Oracle Services & Management Server

(1) I had installed Oracle 8.1.7 on Window2000 Advance Server. Generally in NT Server, upon restarting
server all services come up automatically, but my Oracle Services shows started and when I try to
connect through SQL Plus it gives me error "0RA-27101 - SHARED MEMORY REALM DOES NOT EXIST". So to
start up database I am using svrmgrl option.
Can somebody help in configuring services so that when I start server all services also come up
automatically.
(2) Also when I am trying to take Backup, it prompt message saying that connect to Oracle Management Server
and launch this Wizard. But I am not been able to configure my Oracle Management Server.. Can somebody
tell me how to configure Oracle Management Server so that I can take-up cold as well logical back up
using this option.

Hi,
If you have installed Enterprise Manager on your system, it comes with Configuration Wizard. The Configuration Wizard helps you to configure and set up OEM interactively.
You can find the information to configure the OEM under Oracle Enterprise Manager Configuration Guide has step-by-step procedure for setting up the OEM. You can find this documentation under the link
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/em.817/index.htm
Best of Luck
Mahesh

Similar Messages

Oracle Configuration Manager Server is unavailable (500)

I have a few targets that report configuration to My Oracle Support using Oracle Configuration Manager. Everything was fine until last week, when I noticed that the Last Collection Date wasn't changing. When I try to manually collect, I get the following error:
E:\>ora11\product\11.2.0\dbhome_1\ccr\bin\emccr collect
Oracle Configuration Manager - Release: 10.3.8.1.1 - Production
Copyright (c) 2005, 2013, Oracle and/or its affiliates. All rights reserved.
Unable to determine if mandatory packages available.
Error encountered in retrieving update. Oracle Configuration Manager Server is u
navailable (500).
Collection and upload failed.
E:\>
Anybody else experiencing this same problem? If so, any ideas how to fix it?

Turns out this is expected, as Oracle is rolling out a database upgrade. This notice is posted on MOS:
Configuration Data in Read-Only Mode
We are making improvements to the database that holds configuration data for My Oracle Support. During this upgrade, the Customer Configuration Repository (CCR) is currently in read-only mode. You can view configuration data, but will not be able to upload new configurations or change configuration-related systems attributes. The CCR will remain in read-only mode until the planned My Oracle Support outage completes this weekend.
While CCR is in read-only mode, you will see an error message:
   In the related log file during an automatic attempt to upload a new configuration or for offline Collector users who upload their configuration as a Service Request attachment.
   On pages within My Oracle Support that access the configuration data
   Primarily under the Systems tab
   Sometimes within Patch recommendations and Health Checks
When the CCR returns to update-mode after the outage, your last successful upload will remain in place as the benchmark for determining differences with the current configuration. The next collection you send will update your configuration and then becomes the configuration used for comparisons.
Please file a non-technical Service Request or contact Oracle Support if you need help or have additional questions.

Problem installing Oracle Identity Manager Server 9.1

Hello,
I try to install oracle identity Manager Server 9.1, but I'm having a problem.
Oracle identity manager 9.03 is already installed with jboss-4.0.3SP1 and j2sdk1.4.2_15
and oracle 10.2.0
So I follow these steps to clean out the db:
1. Drop tablespace: drop tablespace oimtbs including contents;
2. Drop user: drop user oimuser cascade;
and ran prepare_xl_db.bat as instructed. No errors in the log.
I ran the DiagonasticDashboard : the db setup was fine.
When I ran the installer "setup_server.exe", i haved this message :
Folowing Error occured during schema creation
Error encountered while loading database script
E:\OIM_Install\OIM9100\installServer\Xellerate/db/oracle/xell.sql
Please contact your DBA!
maximum key length (1478) exceeded
Does anybody have any idea what this error is about ?
Thanks.

