Oracle Services Does Not Start

Hi,
I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
Could anyone pls let me know the order in which the oracle services should start.
im sorry if my question confused you, bc'so im confused and stuck
Thanking u in advance
regards
Muraly

Hi,
you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
Atul

Similar Messages

  • Oracle Service does not start after installation of Domain role

    Hi all,
    here is my setting:
    Windows Server 2008 R2 64bit
    ORACLE ONE 11g
    I installed the database and it was working fine until I installed the domain controller role on this server.
    Finally I needed to uninstall this role again and restarted the server several times during this process.
    Now I can not access the database anymore. Listener starts, then stops.
    database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
    Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
    This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
    And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
    Thanks in advance...
    Meden
    Edited by: user10859969 on 13.01.2012 14:29

    And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
    So the best solution is CTRL-ALT-DEL and start all over again.
    If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
    Sybrand Bakker
    Senior Oracle DBA

  • Opmn service does not start when try to start Oracle BI Services

    Hi ,
    I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
    When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
    If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
    Any Idea how to fix this one.
    Thanks

    Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

  • OracleOraDb10g_home1TNSListener service does not start

    I am using Win XP. I have installed Oracle 10g.
    OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
    As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
    what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
    Thanks

    Oracle installation was successful.
    after lsnrctl start
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
    :29
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
    a
    Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
    Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
    c-wireless.uc.edu)(PORT=1521)))
    TNS-12545: Connect failed because target host or object does not exist
    TNS-12560: TNS:protocol adapter error
    TNS-00515: Connect failed because target host or object does not exist
    32-bit Windows Error: 49: Unknown error
    Listener failed to start. See the error message(s) above...
    After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
    Thanks.

  • Inventory service does not start 610 failed login

    L.S.
    Netware 6.5, SP6
    ZEN 7.01SP1IR1
    Sybase database
    Standalone server
    My inventory service does not start. I've looked around but did not yet find the solution. I did have an error I've read nothing about:
    logger screen: java:Class com.novell.....ZENWorksInventoryservicemanager exited with status -1
    C1, Inventory service object shows 610: database location policy is not configured (but it is)
    NRM: health, failed login: user: .CN=Server package_ZENSERVER:Netware:ZENDateBase.O=context.T= tree
    Any suggestions
    Thomas Roes

    Thomasroes,
    either of these help?
    http://www.novell.com/support/php/se...1%200%20506894
    http://www.novell.com/support/php/se...1%200%20506894
    Shaun Pond

  • PIA service does not start

    Hi,
    my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
    Do you have any idea for that ?
    In windows Evenetlog it says Event Type:     Warning
    Event Source:     beasvc
    Description:
    peoplesoft-PIA service stopped
    Thank for help.

    after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
    or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
    ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
    even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
    bea logs are under bea DIR.
    Thnks!

  • Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

    Hello,
    I am having an issue when I start my TMG 2010 machine:
    (*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
    The service "Microsoft Forefront Server Protection for Exchange Registration Service"
    does not start, it is set to "Manual".
    I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
    Thanks in advance.
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

    Hi,
    Have you received any errors in event logs when
    you started the Microsoft Forefront Server Protection for Exchange Registration Service?
    Based on my research,
    Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
    Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
    The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
    down and does not need to be running for transport scanning to occur.
    You can refer to the link below:
    Services
    Best regards,
    Susie

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • ACS 3.3 - CSAdmin service does not start

    Hello all,
    I'm running Windows 2003 Server (Enterprise). I installed the eval version of ACS 3.3. The installation process was successful. However, the CSAdmin service does not start. There is an Event Log error that states:
    Failed to initialize AAA Client Config Module.
    Anyone seen this before?
    Let me know if anyone has any suggestions.
    Thanks,

    Saw this and it turned out to be the user had eTrust virus scanning on the server also. Removing that and reinstalling the ACS software fixed it up. Can you check that you don't have that specific software (we may need to file an incompatibility bug), or try removing any other virus/firewalling software that may be causing issues.

  • CiscoWorks Tomcat Servlet Engine service does not start

    Hello!
    CiscoWorks  Tomcat Servlet Engine service does not start.
    Events in the Windows Event Viewer:
    The CiscoWorks Tomcat Servlet Engine service terminated unexpectedly. It has done this 1 time(s).
    output pdshow and file stderr.log,  hs_err_pid2128.log attached.
    Do  you have an idea how to resolve this?
    Thanks!

