Oracle Service Bus and Enterprise Integration Pattern

Hey all,
Do you know where I can found the list of eip supported by OSB ?
Thanks,
Yves

Most of the stateless integration patterns can be implemented using OSB. Product is designed as stateless and I think it performs well if it is used for this purpose . So patterns like content based routing are very easily supported. You might need java code to make it support stateful patterns [ Example :Aggregator, Resequencer etc]. It could become quite messy and not recommended.

Similar Messages

Difference between Oracle service bus and SOA

Please Let me know what are the basis difference between Oracle Service Bus and SOA ?

A topic discussed many times here ..
OSB vs SOA suite

Oracle Service Bus and Financila Message Designer

Hi,
I am new to OSB and FMD so want some good working examples/samples which can explain how to call the FMD cartridge from OSB.

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Oracle service bus and database connectivity

Since currently OSB does not support Adapter Framework, what are currently options for using DB Adapter type functionality in Oracle Service Bus (ALSB).
It seems JMS and other transports are very well supported, but how do we use DB Services?
Please if someone can provide some insight into this.
thanks

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Oracle service bus and composing two web services

All,
Do let me know your thoughts on this.
Currently we have two web services
Web Service 1 - Verify Eligibility
Web Service 2 - Approve Proposal
Web Service 1 has one operation and accepts a well defined set of input parameters similarly web service 2 also exposes a single operation and accepts a set of input parameters.
These are deployed and running in our environment.
Now we have a requirement to stitch together these two web services and expose them as one single composite web service on the Oracle Service Bus 11g.
I want to create a proxy service on the OSB as unified web service (having its own WSDL) by composing the operations and input plus output parameters of the aforementioned two web services.
This way we can publish the WSDL to the front-end apps and they will trigger it with the required parameters and the proxy service will orchestrate the call to WS1 and WS2 and send the final output back to the calling client.
I was able to create an outbound call from the Proxy service to the underlying business services but I am not able to expose the Proxy service as web service with a WSDL i.e. create the proxy service by choosing operations of Web service 1 and web service 2
Please let me know your thoughts on this.
Regards,
Sushant

Thanks Atheek
The proxy service I tried to create orchestrate 2 web services.
But where we are struggling is How can i make this proxy service (composite) as a web service along with the WSDL.
The proxy service should be able to accept calls from the client with set of inputs representing both the underlying web services and coordinate calls b/w these two services and return consolidated output back to the calling client.
I am not finding a way to create a proxy service (web service along with the wsdl) which is representative of the underlying web services in a consolidated manner that can accepts inputs on behalf of both the underlying web services, orchestrate calls b/w the 2 web services and return the final output back to the calling client.
example modified to keep it brief
web service1
operation name: Verify Eligibility
Input: Complex type (String name, int Id, String address)
Output: Complex type(String approval status, int Id, String reason)
web service2
operation name: Approve Proposal
input: Complex type(String approval status, int Id, String reason, int Amount, int EmployeeCount)
Output: Complex type (String final status, String recommendation)
Composite Proxy Web Service
name: Composite Eligibility and Approval
Input: Complex type ( String name, int Id, String address, int Amount, int EmployeeCount)
Output: Complex type(String approval status, int Id, String reason,String final status, String recommendation)
The composite proxy should be created in a manner to jam the inputs of both the underlying web services and expose a representative interface on behalf of both the web services. This composite web service interface creation (WSDL) is where we are struggling a bit.
Because the calling clients need a unified WSDL to able to communicate with the composite web service.
Do post your thoughts.
Thanks Again,
Sushant

Enterprise Business Services and Oracle Service Bus

Hi,
We are using AIA and we have developed a number of EBS’. These are composite applications containing a mediator and are deployed to the SOA Server.
Am I right in saying that another option is to use the Oracle Service Bus and replace the composite application ESB’s with ESB’s in the Oracle Service Bus?
Robert

Gerhard,
I was thinking the benefits would be:
-     End point Virtualisation – Single end point for services we can configure.
-     Move the job of wiring the integrations from Development to Admin
-     Single point of monitoring for SLA’s and QOS
-     Improve visibility of ESB’s by providing a single list. (At the moment they are amongst many services in enterprise manager.)
At the moment we have 3 SOA servers connected to 6 systems. (Dev, Test and Prod) I was imagining it might be possible to have a single OSB with Service routing controlled by policies. This way we would not need three OSB setup’s.
I am also charged with planning for the development of further services and we already have a long list of composites in enterprise manager. I am imagining that this will quickly become unmanageable. With OSB we could hide the downstream services and only show the EBS’.
I also imagined that when we introduced a 11.1.1.6 SOA server we could simply adjust the routing rules at the OSB to set up a dev environment. Test out the new services work, then make similar adjustments on a per EBS basis until we have migrated completely to 11.1.1.6.
I agree that there are a lot of trade off’s and I do not really have the experience to weigh up the balance between the two. Yesterday I was asked to come up with methods of monitoring performance of the current integration as well as future integrations and the OSB data sheet talks a little bit about this which is why I am thinking more about it; Although have only got as far as looking at the OSB data sheet and some manuals.
I guess another option would be to go with some EBS’s as mediators and others on OSB but I think using a consistent method for EBS’s would be preferable.
Also there is the question do we have one OSB for all systems or separate OSB’s for Dev, Test and Prod.
Robert