Index IDX_LKV_LKV_ENCODED on Table LKV (Column :- LKV_ENCODED - VARCHAR2(3000)) is failing on 2k block size. Though all the Indexes are working fine with the 4k block size.
But OIM Dev team recommends to create the 8k block size for the Index storage.
Because the blocksize affects the number of keys within each index node, it follows that the blocksize will have an effect on the structure of the index tree. All else being equal, large blocksizes will have more keys, resulting in a flatter index than the same index created in a 2k tablespace. A large blocksize will also reduce the number of consistent gets during index access, improving performance for scattered reads access.
HOW TO CREATE THE INDEXES IN LARGER BLOCKSIZE TABLESPACE
In the existing database:-
Create a tablespace with the 8k blocksize, For Example
First,
Set the system cache size for that particular db block size
sql> alter system set db_8k_cache_size=100M;
sql> CREATE TABLESPACE db_8k_tablespace DATAFILE 'C:/oracle/product/10.2.0/oradata/8k_file.dbf' SIZE 100M BLOCKSIZE 8192;
Then
Reorganize the Index using command:-
sql> Alter Index <Index_Name> Rebuild tablespace <Tablespace_Name>
Regards,
Neeraj Goel

Stopping connections to Service Manager server during an upgrade

Planning an upgrade from 2012 SP1 to R2. The more I read, the more questions I have. Document from MS says to make sure there are no connections to the Service Manager server during the upgrade. How is this possible? Most of our connections are through
Citrix so we can check Citrix connections and disconnect them but what about local installs of the console on client computers? Is there some shell command to run to see active connections and terminate them? If so, how to you keep them from reconnecting?

It's not really a big deal. just declare downtime and shut down your load balancer. a few errant connections won't cause a problem, but any changes that are submitted may not be saved.

Oracle service registy server startup issue.

hi
I have installed the oracle service registry . After that i have created the OSR specific domain in weblogic server as per the OSR installation guide.
admin server and osr_server1 instances created in that domain.
when i am trying to start OSR server from weblogic admin console server is not starting.
it is showing the follwing messages.
For server osr_server1, the Node Manager associated with machine osr_machine1 is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
if anybody have idea on above issue. please provide inputs.
Edited by: 948123 on Jul 23, 2012 7:16 AM

Hi,
First thing, do you have a Node Manager running?
Go to the console and check on Environment > Machines > <your machine> > Monitoring > Node Manager Status...
It should say "Reachable" and the version number...
If your Node Manager is running there is a nodemanager.log file in $MW_HOME\wlserver_10.3\common\nodemanager... Tell us what you see there...
Please let me know if this was helpful...
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Oracle 8i Management Server???

Help!
I know nothing about Oracle, but am expected to administer a datatbase. I am trying to open up the Enterprise Manager (OEM) but keep being asked for information about a Management Server.
In my services, there is a Management Server, but I am unable to start it.
Can anyone tell me how to start, add, configure a Management Server so that I can start the OEM???
thanks,
amber

You have to set up a repository for OMS.
Go to Enterprise Manager Configuration Assistant and configure a repository. It will ask you to create user_name, password and the database name . Then you can start Mangement server from your services.
Hope this will help.
dinesh

Oracle 8i Managment server

dear sir,
i had installed oracle 8i on windows nt. now i tried to open enterprise manager it ask for managment server what is this and how can we create or define a managment server ?
thanks in adavance,
nikunj

Same problem here. When I try to start Enterprise Manager 2 Performance Monitor it asks for an management server. How do I configure a management server. I run OEM on Windows 98, The same PC also has Personal Oracle 8.1.6 on it. I want to configure this Database as the Management server. I have to monitor many Databases on NT/Unix on my network. Please help. I've been breaking my head since days together.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nikunj Thaker ([email protected]):
dear sir,
i had installed oracle 8i on windows nt. now i tried to open enterprise manager it ask for managment server what is this and how can we create or define a managment server ?
thanks in adavance,
nikunj<HR></BLOCKQUOTE>
null

Issue with installing second Service Manager server

We decided to install a second SM server to use as a test following the KB from MS below:
http://technet.microsoft.com/en-us/library/dn520899.aspx
We later found out that this install process had some issues and we needed a hotfix from MS to resolve it. The hotfix is basically a whole new installer MSI. MS had me uninstall SM and then reinstall using the MSI they gave me.
I am not getting the following error trying to do the install
Install Services
An error occurred while executing a custom action:_CreateMOMRegKey.
The upgrade attempt has failed before permanent modifications were made.
Upgrade has successfully rolled back to the original state of the syste. Once
the corrections are made, you can retry upgrade for this role.
The install rolls back and thats it. MS has been somewhat helpful but we still haven't gotten it resolved. Anyone else try installing this hotfix version of SM and run into the same issue?
The KB that refers to the replacement MSI is
KB2862620.

