Oracle Secure Backup

Hi,
I have the problem with OSB 10.2. I can not get the file system backup and
I get following error.
admin/1.1
Type backup solaris
Level full
Family (null)
Encryption off
Scheduled time 06/19.18:06
Introduction time 2008/06/19.18:06
Earliest exec time 06/19.18:06
Last update time 2008/06/19.18:21
Expire time never
State pending resource availability
Priority 100
Privileged op no
Run on host solaris
Requires host solaris and null family and any device
Deferred because a required device is not available
Attempts 2
Log
2008/06/19.18:06:11 Job created.
2008/06/19.18:06:11 Dispatching job to run on administrative server.
2008/06/19.18:06:34 Drive or volume on which mount attempted is unusable.
- My Tape Device is SONY-SDX 550V and it is not in oracle tape drive support list.
- OSB 10.2.0.2
- Windows 2003 Operatin System
- I went through the ob_drives file under ORACLE BACKUP HOME/device and added SDX 550V entry n this file and
- I restarted Oracle_Secure_Backup service. But it does not work again.
Your comment will be appreciated.

Thank you for your help and negotiating to solve this problem.
I am deploying your suggestion with two different type of tape drives
1. Hp DAT 72 7438A existing in Oracle Tape Device Certified List
2. SONY SDX-550V which is not exist in Oracle Tape Device Certified List
Right now I am working on # 2 (SONY SDX-550V)
the only modification in my configuration was using of new volume instead of
old one and try to mount this new volume in write mount in
Webtool --> Manage --> Drives.
ob> lsjob --log admin/2.1
Job ID Sched time Contents State
admin/2.1 06/26.12:54 backup solaris completed with warni
ngs at 2008/06/26.12:56 - one or more warnings or non-critical errors reported
2008/06/26.12:54:35 Job created.
2008/06/26.12:54:35 Dispatching job to run on administrative server.
2008/06/26.12:56:41 Backup completed with status "one or more warnings or no
n-critical errors reported".
2008/06/26.12:56:41 (Diagnostic data: 0x20008F06/114, dev_delay 0, data_
delay -1.)
2008/06/26.12:56:41 Job completed with warnings.
12:55:33 OBTR: record storage set to internal memory
12:55:33 ATAL: reserved drive obt, cookie 0x8D246811
12:55:34 OBTR: obsd=1, is_job=1, is_priv=0, os=7
12:55:34 OBTR: rights established for user admin, class admin
12:55:34 SUUI: user info root/root, enbank.ir/a.rahmani
12:55:34 PBDF: +d:/test
12:55:34 MAIN: using blocking factor 128 from media defaults/policies
12:55:34 STTY: background terminal I/O or is a tty
12:55:34 MAIN: interactive
12:55:34 SET: volume has no expiration time
12:55:34 CNPC: data host reports this butype_info:
12:55:34 CNPC: tar (attr 0x57587D7A: B_FL, B_DIRECT, R_DIRECT, B_INCR, R_INC
R, R_UTF8, B_FH_DIR)
12:55:34 CNPC: DIRECT = y
12:55:34 CNPC: HISTORY = y
12:55:34 CNPC: LEVEL = 0
12:55:34 A_O: from qlm__open: drive not configured in library (OB library m
gr)
12:55:35 RLE: connecting to volume/archive database host
12:55:35 RLE: device obt (raw device "//./obt0")
12:55:35 RLE: mount_info is valid
12:55:35 RLE: qdb__device_spec_se reports vol_oid 0, arch_oid 0
12:55:35 A_O: using max blocking factor 128 from media defaults/policies
12:55:35 A_O: tape device is local
Warning: unknown device type. This device is not supported by Oracle Secure Back
up
Warning: and is therefore not guaranteed to work with Oracle's driver.
12:55:35 A_O: Devname: SONY,SDX-550V,0100
12:55:35 Info version: 11
12:55:35 WS version: 10.2
12:55:35 Driver version: 10.2
12:55:35 Max DMA: 2097152
12:55:35 Blocksize in use: 65536
