Oracle Service Bus- Monitoring

Hi,
Is there a way to extract monitoring statistics like: Pipeline matrix, action matrix using jmx monitoring API?
Thanks.

this same question has been asked recently in another thread (can't find it now)
essentially you have this API exposed as a JMX transport, but without a corresponding MBean:
http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/app_jmx_monitoring.htm
I think it would not be very difficult to expose it through a MBean and register the MBean into the WebLogic MBeanServer.
As soon as I find 1 hour I will do it and (hopefully) let you know (I always say so and never do it :o( )

Similar Messages

Oracle Service Bus: Monitoring/Tracking Consumer Services?

Hi,
since we have a Oracle Service Bus and a Oracle Service Registry, is there any standard solution for tracking which consumer services/applications are accessing which provider services? What we need is monitoring the applications (consumer) which are accessing an specific service (provider) registered in the OSB. Is it possible to have this information as monitoring/statistical data in the Oracle Service Bus console? if not, any suggestion to implement such behaviour ?
Thank you in advance,
Antonio.

I would like to have (don't know where) a list with all my consumer services (outside OSB) and so map them with the accessed proxy services (providers on OSB). The aim for this functionality is being able to monitor which consumer services from outside the OSB (then I need a place where these services can be identified and listed) are accessing specific proxy services published as providers on the OSB. Is like "well, I have my proxies published on the OSB, but I need to know WHO (consumers outside the OSB) is accessing to them?". I don't know if such functionality is provided by the Oracle Service Registry or the Service Bus, or it's just a custom implementation without any Oracle product.
Thank you for your help Manoj!
Antonio.

Error using the test console of the Oracle Service Bus 11gR1

Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
Every time I try to execute a business service or a proxy service I end up getting the following message.
Error Accessing Test Configuration
*"Test Console" service is not running. Contact administrator to start this service.*
In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
Is anyone else facing this too ??
Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
*[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
Attached the whole log at the end below.
To provide an update on my trouble shooting
1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
Result: Still the same error message.
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
I am also attaching the file contents here
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
<java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
<java:alsb-credential-debug>false</java:alsb-credential-debug>
<java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
<java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
<java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
<java:alsb-management-debug>false</java:alsb-management-debug>
<java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
<java:alsb-module-debug>false</java:alsb-module-debug>
<java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
<java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
<java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
<java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
<java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
<java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
<java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
<java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
<java:alsb-test-console-debug>true</java:alsb-test-console-debug>
<java:alsb-transports-debug>false</java:alsb-transports-debug>
<java:alsb-uddi-debug>false</java:alsb-uddi-debug>
<java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
<java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
<java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
<java:alsb-security-module-debug>false</java:alsb-security-module-debug>
<java:alsb-sources-debug>false</java:alsb-sources-debug>
<java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
<java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
<java:alsb-throttling-debug>false</java:alsb-throttling-debug>
<java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
<java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
<java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
<java:alsb-debugger-debug>false</java:alsb-debugger-debug>
<java:alsb-console-debug>false</java:alsb-console-debug>
<java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
<java:alsb-bpel-debug>false</java:alsb-bpel-debug>
<java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
<30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
<30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
This is really putting me off and its really disappointing to see all these issues in this new release.
How can oracle let a release slip in with such a Major Issue.
Please can any one help or provide a work around atleast.
Regards
Nitin

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

Enterprise Business Services and Oracle Service Bus

Hi,
We are using AIA and we have developed a number of EBS’. These are composite applications containing a mediator and are deployed to the SOA Server.
Am I right in saying that another option is to use the Oracle Service Bus and replace the composite application ESB’s with ESB’s in the Oracle Service Bus?
Robert