among other things, _CreateMOMRegKey creates registry keys related to ops manager and service manager. This is a common error with a management server reinstall, since these keys are not removed by an uninstall, and the creation method apparently does
not handle the case where they already exists. Consider
this thread.
The long and short of it is that you will probably need to remove the registry keys [HKLM\Software\Microsoft\Microsoft Operations Manager] and [HKLM\Software\Microsoft\System Center] as well as restore your management server's encryption key from the backup
you made after installing the first time.

How to Determine the Oracle Identity Manager Server Version?

Friends,
I have two questions about the Identity Manager...?
How to Determine the OIM 11g Server Version?
How to Determine the OIM 9 Server Version?
Thanks

The bundle patches are found by build number. If you go to metalink and check the bundle patches, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. This is written to the XSD table during patching. Once installed, there is no identifier that says "BPXXX applied".
-Kevin

Oracle VM Manager/Server Developer VMs

Hi,
I am working with the pre-built developer VM's for OVS and OVM and I am new to the Oracle VS/VM area. They are very handy to have and I have used them to create a working eBusiness image. However, I cannot seem to shut them down rather I always have to suspend them, because if I do not then I always have a running (error) or starting (error) status for my server pool when I try to restart them.
It is also impossible to export the appliance in this state, as it basically shuts them down and then when i reimport the appliance and it restarts, I have the same problem again. What could be causing the (error) statuses? I do not know quite where to look. I try starting them in different orders, but none of this seems to work. I would prefer not to have to reimport and redploy the images as it takes the best part of a day to do with no guarantee that I will not get this problem again.
Anything is appreciated.

There is a forum dedicated to virtualization. I admit it doesn't seem to get as much traffice as this place, but it might be worth posting there to see if you can tap into some VM experts (some of the specialist forums are monitored by Oracle employees, although I don't know for sure that such is teh case with Virtualization).
Cheers, APC
blog: http://radiofreetooting.blogspot.com

Problem installing Oracle Identity Manager Server

Hello,
this is my first time trying to install this product, and I'm having a problem.
I'm installing it on my development box - Windows XP.
I set up Oracle 10g Release 2, created a database instance,
and ran prepare_xl_db.bat as instructed. so far so good.
When I ran the installer "setup_server.exe"
it displayed this error message:
Following Error occured during schema creation connected
ERROR loading database script
.......\OIM9.0.1.1\installServer\Xellerate/db/oracle/xell.sql!
Please contact your DBA!
ORA-00600: internal error code, arguments: [12259], [], [], [], [], [], [], [] [10/18/06 6:16 PM]
so, I aborted the installation.
I recreated the database instance, and tried manually running xell.sql using sqlplus to see if I can reproduce the error, but it worked fine.
I only get the above error whenever I use the windows installer.
Does anybody have any idea what this error is about and how to work around?
I would really appreciated it. Thanks.

HI,
As a check of db setup before installing the server
1. Did you run the DiagonasticDashboard to check if the db setup was fine?
if not it is worth the try.
Just for you info, proper way to run the prepare_xl_db.bat is
in the command prompt change the directory to where the prepare_xl_db.bat resides.
$<dir where bat exists> prepare_xl_db.bat orcl E:\oracle\product\10.2.0\db_1 oimuser abcd1234 oimtbs E:\oracle\product\10.2.0\oradata\orcl oimtbs_01 TEMP abcd1234
· Where prepare_xl_db.bat <ORACLE_SID> <ORACLE_HOME> <XELL_USER> <XELL_USER_PWD> <TABLESPACE_NAME> <DATAFILE_DIRECTORY> <DATAFILE_NAME> <XELL_USER_TEMP_TABLESPACE> <SYS_USER_PASSWORD> are the switch options.
· This will create the OIMUSER database account, create the OIMTBS tablespace, grant privileges to the user, and specify other database settings.
Install the Diagonastics Dashboard
Assuming you are using JBoss
Strop JBoss server
1. copy <OIM dir>:\OIM_Installs\oracle_identity_manager\DiagnosticDashboard\XIMDD.war <JbossDir>:\jboss-4.0.2\server\default\deploy
2. Start JBoss
3. Wait for JBoss to finish starting completely.
Verify database from Diag Dashboard
4. Access Diag Dashboard from your favouriate browser http://<Host>:<port>/XIMDD
5. In the browser, click Diagnostic Dashboard
6. Select the Test Name: Oracle Database Prerequisite Check and enter your db values.
7. click Verify and analyze the response
Hope this helps!
-Bala

