Oracle Service Removal

Hi all,
I have an issue where i cannot seem to remove an Oracle service from a Windows XP machine.
The XP machine was set up with the full Oracle Administrator Client to interact and develop with Oracle 9i on a windows 2003 server machine. Things all worked well until another application was installed that also set up a seperate Oracle Client. I have had to uninstall everything with the purpose of reinstall and configuring everything. Trouble is on the Windows XP machine an Oracle service called "OracleMTSRecoveryService" remains and i cannot seem to get rid of it prior to reinstalling the components.
I have tried using the command line regsvr32 with the /u switch but this does not work. i also tried using the Oracle installer application but the service still won't budge.
Any assistance would be appreciated. Thank you in advance.

Hi Alano
Have you tried the note id :
Subject:      WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms
     Doc ID:      Note:124353.1
for windows unintallation ?
Edited by: Hub on Oct 28, 2008 12:43 PM

Similar Messages

  • Oracle Services are not removed from system (10g, on Windows 2003)

    Hi,
    I haven't used Oracle on Windows Os before and not sure what to do.
    Here is what happened
    1- I installed 10g on windows 2003 server, created a database with service name OPER
    2- I was unhappy with the installation and removed it.
    3- then I installed Oracle 10g software again, creating a database again which has name IZROPER
    now, there are two of every oracle service in the services.msci
    service names containing the first db's (OPER) are still showing up in services, how can I remove them?
    ORACLEDBCONSOLEoper
    OracleJobSchedulerOper
    OracleServiceOper
    etc..

    start -- run -- > regedit
    In regedit mode --> HKLM -> SYSTEM -- currentcontrol set --> services --> here Oracle services are avilable , you can delete from here.

  • How to remove Oracle Services from Win NT Services

    I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
    How can I do this?
    Thanks

    Here are a couple of links to instructions as to how you might uninstall Oracle:
    From this forum:
    Re: HTML DB 1.6
    From elsewhere on the web:
    http://www.cryer.co.uk/brian/oracle/howto_orcl_uio.htm
    http://www.louisville.edu/it/twotier/oracleinstall/uninstall/
    http://www.orafaq.com/msgboard/windows/messages/1144.htm
    Good Luck

  • Removing Oracle Services from Win NT Services

    I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
    How can I do this?
    Thanks

    go to register, type regedit on run prompt
    register will open. go to hkey_local_machine then
    go to software and click oracle option
    and then find service name,
    and delete the service.
    otherwise you may stop the service by control panel
    before installation of software
    regards.

  • Removing Oracle Services

    Folks,
    Does anyone know of a way to remove redundant Oracle services from Windows 2000.
    Thanks in advance.

    There is a utility called "oradim" in windows environment to manage services. Look at the help by typing "oradim/h" in the command prompt and follow the syntax.
    Good Luck

  • Removing an Oracle Service

    I was asked to remove an oracle service and I did from the command line
    while the database was open. I was then told it's a bad practice.
    What is the implication of doing this?

    I did from the command linefirst tell how u did it from cmd line.

  • Getting error "URI index 0 is not valid" in Oracle Service Bus

    Dear Friends,
    I am receiving an error "URI index 0 is not valid" while executing Customization File in Oracle Service Bus. I am not able to figure out why it is happening. Please help.
    Thank you.
    Regards,
    Palak Mathur