Gerhard,
I was thinking the benefits would be:
-     End point Virtualisation – Single end point for services we can configure.
-     Move the job of wiring the integrations from Development to Admin
-     Single point of monitoring for SLA’s and QOS
-     Improve visibility of ESB’s by providing a single list. (At the moment they are amongst many services in enterprise manager.)
At the moment we have 3 SOA servers connected to 6 systems. (Dev, Test and Prod) I was imagining it might be possible to have a single OSB with Service routing controlled by policies. This way we would not need three OSB setup’s.
I am also charged with planning for the development of further services and we already have a long list of composites in enterprise manager. I am imagining that this will quickly become unmanageable. With OSB we could hide the downstream services and only show the EBS’.
I also imagined that when we introduced a 11.1.1.6 SOA server we could simply adjust the routing rules at the OSB to set up a dev environment. Test out the new services work, then make similar adjustments on a per EBS basis until we have migrated completely to 11.1.1.6.
I agree that there are a lot of trade off’s and I do not really have the experience to weigh up the balance between the two. Yesterday I was asked to come up with methods of monitoring performance of the current integration as well as future integrations and the OSB data sheet talks a little bit about this which is why I am thinking more about it; Although have only got as far as looking at the OSB data sheet and some manuals.
I guess another option would be to go with some EBS’s as mediators and others on OSB but I think using a consistent method for EBS’s would be preferable.
Also there is the question do we have one OSB for all systems or separate OSB’s for Dev, Test and Prod.
Robert

Oracle Service Bus (OSB), Eclipse --- and statement of direction

Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
+...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
A) will it cease to exist and/or be terminated?
B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
C) will it continue to evolve side-by-side with JDev?
Thx,
-J.

I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
Design-Time Environment
JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
environment moving forward.
The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
console).
cheers
James

Oracle Service Bus and Financila Message Designer

Hi,
I am new to OSB and FMD so want some good working examples/samples which can explain how to call the FMD cartridge from OSB.

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Oracle service bus and database connectivity

Since currently OSB does not support Adapter Framework, what are currently options for using DB Adapter type functionality in Oracle Service Bus (ALSB).
It seems JMS and other transports are very well supported, but how do we use DB Services?
Please if someone can provide some insight into this.
thanks

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

[OSB] Oracle Service Bus: select database DBadapter runtime

Suppose you have 2 databases DB1 and DB2 and both have the SCOTT scheme with the EMP table. The default way to gain access to the databases in the Oracle Service Bus (OSB) is by defining 2 database adapters and defining a business service on each adapter:
- BS1 DBadapter1 DB1.SCOTT.EMP
- BS2 DBadapter2 DB2.SCOTT.EMP
With this setup you can define a proxy service and let the message flow decide which adapter to call.
Now change this configuration a little and suppose you have 25 databases, you can define 25 database adapters and 25 business services, but that involves a lot of repeating work of defining adapters and business services. A more elegant configuration is one business service with one database adapter, and the database connection is set runtime in stead of design time.
PS BS DBadapter DB1.SCOTT.EMP ... DB25.SCOTT.EMP
The challenge is: how do you configure the database adapter runtime (called by an OSB business service).
With kind regards,
Jornica

Oracle Service Bus 10gR3 contains the JCA framework which will eventually allow us to exploit the whole set of JCA adapters currently in use in BPEL Process Manager. Over the next few months several JCA adapters will be certified to be used with Oracle Service Bus - the Database adapter is one of the first of these.
As for SOA Suite and WebLogic bundling, let me explain. SOA Suite contains the following products:
BPEL Process Manager
Business Activity Monitoring
Business Rules
Web Services Manager
Complex Event Processing
B2B
ESB (the old Oracle ESB product)
Service Bus (formerly AquaLogic Service Bus from BEA)
This does not come with an application server as the suite is hot-pluggable (i.e. can be used with a number of application servers). However, the preferred (and cheaper) approach is to purchase SOA Suite and WebLogic Suite (which contains iAS, WebLogic Enterprise Edition, Coherence, JRockit with 100ms deterministic garbage collection and WebLogic Operations Control). This is because some of the elements of the SOA Suite only currently run on iAS (B2B) and some only run on WebLogic Server (Oracle Service Bus) although in the future these will also become hot pluggable.
To find out more, check out the SOA Suite and WebLogic Suite pages below:
[SOA Suite|http://www.oracle.com/technologies/soa/soa-suite.html]
[WebLogic Suite|http://www.oracle.com/appserver/weblogic/weblogic-suite.html]
You will find the DataSheets are particularly useful for giving you an overview of the suite.
Hope that helps.
Chris