Registration Service is unavailable (500); Oracle Configuration Manager

Getting error while installing OCM in red hat 4 linux server.
setupCCR -R ocm.rsp
** Registering installation with Oracle Configuration Manager server(s) **
Failure in registering with Oracle Configuration Manager server
Error encountered in registering. Registration Service is unavailable (500).

i am using proxy server , a day back it is wrking fine , but today i am seeing this error.
How can i test opening web page from my server ?Please let me know the steps?

Fresh install of Oracle VM Manager Template into Oracle VM Server

Hi,
I am trying to install the Oracle VM Manager template and then
create an Oracle VM Manager client.
I have already done a 'fresh install' of Oracle VM Server.
I do not have another machine available to use to contain the
'Oracle VM Manager', therefore, I am attempting to install the
Oracle VM Manager template directly into an Oracle VM Manager Server and
run the client.
I am following the instructions of the Oracle VM Server Users Guide
in section 4.3.
When I extract the zip file contents into the
/OVS/seed_pool directory, I get the following files.
Deploy_Manager_Template.sh
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
So far, so good.
Next, I used 'tar' to help me extract the directories of the .tgz file.
So far, so good.
Next, as instructed, I used 'python' and 'print randomMAC()' to create a new MAC address.
Inside the /OVS/seed_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM/vm.cfg file
I modified the vif MAC address. I replaced the
xx:xx:xx with the 'last three' that were generated by the python randomMAC
function from above.
vif = [ 'mac=00:16:3E:<my generated numbers>', ]
So far, so good?
In the Oracle VM Server Users Guide in section 4.3.,
The next step, expains that I should run
xm create mv.cfg
I did this. When I ran this I received back the error.
Using config file "./vm.cfg"
Error disk is not accessible.
When I peek inside my vm.cfg file.
I see file references starting with the following
file:/OVS/running_pool/ ...
Of, course my running_pool directory is empty.
(Again, this is a fresh install of Oracle VM Server).
My first question is the following.
Sometime in this process was I supposed to run
the the following executable?
./Deploy_Manager_Template.sh
If so, should I have done this early?
Was the modification of the vif (of adding the MAC address
into the vm.cfg file, something I 'should have not done'
or 'something that could be ignored' because the
'./Deploy_Manager_Template.sh' would have done this for me?
My second question is the following.
Would the following process be 'more correct?'
..1 Not modify the vm.cfg' file.
..2 run ./Deploy_Manager_Template.sh.
..3 In the /OVS/running_pool/ directory find my
vm.cfg file of interest, then modify the vif with a new MAC address.
..4 In /OVS/running_pool/Change my current location to my directory of interest
run xm create vm.cfg (to run my Oracle VM Manager)?
Any help or ideas whould be appreciated.
Thank you very much,
AIM