    AbhishekJ wrote:
    Change the:
    <xt:value>
    <tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>
    <weight>1</weight>
    </tableElement>
    </xt:value>Section to:
    <xt:value>
    <tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">
    <tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>
    <tran:weight>1</tran:weight>
    </tran:tableElement>
    </xt:value>in your Customization File and try again.Hi Abhishek,
    I did the same thing. Actually, the deployment team was getting this error and they called me up to find out. I analyzed and sent the following response:-
    I was going through the Customization file. I removed all the elements from the file and started with only 1 envValueAssignments:-
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Weight</xt:envValueType>+
    +<xt:location>0</xt:location>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>+
    +</cus:envValueAssignments>+
    The customization file got executed perfectly. Then I added another envValueAssignments and it worked fine as well.
    Now, when I added
    +<cus:envValueAssignments>+
    +<xt:envValueType>Service URI Table</xt:envValueType>+
    +<xt:location xsi:nil="true"/>+
    +<xt:owner>+
    +<xt:type>BusinessService</xt:type>+
    +<xt:path>CommonServices/Business Services/ServiceAddressV1RS</xt:path>+
    +</xt:owner>+
    +<xt:value>+
    +<tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</URI>+
    +<weight>0</weight>+
    +</tableElement>+
    +</xt:value>+
    +</cus:envValueAssignments>+
    +, I got the above error, ie URI index 0 is not valid. If you check each element then you will know that tableElement defines a namespace as xmlns:tran="http://www.bea.com/wli/sb/transports" which is neither being used by the node nor its child elements. Also the error in server logs was:-com.bea.wli.sb.transports.TransportException: URI index 0 is not valid.+
    It stuck that we were doing something wrong here. I checked other elements in the same file and found that some of them were starting the node as <tableElement xmlns="http://www.bea.com/wli/sb/transports">. So, tableElements should be qualified with this namespace:-http://www.bea.com/wli/sb/transports. It was clear there was issue with qualified name of the element and hence I added the prefix "tran" and made entry as:-
    +<tran:tableElement xmlns:tran="http://www.bea.com/wli/sb/transports">+
    +<tran:URI>http://app-1ip-alsb-01.corp.intranet/ServiceAddressV1Proxy</tran:URI>+
    +<tran:weight>0</tran:weight>+
    +</tran:tableElement>+
    When I executed the changed customization file it worked. I checked with few more elements and they all worked making me sure that this was the error.
    So, the issue was that the OSB was not able to find any URI and for index 0 there was no URI available. Hence we were getting a weird error which was not at all user friendly. However, while making the OSb they must have thought that no one will make any manual changes (by hand in the file) and this error would be sufficient to tell that there is something wrong with the customization and we must regenerate the customization file.
    Only solution that we do not receive this error in future is rather than making changes to the customization file manually we should use OSB console or scripts to replace the properties. Otherwise we need to be very careful while touching the Customization file.
    Hope this helps.

  • Oracle Service Bus (OSB), Eclipse --- and statement of direction

    Can somebody please explain what this means in: http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
    +...The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based console)...+
    More specifically: what will happen to the Eclipse OSB plugin/workshop once the JDeveloper port is complete?
    A) will it cease to exist and/or be terminated?
    B) will it remain as is, without keeping the functionality in synch with new stuff in JDev?
    C) will it continue to evolve side-by-side with JDev?
    Thx,
    -J.

    I think it is clear that Oracle will remain commited to Eclipse in terms of deploying java applications to WebLogic, they will provide some plugins for some time to come. You will however see oracle specific products, such as OSB, Portal, etc removed from Eclipse and ported to JDev. The reason for this is that Oracle can release new releases within their timeframe. If Oracle rely on Eclipse to deliver some functionality before they can release new products then they will be doing their customers a disservice.
    This statement in the SOD clearly states that JDev is the strategic platform and the Eclipse IP will be ported to JDev in the future:
    Design-Time Environment
    JDeveloper is the IDE of choice for SOA development at Oracle. AquaLogic Service Bus users have traditionally been using the web-based console to design, manage and monitor ESB flows. The web console is a key differentiator for ALSB (now Oracle Service Bus) and will therefore remain a primary design
    environment moving forward.
    The web-based console was complemented in the 3.0 release with full IDE support in Eclipse. The Eclipse capabilities will be ported to Oracle JDeveloper to provide a
    one-stop IDE for all SOA design needs. Until that port is complete, customers will still be able to use the Eclipse environment as IDE (in addition to the web-based
    console).
    cheers
    James

  • Oracle Service Bus download

    The latest available Oracle Service Bus is Release 11gR1 (11.1.1.7.0) , I am looking for 11.1.1.6.0, where can I find it?
    Thanks in advance.
    Kranti