Oracle Service Bus (OSB), Eclipse --- and statement of direction

Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
+...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
A) will it cease to exist and/or be terminated?
B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
C) will it continue to evolve side-by-side with JDev?
Thx,
-J.

I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James

Oracle service bus cache flush/clear - business service

Hi Everyone,
We are currently using oracle service bus as an integration platform. We are conducting a disaster recovery exercise for on of the applications (A) integrated to OSB, but the OSB is always connecting to the primary node of the application A though the DNS at application A is pointing to the secondary node.
We believe this is happening because OSB is caching the IP address of the application A (though it is using DNS) and keeps connecting to the same server even if the primary traffic is diverted to the secondary node.
Can someone please let us know if there is a way we can clear the cache of the business service (used to connect to the application A) without restarting the servers?
Thank you.
Regards,
Ram

Yes, by default the JVM will cache the name resolution. You can change this behaviour by adding the TTL in the managed server startup parameters as follows:
-Dnetworkaddress.cache.ttl=120 -Dnetworkaddress.cache.negative.ttl=10
The above parameters mean that the JVM will cache the name resolution for 2 minutes in case of success and for 10 seconds in case of a failure.
For testing purposes, you can reduce the ttl from 120 seconds, but when in production make sure that this value is not too low.
Regards,
Fabio Douek

Oracle service bus Business service - Cache Flush/clear

Hi Everyone,
We are currently using oracle service bus as an integration platform. We are conducting a disaster recovery exercise for on of the applications (A) integrated to OSB, but the OSB is always connecting to the primary node of the application A though the DNS at application A is pointing to the secondary node.
We believe this is happening because OSB is caching the IP address of the application A (though it is using DNS) and keeps connecting to the same server even if the primary traffic is diverted to the secondary node.
Can someone please let us know if there is a way we can clear the cache of the business service (used to connect to the application A) without restarting the servers?
Thank you.
Regards,
Ram

Yes, by default the JVM will cache the name resolution. You can change this behaviour by adding the TTL in the managed server startup parameters as follows:
-Dnetworkaddress.cache.ttl=120 -Dnetworkaddress.cache.negative.ttl=10
The above parameters mean that the JVM will cache the name resolution for 2 minutes in case of success and for 10 seconds in case of a failure.
For testing purposes, you can reduce the ttl from 120 seconds, but when in production make sure that this value is not too low.
If you follow the above, you don't have to restart anything and you don't have to write any script. The IP address is going to be updated as long as the DNS server is being updated correctly (you can easily test by pinging the host name)
Regards,
Fabio Douek

Oracle Service Bus 11gR3(11.1.1.3.0) Clustering Configuration Error.