Hi,
This is the README file for Oracle VM Manager 2.2.0
Readme for Media Pack B57738-01
Print: Access key=P Close: Access key=C
Oracle VM Templates for Oracle VM Manager 2.2.0 Media Pack v1 for x86 (32 bit)
=====================================================================
Template Version 2.3
Oracle VM Manager Version 2.2.0
This document contains:
1. Prerequisites for Oracle VM Manager virtual machine (VM) deployment
2. Oracle VM Manager Template description
3. Creating an Oracle VM Manager Virtual Machine from
Oracle VM Manager Template
4. Deployment Interview
5. Known Issues
For more information on Oracle VM Manager, please refer to
the "Oracle VM Manager Installation Guide" and the "Oracle VM Manager
User's Guide" available at:
http://download.oracle.com/docs/cd/E15458_01/index.htm
1. Prerequisites
================
- A new install of Oracle VM Server 2.2 that has NOT been managed by another
Oracle VM Manager. Manager Template 2.2 is intended to be installed on Oracle
VM 2.2 server. If you have a new Oracle VM 2.1.5 server and want to deploy
Oracle VM Manager template, please use the Oracle VM 2.1.5 Manager template.
Note: root access to the server's dom0 is required.
- It's highly recommended that you upgrade the default agent (ovs-agent-2.3-19)
to ovs-agent-2.3-27 or later. You can get the latest Oracle VM 2.2 packages
from Oracle's Unbreakable Linux Network (http://linux.oracle.com).
Note: Alternate location to get Oracle VM agent 2.3-27 is
http://oss.oracle.com/oraclevm/server/2.2/RPMS/ovs-agent-2.3-27.noarch.rpm
- A working directory of the Oracle VM Server 2.2 has at least 4GB free space
for downloading and installing the template. The working directory can be any
directory on the Oracle VM server except /OVS/running_pool.
Note: The /root partition of the default Oracle VM server install may not have
enough space to temporarily host the template installation. Please use other
directory that has sufficient free space.
- At least 15GB of free space in the cluster root storage repository. For storage
and repository configuration, please refer to Oracle VM 2.2 Server User Guide:
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/storage.htm
and
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/repository.htm
- At least 2GB of free memory on the Oracle VM Server
- A static IP address for the Oracle VM Manager
- If enabling HA (high availability) for the Oracle VM Manager,
mount a clustered OCFS2 or NFS filesystem on /OVS. If ext3 or a
local OCFS2 filesystem is used, enabling HA will cause the high availability
prerequisite checking to fail. The Oracle VM Manager configuration
process will exit without completing the configuration.
- The Oracle VM Manager will register the first VM that it detects.
To have Oracle VM Manager be the first VM registered,
make sure there are no virtual machine images besides the Oracle VM Manager
virtual machine in the /OVS/running_pool directory on the Oracle VM Server.
- A desktop or other system with a VNC Viewer installed
The steps below assume that the Oracle VM Server used is not currently
or was not previously managed by another Oracle VM Manager. If this is not
the case, the instructions below will ask user clean up Oracle VM Agent DB
before running the Oracle VM Manager.
2. Oracle VM Manager Template Description
=========================================
The Oracle VM Manager Template is distributed as one archive file which
includes:
File Version
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz 2.3
Deploy_Manager_Template.sh 2.3
The OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz archive contains two disk images,
a VM configuration file and a readme file:
- Oracle Enterprise Linux 5.3 x86 system disk image
- Oracle VM Manager 2.2 disk image
- vm.cfg
- README
The system image is a JeOS (Just enough OS) installation of Oracle
Enterprise Linux 5.3. It is a smaller footprint install that contains
the only packages needed by Oracle VM Manager.
Oracle VM Manager is configured to use Oracle Database 10g
Express Edition (included).
Deploy_Manager_Template.sh is used to check the prerequisite and
create virtual machine.
During the first boot of the Oracle VM Manager virtual machine,
the Oracle VM Manager configuration process will create server pool
and import the Oracle VM Manager virtual machine.
Two OS user accounts are created by default:
user: root password: ovsroot
user: oracle password: oracle
The user 'oracle' belongs to the 'oinstall' and 'dba' groups.
The default vnc console password is 'oracle'
3. Creating the Oracle VM Manager virtual machine
=================================================
1) Download the Oracle VM Manager Template (V19215-01.zip)
from http://edelivery.oracle.com/oraclevm
2) Login to the Oracle VM Server's dom0 as 'root'
Copy V19215-01.zip to your working directory with at least 4GB free space.
You can choose any directory on OVM Server except /OVS/running_pool.
This zip file contains the archive file OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
and a deploy script Deploy_Manager_Template.sh
3) As root, run
# unzip V19215-01.zip
4) As 'root', run the deployment script:
# chmod 755 Deploy_Manager_Template.sh
# ./Deploy_Manager_Template.sh
The deployment script Deploy_Manager_Template.sh will complete the following
tasks:
a) prerequisite checking
b) uncompress OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz file to directory
/OVS/running_pool. This directory will contain the files following files:
/OVS/running_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM
|- System.img (OS image file)