    The only things which I see are wrong are the start types for the IPM NG database engine and HUM database engine services.  They must be set to Manual, not Automatic.  However, that would not account for the Tomcat crash.  The crash points to an error in the code which processes regdaemon.xml, but I see no reason why that should be failing.  As I said before, I think it would be best to open a Service Request.  Remote access would be helpful to dig into this problem in more detail.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • W2k8R2sp1::Eventlog service does not start::cause: JavaWS service does not start

    Windows Web Server W2k8R2sp1 Problem
    Eventlog service does not start
    - Cause: Java Web Start does not start
    -- Cause: Had a virus in "C:\Program Files (x86)\Java\jre1.6.0_03\bin\javaws.exe"
    (AVG removed file. Re-installed java in: S:\Java\re1.8.0_31
    In registry: file-paths seem to be okay (regedit find: javaws, Java Web Start)
    Can't find a solution on-line.
    What to do?
    It is a dedicated production server managed by remote desktop (Leaseweb.com, ip: [37.48.64.130])
    Any help will be highly appreciated.
    Thanx in advance, 
    Dick

    Hi Vivian,
    Rebooted several times
    The point is the event-viewer is not working. Because the eventlog-process is not running/starting. Because JavaWS-process isn't starting 
    Registry: http://niceware.com/zen/All_registry_20015-03-25_reg.txt
    Processes: http://niceware.com/zen/services-2015-03-25_csv.txt
    This is some info by SC.EXE:
    =========================
    CMD in elevated mode:
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sc queryex eventlog
    SERVICE_NAME: eventlog
            TYPE               : 20  WIN32_SHARE_PROCESS
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 1068  (0x42c)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
            PID                : 0
            FLAGS              :
    C:\Windows\system32>sc queryex javaws
    SERVICE_NAME: javaws
            TYPE               : 10  WIN32_OWN_PROCESS
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
            PID                : 0
            FLAGS              :
    C:\Windows\system32>sc start javaws
    [SC] StartService FAILED 1053:
    The service did not respond to the start or control request in a timely fashion.
    ========
    C:\Windows\system32>sc start eventlog
    [SC] StartService FAILED 1068:
    The dependency service or group failed to start.
    ========
    C:\Windows\system32>sc qc javaws
    [SC] QueryServiceConfig SUCCESS
    SERVICE_NAME: javaws
            TYPE               : 10  WIN32_OWN_PROCESS
            START_TYPE         : 2   AUTO_START
            ERROR_CONTROL      : 0   IGNORE
            BINARY_PATH_NAME   : S:\Java\re1.8.0_31\bin\javaws.exe
            LOAD_ORDER_GROUP   :
            TAG                : 0
            DISPLAY_NAME       : Java Web Start
            DEPENDENCIES       :
            SERVICE_START_NAME : LocalSystem
    C:\Windows\system32>sc qc eventlog
    [SC] QueryServiceConfig SUCCESS
    SERVICE_NAME: eventlog
            TYPE               : 20  WIN32_SHARE_PROCESS
            START_TYPE         : 2   AUTO_START
            ERROR_CONTROL      : 1   NORMAL
            BINARY_PATH_NAME   : C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
            LOAD_ORDER_GROUP   : Event Log
            TAG                : 0
            DISPLAY_NAME       : Windows Event Log
            DEPENDENCIES       : javaws
            SERVICE_START_NAME : NT AUTHORITY\LocalService
    C:\Windows\system32>

  • Urgent --oracle service is not starting

    hi everyone,
    in my server one of oracle service is not starting.
    "oracleorahome81httpserver" if i try to start this service its telling that " error 1067, the process terminated unexpectedly.
    i checked in cmd prompt, by r3trans -d. its telling " error <0012>
    .i need the command for mounting the database.
    its urgent...,
    regards
    gopi

    hi
    good
    go through this link,hope this would help you to solve your problem
    http://orafaq.com/usenet/comp.databases.oracle.server/2004/09/22/1495.htm
    thanks
    mrutyun^

  • Oracle Agent Service Does not start

    My agent service of oracle does not start. It stops immediately after starting.
    could you also let me know the role played by agent and listenser service.
    I am using windows 2003 server and version of oracle is 9i

    The listener is a separate process that runs on the database server computer. It receives incoming client connection requests and manages the traffic of these requests to the database server.
    The Intelligent Agents are responsible for the localized execution of tasks and the on-going monitoring of databases and other targets on the managed nodes.Intelligent Agents function independently of the databases and other targets they support.
    agntsrvc.log shows any errors that occur during agent startup.
    Vinod

  • Oracle DBconsole service does not start

    Hi,
    Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
    Thanks for your help.

    Thank you Madrid. I resolved the problem. I had this :
    set ORACLE_SID=ORCL2
    C:\Documents and Settings\> emctl stop dbconsole
    OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
    Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
    My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
    can anyone answer please ?
    Message was edited by:
    user522961
    Message was edited by:
    user522961

  • Oracle Process Manager(instance1) Service does not start

    Hello Friends,
    My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
    Kindly suggest any solution. I am using OBIEE 11.1.1.7

    Thank you Reddy for your reply.
    I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
    [2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
    Authentication Failure.
    Odbc driver returned an error (SQLDriverConnectW).
    State: 08004.  Code: 10018.  [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
    File:odbcuserpoploaderimpl.cpp

Maybe you are looking for