Oracle Service Bus Proxy Testing with Attached Policy

Hello,
When I'm testing a Proxy through the test console (lauch by clicking the bug) I'm seeing Override Values in the Security section. I've created four custom policies and attached two of them to the proxy. One that processes the request and the other the processes the response. The other two policies are attached to a composite on an interface to an external service. Those policies process the request/response respectively. When I bring up the test console for the OSB Proxy, I'm seeing the two policies that are attached to the composite in the "Security" section as "Override Values". If I don't delete the policies, they are executed. Which causes an error. So I have to delete them to get a clean run. I'm not sure why they are showing up in the "Override Values". It's definitely annoying that I have to delete them each time before executing the test. Any ideas on what's going on?
Thanks!
Steve
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 ]

Hi Wai,
I think it is not supported with OSB. The doc says -
46.15 Is single sign-on supported in Oracle Service Bus?
Strictly speaking single sign-on (SSO) is not applicable to Oracle Service Bus messaging scenarios for several reasons. First, Oracle Service Bus is stateless; there is no notion of a session or conversation among multiple parties. Second, Oracle Service Bus clients are typically other enterprise software applications, not users behind a Web browser. Therefore, it is acceptable to require that these clients send credentials such as username and password on every request, provided that the communication is secured by means such as SSL or WS-Security. However, SSO between the Oracle Service Bus Console and the Oracle WebLogic Server Administration Console is supported. For more information, see "Single Sign-On" in "Security Fundamentals" in Oracle Fusion Middleware Understanding Security for Oracle WebLogic Server.http://download.oracle.com/docs/html/E15866_01/security_faq.htm#i1058723
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/security_faq.html#wp1053670
Regards,
Anuj

Similar Messages

Oracle Service Bus - Assign Variables with max occurs of unbounded

Hello,
I have the following response document from a call to a Tuxedo Service. I need to assigned the values for all <SOC> tags below to the response document which was created with a min occurs of 1 and max occurs of unbounded. When I try to assign the values from all <SOC> tags from the response document below, only the first value of SOC get assigned. When I run a test in the XQuery Expression Editor, I get back all 7 values for SOC below using the following expression: $outputCsLsSrvAgr00/SOC. However, the variable this data gets assigned to only has the first SOC node.
<FML32>
<SERVICE_TYPE>R</SERVICE_TYPE>
<SERVICE_TYPE> </SERVICE_TYPE>
<SERVICE_TYPE> </SERVICE_TYPE>
<SERVICE_TYPE>P</SERVICE_TYPE>
<SOC_EFFECTIVE_DATE>20080924</SOC_EFFECTIVE_DATE>
<SERVICE_TYPE>R</SERVICE_TYPE>
<SOC_EFFECTIVE_DATE>20080802</SOC_EFFECTIVE_DATE>
<SERVICE_TYPE>R</SERVICE_TYPE>
<SOC>DTMMSBUIN</SOC>
<SOC>FN0132007</SOC>
<SOC>DTUNLB004</SOC>
<SOC_EFFECTIVE_DATE>20080922</SOC_EFFECTIVE_DATE>
<SOC_EFFECTIVE_DATE>20080924</SOC_EFFECTIVE_DATE>
<SOC_EFFECTIVE_DATE>20080608</SOC_EFFECTIVE_DATE>
<SOC_EFFECTIVE_DATE>20080924</SOC_EFFECTIVE_DATE>
<SOC_EFFECTIVE_DATE>20080923</SOC_EFFECTIVE_DATE>
<SERVICE_TYPE>R</SERVICE_TYPE>
<SOC>VMA0.00</SOC>
<SOC>OUTRSTRCN</SOC>
<SOC>SMSBAN202</SOC>
<SOC>VM</SOC>
</FML32>
Can someone tell me how to populate the response variable structures with all 7 values of SOC?
Thanks,
David Walaski

can you post your schema, this XML looks strange, there seems to be no order or logic to the way it is being represented.
This could be causing you the issues. The test function in workshop can behave differently to when run at runtime.
cheers
James

