Oracle Secure Backup with partitioned SL3000
A Client has a partitioned SL3000 tape library with two Access Expansion Modules, T10000D drives, LTO6 drives and dual robotics.
Three Partitions - one for SAMFS including one AEM - this partition works fine.
Two partitions created for OSB - one for LTO6 and media and the other for T10000D and media due to mixed media not supported in OSB.
OSB 12.1 has been implemented, device configuration has been completed and verified. Library inventory completes successfully, when a test backup is started no media mounts to the tape drives. MTX utility for Linux has been implemented for test purposes - successful mounts using MTX was performed - a library inventory was then done using OSB and completed successfully identifying the media mounted in the drive that was initiated by MTX, a successful unload was then done using OSB.
We are unable to mount media using OSB.
Here is a output of devdump from OSB:
ob> dumpdev prd-mgmt2_tape_4
Oracle Secure Backup hardware error log for "prd-mgmt2_tape_4", version 1
STK T10000D, prom/firmware id 4.07, serial number 579004000975
Tue Mar 31, 2015 at 12:05:31.057 (SAST) devtype: 26
obexec: prd-mgmt2:/dev/sg4, args to wst__exec: handle=0x0
accessed via host prd-mgmt2: Linux 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 09:13:42 PST 2014
op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
cdb: 00 00 00 00 00 00 tur
sense data:
70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
00 00 00 00 00 00 40 01 00 00
ec=0, sk=not ready, asc=0, ascq=0
error is: unknown check condition
flags: (none)
returned status: code=unknown check condition,
resid=0 (0x0), checks=0x0 []
Tue Mar 31, 2015 at 12:05:38.142 (SAST) devtype: 26
obrobotd: /dev/sg4, args to wst__exec: handle=0x1
accessed via host prd-mgmt2
op=8 (rewind), buf=0x00, count=0 (0x0), parm=0x00
cdb: 01 00 00 00 00 00 rewind
sense data:
70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
00 01 00 00 00 00 40 01 00 00
ec=0, sk=not ready, asc=0, ascq=0
error is: unknown check condition
flags: (none)
returned status: code=unknown check condition,
resid=0 (0x0), checks=0x0 []
Tue Mar 31, 2015 at 12:29:31.060 (SAST) devtype: 26
obexec: /dev/sg4, args to wst__exec: handle=0x0
accessed via host prd-mgmt2
op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
cdb: 00 00 00 00 00 00 tur
sense data:
70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
00 00 00 00 00 00 40 01 00 00
ec=0, sk=not ready, asc=0, ascq=0
error is: unknown check condition
flags: (none)
returned status: code=unknown check condition,
resid=0 (0x0), checks=0x0 []
I have resolved the issue. Ill close this thread. :))
Similar Messages
-
Oracle Secure Backup- Error during configuration on Linux server
Dear Gurus
We are trying to configure Oracle Secure backup with the Oracle StorageTek tape library, on the Oracle Linux server for testing purposes..
We are getting the following errors when we run the command to configure "discoverdev -ic -h orasecbak":
Checking each library to associate discovered drive(s) with DTE...
Assigning DTE 1 in library ora-sec-bk_lib_2 for drive ora-sec-bk_tape_1 with serial number: HUJ4411YD9
Error: dte2 didn't report serial number to ora-sec-bk_lib_2 library
Assigning DTE 1 in library ora-sec-bk_lib_1 for drive ora-sec-bk_tape_2 with serial number: HUJ4411YD9
Error: dte2 didn't report serial number to ora-sec-bk_lib_1 library
The tape library is connected to the server using two fiber connections..thats why the sg_map -i -x is giving output twice for the same serial number...
.we installed Oracle Secure Backup 12.1
Regards,
MisbahWhat about disk space on your database server, is that OK? How about free RAM on all the systems?
You can also check other kernel settings to see if you are running out of kernel message buffer space or shared memory.
Thanks
Rich -
Oracle secure backup "lsbackup " not showing in obtool
hi!
i am using oracle secure backup with virtual tape drive....
lsdev -lvlib:
Device type: library (virtual)
Model: [none]
Serial number: 82206a7c
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: auto
Min writable volumes: 0
UUID: d9916f34-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vlib
vt:
Device type: tape (virtual)
Model: [none]
Serial number: 96627110
In service: yes
Library: vlib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 1 minute, 9 seconds
Cleaning required: no
UUID: f2efc426-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vt
its working fine i use rman and took two backups....but i dont know where are they....on os i have two directory vlib(library) and one more was created 'vt'(tape drive).i know backups are in vlib but how to check them..through obtool ...it shows nothing..
please help.......
BACKUP 1:
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup datafile 4;
5> release channel ch1;
6> }
using target database control file instead of recovery catalog
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0nl1h7ao_1_1 tag=TAG20091222T061656 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
BACKUP 2 .......
