Oracle Secure Backup on Windows: file permission problem?
Hi all.
I did a new Oracle Secure Backup installation.
I implemented a real simple domain:
a Linux box is the media/administrative server. Then I have some Windows and Linux Client.
On a Windows 2000 server SP4 box I'm experiencing an error.
On certain directories i get the following:
The directory is not a subdirectory of the root directory.
On certain files I get the following instead:
The directory name is invalid.
The OSB service is running under the local system account on the client.
Can you help me trouble this error?
Thanks
Giovanni
Thanks for your reply.
Disks are mounted using CIFS.
we got the fix for this, need to do the following changes.
# Turns off locking
echo 0 > /proc/fs/cifs/OplockEnabled
# Turns off inode caching
echo 0 > /proc/fs/cifs/LookupCacheEnabled
cheers...
Edited by: TJ_DBA on 14/02/2011 16:43
Similar Messages
-
Error while starting Oracle Secure Backup Service on Windows
Hi,
I've installed an Oracle 10gR2 database, and an OSB on a Windows XP (SP2) machine, and when trying to start the service (Oracle Secure Backup Services) I got the following error :
"Unknown():Unable to load dynamic library'./php_osb.dll'-The operating system cannot run %1"
This error message pops up 2-3 times, and I cannot login to OSB web page.
My database works ok, but I cannot "test" OSB
Anyone else had the same problem? Any ideas ?
Thanks,
PanagiotisHi-- could you please describe your administrative domain?
I need to know the operating systems on each of the
clients and the OSB admin server. Also, does 'obtool' CLI
tool work? Do any of the machines act as an apache webserver
for another application? Is there any other backup service
running on any of the machines?
thanks,
Judy
I noticed that when re-installing the OSB without the
Administrative Server (only Media Server and Client)
I got no errors at all (but still cannot connect from
another Administratice Server to my machine) -
Oracle Secure Backup error: 'No such file or directory'
Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
junYou can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from. -
Hi,
I am currently implementing Oracle Secure Backup. My environment is this:
OS: Windows Server 2003 (32Bit) for all servers
Database: Oracle Database 11.2.0.1.0
Tape Library: IBM-ULT 3580-TD4
I will have to configure 2 machines to work with OSB: server01 and server02.
Server01:
This serves as the client, admin, mediaserver
Server02:
This will serve as the client, admin
When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
Help is very much appreciated. Thanks a lot guys!I have resolved the issue. Ill close this thread. :))
-
Oracle Secure Backup Installation
Hi all,
It is the first time I am installing and configuring an Oracle Secure Backup. I have installed Oracle Secure Backup 10.4.0.3 at the Administrative sever (windows 7x64) just to test it before I install it to the production server (windows server 2003). The problem is the following:
After the installation I try to login to the webtool with the Admin user as described in the documentation. I enter the Admin password I set in the installation but it throws a login incorrect error. I know the password is the correct one as I have also tried to paste it from a notepad.
What should I check?
Thank you in advance.The username is admin with a lowercase a, see if that helps. Otherwise you should check the log files for the webserver to see where the problem might be.
Are you putting your admin server on a Windows machine for a specific reason? It's fully supported but that won't give you the best performance, I'd suggest you run a Linux admin/meda server.
Thanks
Rich -
Oracle Secure Backup Module for the Amazon cloud
I want to backup a 11g r2 database in the amazon cloud s3 service. I have on premise database
11g r2 on windows 2008 r2 64 bit OS.
Supported platforms for Oracle Secure Backup Module for the cloud are Windows 32 bit. linux 32 bit and 64bit. Does that mean I cannot use this on my Windows box. Cloud module seems like java jar files which should run on Windows 32 bit as well as 64 bit.Pl do not post duplicate threads - Oracle Secure Backup MOdule for Amazon Cloud S3
Srini -
Oracle Secure Backup is not Appeared in EM
Dear Sir,
i have tried to show Oracle Secure Back in my EM as described in its Admin Guide
a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
and open the emoms.properties file in a text editor.
b. Set osb_enabled=true and save the file.
c. Stop the Oracle Enterprise Manager Database Control console as follows:
emctl stop dbconsole
d. Restart the Oracle Enterprise Manager Database Control console as follows:
emctl start dbconsole
But after this setting i am not able to see any thing in my EM.
