Oracle Secure Backup Module for the Amazon  cloud

I want to backup a 11g r2 database in the amazon cloud s3 service. I have on premise database
11g r2 on windows 2008 r2 64 bit OS.
Supported platforms for Oracle Secure Backup Module for the cloud are Windows 32 bit. linux 32 bit and 64bit. Does that mean I cannot use this on my Windows box. Cloud module seems like java jar files which should run on Windows 32 bit as well as 64 bit.

Pl do not post duplicate threads - Oracle Secure Backup MOdule for Amazon Cloud S3
Srini

Similar Messages

  • Can the Oracle Secure Backup handle 64-bit inode numbers received from NDMP

    How many bytes will Oracle Secure Backup store for inode numbers received from NDMP file history? Can the Oracle Secure Backup handle 64-bit inode numbers?
    Thanks
    Hsing

    Moderator Action:
    This post has been relocated from the Storage Systems HARDWARE forum
    to the Oracle Secure Backup forum, for closer topic alignment.

  • RMAN Backup to tape using Oracle Secure Backup

    I am trying to take 11g R2 (11.2.0.3) database backup using RMAN. I am using Oracle Secure Backup for configuring virtual tape library and virtual tape drive.
    Whenever, I am running the RMAN backup script it simply hangs. While checking the backup job status from Oracle Secure Backup web interface, the job status are displaying 'pending resource availability'.
    On, furthur investigating the job, the following error message are displayed,
    " Dispatching job to run on oradb. Drive or volume on which mount attempted is unusable".
    Library and Tape Creation:
    mkdev -t library -o -S 4 -a oradb:/vlib -v vlib
    mkdev -t tape -o -a ora11:/vt -v -l vlib -d 1 vt
    Not able to fix this error. Need help
    Message was edited by: 799814