Where download Oracle Service Bus 10gR3?

could someone tell me please where I can download Oracle Service Bus 10gR3? the file name should be osb103_wls103_win32.exe
I just installed:
SOA Suite 10.1.3.1
SOA Suite Patch to take SOA Suite to 10.1.3.5 revision level
Business Activity Monitoring 10.1.3.3
SOA Suite Patch to take BAM to 10.1.3.5 revision level
Oracle JDeveloper 10.1.3.4
missing only Oracle Service Bus 10gR3 for complete my environment
Thanks

the file name should be osb103_wls103_win32.exeWhy do you want to use older version of OSB in 10g series (latest version in 10g series is 10.3.1)? Any special requirement?
You may get the installer of older versions from oracle support (http://metalink.oracle.com/) or from http://edelivery.oracle.com/
Regards,
Anuj

How to log the exception using Log action in Oracle Service Bus

Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.

It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.

Oracle OSB 11G. Unable to find Oracle Service Bus Configuration Page.

Hi All,
Sorry for the apparent silly question but I am studying and learning the product.
I have the OSB 11G installed and running with a proxy service working and routing requests. The Oracle ESB documentation http://download.oracle.com/docs/cd/E21764_01/doc.1111/e15866/ui_ref.htm#i1327746 at chapter 4.4.2 New Oracle Service Bus Configuration Project Wizard
Use this wizard to create an Oracle Service Bus configuration project. For configuration options, see Section 4.4.3, "Oracle Service Bus Configuration Page."
4.4.3 Oracle Service Bus Configuration Page.
I don't see the configuration page in anywhere in the left pane of the console. Am I missing something? The project creation works fine but I just don't see the configuration Wizard.
Thanks.
Regards
Salvatore Ilardo

The link which you are referring is for user interface objects in the Oracle Service Bus plug-ins and OSB plug-ins are used with OEPE (Oracle Enterprise Pack for Ecplise) for OSB development. OEPE is the only supported IDE for OSB development as of now.
Remember, at a time, one and only one Oracle Service Bus Configuration project can be deployed in a OSB domain which may contain desired number of Oracle Service Bus Projects and that's why there is no provision of creating Oracle Service Bus Configuration Project in sbconsole GUI. In IDE, you may create many Oracle Service Bus Configuration Project and that's why it has a Oracle Service Bus Configuration Project Wizard.
Regards,
Anuj

Need to Import an application built using Oracle Service Bus on Oracle Public Cloud

I have built an application using Oracle Service Bus (OSB) eclipsed IDE which transfers file from server1 to server2, reads the transferred file, transforms it into a payload and calls a webservice. I have tested this application locally by installing Oracle Service Bus on one on my servers.
I have java as a service account on Oracle Public Cloud. I would like to import the above application onto Oracle Public Cloud. I am not sure if the Weblogic domain on Oracle Public Cloud has enabled OSB or not.
Let me know if someone can help me.