    Hi,
    I checked edelivery for the same, but it has been removed from there also.
    Better you asked yours Oracle sales representative for the same !!
    Abhinav

  • Implementation Of AIA on Oracle Service Bus

    Hi all,
    Anybody implemented AIA on Oracle Service Bus ?
    How much time will it take to implement this compare to AIA on SOA ??
    Can we refer this to client ??
    How was the performance ??
    Please refer to the URL below
    www.oracle.com/us/products/applications/057298.pdf
    Thanks
    Phani

    Anybody implemented AIA on Oracle Service Bus ?
    We implemented AIA2.3 on OSB 10gR3 for one of the top 3 PC makers.
    How much time will it take to implement this compare to AIA on SOA ??
    Initial setup (customizing EOL and removing conflicts etc) will take some time and effort. Once that is done building new flows is comparatively faster than to do so on SOA Suite. Though it will also depend on the complexity of the flows, more complex flows will be easier to develop on SOA suite.
    Can we refer this to client ??
    It completely depends on the requirements of the client. If they have a lot of stateless and simple/medium complex services to be built, its a good idea to use OSB. If a lot of stateful and complex flows need to built it would be better to use SOA suite. Also, the features and use cases of SOA Suite and OSB are different, so you would need to do a comparative analysis and see which products features suit your needs better.
    How was the performance ??
    Unfortunately because of some bad decisions during design there were certain problems faced during performance testing. Since AIA schema definitions are capable of carrying a lot of business data of an entity (a product or customer or asset for e.g.) the message sizes may become huge which causes a lot of problems. If you keep message sizes in control and any XQuery or XSLT transformations to be simple and properly tuned you should not face much problems. If you have a lot of transformations it would make sense to spend on an XML appliance as well. The same would be true for SOA suite as well, even SOA suite wont perform well if there are complex transformations on huge messages.

  • Start/Stop remote oracle service

    Is there anyway I could start/stop a remote oracle service? Please provide source code. Thanks!

    HI,
    Suppose ur Database resides on X machine
    and u want to do remote login from y or z ,
    follow the conditions and steps below
    1) You need to install servermanager utility in ur remote machine
    2)then u need to run orapwd.exe utility on ur remote machine with following command
    "orapwd file=<full path name where u want to keep ur password file > password=<password> entries=<no of DBAs u want that password file to be accessed by>"
    after this u need to change Parameter in initialisation file , u will find one entry called "REMOTE_LOGIN_PASSWORDFILE=NONE" u have to change it to " REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE" u can also control multiple dabases from this same password file for that u will have to change above entry to REMOTE_LOGIN_PASSWORDFILE=SHARED,after this
    u need to pass following command "ALTER USER SYS IDENTIFIED BY <PASSWORD U LIKE > "
    this will change the password of both INTERNAL and SYS, now if u want to give multiple user access to this file then simply u grant two roles to them "ALTER SYSTEM GRANT SYSOPER,SYSDBA TO <USERNAME>" (INTERNAL AND SYS have these roles by default) this will add that user to that file now that user can also go to servermanager.Now u can Connect with any of the user which u have added in passwordfile in ur machine, and can remotely start or stop database with following Commands "STARTUP" "SHUTDOWN" respectively
    *Note -
    1)Location of password file is OS specific
    2)if ur using windows then u need to remove one entry in registry "DBA_AUTHORISATION =''
    Have Fun

  • Uninstall Oracle Service Cloud Smart Client

    Hi All,
      This Application installed by going to the Web 
    http://<your_site>.custhelp.com/cgi-bin/<your_interface>.cfg/php/
    admin/launch.php
     This will create the All Programs> RightNow > RightNow (<your_site>).  and uninstall option in Programs and Features.
     Only thing is there is no application in registry?
    ("HKLM:\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\*\Products\*\InstallProperties" 
    ,"HKLM:\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Installer\UserData\*\Products\*\InstallProperties")
    So how do i uninstall by script?
    https://docs.oracle.com/cloud/latest/servicecs_gs/FAMDG.pdf
    As

    HI Jrv,
      They said there is no script and need to follow this? but can this script?
    1. Stop all instances of the Oracle Service Cloud;
    2. Remove all instances of Oracle Service Cloud
    via Control Panel > "Program and Features"
        - Click-Once web based installations will appear as "RightNow (sitename)"
    3. Remove the files and directories from the below paths:
        C:\Users\[USER_ID]\AppData\Roaming\RightNow_Technologies
        C:\Users\[USER_ID]\AppData\Local\Apps\2.0
    As

  • 11i Doubts - Oracle services ?