    There is a VTL: http://mhvtl-linux-virtual-tape-library-community-forums.966029.n3.nabble.com/
      really work well with OSB 10.3.0.3 64bit, the version of it, fully tested by me , is 1.2
    The installation guide of it here:
    mh virtual tape & library system.
    Instructions assume reader is familiar with the kernel build process.
    There are two sections of code to build.
    - The kernel module
    - The user-space daemons.
    Kernel module mhvtl:
    ==================
    1) Make sure the kernel-devel package to match your running kernel is installed.
    e.g.
    RedHat AS 4 & 5:
    # rpm -qa|grep kernel
    kernel-2.6.9-34.0.1.EL
    kernel-devel-2.6.9-34.0.1.EL
    kernel-2.6.9-5.EL
    kernel-devel-2.6.9-5.EL
    kernel-utils-2.4-13.1.80
    SLES 9 & 10:
    # rpm -qa|grep kernel
    2) Extract the mhvtl source code.
    # tar xvfz mhvtl-2012-04-04.tgz
    3) Change directory into the kernel driver source.
    # cd mhvtl-1.2/kernel/
    # make
    # make install
    User space daemons:
    ===================
    Pre-req for a running mhvtl
    - sg3_utils (http://sg.danny.cz/sg/sg3_utils.html)
    Pre-req to build/compile userspace:
    - zlib-devel
    * To build an RPM
      ===============
    cp mhvtl-YYYY-MM-DD.tar.gz /usr/src/packages/SOURCE/
    cd /usr/src/packages/SOURCE
    rpmbuild -tb mhvtl-YYYY-MM-DD.tar.gz
    <wait for rpm build to complete>
    rpm -Uvh /usr/src/packages/RPMS/<cpu type>/mhvtl-1.2-z.<cpu type>.rpm
    (The rpm install will create system group & accounts vtl)
    - Note: For RedHat, replace 'packages' with 'redhat'
    * To build from tar archive (Debian / Ubuntu):
      ============================================
    apt-get install lsscsi
    apt-get install sg3_utils
    To limit damage that may occur by wayward daemons, I highly recommend creating
    a group and user called 'vtl'
    # /usr/sbin/groupadd --system vtl
    # /usr/sbin/useradd --system -c "Vitrual Tape Library" -d /opt/vtl -g vtl -m vtl
    Now build user space daemons:
    From the parent directory where you extracted the source.
    # cd mhvtl-1.2
    Build the binaries
    # make
    Install the rc script into /etc/init.d/ and binaries to /usr/local/bin/
    # make install
    Start daemons:
    /etc/init.d/mhvtl start
    Test:
    Note: Make sure the 'mtx' & 'lsscsi' utilities are installed
    The virtual devices are attached to HBA #5 in this example.
    e.g.
    # lsscsi -g
    [0:0:0:0]    disk    ATA      WDC WD1200BEVS-0 02.0  /dev/sda  /dev/sg0
    [3:0:0:0]    cd/dvd  Optiarc  DVD RW AD-7910A  1.D1  /dev/sr0  /dev/sg1
    [5:0:0:0]    mediumx SPECTRA  PYTHON           5500  /dev/sch0  /dev/sg6
    [5:0:1:0]    tape    QUANTUM  SDLT600          5500  /dev/st0  /dev/sg2
    [5:0:2:0]    tape    QUANTUM  SDLT600          5500  /dev/st1  /dev/sg3
    [5:0:3:0]    tape    IBM      ULT3580-TD4      5500  /dev/st2  /dev/sg4
    [5:0:4:0]    tape    IBM      ULT3580-TD4      5500  /dev/st3  /dev/sg5
    # mtx -f /dev/sg6 status
      Storage Changer /dev/sg6:4 Drives, 37 Slots ( 4 Import/Export )
    Data Transfer Element 0:Empty
    Data Transfer Element 1:Empty
    Data Transfer Element 2:Empty
    Data Transfer Element 3:Empty
          Storage Element 1:Full :VolumeTag=SDLT01S3                           
          Storage Element 2:Full :VolumeTag=SDLT02S3                           
          Storage Element 3:Full :VolumeTag=SDLT03S3                           
          Storage Element 4:Full :VolumeTag=SDLT04S3                           
          Storage Element 5:Full :VolumeTag=SDLT05S3                           
          Storage Element 6:Full :VolumeTag=SDLT06S3                           
          Storage Element 7:Full :VolumeTag=SDLT07S3                           
          Storage Element 8:Full :VolumeTag=SDLT08S3                           
          Storage Element 9:Full :VolumeTag=SDLT09S3                           
          Storage Element 10:Empty
          Storage Element 11:Full :VolumeTag=ULT001L1                           
          Storage Element 12:Full :VolumeTag=ULT002L2                           
          Storage Element 13:Full :VolumeTag=ULT003L3                           
          Storage Element 14:Full :VolumeTag=ULT004L4                           
          Storage Element 15:Full :VolumeTag=ULT005L1                           
          Storage Element 16:Full :VolumeTag=ULT006L2                           
          Storage Element 17:Full :VolumeTag=ULT007L3                           
          Storage Element 18:Full :VolumeTag=ULT008L4                           
          Storage Element 19:Full :VolumeTag=ULT009L1                           
          Storage Element 20:Empty
          Storage Element 21:Full :VolumeTag=8MM001X4                           
          Storage Element 22:Full :VolumeTag=8MM002X4                           
          Storage Element 23:Full :VolumeTag=8MM003X4                           
          Storage Element 24:Full :VolumeTag=8MM004X4                           
          Storage Element 25:Empty
          Storage Element 26:Empty
          Storage Element 27:Empty
          Storage Element 28:Empty
          Storage Element 29:Empty
          Storage Element 30:Empty
          Storage Element 31:Full :VolumeTag=CLN001L1                           
          Storage Element 32:Full :VolumeTag=CLN002L1                           
          Storage Element 33:Full :VolumeTag=CLN003L1                           
          Storage Element 34 IMPORT/EXPORT:Empty
          Storage Element 35 IMPORT/EXPORT:Empty
          Storage Element 36 IMPORT/EXPORT:Empty
          Storage Element 37 IMPORT/EXPORT:Empty
    Enjoy.
    Please feel free in letting me know if this works for you.
    Bug fixes and suggestions always welcome.
    [email protected]
    [email protected]

  • Installation of Oracle Secure Backup 10.3.0.3 on RedHat EL6.2 x8664

    Hi , My comany has got a new server to run RHEL6.2 x8664,
         and Oracle Secure Backup 10.3.0.3 should be hosted in that machine.
        when i begin installation , the installer quickly exit with errors:
    Welcome to Oracle's setup program for Oracle Secure Backup.  This
    program loads Oracle Secure Backup software from the CD-ROM to a
    filesystem directory of your choosing.
    This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_LINUX64.
    Please wait a moment while I learn about this host...mach_arch: Undefined variable.
    ERROR: can't determine sufficient info about this machine to continue.
    WHAT'S THE MATTER OF IT?