|- Manager.img (Manager image file)
|- vm.cfg (VM configuration file)
|- README (Readme file)
c) generate and assign new MAC address to the virtual machine
d) interview the user for VM and VM Manager configuration parameters
(next section 'Deployment interview' provides the list of questions)
e) create and boot the virtual machine from the Oracle VM Server
command line
f) display the access information for Oracle VM Manager and Oracle VM
Manager VM
4. Deployment Interview
=======================
The deployment script will prompt a user to enter
a) Agent password
The agent password is required for the prerequisites check.
b) Storage configuration
Storage Source: NFS address, OCFS2 partition path
The script will automatically detect your cluster root storage repository
if you have configured it. Or it prompts users to input their storage source
and the script tries to set it up as cluster root.
NOTE: how to manually create your own storage repository in OracleVM server 2.2.x
1) Register your storage source. Example:
/opt/ovs-agent-2.3/utils/repos.py -n myhost:/mynfslocation
/opt/ovs-agent-2.3/utils/repos.py -n /dev/sdb3
Note that the storage source should have at least 15GB free space.
If the storage source is successfully registered, note down the uuid genereated
by the command above, such as:
51d4c69b-e439-41ac-8b31-3cc485c993b0 => /dev/sdb3
2) Mount your storage repository.
If the agent version is 2.3-27 or higher, execute:
/opt/ovs-agent-2.3/utils/repos.py -i
otherwise, complete the following commands:
[1] mkdir -p /var/ovs/mount/$(echo <uuid> | sed s/-//g | tr '[:lower:]' \
'[:upper:]')"
where '<uuid>' is the uuid noted down in step 2)
[2] mount your storage source to the directory made in step [1].
3) If /OVS exists, delete or move /OVS
mv /OVS "/OVS.$(date '+%Y%m%d-%H%M%S').orig"
create a symbolic link from storage repository to /OVS
ln -nsf /var/ovs/mount/<UUID>/ /OVS
c) Network configuration
Static IP address
Netmask
Default Gateway IP address
DNS Server IP address
Hostname
d) Password for database accounts:
'SYS' and 'SYSTEM' (the same password the same password is used)
'OVS'
'oc4jadmin'
'admin'
e) Web Service configuration (supported in template in version 1.2)
Web Service password (at least 6 characters)
Enable HTTPS or not
f) SMTP server (outgoing mail server SMTP hostname)
E-mail Address for account 'admin'
g) Data for the manager services configuration:
Oracle VM Server Pool Name
Oracle VM Server login user name
Oracle VM Server login password
Note that Oracle VM Manager is critical for managing Oracle VM Server Pools.
Do not pause, suspend or shutdown this virtual machine! Configuring
HA is recommended for this virtual machine so that Oracle VM will
automatically restart the Oracle VM Manager virtual machine if there
is a server crash.
5. Known Issues
===============
1) You may see messages on a virtual machine's console similar to these
when the virtual machine is booting up:
Fatal: No PCI config space access function found
rtc: IRQ 8 is not free.
i8042.c: No controller found.
These messages can be ignored.
2) Mail server check fails.
Bug #7140 in bugzilla.oracle.com
Oracle VM Manager installer only checks the default SMTP port 25 for the
mail server. If the SMTP port is not 25, the check fails, and you will
see the following message:
Mail server '<mail server hostname>' check failed, want to re-enter it(Y|n)?
You can enter 'n' to skip the mail server checking. You will also see the
send mail checking fails with following message:
Failed to send mail to '<Admin e-mail address>'
want to re-enter the e-mail address(Y|n)?
You can enter 'n' to skip the send mail checking.
3) OEL VM console may display error messages similar to those below:
BUG: warning at drivers/xen/fbfront/xenfb.c:143/xenfb_update_screen() (Not
tainted)
Call Trace:
[<ffffffff803aa461>] xenfb_thread+0x135/0x2c5
[<ffffffff8024874b>] try_to_wake_up+0x365/0x376
[<ffffffff8029ba6e>] autoremove_wake_function+0x0/0x2e
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff803aa32c>] xenfb_thread+0x0/0x2c5
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802339c8>] kthread+0xfe/0x132
[<ffffffff80260b24>] child_rip+0xa/0x12
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802338ca>] kthread+0x0/0x132
[<ffffffff80260b1a>] child_rip+0x0/0x12
This will not cause any problems.
4) If you accidentally power off Oracle VM Manager virtual machine through
Oracle Manager UI, and restart the virtual machine from OVM server command
line, although Oracle VM Manager virtual machine is running normally,
the virtual machine status in Manager UI will stay in 'Shutting Down'.
This is expected, as the virtual machine status sync will only happen when
the virtual machine status is "Error" or "Powered Off".
To re-sync the virtual machine status, please complete the following steps:
1. Log on the Manager UI;
2. Navigate to the 'Virtual Machines' tab;
3. Select Oracle VM Manager virtual machine, "OVM_EL5U3_X86_OVM_MANAGER_PVM";
4. Choose 'Reset' from 'More Actions' dropdown list;
5. Click 'Go' button, the status will become "Running" after a while.
5) (Bug 9191053) For OVS agent version 2.3-19, the following High
Availability scenario will not work.
"If a Virtual Machine Server fails, all running virtual machines are
restarted automatically on another available Virtual Machine Server."
For OVS agent 2.3-19, Oracle VM Manager virtual machine will not be
automatically restarted on any other available Virtual Machine Server,
but on the original Virtual Machine Server when it becomes available again.
To fix the issue, please upgrade OVS agent to 2.3-27 or the latest version.