12:55:35 Query frequency: 1048576
12:55:35 Rewind on close: false
12:55:35 Can compress: true
12:55:35 Compression enabled: false
12:55:35 8200 media: false
12:55:35 Error threshold: 8%
12:55:35 Remaining tape: 0
12:55:35 A_GB: ar_block at 0x15F2000, size=2097152
12:55:35 A_GB: ar_block_enc at 0x1802000, size=2097152
12:55:35 GLMT: returning "", code = 0x0
12:55:35 VLBR: from chk_lm_tag: "", code = 0x0
12:55:43 VLBR: tag on label just read: ""
12:55:43 VLBR: master tag now ""
12:55:43 RLE: noticed volume VOL000003, file 1, section 1, vltime 121447119
7, vowner SYSTEM, voltag
12:55:43 RLE: qdb__noticed_se reports vol_oid 102, arch_oid 102
(alv) backup image label is valid, file 1, section 1
(ial) invalidate backup image label (was valid)
12:55:43 ULVI: set mh db volume id "VOL000003" (retid ""), volume oid 102, c
ode 0
12:55:43 ULTG: set mh db tag "" (retid ""), volume oid 102, code 0
12:55:43 CALE: created backup section oid list entry for oid 102
12:55:43 ARVI: resetting volume id from nil to VOL000003
Warning: unable to set compression on: bad parameter (OB scsi device driver)
12:55:47 ACFD: positioning (SCSI LOCATE) is available for this device
12:55:47 ARVI: resetting volume id from VOL000003 to VOL000004
Warning: unable to set compression on: bad parameter (OB scsi device driver)
12:55:47 ACFD: positioning (SCSI LOCATE) is available for this device
12:55:47 RCVW: volume "VOL000003" / vuuid b3d66f47-720f-4de5-87cc-f569100617
3b reserved for writing
12:55:47 CREA: tape position after open_archive() is 000000000000
12:55:47 GLMT: returning "", code = 0x0
12:55:47 IDXC: local index file is D:/OSB/admin/history/host/solaris/08.06.2
6.$raw.0
12:55:47 CREA: history has null volume tag because none found on volume or l
abel
Backup started on Thu Jun 26 2008 at 12:55:33
12:55:47 RLE: overwrite volume VOL000003, file 1, section 1, vltime 1214471
197, vowner SYSTEM, voltag
12:55:47 RLE: qdb__overwrite_se reports vol_oid 0, arch_oid 0
12:55:47 VLBW: on entry, l->tag = "", master tag = "", bot = 1
12:55:47 VLBW: setting voltag from "" to ""
12:55:47 VLBW: volume is not content-managed
12:55:47 RLE: write volume VOL000004, file 1, section 1, vltime 1214472333,
vowner SYSTEM, voltag
12:55:47 RLE: qdb__write_se reports vol_oid 103, arch_oid 0
12:55:47 VSLW: reading volume record for oid 103
12:55:47 VSLW: set last write time for volume oid 103
(alv) backup image label is not valid
(ial) invalidate backup image label (was valid)
12:55:47 ULVI: set mh db volume id "VOL000004" (retid ""), volume oid 103, c
ode 0
12:55:47 ULTG: set mh db tag "" (retid ""), volume oid 103, code 0
12:55:47 RLE: set vol size to 0
12:55:47 RLE: qdb__set_vol_size_se reports vol_oid 0, arch_oid 0
12:55:47 RLE: set kb remaining to "invalid or unknown"
12:55:47 RLE: qdb__set_kb_rem_se reports vol_oid 0, arch_oid 0
Volume label:
Intro time: Thu Jun 26 12:02:39 2008
Volume UUID: d1c16c42-cd5c-414f-9a9a-03d419ad5944
Volume ID: VOL000004
Volume sequence: 1
Volume set owner: SYSTEM
Volume set created: Thu Jun 26 12:55:33 2008
Original UUID: d1c16c42-cd5c-414f-9a9a-03d419ad5944
Archive label:
File number: 1
File section: 1
Owner: SYSTEM
Client host: solaris
Backup level: 0
S/w compression: no
Archive created: Thu Jun 26 12:55:33 2008
Archive owner UUID: 7d4ca79e-914f-493d-b6f3-83978ed4ca5b
Owner class UUID: e96f2753-3165-4069-a531-30f88c69862d
Encryption: off
12:55:47 RCVW: volume "VOL000004" / vuuid d1c16c42-cd5c-414f-9a9a-03d419ad59
44 reserved for writing
12:55:47 SNP: using NDMP protocol version 4