RMAN> run
2> {
3> allocate channel ch1 device type 'SBT_TAPE';
4> backup datafile 3;
5> backup datafile 2;
6> release channel ch1;
7> }
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00003 name=/u01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0ol1h7nq_1_1 tag=TAG20091222T062354 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:45
Finished backup at 22-DEC-09
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00002 name=/u01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0pl1h7p7_1_1 tag=TAG20091222T062439 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
Edited by: Muhammad.Usman on Dec 22, 2009 8:51 PMThe configuration you have described is not supported. If you want to use a VTL you will need to purchase one from a supported VTL supplier.
OSB does not provide its own VTL.
Rich -
Hi,
I am currently implementing Oracle Secure Backup. My environment is this:
OS: Windows Server 2003 (32Bit) for all servers
Database: Oracle Database 11.2.0.1.0
Tape Library: IBM-ULT 3580-TD4
I will have to configure 2 machines to work with OSB: server01 and server02.
Server01:
This serves as the client, admin, mediaserver
Server02:
This will serve as the client, admin
When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
Help is very much appreciated. Thanks a lot guys!I have resolved the issue. Ill close this thread. :))
-
Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
AnilHi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja -
Oracle RAC and Oracle Secure Backup Express
I am building a new RAC environment - 7-Nodes on Linux.
We are very interested in reviewing Oracle Secure Backup, possible Oracle Secure Backup Express.
My understanding about Oracle Secur eBackup Express is it is licensed "free" as long as you are working with a single tape drive.
Does anyone know - does this apply to RAC as well?
ThanksPlease refer to the OSB licensing document for
specific differences between OSB-XE and OSB:
http://download-west.oracle.com/docs/cd/B32520_01/doc/
license.101/b25528/toc.htm
In general, we recommend you backup each RAC node to
insure all local files are protected which would mean
the OSB-XE edition would not be recommended since
OSB-XE is backup of one server.Thank you - I will review this.
.. and your White Papers regarding performance were just what I was looking for. -
Oracle Secure Backup Installation
Hi all,
It is the first time I am installing and configuring an Oracle Secure Backup. I have installed Oracle Secure Backup 10.4.0.3 at the Administrative sever (windows 7x64) just to test it before I install it to the production server (windows server 2003). The problem is the following:
After the installation I try to login to the webtool with the Admin user as described in the documentation. I enter the Admin password I set in the installation but it throws a login incorrect error. I know the password is the correct one as I have also tried to paste it from a notepad.
What should I check?
Thank you in advance.The username is admin with a lowercase a, see if that helps. Otherwise you should check the log files for the webserver to see where the problem might be.
Are you putting your admin server on a Windows machine for a specific reason? It's fully supported but that won't give you the best performance, I'd suggest you run a Linux admin/meda server.
Thanks
Rich -
Installation of Oracle Secure Backup 10.3.0.3 on RedHat EL6.2 x8664
Hi , My comany has got a new server to run RHEL6.2 x8664,
and Oracle Secure Backup 10.3.0.3 should be hosted in that machine.
when i begin installation , the installer quickly exit with errors:
Welcome to Oracle's setup program for Oracle Secure Backup. This
program loads Oracle Secure Backup software from the CD-ROM to a
filesystem directory of your choosing.
This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_LINUX64.
Please wait a moment while I learn about this host...mach_arch: Undefined variable.
ERROR: can't determine sufficient info about this machine to continue.
WHAT'S THE MATTER OF IT?OSB 10.3 is not supported on Oracle Linux 6. The steps you've listed in that post render your installation unsupported.
You should install OSB 10.4.0.3.0 which is fully supported.
Thanks
Rich -
Is Oracle Secure Backup tool popularly used today?
Is Oracle Secure Backup tool popularly used today?
Which tap management tool is the most popularly used third-party software with Oracle database?We use ARCServe for tape backups. Seems to function fine.
-
Oracle Secure Backup (OSB) Cloud Module for Amazon
Dear,
I am trying to install cloud module in EC2 instance for Oracle DB backup. I tried with different OS with different java versions an it always fails.
I remember that one year ago I installed this in seconds no single problem at all but now I did everything but don't want to work.
If some one have some ideas please share.
Thanks in advance.
oracle@localhost* ~$ java -jar osbws_install.jar -AWSID ***** -AWSKey ******-otnUser ****** -otnPass ****** -walletDir $OSB_WALLET_DIR -configFile $OSB_CONFIG_DIR/osbcm.conf -libDir $OSB_LIB_DIR -Location eu-west-1a
Oracle Secure Backup Database Web-Service Install Tool, build 2013-10-30.0001
AWS credentials are valid.