    OSB 10.3 is not supported on Oracle Linux 6. The steps you've listed in that post render your installation unsupported.
    You should install OSB 10.4.0.3.0 which is fully supported.
    Thanks
    Rich

  • Oracle Secure Backup datasets Rman backup

    Hi all,
    I want use the scheduler on OSB, to  launch a shell script to backup a database by rman.
    I made a test, and the backup executed well. I created a dataset, like that:
    include host hostn01
    include path /u01/app/oracle/dummy
    after backup "/u01/app/oracle/admin/scripts/rman/full_db.sh"
    Script full_db.sh as:
    su - oracle -c "/u01/app/oracle/admin/scripts/rman/level0_db_tape.sh"
    The script above invoke the rman backup full, and finish without any errors.
    My question. It is possible to have a dataset without the include path for a dummy dir? like that or similar?
    include host hostn01
    "/u01/app/oracle/admin/scripts/rman/full_db.sh"
    The OSB version is 10.4.3
    Cumps,

    Hi
    You can use RMAN for Backup and Restore using Oracle Secure Backup. But the following has to met before the implementation.
    1. RMAN must connect through pre-authorised user
    2. pre-authorised OSB user's OSB class must have database backup and restore rights
    3. OSB user permissions must match those of Oracle Instance.
    Please check all the above....
    Thanks
    LaserSoft

  • Unable to see Oracle Secure Backup Selections in EM (10g-10.2.0.1)

    I cannot see the Oracle Secure Backup choices on the maintenance tab page.
    I see Backup/Recovery and Backup/Recovery Settings but no third column Oracle Secure Backup.
    I logon to EM as SYS.
    Any ideas ?
    Thanks

    If you go to the maintenance tab on your EM, are there a couple of links under "Oracle Secure Backup" heading. I don't have this showing on my page. If I look at any of the Oracle demo pages I see it.
    Like I said it is a feature of 10gR2....which I have.

  • Oracle Secure Backup (OSB) Cloud Module for Amazon

    Dear,
    I am trying to install cloud module in EC2 instance for Oracle DB backup. I tried with different OS with different java versions an it always fails.
    I remember that one year ago I installed this in seconds no single problem at all but now I did everything but don't want to work.
    If some one have some ideas please share.
    Thanks in advance.
    oracle@localhost* ~$ java -jar osbws_install.jar -AWSID ***** -AWSKey ******-otnUser ****** -otnPass ****** -walletDir $OSB_WALLET_DIR -configFile $OSB_CONFIG_DIR/osbcm.conf -libDir $OSB_LIB_DIR -Location eu-west-1a
    Oracle Secure Backup Database Web-Service Install Tool, build 2013-10-30.0001
    AWS credentials are valid.
    Exception in thread "main" java.net.UnknownServiceException: no content-type
    at java.net.URLConnection.getContentHandler(URLConnection.java:1251)
    at java.net.URLConnection.getContent(URLConnection.java:749)
    at oracle.osbws.install.ConfigSetup.config(ConfigSetup.java:284)
    at oracle.osbws.install.ConfigSetup.main(ConfigSetup.java:1195)
    Info
    No firewall, no iptables.
    Linux hostanme.com 3.10.0-123.20.1.el7.x86_64 #1 SMP Wed Jan 21 09:45:55 EST 2015 x86_64 x86_64 x86_64 GNU/Linux

    Thanks for replay.
    Just want to share.
    The solution is very simple. Just need to have latest  version of this installer. I found it here and it works.
    Oracle Secure Backup Cloud Module for Amazon S3

  • Licensing for Oracle Secure Backup Cloud Module

    My company is looking at moving from our internal tape backup to Oracle (Cloud) Database Backup.  We have questions about costs for licensing the Oracle Secure Backup Cloud Module.  We have been using Oracle Secure Backup Express Edition and would like to know if there are additional API/License costs for using Oracle Secure Backup Cloud Module in additional to the $33/TB per month cost listed on the Oracle Cloud Database Backup page at https://cloud.oracle.com/database_backup?tabID=1394421701419.
    We have spoken with 6 different sales and technical reps at Oracle and at Oracle Cloud and none have been able to provide a clear answer for this question.  We have been directed to this forum, by the staff at Oracle Cloud.
    Any feedback would be greatly appreciated.