12:55:47 FLDB: flush drive-buffered data to medium
12:56:06 FLDB: flush complete
12:56:06 BNPC: volume position "00000001" added to s_vol_start_pos
12:56:06 BNPC: initial volume label "VOL000004" added to s_vids, s_last_sect
ion 1
12:56:06 BNPC: initial volume tag "" added to s_vtags, s_last_section 1
12:56:06 BNPC: data service doesn't implement restartable backup for d:/test
12:56:06 BNPC: environment variable BEGINTREE = 1
12:56:06 BNPC: environment variable NAME = d:/test
12:56:06 BNPC: environment variable BLEVEL = 0
12:56:06 BNPC: environment variable STARTED = 1
12:56:06 BNPC: environment variable IS_LAST = 1
12:56:06 BNPC: environment variable EX2KTYPE =
12:56:06 BNPC: environment variable VOLI = VOL000004
12:56:06 BNPC: environment variable VOLI =
12:56:06 BNPC: environment variable DATA_BLOCK_SIZE = 64
12:56:06 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
12:56:06 SMWB: setting mover window to infinity for backup
12:56:11 MLIS: mover listen ok for local connection
12:56:11 APNI: a preferred network interface does not apply to this connecti
on
12:56:11 BNPC: directing data service to connect to mover
12:56:11 PPVL: obtar option OB_RB = 10.2
12:56:11 PPVL: obtar option OB_STAT = 1
12:56:11 PPVL: obtar option OB_BDF = 1
12:56:11 PPVL: obtar option OB_DEBUG = 1
12:56:11 PPVL: obtar option OB_DEBUG = 1
12:56:11 PPVL: obtar option OB_DEBUG = 1
12:56:11 PPVL: obtar option OB_DEBUG = 1
12:56:11 PPVL: obtar option OB_VERBOSE = 1
12:56:11 PPVL: obtar option OB_CLIENT = solaris
12:56:11 PPVL: obtar option OB_LEVEL = 0
12:56:11 PPVL: obtar option OB_BE_ROOT = 1
12:56:11 PPVL: obtar option OB_STAT = 1
12:56:11 PPVL: obtar option OB_INDEX = 1
12:56:11 PPVL: obtar option OB_WRITE_HISTORY_FILE = 1
12:56:11 PPVL: obtar option OB_VOLUME_LABEL = 1
12:56:11 PPVL: obtar option OB_SKIP_CDFS = 1
12:56:11 PPVL: obtar option OB_DEVICE = obt
12:56:11 PPVL: obtar option OB_BLOCKING_FACTOR = 128
12:56:11 PPVL: obtar option OB_VERIFY_ARCHIVE = no
12:56:11 PPVL: obtar option OB_PQT = 1048576
12:56:11 DSIN: 2GB+ files are supported, 2GB+ directories are supported
12:56:11 SETC: successfully changed identity to enbank.ir/a.rahmani
12:56:11 BNPC: issuing NDMP_DATA_START_BACKUP
12:56:11 NTEV: Caching event log pathnames.
12:56:11 BNPC: started OSB NDMP backup of solaris to obt
12:56:11 NTEV: Application event log at C:\WINDOWS\system32\config\AppEvent.
Evt
12:56:11 NTEV: Internet Explorer event log at C:\WINDOWS\System32\Config\Int
ernet Explorer.evt
12:56:11 NTEV: ODiag event log at C:\WINDOWS\system32\config\ODiag.evt
12:56:11 NTEV: OSession event log at C:\WINDOWS\system32\config\OSession.evt
12:56:11 NTEV: Security event log at C:\WINDOWS\System32\config\SecEvent.Evt
12:56:11 NTEV: System event log at C:\WINDOWS\system32\config\SysEvent.Evt
12:56:11 NTRG: Caching registry hive data.
12:56:11 SIFI: don't change index filtering state (it's off)
Dumping all files in D:/TEST
D:/TEST/
D:/TEST/burtscript-1.6.tar.gz
D:/TEST/config.batch
D:/TEST/config.batch.org
D:/TEST/ft
D:/TEST/ft.org
D:/TEST/glibc-32bit-2.4-31.1.x86_64.rpm
D:/TEST/osb-10.2.0.2_linux32_cdrom.zip
D:/TEST/osb.10.1.0.3_Express.linux32.zip
D:/TEST/sonytape_linux_v2.6.tar.tar
12:56:19 TRWK: as a result of this backup, exit value changed from -1 to 0
12:56:19 MNPO: data service halted with reason=successful
12:56:19 SNPD: Data Service reported bytes processed 0x4C60000
12:56:19 SNPD: stopping NDMP data service (to transition to idle state)
12:56:19 MNPO: mover halted with reason=connection closed