ClassNotFoundException with Custom OWSM Policy in Oracle Service Bus

Hi All,
I have a situation where I have created a custom web service manager policy. When I attach this policy to an Oracle Service Bus Proxy Service and invoke the service I get a ClassNotFoundError
Caused By: java.lang.ClassNotFoundException: au.com.MyClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at oracle.wsm.policy.util.Loader.loadClass(Loader.java:369)
at oracle.wsm.policy.util.Loader.loadClass(Loader.java:389)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:238)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:279)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.init(WSPolicyRuntimeExecutor.java:162)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.getPolicyExecutor(PolicyExecutionEngine.java:137)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.execute(PolicyExecutionEngine.java:101)
at oracle.wsm.agent.WSMAgent.processCommon(WSMAgent.java:937)
at oracle.wsm.agent.WSMAgent.processRequest(WSMAgent.java:454)
at oracle.wsm.agent.handler.WSMEngineInvoker.handleRequest(WSMEngineInvoker.java:366)
at com.bea.wli.sb.security.wss.wsm.WsmInboundHandler.processRequest(WsmInboundHandler.java:150)
at com.bea.wli.sb.security.wss.WssHandlerImpl.doInboundRequest(WssHandlerImpl.java:223)
at com.bea.wli.sb.context.BindingLayerImpl.addRequest(BindingLayerImpl.java:289)
at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:87)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
The jar file is in the user_projects/domains/mydomain/lib directory.
Attaching the policy to BPEL services has no issue and the policy is invoked successfully.
I am unable to determine why the OSB would behave differently in this regard, or what I need to configure differently in order to have it found by the class loaders for the OSB.
Any help or suggestions appreciated.
I am using 11.1.1.4.0
The jar file has the necessary policy_config.xml file and the META-INF/mylabel/mypolicy.xml files in situ. As I said, it is working in the soa_server but not the OSB.

Have you restarted servers after putting jar in $Domain_Home/lib directory? Also try after explicitly adding this jar in classpath by editing server startup script (startManagedWeblogic.cmd or .sh) or in domain env setting script (setDonainEnv.cmd or .sh) and restarting the servers.
Regards,
Anuj
Edited by: Anuj Dwivedi on Mar 21, 2011 1:10 PM

Error using the test console of the Oracle Service Bus 11gR1

Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
Every time I try to execute a business service or a proxy service I end up getting the following message.
Error Accessing Test Configuration
*"Test Console" service is not running. Contact administrator to start this service.*
In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
Is anyone else facing this too ??
Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
*[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
Attached the whole log at the end below.
To provide an update on my trouble shooting
1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
Result: Still the same error message.
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
I am also attaching the file contents here
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
<java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
<java:alsb-credential-debug>false</java:alsb-credential-debug>
<java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
<java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
<java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
<java:alsb-management-debug>false</java:alsb-management-debug>
<java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
<java:alsb-module-debug>false</java:alsb-module-debug>
<java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
<java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
<java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
<java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
<java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
<java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
<java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
<java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
<java:alsb-test-console-debug>true</java:alsb-test-console-debug>
<java:alsb-transports-debug>false</java:alsb-transports-debug>
<java:alsb-uddi-debug>false</java:alsb-uddi-debug>
<java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
<java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
<java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
<java:alsb-security-module-debug>false</java:alsb-security-module-debug>
<java:alsb-sources-debug>false</java:alsb-sources-debug>
<java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
<java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
<java:alsb-throttling-debug>false</java:alsb-throttling-debug>
<java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
<java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
<java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
<java:alsb-debugger-debug>false</java:alsb-debugger-debug>
<java:alsb-console-debug>false</java:alsb-console-debug>
<java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
<java:alsb-bpel-debug>false</java:alsb-bpel-debug>
<java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
<30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
<30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
This is really putting me off and its really disappointing to see all these issues in this new release.
How can oracle let a release slip in with such a Major Issue.
Please can any one help or provide a work around atleast.
Regards
Nitin

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

Oracle Service Bus 10.3.1 proxy consuming jms (AQJMS)

Hi,
I need to use AQJMS with Oracle Service Bus proxy.
We have an installation with WLS 10.3 and OSB 10.3.1 and another with WLS 10.3.1 where I defined a JMS Foreign Server like appears in the documentation http://download.oracle.com/docs/cd/E12839_01/web.1111/e13738/aq_jms.htm#JMSAD565.
I need support to how to define the URI at the OSB configuration.. jms://server:port/XAQueueConnectionFactory/QueueName... because I tried a lot of ways and can't make it work.
Thank You in Advance...
Juan Pablo