Any one has idea baout it, what reason it may be.....
I can access my Oracle Secure Backup by
https://<host name>:1158/....
Any Body has any idea, please help
Regards
Muhammad HafeezThere is a separate forum for Oracle Secure Backup, You will get better response if you post it there.
Secure Backup
Daljit Singh -
Oracle RAC and Oracle Secure Backup Express
I am building a new RAC environment - 7-Nodes on Linux.
We are very interested in reviewing Oracle Secure Backup, possible Oracle Secure Backup Express.
My understanding about Oracle Secur eBackup Express is it is licensed "free" as long as you are working with a single tape drive.
Does anyone know - does this apply to RAC as well?
ThanksPlease refer to the OSB licensing document for
specific differences between OSB-XE and OSB:
http://download-west.oracle.com/docs/cd/B32520_01/doc/
license.101/b25528/toc.htm
In general, we recommend you backup each RAC node to
insure all local files are protected which would mean
the OSB-XE edition would not be recommended since
OSB-XE is backup of one server.Thank you - I will review this.
.. and your White Papers regarding performance were just what I was looking for. -
Oracle secure backup "lsbackup " not showing in obtool
hi!
i am using oracle secure backup with virtual tape drive....
lsdev -lvlib:
Device type: library (virtual)
Model: [none]
Serial number: 82206a7c
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: auto
Min writable volumes: 0
UUID: d9916f34-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vlib
vt:
Device type: tape (virtual)
Model: [none]
Serial number: 96627110
In service: yes
Library: vlib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 1 minute, 9 seconds
Cleaning required: no
UUID: f2efc426-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vt
its working fine i use rman and took two backups....but i dont know where are they....on os i have two directory vlib(library) and one more was created 'vt'(tape drive).i know backups are in vlib but how to check them..through obtool ...it shows nothing..
please help.......
BACKUP 1:
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup datafile 4;
5> release channel ch1;
6> }
using target database control file instead of recovery catalog
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0nl1h7ao_1_1 tag=TAG20091222T061656 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
BACKUP 2 .......
RMAN> run
2> {
3> allocate channel ch1 device type 'SBT_TAPE';
4> backup datafile 3;
5> backup datafile 2;
6> release channel ch1;
7> }
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00003 name=/u01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0ol1h7nq_1_1 tag=TAG20091222T062354 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:45
Finished backup at 22-DEC-09
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00002 name=/u01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0pl1h7p7_1_1 tag=TAG20091222T062439 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
Edited by: Muhammad.Usman on Dec 22, 2009 8:51 PMThe configuration you have described is not supported. If you want to use a VTL you will need to purchase one from a supported VTL supplier.
OSB does not provide its own VTL.
Rich -
Oracle Secure Backup (OSB) Cloud Module for Amazon
Dear,
I am trying to install cloud module in EC2 instance for Oracle DB backup. I tried with different OS with different java versions an it always fails.
I remember that one year ago I installed this in seconds no single problem at all but now I did everything but don't want to work.
If some one have some ideas please share.
Thanks in advance.
oracle@localhost* ~$ java -jar osbws_install.jar -AWSID ***** -AWSKey ******-otnUser ****** -otnPass ****** -walletDir $OSB_WALLET_DIR -configFile $OSB_CONFIG_DIR/osbcm.conf -libDir $OSB_LIB_DIR -Location eu-west-1a
Oracle Secure Backup Database Web-Service Install Tool, build 2013-10-30.0001
AWS credentials are valid.