    I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
    However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
    Thanks
    Rich

  • Configuring Internal DELL RD1000 for Oracle Secure Backup

    Hi all,
    I have a Dell R710 server running Solaris 10 9/10 which has an internal Dell RD1000 drive. I intend to use this as a target for Oracle Secure Backup but am so far unable to configure the solaris sgen driver to see it as a valid tape/scsi drive.
    iostat -En reveals the ff
    c2t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
    Vendor: DELL Product: RD1000 Revision: 0053 Serial No:
    Size: 160.04GB <160037691392 bytes>
    Also after reboot
    -bash-3.00# dmesg | grep -i RD1000
    Feb 21 22:02:10 genunix: [ID 846691 kern.info] model DELL RD1000
    however after following the installation guide i am still unable to see any /dev/scsi/changer or /dev/scsi/sequential directories.
    Any help will be greatly appreciated.
    Thanks

    I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
    However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
    Thanks
    Rich

  • Oracle Secure Backup with partitioned SL3000

    A Client has a partitioned SL3000 tape library with two Access Expansion Modules, T10000D drives, LTO6 drives and dual robotics.
    Three Partitions - one for SAMFS including one AEM - this partition works fine.
    Two partitions created for OSB - one for LTO6 and media and the other for T10000D and media due to mixed media not supported in OSB.
    OSB 12.1 has been implemented, device configuration has been completed and verified. Library inventory completes successfully, when a test backup is started no media mounts to the tape drives. MTX utility for Linux has been implemented for test purposes - successful mounts using MTX was performed - a library inventory was then done using OSB and completed successfully identifying the media mounted in the drive that was initiated by MTX, a successful unload was then done using OSB.
    We are unable to mount media using OSB.
    Here is a output of devdump from OSB:
    ob> dumpdev prd-mgmt2_tape_4
    Oracle Secure Backup hardware error log for "prd-mgmt2_tape_4", version 1
          STK T10000D, prom/firmware id 4.07, serial number 579004000975
    Tue Mar 31, 2015 at 12:05:31.057 (SAST)  devtype: 26
       obexec: prd-mgmt2:/dev/sg4, args to wst__exec: handle=0x0
          accessed via host prd-mgmt2: Linux 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 09:13:42 PST 2014
          op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
       cdb: 00 00 00 00 00 00 tur
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 00 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
          resid=0 (0x0), checks=0x0 []
    Tue Mar 31, 2015 at 12:05:38.142 (SAST)  devtype: 26
       obrobotd: /dev/sg4, args to wst__exec: handle=0x1
          accessed via host prd-mgmt2
          op=8 (rewind), buf=0x00, count=0 (0x0), parm=0x00
       cdb: 01 00 00 00 00 00 rewind
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 01 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
          resid=0 (0x0), checks=0x0 []
    Tue Mar 31, 2015 at 12:29:31.060 (SAST)  devtype: 26
       obexec: /dev/sg4, args to wst__exec: handle=0x0
          accessed via host prd-mgmt2
          op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
       cdb: 00 00 00 00 00 00 tur
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 00 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
            resid=0 (0x0), checks=0x0 []

    I have resolved the issue. Ill close this thread. :))

  • Oracle Secure Backup 10.3.0.3.0 in Windows 2003 with IBM Tape Not Working

    Hi,
    I am currently implementing Oracle Secure Backup. My environment is this:
    OS: Windows Server 2003 (32Bit) for all servers
    Database: Oracle Database 11.2.0.1.0
    Tape Library: IBM-ULT 3580-TD4
    I will have to configure 2 machines to work with OSB: server01 and server02.
    Server01:
    This serves as the client, admin, mediaserver
    Server02:
    This will serve as the client, admin
    When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
    When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
    Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
    Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
    When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
    Help is very much appreciated. Thanks a lot guys!