12:56:19 MGS: ms.record_size 65536, ms.record_num 0x4C6, ms.bytes_moved 0x4
C60000
12:56:19 MNPO: operation successful
12:56:19 BNPC: finished OSB NDMP backup with status 0
12:56:19 BNPC: end of backup; bytes written 0x4C60000
12:56:19 CREA: as a result of this backup, exit value changed from -1 to 0
12:56:21 A_T: suppressing filemark output due to NDMP having written one
12:56:21 A_T: writing marker label; here it is:
Volume label:
Intro time: Thu Jun 26 12:02:39 2008
Volume UUID: d1c16c42-cd5c-414f-9a9a-03d419ad5944
Volume ID: VOL000004
Volume sequence: 1
Volume set owner: SYSTEM
Volume set created: Thu Jun 26 12:55:33 2008
Original UUID: d1c16c42-cd5c-414f-9a9a-03d419ad5944
Archive label:
File number: 2
File section: 1
Owner: SYSTEM
Client host: solaris
Backup level: 0
S/w compression: no
Archive created: Thu Jun 26 12:55:33 2008
Encryption: off
Marker: End of data
12:56:21 VLBW: on entry, l->tag = "", master tag = "", bot = 0
12:56:22 VLBW: setting voltag from "" to ""
12:56:22 VLBW: volume is not content-managed
12:56:22 RLE: set kb remaining to 0
12:56:22 RLE: qdb__set_kb_rem_se reports vol_oid 0, arch_oid 0
12:56:22 RLE: commit write, no next volume id specified
12:56:22 RLE: qdb__commit_write_se reports vol_oid 103, arch_oid 103
12:56:22 VLBW: first backup section OID set to 103
12:56:22 CALE: created backup section oid list entry for oid 103
12:56:22 RLE: set kb remaining to 0
12:56:22 RLE: qdb__set_kb_rem_se reports vol_oid 0, arch_oid 0
12:56:22 A_T: writing two more FMs
(alv) backup image label is not valid
12:56:40 CREA: setting last section flag for oid 103
Backup complete on Thu Jun 26 2008 at 12:56:21
12:56:40 QREX: exit status upon entry is 0
12:56:40 QREX: released reservation on tape drive obt
12:56:40 QREX: reading section record for oid 103
12:56:40 QREX: set last section flag for oid 103
12:56:40 RDB: reading volume record for oid 103
12:56:40 RDB: reading section record for oid 103
12:56:40 RDB: adding record for oid 103 (file 1, section 1) to section list
12:56:40 RDB: file 1 has all 1 required sections; clearing incomplete backu
p flags
12:56:41 RDB: reading section record for oid 103
12:56:41 RDB: cleared incomplete backup flag for oid 103
12:56:41 RDB: 1 volumes in volume list
12:56:41 RDB: volume oid 103 reports first:last files of 1:1
12:56:41 RDB: marking volume oid 103 as authoritative
12:56:41 VMA: reading volume record for oid 103
12:56:41 VMA: set authoritative flag for oid 103
12:56:41 QREX: released writable volume reservation on b3d66f47-720f-4de5-87
cc-f5691006173b
12:56:41 QREX: released writable volume reservation on d1c16c42-cd5c-414f-9a
9a-03d419ad5944
12:56:41 QREX: [1836] connecting to solaris to import and/or delete ascii in
dex file for client solaris
Backup statistics:
status 0
devices obt
devices 1
volumes VOL000004
voltags (null)
file 1
host solaris
encryption off
start_time Thu Jun 26 2008 at 12:55:33 (1214472333)
end_time Thu Jun 26 2008 at 12:56:21 (1214472381)
backup_time Thu Jun 26 2008 at 12:55:33 (1214472333)
entries_scanned 10
kbytes_scanned 0
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 19
directories 1
hardlinks 0
symlinks 0
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 0
dev_kbytes 78217
dev_iosecs 48
dev_iorate 1.7 MB/S
wrt_iosecs 34
wrt_iorate 2.4 MB/S
physical_blks_written 78208
write_errors 0
physical_blks_read 0
read_errors 0
error_rate 0%
path d:/test completed, status 0
12:56:41 RLYX: exit status 0; checking allocs...
12:56:41 RLYX: from mm__check_all: 1
12:56:41 RLYX: exit status changed to 114
ob>

