
mkdev -t tape -o -a ora11:/vt -v -l vlib -d 1 vt
Not able to fix this error. Need help
Message was edited by: 799814

There is a VTL: http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/
really work well with OSB 10.3.0.3 64bit, the version of it, fully tested by me , is 1.2
The installation guide of it here:
mh virtual tape & library system.
Instructions assume reader is familiar with the kernel build process.
There are two sections of code to build.
- The kernel module
- The user-space daemons.
Kernel module mhvtl:
==================
1) Make sure the kernel-devel package to match your running kernel is installed.
e.g.
RedHat AS 4 & 5:
# rpm -qa|grep kernel
kernel-2.6.9-34.0.1.EL
kernel-devel-2.6.9-34.0.1.EL
kernel-2.6.9-5.EL
kernel-devel-2.6.9-5.EL
kernel-utils-2.4-13.1.80
SLES 9 & 10:
# rpm -qa|grep kernel
2) Extract the mhvtl source code.
# tar xvfz mhvtl-2012-04-04.tgz
3) Change directory into the kernel driver source.
# cd mhvtl-1.2/kernel/
# make
# make install
User space daemons:
===================
Pre-req for a running mhvtl
- sg3_utils (http://sg.danny.cz/sg/sg3_utils.html)
Pre-req to build/compile userspace:
- zlib-devel
* To build an RPM
===============
cp mhvtl-YYYY-MM-DD.tar.gz /usr/src/packages/SOURCE/
cd /usr/src/packages/SOURCE
rpmbuild -tb mhvtl-YYYY-MM-DD.tar.gz
<wait for rpm build to complete>
rpm -Uvh /usr/src/packages/RPMS/<cpu type>/mhvtl-1.2-z.<cpu type>.rpm
(The rpm install will create system group & accounts vtl)
- Note: For RedHat, replace 'packages' with 'redhat'
* To build from tar archive (Debian / Ubuntu):
============================================
apt-get install lsscsi
apt-get install sg3_utils
To limit damage that may occur by wayward daemons, I highly recommend creating
a group and user called 'vtl'
# /usr/sbin/groupadd --system vtl
# /usr/sbin/useradd --system -c "Vitrual Tape Library" -d /opt/vtl -g vtl -m vtl
Now build user space daemons:
From the parent directory where you extracted the source.
# cd mhvtl-1.2
Build the binaries
# make
Install the rc script into /etc/init.d/ and binaries to /usr/local/bin/
# make install
Start daemons:
/etc/init.d/mhvtl start
Test:
Note: Make sure the 'mtx' & 'lsscsi' utilities are installed
The virtual devices are attached to HBA #5 in this example.
e.g.
# lsscsi -g
[0:0:0:0]    disk    ATA      WDC WD1200BEVS-0 02.0 /dev/sda /dev/sg0
[3:0:0:0]    cd/dvd Optiarc DVD RW AD-7910A 1.D1 /dev/sr0 /dev/sg1
[5:0:0:0]    mediumx SPECTRA PYTHON           5500 /dev/sch0 /dev/sg6
[5:0:1:0]    tape    QUANTUM SDLT600          5500 /dev/st0 /dev/sg2
[5:0:2:0]    tape    QUANTUM SDLT600          5500 /dev/st1 /dev/sg3
[5:0:3:0]    tape    IBM      ULT3580-TD4      5500 /dev/st2 /dev/sg4
[5:0:4:0]    tape    IBM      ULT3580-TD4      5500 /dev/st3 /dev/sg5
# mtx -f /dev/sg6 status
Storage Changer /dev/sg6:4 Drives, 37 Slots ( 4 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
Data Transfer Element 2:Empty
Data Transfer Element 3:Empty
      Storage Element 1:Full :VolumeTag=SDLT01S3
      Storage Element 2:Full :VolumeTag=SDLT02S3
      Storage Element 3:Full :VolumeTag=SDLT03S3
      Storage Element 4:Full :VolumeTag=SDLT04S3
      Storage Element 5:Full :VolumeTag=SDLT05S3
      Storage Element 6:Full :VolumeTag=SDLT06S3
      Storage Element 7:Full :VolumeTag=SDLT07S3
      Storage Element 8:Full :VolumeTag=SDLT08S3
      Storage Element 9:Full :VolumeTag=SDLT09S3
      Storage Element 10:Empty
      Storage Element 11:Full :VolumeTag=ULT001L1
      Storage Element 12:Full :VolumeTag=ULT002L2
      Storage Element 13:Full :VolumeTag=ULT003L3
      Storage Element 14:Full :VolumeTag=ULT004L4
      Storage Element 15:Full :VolumeTag=ULT005L1
      Storage Element 16:Full :VolumeTag=ULT006L2
      Storage Element 17:Full :VolumeTag=ULT007L3
      Storage Element 18:Full :VolumeTag=ULT008L4
      Storage Element 19:Full :VolumeTag=ULT009L1
      Storage Element 20:Empty
      Storage Element 21:Full :VolumeTag=8MM001X4
      Storage Element 22:Full :VolumeTag=8MM002X4
      Storage Element 23:Full :VolumeTag=8MM003X4
      Storage Element 24:Full :VolumeTag=8MM004X4
      Storage Element 25:Empty
      Storage Element 26:Empty
      Storage Element 27:Empty
      Storage Element 28:Empty
      Storage Element 29:Empty
      Storage Element 30:Empty
      Storage Element 31:Full :VolumeTag=CLN001L1
      Storage Element 32:Full :VolumeTag=CLN002L1
      Storage Element 33:Full :VolumeTag=CLN003L1
      Storage Element 34 IMPORT/EXPORT:Empty
      Storage Element 35 IMPORT/EXPORT:Empty
      Storage Element 36 IMPORT/EXPORT:Empty
      Storage Element 37 IMPORT/EXPORT:Empty
Enjoy.
Please feel free in letting me know if this works for you.
Bug fixes and suggestions always welcome.
[email protected]
[email protected]

Oracle Secure Backup is not Appeared in EM

Similar Messages

Maybe you are looking for