Oracle service run not by Local System user

Hi,
Our configuration is:
Oracle 10.2.0.3 SE RAC (2 nodes)
Windows
ASM
Currently Oracle service is run as Local System user.
My boss insists that we need to create a special user and run Oracle service as this user.
Could there be any issues if we change from Local System to different user?
Thanks,
Lev

There is no issue, if you change local system to different user.
Running Oracle service as Local System user is normal behaviour. Show the below link to your boss that no need a seperate account in Windows.
http://download.oracle.com/docs/html/B10130_02/intro.htm#i1005689
Hope this helps.
Regards
Satishbabu Gunukula
http://www.oracleracexpert.com
Click here to [createdisk, deletedisk and querydisk in ASM|http://www.oracleracexpert.com/2009/09/createdisk-deletedisk-and-querydisk-in.html]
Click here to [See the ORA-27102 Error and Soltuion|http://www.oracleracexpert.com/2009/08/ora-27102-out-of-memory-on-solaris.html]

Similar Messages

Oracle Services are not removed from system (10g, on Windows 2003)

Hi,
I haven't used Oracle on Windows Os before and not sure what to do.
Here is what happened
1- I installed 10g on windows 2003 server, created a database with service name OPER
2- I was unhappy with the installation and removed it.
3- then I installed Oracle 10g software again, creating a database again which has name IZROPER
now, there are two of every oracle service in the services.msci
service names containing the first db's (OPER) are still showing up in services, how can I remove them?
ORACLEDBCONSOLEoper
OracleJobSchedulerOper
OracleServiceOper
etc..

start -- run -- > regedit
In regedit mode --> HKLM -> SYSTEM -- currentcontrol set --> services --> here Oracle services are avilable , you can delete from here.

Oracle Services Does Not Start

Hi,
I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
Could anyone pls let me know the order in which the oracle services should start.
im sorry if my question confused you, bc'so im confused and stuck
Thanking u in advance
regards
Muraly

Hi,
you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
Atul

Urgent --oracle service is not starting

hi everyone,
in my server one of oracle service is not starting.
"oracleorahome81httpserver" if i try to start this service its telling that " error 1067, the process terminated unexpectedly.
i checked in cmd prompt, by r3trans -d. its telling " error <0012>
.i need the command for mounting the database.
its urgent...,
regards
gopi

hi
good
go through this link,hope this would help you to solve your problem
http://orafaq.com/usenet/comp.databases.oracle.server/2004/09/22/1495.htm
thanks
mrutyun^

Cannot create new Data Source - Oracle ODBC does not show in System DSN

On Windows 7 x64, Installed Oracle 10g to use ODBC to connect to Oracle database but am not able to create new data source as Oracle ODBC does not show in System DSN.... only shows SQL server etc etc...

If you installed 32-bit Database Client, try the 32-bit ODBC admin tool: C:\Windows\SysWOW64\odbcad32.exe
Note that 10.2.0.5 is the earliest "10g" version supported on Win 7.
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
As an alternative, try the 11.2 Instant Client.
For 32-bit apps: http://www.oracle.com/technetwork/topics/winsoft-085727.html
64-bit/x64: http://www.oracle.com/technetwork/topics/winx64soft-089540.html

Oracle service orcl not found in windows services

hello
i'm facing a very serious problem. MY server ORacleserviceorcl not found in services. all services currently up and running. but ORCL service not show there and my database is down how i start my database. i found this problem first time. plz help me how to Start oracle. my ORacle version 10g on windows server 2003

Niall,
Do you think that the OP should try the following command to re-create the service:
C:\> ORADIM -NEW -SID ORCLAs far as I have been able to determine, that command will not cause an issue, and will return an error if the service already exists.
To the OP: It is possible that a utility, such as HiJackThis, was used to remove the service, the Windows registry is corrupt, someone used ORADIM to delete the service, someone was hacking away in the registry and accidentally removed the entry for the service, or any number of other possibilities (I am not sure if MSCONFIG will remove a service when that program disables the service, but that might be another possibility, and dropping the database is another possibility).
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Jan 22, 2010 10:42 AM
Added the note about dropping the database as a possible cause - see if the datafiles still exist.

Netstat Shows Strange Services Running on iPhone Local Sockets

Hi all,
I've downloaded and run Netstat from the App Store on my iPhone 5S (iOS 8.1.1). My device is not jailbroken.
In analyzing Netstat's output, I am concerned regarding several local 127.0.0.1 sockets being used by unfamiliar services as listed below. 1) do you know what these services are, 2) do you see similar connections on your device, and 3) are these services safe?
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
8021
intu-ec-client
0
LISTEN
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
1084
ansoft-lm-2
0
LISTEN
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
1083
ansoft-lm-1
0
LISTEN
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
1082
amt-esd-prot
0
LISTEN
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
1081
pvuniwien
0
LISTEN
2014-12-07 12:13:14 EST
tcp4
127.0.0.1
1.0.0.127
1080
socks
0
LISTEN
Thanks so much for any help!

Hi Tech,
its safe my netstat show me the same sockets every Time.