Hi,
Because I want to use the jms protocol... because if I change AQJMS with another JMS Provider the only thing that I must change in OSB is jms://server:port/CF/Q
In SOA Suite 10.1.3.x I use JMS Adapter for this...
Thank You.
JP

Oracle Service Bus IDE plugin and OEPE

Hello,
Due to some trouble I got with Oracle Workshop 10gR3 with JEE5 development, I switch to Oracle Enterprise Pack for Eclipse (OEPE) 11g.
As I have to use oracle Service Bus 10gR3, I would like to benefit from the Oracle Service Bus plugin bundled with Oracle Workshop.
I would to avoid switch between two Eclipse's instances (Europa and Ganymede).
Is it possible to deploy Oracle Service Bus Eclipse's plugin on OEPE 11g?
Thanks

May I did not well expressed my question.
I did not tried to deploy Oracle Service Bud IDE plugins on OEPE 11g.
I can figure out that this will not work properly.
If I understand, the plan for the future is to adopt OEPE 11g even for Oracle Service Bud IDE.
Is there any date for this?
Thanks

Documentation and Examples of Oracle Service Bus

Good afternoon!
My name is Bruno Lira and I work with Peoplesoft HCM.
Today the project on which I need to use the Oracle Service Bus to integrate with other PeopleSoft systems. By chance, someone here would have some documentation and examples of OSB?
Thank you.

an excellent book
http://www.oracle.com/technetwork/articles/soa/schmutz-osb-cookbook-1543518.html
list of training material
http://www.javamonamour.org/2012/04/osb-training-material.html
sample code
http://www.javamonamour.org/2010/04/osb-sample-code.html
enjoy!

Oracle Service Bus SSO with Proxy Service

Hi all,
I protect Proxy Service. It means only authenticated user can able to access it.
But when i want to access from my application server (weblogic), i don't want to authenticate again with OSB.
Is there any way to use SSO between application server and Oracle Service Bus ?
With Regards,
Wai Phyo

Hi Wai,
I think it is not supported with OSB. The doc says -
46.15 Is single sign-on supported in Oracle Service Bus?
Strictly speaking single sign-on (SSO) is not applicable to Oracle Service Bus messaging scenarios for several reasons. First, Oracle Service Bus is stateless; there is no notion of a session or conversation among multiple parties. Second, Oracle Service Bus clients are typically other enterprise software applications, not users behind a Web browser. Therefore, it is acceptable to require that these clients send credentials such as username and password on every request, provided that the communication is secured by means such as SSL or WS-Security. However, SSO between the Oracle Service Bus Console and the Oracle WebLogic Server Administration Console is supported. For more information, see "Single Sign-On" in "Security Fundamentals" in Oracle Fusion Middleware Understanding Security for Oracle WebLogic Server.http://download.oracle.com/docs/html/E15866_01/security_faq.htm#i1058723
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/security_faq.html#wp1053670
Regards,
Anuj

Unable to call BPM process webserivce from Proxy in oracle Service bus

I created business service in oracle service bus through BPM process WSDL. later Created proxy out of business service. In proxy service MessageFlow I created a route node with service as my BPM process business service. When i invoke proxy I am always getting the following error.
Request :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proc="http://bea.com/albpm/Sapme_test_1/Process">
<soapenv:Header/>
<soapenv:Body>
<proc:startSession>
<password>Participant</password>
<user>Participant</user>
</proc:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: General runtime error: socket write error: Connection aborted by peer</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: socket write error: Connection aborted by peer</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
I tried the same example with general webservice instead of BPM Process it is working fine.
regards,
pv

Even Some times I am getting the following error
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: BAD REQUEST</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>BAD REQUEST</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
regards,
pv

Need a help on implemening SAML with Oracle Service Bus

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Regarding Integration of Oracle Service Bus with Oracle Server 10g

Hi,
Could you please provide some docs or links so as to integrate Oracle Database with Oracle Service Bus. The requirement is that the data will be retrieved or saved or updated in the database after recieving inputs from the user. We are using OSB as middle wayer component between ORacle BPM Studio and ORacle Sever 10g. Please provide some help for the same. The data should move to the Oracle Database through ORacle Service Bus.
Thanks,
Abhishek