Hello,
Oracle Service Bus is currently not supported in Oracle Java Cloud Service.
Oracle Java Cloud Service supports deployment of JavaEE and ADF applications.
-- Nilesh

Calling Oracle BPM Process Web Service from Oracle Service Bus

Hi
I am using Oracle Service Bus 10gR3.
I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
1. Create a Process.
2. Expose the Process as a Web Service.
3. Run the project. This starts the Process Execution Engine.
4. Create an ALSB External Resource of type Management Host.
5. Create a second ALSB External Resource for registration.
6. Register the End Point
Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
Finally when I try to test the Proxy Service by launching test console, I get the
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>INTERNAL SERVER ERROR</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
Please help me . Thanks In advance.
Thanks
Nilay
Edited by: user8950019 on Feb 1, 2010 4:11 AM

Hi,
When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
Request is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:startSession>
<password>Employee</password>
<user>Employee</user>
</exp:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response i Get is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<return>3782hecq1s85h</return>
</ns1:startSessionResponse>
</soapenv:Body>
</soapenv:Envelope
but when i put this sessionId in main request:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:expenseReport>
<sessionId>3782hecq1s85h</sessionId>
<reportArg>

<comments>yes</comments>

<costCenter>jaa</costCenter>

<description>aa</description>

<isApproved>y</isApproved>

<items>

<elements>

<amount>700</amount>

<date>?</date>

<description>?</description>

<receiptChecked>?</receiptChecked>
</elements>
</items>

<reviewedBy>?</reviewedBy>

<submitDate>?</submitDate>

<submittedBy>?</submittedBy>

<total>?</total>
</reportArg>
</exp:expenseReport>
</soapenv:Body>
</soapenv:Envelope>
Response coming is :-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     ... 21 more
Caused by: java.lang.NumberFormatException: For input string: "jaa"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
     at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
     at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
     at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
     ... 28 more</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
can anyone explain why this error is coming.?
Edited by: user8937128 on May 19, 2010 6:58 AM

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

ClassNotFoundException with Custom OWSM Policy in Oracle Service Bus

Hi All,
I have a situation where I have created a custom web service manager policy. When I attach this policy to an Oracle Service Bus Proxy Service and invoke the service I get a ClassNotFoundError
Caused By: java.lang.ClassNotFoundException: au.com.MyClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at oracle.wsm.policy.util.Loader.loadClass(Loader.java:369)
at oracle.wsm.policy.util.Loader.loadClass(Loader.java:389)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:238)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:279)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.init(WSPolicyRuntimeExecutor.java:162)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.getPolicyExecutor(PolicyExecutionEngine.java:137)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.execute(PolicyExecutionEngine.java:101)
at oracle.wsm.agent.WSMAgent.processCommon(WSMAgent.java:937)
at oracle.wsm.agent.WSMAgent.processRequest(WSMAgent.java:454)
at oracle.wsm.agent.handler.WSMEngineInvoker.handleRequest(WSMEngineInvoker.java:366)
at com.bea.wli.sb.security.wss.wsm.WsmInboundHandler.processRequest(WsmInboundHandler.java:150)
at com.bea.wli.sb.security.wss.WssHandlerImpl.doInboundRequest(WssHandlerImpl.java:223)
at com.bea.wli.sb.context.BindingLayerImpl.addRequest(BindingLayerImpl.java:289)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:87)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
The jar file is in the user_projects/domains/mydomain/lib directory.
Attaching the policy to BPEL services has no issue and the policy is invoked successfully.
I am unable to determine why the OSB would behave differently in this regard, or what I need to configure differently in order to have it found by the class loaders for the OSB.
Any help or suggestions appreciated.
I am using 11.1.1.4.0
The jar file has the necessary policy_config.xml file and the META-INF/mylabel/mypolicy.xml files in situ. As I said, it is working in the soa_server but not the OSB.

Have you restarted servers after putting jar in $Domain_Home/lib directory? Also try after explicitly adding this jar in classpath by editing server startup script (startManagedWeblogic.cmd or .sh) or in domain env setting script (setDonainEnv.cmd or .sh) and restarting the servers.
Regards,
Anuj
Edited by: Anuj Dwivedi on Mar 21, 2011 1:10 PM

Oracle Service Bus- Monitoring

Similar Messages

Maybe you are looking for