Is possible to import the TR using TP.EXE with local system user

Hi ,
Currently I am trying to import the TR using the TP.exe. Could please let me know is mandatory to use <SID>adm user. If yes could please let me know the procedures.
Because I try with local user but it was failed. Even though I set same environment variable (Both User and System).
Regards,
Vivek

Hi ,
Please find the log below
I am using the correct commend. if i try in SIDADM user it working fine.when i try with local user is not working.So i was confused.
This is tp version 372.04.40 (release 701, unicode enabled)
TRACE-INFO: 1: [dev trc     ,00000] Thu May 12 00:09:50 2011                                     1042 0.001042
TRACE-INFO: 2: [dev trc     ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
TRACE-INFO: 3:                                                                                5 0.001047
TRACE-INFO: 4: [dev trc     ,00000]      using "E:\usr\sap\EC6\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
TRACE-INFO: 5:                                                                                5 0.001052
TRACE-INFO: 6: [dev trc     ,00000] } DbSlSdbControl(rc=0)                                         81 0.001133
TRACE-INFO: 7: [dev trc     ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
TRACE-INFO: 8:                                                                                8 0.001141
TRACE-INFO: 9: [dev trc     ,00000] } DbSlSdbControl(rc=0)                                          8 0.001149
TRACE-INFO: 10: [dev trc     ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202EBE0)
TRACE-INFO: 11:                                                                                8 0.001157
TRACE-INFO: 12: [dev trc     ,00000] } DbSlSdbControl(rc=0)                                          4 0.001161
TRACE-INFO: 13: [dev trc     ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000140E5A1E8)
TRACE-INFO: 14:                                                                                15 0.001176
TRACE-INFO: 15: [dev trc     ,00000] } DbSlSdbControl(rc=0)                                          5 0.001181
TRACE-INFO: 16: [dev trc     ,00000] { DbSlSdbConnect(con_info_p=0000000000000000)                  18 0.001199
TRACE-INFO: 17: [dev trc     ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)         18 0.001217
TRACE-INFO: 18: [dev trc     ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)          7 0.001224
TRACE-INFO: 19: [dev trc     ,00000]    (0.024) Default value for max. input variables is 2000 (note 655018)
TRACE-INFO: 20:                                                                                9 0.001233
TRACE-INFO: 21: [dev trc     ,00000]    (0.024) Profile parameter to define max. input variables (note 655018)
TRACE-INFO: 22:                                                                                9 0.001242
TRACE-INFO: 23: [dev trc     ,00000]    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
TRACE-INFO: 24:                                                                                8 0.001250
TRACE-INFO: 25: [dev trc     ,00000]    (0.024) Input parameters for SQL statements increased (note 655018)
TRACE-INFO: 26:                                                                                7 0.001257
TRACE-INFO: 27: [dev trc     ,00000]    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
TRACE-INFO: 28:                                                                                8 0.001265
TRACE-INFO: 29: [dev trc     ,00000]    (0.018) More trace in case of packed to string conversion error (note 1262799)
TRACE-INFO: 30:                                                                                13 0.001278
TRACE-INFO: 31: [dev trc     ,00000]    (0.016) R3trans export aborts with signal 6 (note 1262245)
TRACE-INFO: 32:                                                                                7 0.001285
TRACE-INFO: 33: [dev trc     ,00000]    (0.009) IA64 alignment errors (note 1245982)                  7 0.001292
TRACE-INFO: 34: [dev trc     ,00000]    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
TRACE-INFO: 35:                                                                                7 0.001299
TRACE-INFO: 36: [dev trc     ,00000]                                                                  4 0.001303
TRACE-INFO: 37: [dev trc     ,00000]   -> init()                                                      6 0.001309
TRACE-INFO: 38: [dev trc     ,00000]   -> sdb_malloc(size=18) : 0000000002810EB0 (34 bytes allocated)
TRACE-INFO: 39:                                                                                18 0.001327
TRACE-INFO: 40: [dev trc     ,00000]    STATEMENT_CACHE_SIZE = 1000                                  46 0.001373
TRACE-INFO: 41: [dev trc     ,00000]   -> sdb_malloc(size=152000) : 00000000028B9FA0 (152050 bytes allocated)
TRACE-INFO: 42:                                                                                16 0.001389
TRACE-INFO: 43: [dev trc     ,00000]   -> sdb_malloc(size=656000) : 0000000002C200B0 (808066 bytes allocated)
TRACE-INFO: 44:                                                                                13 0.001402
TRACE-INFO: 45: [dev trc     ,00000]   -> sdb_malloc(size=288000) : 0000000002CC10B0 (1096082 bytes allocated)
TRACE-INFO: 46:                                                                                11 0.001413
TRACE-INFO: 47: [dev trc     ,00000]   -> sdb_malloc(size=16144) : 0000000002D080B0 (1112242 bytes allocated)
TRACE-INFO: 48:                                                                                11 0.001424
TRACE-INFO: 49: [dev trc     ,00000]   -> sdb_malloc(size=32048) : 0000000002D0C020 (1144306 bytes allocated)
TRACE-INFO: 50:                                                                                11 0.001435
TRACE-INFO: 51: [dev trc     ,00000]   -> loadClientRuntime()                                       358 0.001793
TRACE-INFO: 52: [dev trc     ,00000] Loading SQLDBC client runtime ...                               7 0.001800
TRACE-INFO: 53: [dev trc     ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
TRACE-INFO: 54:                                                                                339 0.002139
TRACE-INFO: 55: [dev trc     ,00000] SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 011-123-196-300
TRACE-INFO: 56:                                                                                8 0.002147
TRACE-INFO: 57: [dev trc     ,00000] SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300             21 0.002168
Regards,
vivek

Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

Oracle Service will not start

I am unable to start an oracle database service.
Oracle 8.1.7 on Windows NT 4.
The sidALERT.log file has, among others, the following errors:
ORA-00600: internal error code, arguments: [4511], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [25012], [7], [652], [], [], [], [], []
ORA-00600: internal error code, arguments: [504], [49130332], [2], [1], [cache buffers chains], [155], [0], [49318372]
ORA-00600: internal error code, arguments: [25012], [7], [652], [], [], [], [], []
Any assistance is greatly appreciated.

ORA-600 = go to http://metalink.oracle.com
Would it be possible to pick a thread to tell that at the top of this forum ?
Fred

I have transferred my iTunes library from a PC to a Mac. Many of the albums will not run (not authorized) The system asks for old email account and passwords I used years ago. I have no idea what they are. How do I get around this?

Having transferred my iTunes library from my old PC to my new Mac. Many of the albums will not play because they are not authorized. Authorization lists very old email addresses of which I do not have the passwords or, in fact, access to the email websites. Can anyone whelp me with a way to get around this?

Yes, I believe I did with no success playing some of my "old albums." The remaing albums worked just fine.
I think I found a workaround by signing in to the old website using "forgot" password and changed it to a new one. Then I signed in using my Apple ID and Passwird. This seems to have worked.

Oracle 9i running forms and reports with user/pass

Hi all!
How can I hide the user name and password in the internet explorer as it is shown in the full path for the sake of security I need it and also how can I pass the user/pass from a form to report without showing in address bar of Internet Explorer.
Regards
Mayank Sharma

Dear Mayank,
You can use "CGICMD.dat" file. This file can be used to add key mappings.
You add following lines at the end of this file.
MYKEY: USERID=<user_name>/<password>@<connection_string> %*
You need to restart your OC4J Instance to make above changes effective..
Then, in your web.show_document url include "CMDKEY=MYKEY".
This will definitely solve your problem.
Regards,
Manish Trivedi
Ambuja Cement,
India.
[email protected]

Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

Environment:
OS: Windows 7 32/64 bit, Windows 2008 Server 64
bit/ Windows 2012 Server 64 bit
Priority:
- Critical
Requirement: - Since
the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
command
net use z: \\servername\sharedfolder /persistent:yes.
Already Attempt:
We tried to launch the CMD.exe using the DOS Task Scheduler AT command. Here’s a sample command:
AT 10:36 /interactive cmd.exe
But I received a warning that “due
to security enhancements, this task will run at the time excepted but not interactively.”
It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
Interactive services no longer work on Windows 7, Windows Server 2008 and above.
2. We
tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
<Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
start RunCMDAsLSA
In this case the service fails to start and results it the following error message:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
3. One
suggestion, we found to launch CMD.exe via a Scheduled Task, but
it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
4. I read an article, which
demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
psexec -i -s cmd.exe
PSTools worked fine, but It seems that in scope of Sysinternals Software License
Terms. You may not "use the software for commercial software hosting services."
Application will deploy on client, which will be like commercial,
so we are not able to use PSTools.
Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
I will be really thankful.

Hi Sir,
Nothing worked from above for us. You can see our remarks on posted query.
That’s why, we posted on forum.
And there will not be any vulnerability, because, if we will use "net
use ..."
in network domain; definitely,
we will provide username and password of mapped drive system.
And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
We need a way; by which we can complete the requirement. Kindly assist.
Regards,
S. P. Singh

Oracle 10g on Windows 2003: Can't start with any account but Local System

Fresh install of Oracle 10g on Windows 2003. I install as a member of the local admin group and everything works great. The various services are starting as Local System, though, and I'd prefer to set them up to start as a specific domain user account.
When I make that change, however, I can't get any of the Oracle related services to start. I've added this domain user to the local ora_dba group on my server, given it the ability to log on as a batch job and log on as a service in the local security policy. Doesn't seem to help.
I saw a thread that implied using a domain user account wasn't supported (didn't seem right to me, but what the hell), so I created a local user account and tried that. Same result.
Something I'm missing?
Thanks.

What is missing, I suspect, is reading the installation docs.
http://docs.oracle.com
If that doesn't work then come back and ask specific requestions referencing the appropriate document and naming the actual version you are trying to install (ps 10g is a marketing name not a version number).

After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

     After
sql server 2012 installation, I   attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
     Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
     Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )

Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ?

Oracle service run not by Local System user

Similar Messages

Maybe you are looking for