    Hi All / Chander
    Again I have few doubts, few services (like
    %db920_RDBMSHTTPServer,%_IASHTTPServer ) related to
    Oracle are set to manual & when I try to start it
    gives error msg, could you pls confirm that these
    services should not be started as its set to manual
    (pls confirm with your services list related to
    oracle)
    Doubt 2:
    My "Oracle Apache Server PROD" sometimes starts
    without any disturbance, but sometimes it starts
    during machine startup & suddenly it stops
    automatically. When I try to start it, it gives an
    error message stating there is an internal error &
    contact system admin...
    Then I removed the classpath environment variable
    (which I set it as ./), after the machine restart the
    Apache server was able to start. Pls advice on this
    issue too, was it due to the classpath setting?
    Path details:
    c:\oracle\prodora\8.0.6\bin;E:\jdk131\bin;E:\MKS\bin;E:\MKS\bin\X11;E:\MKS\mksnt;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem
    Doubt 3:
    I installed the entire application on my C: drive (80
    GB) Vison DB, when I opened the jserv.properties file
    I found for few entries it has D:\... instead of C:\.
    Then I changed it with "find/replace option" as C:\
    Note: D:\ drive is empty & nothing is installed here.
    Does it has any impact with the Apache service
    startup?
    Pls advice...
    Thanks & regards,
    Ambi

    [email protected] wrote:
    Path to oracle service file or folder where can i check services and port for oracleServices and ports for what, for different tools like EM , isql*plus or for the connectivity , like tnsnames and so on ? What's the db version in 4 digits?
    HTH
    Aman....

  • How to Uninstall oracle services for microsoft transaction server 64 bit

    Dear All ,
    I would like to know  how to Uninstall only oracle services for microsoft transaction server from 11G installtion. I was trying to use "deinstall.bat" but which removes everything from the system. When i use "Oracle Universal Installer" but it doesn't let me do it. I am using Oracle 11G with patch 8 on Windows server 2008.
    Any replies are highly appreciated.
    Thanks

    HI Salman,
    I am doing the following.
    1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
    Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
    I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
    If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
    Could Not start the OracleMTSRecoveryService on the local computer.
    Error 3: The system cannot find the file specified.
    Any help on how to resolve this issue will be highly appreciated

  • Delete oracle services

    How can I delete the following oracle services?
    OraclePI1102TNSListener
    OraclePI1102iSQL*Plus
    I have uninstalled the SAP system and manually deleted the registry keys
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\OraclePI1102TNSListener and
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\ORACLEPI1102ISQL*PLUS
    but these services still exist.
    I tried deleting these from the registry directly but it returns "Error while deleting key" HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_ORACLEPI1102TNSLISTENER
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_ORACLEPI1102ISQL*PLUS
    Thanks

    Hello Cons,
    Normally it should not be necessary to manually delete a service. Uninstalling an application should remove its associated service,are sure that you have unstalled all the compnents,just check in add or remove programs for any SQL component present and uninstall.
    However, the process is:
    Run Regedit or regedt32.
    Find the registry entry:
    HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services
    Find the service there and delete it.
    You may wish to look at the keys and see what files the service was using and perhaps delete them also.
    You will have to reboot before the list gets updated in server manager.
    I some programs are cunning and prevent you from removing their service easily. These change the permissions to make it more difficult for you to delete them. For these you will have to right click on the u2018serviceu2019 in regedit (regedt32), go to permissions and grant the administrator full control before the service can be deleted.
    Hope it helps
    Rohit

Maybe you are looking for