Exception in thread "main" java.net.UnknownServiceException: no content-type
at java.net.URLConnection.getContentHandler(URLConnection.java:1251)
at java.net.URLConnection.getContent(URLConnection.java:749)
at oracle.osbws.install.ConfigSetup.config(ConfigSetup.java:284)
at oracle.osbws.install.ConfigSetup.main(ConfigSetup.java:1195)
Info
No firewall, no iptables.
Linux hostanme.com 3.10.0-123.20.1.el7.x86_64 #1 SMP Wed Jan 21 09:45:55 EST 2015 x86_64 x86_64 x86_64 GNU/LinuxThanks for replay.
Just want to share.
The solution is very simple. Just need to have latest version of this installer. I found it here and it works.
Oracle Secure Backup Cloud Module for Amazon S3 -
Tape Drive and Library Compatibility Matrix - Oracle Secure Backup Express
Does Oracle Secure Backup Express support IBM System Storage TS3200 Tape Library with two Tape Drives?
Regards
RadoThat library is listed on the support matrix which applies to both OSB-XE and OSB:
http://www.oracle.com/technology/products/secure-backup/pdf/Tape_Devices10.2.pdf
Keep in mind that OSB-XE licensing restricts usage to one server direct attached to one tape drive. Per your post, your library has 2 tape drives which cannot be used with OSB-XE but certainly could with OSB. -
Configuring Internal DELL RD1000 for Oracle Secure Backup
Hi all,
I have a Dell R710 server running Solaris 10 9/10 which has an internal Dell RD1000 drive. I intend to use this as a target for Oracle Secure Backup but am so far unable to configure the solaris sgen driver to see it as a valid tape/scsi drive.
iostat -En reveals the ff
c2t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: DELL Product: RD1000 Revision: 0053 Serial No:
Size: 160.04GB <160037691392 bytes>
Also after reboot
-bash-3.00# dmesg | grep -i RD1000
Feb 21 22:02:10 genunix: [ID 846691 kern.info] model DELL RD1000
however after following the installation guide i am still unable to see any /dev/scsi/changer or /dev/scsi/sequential directories.
Any help will be greatly appreciated.
ThanksI don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
Thanks
Rich -
Secure Backup with PowerVault 124T?
Does anyone know if Oracle Secure Backup is supported with / or will work with Dell PowerVault 124T LTO-3 Autoloader? I looked on the compatibility matrix, but it's not on there. Although there are other Dell products that are similar (like 126T, 130T . . . ) I didn't see the 124T.
I suppose it would work, but just seeing if anyone has this set up with the PV124T and if it's working well.
Thanksnevermind, I found a good answer at
Trying to setup drive and library -
Is Oracle Secure Backup Express "free"?
Hi:
Oracle Secure Backup Express is free when licensing the database? or it's licensed separetly? For instance... Oracle Standard Edition...
Regards
rOracle Secure Backup Express is free. It works with all editions of the Oracle database. Please refer to the licensing documentation for specifics:
http://download.oracle.com/docs/cd/E14812_01/doc/doc.103/e12836/toc.htm
Donna -
Licensing for Oracle Secure Backup Cloud Module
My company is looking at moving from our internal tape backup to Oracle (Cloud) Database Backup. We have questions about costs for licensing the Oracle Secure Backup Cloud Module. We have been using Oracle Secure Backup Express Edition and would like to know if there are additional API/License costs for using Oracle Secure Backup Cloud Module in additional to the $33/TB per month cost listed on the Oracle Cloud Database Backup page at https://cloud.oracle.com/database_backup?tabID=1394421701419.
We have spoken with 6 different sales and technical reps at Oracle and at Oracle Cloud and none have been able to provide a clear answer for this question. We have been directed to this forum, by the staff at Oracle Cloud.
Any feedback would be greatly appreciated.I don't know about this tape not appearing to the OS, some other OS related documentation would help you there. This may be due to the fact that this is a removable disk storage device, rather than actual tape.
However I have checked the OSB tape support matrix and this device is not listed, so this is not supported for use with OSB.
Thanks
Rich
Maybe you are looking for
-
How can I sync the contacts in my phone with those on my MacBook Pro? I already have an iCloud account, and everything else (calendars,music, etc.I is already synched) but the contacts won't.
-
Hi, I am trying to get the create order values from Xquery, I am getting the following error in weblogic logs. Did anyone face this issue and resolved ####<Apr 26, 2011 12:22:12 PM IST> <Error> <oms> <uranus> <OSMServer> <ExecuteThread: '14' for queu
-
Idoc error- Balance in transaction currency
Dear Experts, In we02, I found idoc error with the following messages: Balance in transaction currency Message no. F5 702 Diagnosis A balance has occurred in transaction currency 'XXX' with the following details: Exchange rate '00', amount ' 1.413.69
-
Hi, Here is my code <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx"
-
I am having trouble applying video transitions between a few clips, other clips there is no problem. When it doesn't work I get a message that says "insufficient content for edit". The material I am working with I believe has enough of a handle to ap