Similar Messages

  • Oracle Secure Backup 10.3.0.3.0 in Windows 2003 with IBM Tape Not Working

    Hi,
    I am currently implementing Oracle Secure Backup. My environment is this:
    OS: Windows Server 2003 (32Bit) for all servers
    Database: Oracle Database 11.2.0.1.0
    Tape Library: IBM-ULT 3580-TD4
    I will have to configure 2 machines to work with OSB: server01 and server02.
    Server01:
    This serves as the client, admin, mediaserver
    Server02:
    This will serve as the client, admin
    When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
    When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
    Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
    Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
    When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
    Help is very much appreciated. Thanks a lot guys!

    I have resolved the issue. Ill close this thread. :))

  • Error while starting Oracle Secure Backup Service on Windows

    Hi,
    I've installed an Oracle 10gR2 database, and an OSB on a Windows XP (SP2) machine, and when trying to start the service (Oracle Secure Backup Services) I got the following error :
    "Unknown():Unable to load dynamic library'./php_osb.dll'-The operating system cannot run %1"
    This error message pops up 2-3 times, and I cannot login to OSB web page.
    My database works ok, but I cannot "test" OSB
    Anyone else had the same problem? Any ideas ?
    Thanks,
    Panagiotis

    Hi-- could you please describe your administrative domain?
    I need to know the operating systems on each of the
    clients and the OSB admin server. Also, does 'obtool' CLI
    tool work? Do any of the machines act as an apache webserver
    for another application? Is there any other backup service
    running on any of the machines?
    thanks,
    Judy
    I noticed that when re-installing the OSB without the
    Administrative Server (only Media Server and Client)
    I got no errors at all (but still cannot connect from
    another Administratice Server to my machine)

  • How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

    Hello,
    We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
    Can anyone please suggest me how to install and configure OSB.
    Regards,
    Anil

    Hi
    Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
    For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
    Regards,
    Mitja

  • Oracle Secure Backup is not Appeared in EM

    Dear Sir,
    i have tried to show Oracle Secure Back in my EM as described in its Admin Guide
    a. Navigate to the ORACLE_HOME/hostname_SID/sysman/config directory
    and open the emoms.properties file in a text editor.
    b. Set osb_enabled=true and save the file.
    c. Stop the Oracle Enterprise Manager Database Control console as follows:
    emctl stop dbconsole
    d. Restart the Oracle Enterprise Manager Database Control console as follows:
    emctl start dbconsole
    But after this setting i am not able to see any thing in my EM.
    Any one has idea baout it, what reason it may be.....
    I can access my Oracle Secure Backup by
    https://<host name>:1158/....
    Any Body has any idea, please help
    Regards
    Muhammad Hafeez

    There is a separate forum for Oracle Secure Backup, You will get better response if you post it there.
    Secure Backup
    Daljit Singh

  • Oracle RAC and Oracle Secure Backup Express

    I am building a new RAC environment - 7-Nodes on Linux.
    We are very interested in reviewing Oracle Secure Backup, possible Oracle Secure Backup Express.
    My understanding about Oracle Secur eBackup Express is it is licensed "free" as long as you are working with a single tape drive.
    Does anyone know - does this apply to RAC as well?
    Thanks

    Please refer to the OSB licensing document for
    specific differences between OSB-XE and OSB:
    http://download-west.oracle.com/docs/cd/B32520_01/doc/
    license.101/b25528/toc.htm
    In general, we recommend you backup each RAC node to
    insure all local files are protected which would mean
    the OSB-XE edition would not be recommended since
    OSB-XE is backup of one server.Thank you - I will review this.
    .. and your White Papers regarding performance were just what I was looking for.