Exception in thread "main" java.net.UnknownServiceException: no content-type
at java.net.URLConnection.getContentHandler(URLConnection.java:1251)
at java.net.URLConnection.getContent(URLConnection.java:749)
at oracle.osbws.install.ConfigSetup.config(ConfigSetup.java:284)
at oracle.osbws.install.ConfigSetup.main(ConfigSetup.java:1195)
Info
No firewall, no iptables.
Linux hostanme.com 3.10.0-123.20.1.el7.x86_64 #1 SMP Wed Jan 21 09:45:55 EST 2015 x86_64 x86_64 x86_64 GNU/LinuxThanks for replay.
Just want to share.
The solution is very simple. Just need to have latest version of this installer. I found it here and it works.
Oracle Secure Backup Cloud Module for Amazon S3 -
Can the Oracle Secure Backup handle 64-bit inode numbers received from NDMP
How many bytes will Oracle Secure Backup store for inode numbers received from NDMP file history? Can the Oracle Secure Backup handle 64-bit inode numbers?
Thanks
HsingModerator Action:
This post has been relocated from the Storage Systems HARDWARE forum
to the Oracle Secure Backup forum, for closer topic alignment. -
Monitor Oracle Secure Backup by 12c
Hi all,
Is there any way to monitor oracle secure backup by cloud control 12c.
regards,
UtpThe steps are as you reported in your initial thread:
I have tried to show Oracle Secure Back in my EM as described in its Admin Guide
a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
and open the emoms.properties file in a text editor.
b. Set osb_enabled=true and save the file.
c. Stop the Oracle Enterprise Manager Database Control console as follows:
emctl stop dbconsole
d. Restart the Oracle Enterprise Manager Database Control console as follows:
emctl start dbconsole
But after this setting i am not able to see any thing in my EM.
If this doesn't work, then please file a TAR -
Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
AnilHi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja -
Oracle Secure Backup- Error during configuration on Linux server
Dear Gurus
We are trying to configure Oracle Secure backup with the Oracle StorageTek tape library, on the Oracle Linux server for testing purposes..
We are getting the following errors when we run the command to configure "discoverdev -ic -h orasecbak":
Checking each library to associate discovered drive(s) with DTE...
Assigning DTE 1 in library ora-sec-bk_lib_2 for drive ora-sec-bk_tape_1 with serial number: HUJ4411YD9
Error: dte2 didn't report serial number to ora-sec-bk_lib_2 library
Assigning DTE 1 in library ora-sec-bk_lib_1 for drive ora-sec-bk_tape_2 with serial number: HUJ4411YD9
Error: dte2 didn't report serial number to ora-sec-bk_lib_1 library
The tape library is connected to the server using two fiber connections..thats why the sg_map -i -x is giving output twice for the same serial number...
.we installed Oracle Secure Backup 12.1
Regards,
MisbahWhat about disk space on your database server, is that OK? How about free RAM on all the systems?
You can also check other kernel settings to see if you are running out of kernel message buffer space or shared memory.
Thanks
Rich -
Unable to see Oracle Secure Backup Selections in EM (10g-10.2.0.1)
I cannot see the Oracle Secure Backup choices on the maintenance tab page.
I see Backup/Recovery and Backup/Recovery Settings but no third column Oracle Secure Backup.
I logon to EM as SYS.
Any ideas ?
ThanksIf you go to the maintenance tab on your EM, are there a couple of links under "Oracle Secure Backup" heading. I don't have this showing on my page. If I look at any of the Oracle demo pages I see it.
Like I said it is a feature of 10gR2....which I have.
Maybe you are looking for
-
Synced with another iTunes library
There was a recovery performed on my computer and I have now lost all of my music on the computer. After re-installing iTunes I tried to sync my iPod but I get the message The iPod"*" is snyced with another iTunes library. An iPod can only be synced
-
Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2
-
I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?
-
I see there is a show by tags feature in the ios app. How does tagging work?
-
When using my iMac the screen judders momentarily
Mu imac screen judders, freezes momentarily then goes back to normal. Annoying more than anything but I ask whether this cd be anything potentially serious?