    I have resolved the issue. Ill close this thread. :))

  • Error while starting Oracle Secure Backup Service on Windows

    Hi,
    I've installed an Oracle 10gR2 database, and an OSB on a Windows XP (SP2) machine, and when trying to start the service (Oracle Secure Backup Services) I got the following error :
    "Unknown():Unable to load dynamic library'./php_osb.dll'-The operating system cannot run %1"
    This error message pops up 2-3 times, and I cannot login to OSB web page.
    My database works ok, but I cannot "test" OSB
    Anyone else had the same problem? Any ideas ?
    Thanks,
    Panagiotis

    Hi-- could you please describe your administrative domain?
    I need to know the operating systems on each of the
    clients and the OSB admin server. Also, does 'obtool' CLI
    tool work? Do any of the machines act as an apache webserver
    for another application? Is there any other backup service
    running on any of the machines?
    thanks,
    Judy
    I noticed that when re-installing the OSB without the
    Administrative Server (only Media Server and Client)
    I got no errors at all (but still cannot connect from
    another Administratice Server to my machine)

  • How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

    Hello,
    We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
    Can anyone please suggest me how to install and configure OSB.
    Regards,
    Anil

    Hi
    Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
    For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
    Regards,
    Mitja

  • Oracle Secure Backup is not Appeared in EM

    Dear Sir,
    i have tried to show Oracle Secure Back in my EM as described in its Admin Guide
    a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
    and open the emoms.properties file in a text editor.
    b. Set osb_enabled=true and save the file.
    c. Stop the Oracle Enterprise Manager Database Control console as follows:
    emctl stop dbconsole
    d. Restart the Oracle Enterprise Manager Database Control console as follows:
    emctl start dbconsole
    But after this setting i am not able to see any thing in my EM.
    Any one has idea baout it, what reason it may be.....
    I can access my Oracle Secure Backup by
    https://<host name>:1158/....
    Any Body has any idea, please help
    Regards
    Muhammad Hafeez

    There is a separate forum for Oracle Secure Backup, You will get better response if you post it there.
    Secure Backup
    Daljit Singh

  • Oracle RAC and Oracle Secure Backup Express

    I am building a new RAC environment - 7-Nodes on Linux.
    We are very interested in reviewing Oracle Secure Backup, possible Oracle Secure Backup Express.
    My understanding about Oracle Secur eBackup Express is it is licensed "free" as long as you are working with a single tape drive.
    Does anyone know - does this apply to RAC as well?
    Thanks

    Please refer to the OSB licensing document for
    specific differences between OSB-XE and OSB:
    http://download-west.oracle.com/docs/cd/B32520_01/doc/
    license.101/b25528/toc.htm
    In general, we recommend you backup each RAC node to
    insure all local files are protected which would mean
    the OSB-XE edition would not be recommended since
    OSB-XE is backup of one server.Thank you - I will review this.
    .. and your White Papers regarding performance were just what I was looking for.

Maybe you are looking for

  • What's the simplest method of adding a date field in a form in DW(CS3)?

    I'm creating a form that among other things has a date field where the user will need to input a date. I'd like to make it a standard date field where as soon as the user clicks on the field they get a pop-up of a mini calendar to select a date from.

  • Servlets and JNI

    Hi, We have a C library which does financial computations and some of our customers have expressed the need to access our library from their servlets. This is why we have developed a JNI wrapper which encapsulates all functionality of our library. No

  • EclipseLink Error looking up external Transaction resource under JNDI name

    I want to verify my EJB 3.0 setup for a Java EE project to be deployed on Weblogic 10.3.3 (11gR2) - however when trying to run the JUnit test from eclipse I keep getting the following exception : Exception [EclipseLink-23004] (Eclipse Persistence Ser

  • Conversion of .dwg format

    Hi, I am using Location Appliance 2700 Serie, and I must import a plant in WCS. According to "Cisco 2700 Series Wireless Location Appliance - Deployment Guide", the only two importable formats are: .jgps and .bmps. I have a plant in .dwg format. Can

  • How to move move and link FCPX music files?

    The Library/Apple Loops/... file is now over 30GB, leaving very little overhead on my system drive.  I would like to move this whole directory to a second internal drive and link FCPX to that location.  Haven't found a way to change the folder link i