  • Oracle Secure Backup- Error during configuration on Linux server

    Dear Gurus
    We are trying to configure Oracle Secure backup with the Oracle StorageTek tape library, on the Oracle Linux server for testing purposes..
    We are getting the following errors when we run the command to configure "discoverdev -ic -h orasecbak":
    Checking each library to associate discovered drive(s) with DTE...
      Assigning DTE 1 in library ora-sec-bk_lib_2 for drive ora-sec-bk_tape_1 with serial number: HUJ4411YD9
    Error: dte2 didn't report serial number to ora-sec-bk_lib_2 library
      Assigning DTE 1 in library ora-sec-bk_lib_1 for drive ora-sec-bk_tape_2 with serial number: HUJ4411YD9
    Error: dte2 didn't report serial number to ora-sec-bk_lib_1 library
    The tape library is connected to the server using two fiber connections..thats why the sg_map -i -x is giving output twice for the same serial number...
    .we installed Oracle Secure Backup 12.1
    Regards,
    Misbah

    What about disk space on your database server, is that OK? How about free RAM on all the systems?
    You can also check other kernel settings to see if you are running out of kernel message buffer space or shared memory.
    Thanks
    Rich

  • Oracle secure  backup "lsbackup " not showing in obtool

    hi!
    i am using oracle secure backup with virtual tape drive....
    lsdev -lvlib:
    Device type: library (virtual)
    Model: [none]
    Serial number: 82206a7c
    In service: yes
    Debug mode: no
    Barcode reader: default (hardware-selected)
    Barcodes required: no
    Auto clean: no
    Clean interval: (not set)
    Clean using emptiest: no
    Ejection type: auto
    Min writable volumes: 0
    UUID: d9916f34-cdec-102c-a9cf-000c2912137c
    Attachment 1:
    Host: osb
    Raw device: /vlib
    vt:
    Device type: tape (virtual)
    Model: [none]
    Serial number: 96627110
    In service: yes
    Library: vlib
    DTE: 1
    Automount: yes
    Error rate: 8
    Query frequency: [undetermined]
    Debug mode: no
    Blocking factor: (default)
    Max blocking factor: (default)
    Current tape: [unknown]
    Use list: all
    Drive usage: 1 minute, 9 seconds
    Cleaning required: no
    UUID: f2efc426-cdec-102c-a9cf-000c2912137c
    Attachment 1:
    Host: osb
    Raw device: /vt
    its working fine i use rman and took two backups....but i dont know where are they....on os i have two directory vlib(library) and one more was created 'vt'(tape drive).i know backups are in vlib but how to check them..through obtool ...it shows nothing..
    please help.......
    BACKUP 1:
    RMAN> run
    2> {
    3> allocate channel ch1 device type sbt;
    4> backup datafile 4;
    5> release channel ch1;
    6> }
    using target database control file instead of recovery catalog
    allocated channel: ch1
    channel ch1: sid=130 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    Starting backup at 22-DEC-09
    channel ch1: starting full datafile backupset
    channel ch1: specifying datafile(s) in backupset
    input datafile fno=00004 name=/u01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
    channel ch1: starting piece 1 at 22-DEC-09
    channel ch1: finished piece 1 at 22-DEC-09
    piece handle=0nl1h7ao_1_1 tag=TAG20091222T061656 comment=API Version 2.0,MMS Version 10.3.0.1
    channel ch1: backup set complete, elapsed time: 00:00:25
    Finished backup at 22-DEC-09
    released channel: ch1
    BACKUP 2 .......
    RMAN> run
    2> {
    3> allocate channel ch1 device type 'SBT_TAPE';
    4> backup datafile 3;
    5> backup datafile 2;
    6> release channel ch1;
    7> }
    allocated channel: ch1
    channel ch1: sid=130 devtype=SBT_TAPE
    channel ch1: Oracle Secure Backup
    Starting backup at 22-DEC-09
    channel ch1: starting full datafile backupset
    channel ch1: specifying datafile(s) in backupset
    input datafile fno=00003 name=/u01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
    channel ch1: starting piece 1 at 22-DEC-09
    channel ch1: finished piece 1 at 22-DEC-09
    piece handle=0ol1h7nq_1_1 tag=TAG20091222T062354 comment=API Version 2.0,MMS Version 10.3.0.1
    channel ch1: backup set complete, elapsed time: 00:00:45
    Finished backup at 22-DEC-09
    Starting backup at 22-DEC-09
    channel ch1: starting full datafile backupset
    channel ch1: specifying datafile(s) in backupset
    input datafile fno=00002 name=/u01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
    channel ch1: starting piece 1 at 22-DEC-09
    channel ch1: finished piece 1 at 22-DEC-09
    piece handle=0pl1h7p7_1_1 tag=TAG20091222T062439 comment=API Version 2.0,MMS Version 10.3.0.1
    channel ch1: backup set complete, elapsed time: 00:00:25
    Finished backup at 22-DEC-09
    released channel: ch1
    Edited by: Muhammad.Usman on Dec 22, 2009 8:51 PM