Hi ,
I am trying to configure a domain with a AdminServer and 2 Managed servers hosting Oracle Service Bus.
I created a admin server and it started up fine. Then i extended the domain and checked on Oracle Service Bus and tried to create two managed servers and assigned it to a cluster.
Though when i created a managed server assigned to a cluster it was all working fine. I would like to create another managed server and assign it to the cluster.
Any help with this problem would be very helpful.
As soon as I assign two servers to the cluster I get an exception and the Configuration Wizard throws exception.
Jan 23, 2011 2:54:30 PM [THREAD: WizardController] com.oracle.cie.domain.script.jython.CommandExceptionHandler handleException
SEVERE: Error: assign() failed.
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Unable to find JMSQueue wli.reporting.purge.queue
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.assign(WLScriptContext.java:956)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx0.assign$10(<iostream>:61)
at org.python.pycode._pyx0.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx3.f$0(<iostream>:95)
at org.python.pycode._pyx3.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.jython.WLSTOfflineInterpreterHelper.executeScript(WLSTOfflineInterpreterHelper.java:138)
at com.oracle.cie.domain.WLSAutoDeployer.executeEmbeddedScript(WLSAutoDeployer.java:5286)
at com.oracle.cie.domain.WLSAutoDeployer.executeAllEmbeddedScripts(WLSAutoDeployer.java:5168)
at com.oracle.cie.domain.WLSAutoDeployer.executeEmbeddedScriptsByState(WLSAutoDeployer.java:5227)
at com.oracle.cie.domain.WLSAutoDeployer.executeAllEmbeddedScriptsByState(WLSAutoDeployer.java:1449)
at com.oracle.cie.domain.WLSAutoDeployer.executeScripts(WLSAutoDeployer.java:330)
at com.oracle.cie.domain.assignment.ServerClusterAssignment.acceptChanges(ServerClusterAssignment.java:62)
at com.oracle.cie.domain.assignment.AssignmentTree.acceptChanges(AssignmentTree.java:465)
at com.oracle.cie.domain.operation.AssignmentOperation.acceptChanges(AssignmentOperation.java:104)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.saveChanges(AssignmentGUITask.java:256)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.onLeave(AssignmentGUITask.java:280)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.okNext(AssignmentGUITask.java:142)
at com.oracle.cie.wizard.WizardController.nextTask(WizardController.java:592)
at com.oracle.cie.wizard.WizardController.run(WizardController.java:469)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.oracle.cie.domain.script.ScriptException: Unable to find JMSQueue wli.reporting.purge.queue
at com.oracle.cie.domain.script.ScriptExecutor.pinJMSDestForEmbeddedScript(ScriptExecutor.java:3343)
at com.oracle.cie.domain.script.ScriptExecutor.processAssignmentByName(ScriptExecutor.java:1463)
at com.oracle.cie.domain.script.jython.WLScriptContext.assign(WLScriptContext.java:952)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx0.assign$10(<iostream>:61)
at org.python.pycode._pyx0.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx3.f$0(<iostream>:99)
at org.python.pycode._pyx3.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.jython.WLSTOfflineInterpreterHelper.executeScript(WLSTOfflineInterpreterHelper.java:139)
at com.oracle.cie.domain.WLSAutoDeployer.executeEmbeddedScript(WLSAutoDeployer.java:5286)
at com.oracle.cie.domain.WLSAutoDeployer.executeAllEmbeddedScripts(WLSAutoDeployer.java:5168)
at com.oracle.cie.domain.WLSAutoDeployer.executeEmbeddedScriptsByState(WLSAutoDeployer.java:5227)
at com.oracle.cie.domain.WLSAutoDeployer.executeAllEmbeddedScriptsByState(WLSAutoDeployer.java:1450)
at com.oracle.cie.domain.WLSAutoDeployer.executeScripts(WLSAutoDeployer.java:330)
at com.oracle.cie.domain.assignment.ServerClusterAssignment.acceptChanges(ServerClusterAssignment.java:62)
at com.oracle.cie.domain.assignment.AssignmentTree.acceptChanges(AssignmentTree.java:466)
at com.oracle.cie.domain.operation.AssignmentOperation.acceptChanges(AssignmentOperation.java:104)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.saveChanges(AssignmentGUITask.java:256)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.onLeave(AssignmentGUITask.java:280)
at com.oracle.cie.wizard.domain.gui.tasks.AssignmentGUITask.okNext(AssignmentGUITask.java:143)
Thanks
Edited by: karpra on Jan 23, 2011 3:19 PM

Anuj,
Thanks for your reply.
May be i was not too clear in my previous post.
I do not see this problem when i start the managed servers.
I stumble across this problem when i try to configure a cluster containing two managed servers in the configuration wizard. Earlier i had run the rcu utility while installing OSB on top of weblogic server.
So when i try to create a domain with osb it checks for DEV_SOAINFRA and i change the default derby connection to oracle(my database) and then to test i tried creating a cluster with one managed server it seemed to be working fine.
Now i tried creating two managed servers in a cluster in configuration wizard as soon as i try to assign one managed server to cluster its fine , once i assign the second managed server it fails with that exception and the configuration wizard displays error occured and it terminates.
The exact problem is as soon as i assign two managed servers to a cluster it fails(configuration wizard)
I would guess its a problem creating a distributed jsm system with queue and topics that osb uses.
Note : - It would be helpful as well if i can somehow create a distributed jms system used by osb for other managed server (using WLST), and then i can create a new managed server in the Admin console and assign it to the cluster as well.
Edited by: 698740 on Jan 24, 2011 4:42 AM

Oracle Service Bus: Monitoring/Tracking Consumer Services?

Hi,
since we have a Oracle Service Bus and a Oracle Service Registry, is there any standard solution for tracking which consumer services/applications are accessing which provider services? What we need is monitoring the applications (consumer) which are accessing an specific service (provider) registered in the OSB. Is it possible to have this information as monitoring/statistical data in the Oracle Service Bus console? if not, any suggestion to implement such behaviour ?
Thank you in advance,
Antonio.