You need to first create an external resource for ALSB configuration. You can then use the configuration to connect to ALSB and create the structure for transferring the data.
You then have to configure a DB transport for updating the process data using ALSB.
Hope this helps.
Sarat

Example of Oracle Service Bus with DB Adapter

I need to integrate Peoplesoft HCM with another application using the OSB. How can I use DB Adapter with OSB to realise inserts in Oracle Database?

http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
He has posted some videos as well.
Thanks,
Vijay

Creating Managed Server for Weblogic that comes with Oracle Service Bus

I've installed Oracle Service Bus 10.3.
Weblogic Server 10.3 comes bundled with OSB 10.3.
Everything is working fine in the Admin Server.
But when I create a Managed server and try to start it, I get the following exception and server doesn't start :
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <Security> <iflmud6dlb5jn> <OSBManagedServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1257828872747> <BEA-090403> <Authentication for user weblogic denied>
####<Nov 10, 2009 10:24:32 AM IST> <Critical> <WebLogicServer> <iflmud6dlb5jn> <OSBManagedServer2> <main> <<WLS Kernel>> <> <> <1257828872747> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I've tried changing the boot.properties file and given clear text username and password, but even this did not change the exception.
Are there any other security concerns that are to be taken care of while configuring Managed Server for Oracle Service Bus?
Kindly help.

How are you starting the manageserver. Is it using command line or using NodeManager from Weblogic console of admin server. Most of the times we start managed server using yourDomain/bin/startManagedWebLogic.cmd (.sh).
startManagedWebLogic nameOfYourManagedServer adminURL(Ex: http://host:port).
If you created a managed server at the time of creation of domain itself using custom option, then under your domain root folder, you should see a file named like "startManagedWebLogic_readme.txt" that kind of gives the same above command.
If you added the managed server later on, to an existing single server domain, then you can use the above command.
Ravi Jegga

Query regarding the tutorial for Oracle Service Bus (OSB 10gR3)

Hi,
I am working on a tutorial of Oracle Service Bus (OSB 10gR3).
I have created the proxy service and the Business Service, using Oracle Service Bus console.
The details are as follows:
Proxy service: LoanGateway
Business service1: A value of 4.9 or less causes the message to be routed to the ManagerLoanReview business service.
Business service2: A value of 5.0 or greater causes the message to be routed to the NormalLoan business service.
When i send the request message, so that it gets routed from proxy service to one of the business service than it gives following error.
Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<exam:processLoanApp xmlns:exam="http://example.org">
<loanRequest xsi:type="java:LoanStruct" xmlns:java="java:normal.client" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<java:Name>Smith</java:Name>

<java:SSN>1234567</java:SSN>

<java:Rate>4.1</java:Rate>

<java:Amount>9000000</java:Amount>

<java:NumOfYear>10</java:NumOfYear>

<java:Notes>Manager Loan Application Review Service</java:Notes>
</loanRequest>
</exam:processLoanApp>
</soapenv:Body>
</soapenv:Envelope>
Response Document
The invocation resulted in an error: .
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-380002: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7021'
</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<http:Content-Type>text/xml; charset=utf-8</http:Content-Type>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
</con:metadata>

I have the same problem and I'm not able to telnet localhost on port 7021. How can I change this port number I think that port must be 7001, it is correct?Examples server domain is pre-configured for port 7021. The samples domain will have the examples properly deployed in this domain out of box. You dont need to change any thing in {BEA_HOME}\osb_10.3\samples\domains\servicebus\config.
I doubt this has to do something with firewall . Check the last statement in the log after starting the domain.
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.177.242.25:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "mneelapu", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Warning> <Server> <BEA-002611> <Hostname "XYZ-v411-10-177-242-25.oracle.com", maps to multiple IP addresses: 10.177.242.25, 127.0.0.1>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 19, 2009 8:50:09 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
What are you seeing in your log file?
Edited by: mneelapu on May 19, 2009 9:58 AM

Oracle Service Bus Proxy Testing with Attached Policy

Similar Messages

Maybe you are looking for