    The configuration you have described is not supported. If you want to use a VTL you will need to purchase one from a supported VTL supplier.
    OSB does not provide its own VTL.
    Rich

  • Unable to see Oracle Secure Backup Selections in EM (10g-10.2.0.1)

    I cannot see the Oracle Secure Backup choices on the maintenance tab page.
    I see Backup/Recovery and Backup/Recovery Settings but no third column Oracle Secure Backup.
    I logon to EM as SYS.
    Any ideas ?
    Thanks

    If you go to the maintenance tab on your EM, are there a couple of links under "Oracle Secure Backup" heading. I don't have this showing on my page. If I look at any of the Oracle demo pages I see it.
    Like I said it is a feature of 10gR2....which I have.

  • Checkpoints in Oracle Secure backup....

    hi!
    My question is that does Oracle Secure backup has "checkpoint " option...???.
    Basically when we are backing very large databases so any error could accoured so we should define "checkpoint" so in case of some network or any other error , we can restart that backup from last checkpoint.
    Please .....reply .....

    The following policies exists under operations
    obtool lsp operations .....
    fullbackupcheckpointfrequency 8 GB [default]
    incrbackupcheckpointfrequency 2 GB [default]
    I'm not clear if this is just for Filesystem backups though, or if it works for RMAN too.
    Rich

  • Oracle Secure Backup Installation

    Hi all,
    It is the first time I am installing and configuring an Oracle Secure Backup. I have installed Oracle Secure Backup 10.4.0.3 at the Administrative sever (windows 7x64) just to test it before I install it to the production server (windows server 2003). The problem is the following:
    After the installation I try to login to the webtool with the Admin user as described in the documentation. I enter the Admin password I set in the installation but it throws a login incorrect error. I know the password is the correct one as I have also tried to paste it from a notepad.
    What should I check?
    Thank you in advance.

    The username is admin with a lowercase a, see if that helps. Otherwise you should check the log files for the webserver to see where the problem might be.
    Are you putting your admin server on a Windows machine for a specific reason? It's fully supported but that won't give you the best performance, I'd suggest you run a Linux admin/meda server.
    Thanks
    Rich