I would like to have (don't know where) a list with all my consumer services (outside OSB) and so map them with the accessed proxy services (providers on OSB). The aim for this functionality is being able to monitor which consumer services from outside the OSB (then I need a place where these services can be identified and listed) are accessing specific proxy services published as providers on the OSB. Is like "well, I have my proxies published on the OSB, but I need to know WHO (consumers outside the OSB) is accessing to them?". I don't know if such functionality is provided by the Oracle Service Registry or the Service Bus, or it's just a custom implementation without any Oracle product.
Thank you for your help Manoj!
Antonio.

What are the differences between Oracle Service Bus 10g and WLI 10g?

Hi,
To me both Oracle Service Bus 10g R3 and Weblogic Integration 10g seem to offer the same functionalities for implementing an enterprise middleware.
I would be grateful if someone could:
1. provide me with the two products' differences.
2. describe what their roadmap is?
3. what are their positioning in the Oracle product catalog? Are they both members of Oracle SOA Suite? Fussion Middleware?
Thanks a lot,
Best regards,
Babis.

Thanks everyone for taking the time to reply,
Eduardo: the answer to your questions are that all the flows will be short-lived but if we can make long-lived flows then we might consider developing them. We would need to persist the state of the flow somehow.
I understand that some of our requirements would be better accomodated by WLI or bpel but we don't have an option but only to use OSB.
So, do you think we could overcome the stateless nature of OSB by:
1. writing to appropriate tables and reading from there and calling plsql procedures from the flows
2. using JMS queues.
In detalis:
1. Regarding the writing/reading from Databases (in our case it would be oracle 10g R2 - probably RAC), is there something like a Database control in WLI, which we could use in OSB? What i have seen are using xquery execute-sql function or a JCA DB adapter but both of them seem to me not very easy to use. Is there another option?
2. Regarding the JMS, in case that i want:
a service that writes to a JMS queue what are the servicetype and transport that i should use?
a service that reads from a JMS queues what are the service type and transport that we should used?
Any information that you may share with me in the design and implementation of the above would be great.
Thanks a lot.

What are all difference between 11g Mediator and 10g Oracle service bus.

hi all ,
Apart from SCA concept , storing location
is thr any other difference between 11g Mediator and 10g Oracle service bus ?
thx in advance..

11g introduces the SCA architecture for building the service infrastructure.
SOA 11g uses:-
1. Uses the weblogic Server and BEA Aqualogic Service Bus (ALSB) for the Oracle Service Bus.
2. BPEL uses scalable DOM with reduced memory usage.
3. New adapters and leverage for Java 2 Connector Architecture (J2CA)
4. BAM finally ported from .Net to J2EE and is part of the service infrastructure
5. Oracle Web Services Management built into SOA 11g service infrastructure
6. New adapters and leverage for Java 2 Connector Architecture (J2CA). Tighter integration with E-Business Suite & large payload support.
7. Business Rules in SOA 10g business rules are managed using the Rules Author & in SOA 11g business rules are managed using JDeveloper and SOA composer

Oracle Service Bus IDE plugin and OEPE

Hello,
Due to some trouble I got with Oracle Workshop 10gR3 with JEE5 development, I switch to Oracle Enterprise Pack for Eclipse (OEPE) 11g.
As I have to use oracle Service Bus 10gR3, I would like to benefit from the Oracle Service Bus plugin bundled with Oracle Workshop.
I would to avoid switch between two Eclipse's instances (Europa and Ganymede).
Is it possible to deploy Oracle Service Bus Eclipse's plugin on OEPE 11g?
Thanks

May I did not well expressed my question.
I did not tried to deploy Oracle Service Bud IDE plugins on OEPE 11g.
I can figure out that this will not work properly.
If I understand, the plan for the future is to adopt OEPE 11g even for Oracle Service Bud IDE.
Is there any date for this?
Thanks

Application Integration Architecture Foundation Pack on Oracle Service Bus

The paper on the Oracle web site from December 2008 titled "Application Integration Architecture Foundation Pack on Oracle Service Bus" is an interesting read. The technology roadmap makes it clear the OSB is the future and current "old" ESB supported by AIA is going on the scrap heap. Now I know the OSB is not a supported platform for even the latest foundation pack so I wonder about why this paper was published. Is Oracle indicating foundation pack v 2.2.x support on OSB? Is it published as a "this is something to look forward to" type document? I honestly wonder since there are some pretty specific instructions on how to get it working and the authors are senior thought leaders for the AIA product.
RICH
2/04/08 Update - I see that with the AIA 2.3 release that Oracle Service Bus did not make the list of supported technology.
Edited by: Rich Naszcyniec on Feb 4, 2009 12:38 PM

Check out this link :
http://steffensinsights.blogspot.com/2012/03/osb-access-to-salesforcecom-part-1.html
in detail info on how you can connect to salesforce alongwith the code sample

Oracle Service Bus and Enterprise Integration Pattern

Similar Messages

Maybe you are looking for