  • Oracle Secure Backup with partitioned SL3000

    A Client has a partitioned SL3000 tape library with two Access Expansion Modules, T10000D drives, LTO6 drives and dual robotics.
    Three Partitions - one for SAMFS including one AEM - this partition works fine.
    Two partitions created for OSB - one for LTO6 and media and the other for T10000D and media due to mixed media not supported in OSB.
    OSB 12.1 has been implemented, device configuration has been completed and verified. Library inventory completes successfully, when a test backup is started no media mounts to the tape drives. MTX utility for Linux has been implemented for test purposes - successful mounts using MTX was performed - a library inventory was then done using OSB and completed successfully identifying the media mounted in the drive that was initiated by MTX, a successful unload was then done using OSB.
    We are unable to mount media using OSB.
    Here is a output of devdump from OSB:
    ob> dumpdev prd-mgmt2_tape_4
    Oracle Secure Backup hardware error log for "prd-mgmt2_tape_4", version 1
          STK T10000D, prom/firmware id 4.07, serial number 579004000975
    Tue Mar 31, 2015 at 12:05:31.057 (SAST)  devtype: 26
       obexec: prd-mgmt2:/dev/sg4, args to wst__exec: handle=0x0
          accessed via host prd-mgmt2: Linux 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 09:13:42 PST 2014
          op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
       cdb: 00 00 00 00 00 00 tur
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 00 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
          resid=0 (0x0), checks=0x0 []
    Tue Mar 31, 2015 at 12:05:38.142 (SAST)  devtype: 26
       obrobotd: /dev/sg4, args to wst__exec: handle=0x1
          accessed via host prd-mgmt2
          op=8 (rewind), buf=0x00, count=0 (0x0), parm=0x00
       cdb: 01 00 00 00 00 00 rewind
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 01 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
          resid=0 (0x0), checks=0x0 []
    Tue Mar 31, 2015 at 12:29:31.060 (SAST)  devtype: 26
       obexec: /dev/sg4, args to wst__exec: handle=0x0
          accessed via host prd-mgmt2
          op=0 (nop), buf=0x00, count=1 (0x1), parm=0x00
       cdb: 00 00 00 00 00 00 tur
       sense data:
          70 00 02 00 00 00 00 12 00 00 00 00 00 00 00 00
          00 00 00 00 00 00 40 01 00 00
             ec=0, sk=not ready, asc=0, ascq=0
             error is: unknown check condition
             flags: (none)
       returned status: code=unknown check condition,
            resid=0 (0x0), checks=0x0 []

    I have resolved the issue. Ill close this thread. :))

  • Installation of Oracle Secure Backup 10.3.0.3 on RedHat EL6.2 x8664

    Hi , My comany has got a new server to run RHEL6.2 x8664,
         and Oracle Secure Backup 10.3.0.3 should be hosted in that machine.
        when i begin installation , the installer quickly exit with errors:
    Welcome to Oracle's setup program for Oracle Secure Backup.  This
    program loads Oracle Secure Backup software from the CD-ROM to a
    filesystem directory of your choosing.
    This CD-ROM contains Oracle Secure Backup version 10.3.0.3.0_LINUX64.
    Please wait a moment while I learn about this host...mach_arch: Undefined variable.
    ERROR: can't determine sufficient info about this machine to continue.
    WHAT'S THE MATTER OF IT?

    OSB 10.3 is not supported on Oracle Linux 6. The steps you've listed in that post render your installation unsupported.
    You should install OSB 10.4.0.3.0 which is fully supported.
    Thanks
    Rich

  • Oracle Secure Backup error: 'No such file or directory'

    Hi,
    could you help me to fix the following issue?
    RMAN> run {   ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
    system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
    using target database control file instead of recovery catalog
    allocated channel: c1
    channel c1: SID=8 device type=SBT_TAPE
    channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
    channel c1: starting full datafile backup set
    channel c1: specifying datafile(s) in backup set
    input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
    input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
    input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
    input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
    input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
    SE\TBS_5.F
    channel c1: starting piece 1 at 26-OCT-09
    released channel: c1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
    ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
    652", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
    (Oracle Secure Backup error: 'No such file or directory').
    Thanks,
    jun

    You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
    If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
    The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
    I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
    If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
    It is hard to say what the "best" community is. There are many to choose from.

  • Oracle Secure Backup on Windows: file permission problem?

    Hi all.
    I did a new Oracle Secure Backup installation.
    I implemented a real simple domain:
    a Linux box is the media/administrative server. Then I have some Windows and Linux Client.
    On a Windows 2000 server SP4 box I'm experiencing an error.
    On certain directories i get the following:
    The directory is not a subdirectory of the root directory.
    On certain files I get the following instead:
    The directory name is invalid.
    The OSB service is running under the local system account on the client.
    Can you help me trouble this error?
    Thanks
    Giovanni

    Thanks for your reply.
    Disks are mounted using CIFS.
    we got the fix for this, need to do the following changes.
    # Turns off locking
    echo 0 > /proc/fs/cifs/OplockEnabled
    # Turns off inode caching
    echo 0 > /proc/fs/cifs/LookupCacheEnabled
    cheers...
    Edited by: TJ_DBA on 14/02/2011 16:43

  • Is Oracle Secure Backup tool popularly used today?

    Is Oracle Secure Backup tool popularly used today?
    Which tap management tool is the most popularly used third-party software with Oracle database?

    We use ARCServe for tape backups. Seems to function fine.

Maybe you are looking for