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Oracle VM Manager Instalation issue

I Trying install Oracle VM Manager but suddenly stop, then i try find out in log file but i don't understand, can anyone help me... here is the detail :
Oracle VM Manager Release 3.2.1 Installer
Oracle VM Manager Installer log file:
/tmp/ovm-manager-3-install-2013-06-05-110036.log
Please select an installation type:
1: Simple (includes database if necessary)
2: Custom (using existing Oracle database)
3: Uninstall
4: Help
Select Number (1-4): 1
Starting production with local database installation ...
Verifying installation prerequisites ...
Oracle VM Manager can only be installed on a 64 bit Oracle Linux version 5.5 and higher.
Current version is 'redhat' version '3.2.1'
*** WARNING: Recommended memory for the Oracle VM Manager server installation using Local MySql DB is 7680 MB RAM
One password is used for all users created and used during the installation.
Enter a password for all logins used during the installation:
Enter a password for all logins used during the installation (confirm):
Verifying configuration ...
Start installing the configured components:
1: Continue
2: Abort
Select Number (1-2): 1
Step 1 of 9 : Database Software...
Installing Database Software...
Retrieving MySQL Database 5.5 ...
[root@OracleVM OracleVM-Manager-3.2.1-installer-OracleLinux]#
more ovm-manager-3-install-2013-06-05-110036.log
Traceback (most recent call last):
File "setup.py", line 38, in ?
File "/tmp/ovmm-installer.selfextract_Sg8414/ovm/installer/installer.py", line 274, in install
File "/tmp/ovmm-installer.selfextract_Sg8414/ovm/installer/installer.py", line 500, in installDB
File "/tmp/ovmm-installer.selfextract_Sg8414/ovm/installer/database.py", line 53, in install
File "/tmp/ovmm-installer.selfextract_Sg8414/ovm/installer/database.py", line 324, in installMySQLRPM
UnboundLocalError: local variable 'mysqlfile' referenced before assignment
fs DEBUG path /etc/sysconfig/ovmm is not a file
06-05 11:00 system.fs DEBUG Opened file /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/dbtype for reading
06-05 11:00 system.fs DEBUG Reading file /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/dbtype
06-05 11:00 system.fs DEBUG File /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/dbtype is closed after rea
ding
06-05 11:00 ovm.installer INFO
06-05 11:00 system.console DEBUG Please select an installation type:
06-05 11:00 system.console DEBUG 1: Simple (includes database if necessary)
06-05 11:00 system.console DEBUG 2: Custom (using existing Oracle database)
06-05 11:00 system.console DEBUG 3: Uninstall
06-05 11:00 system.console DEBUG 4: Help
06-05 11:00 system.console DEBUG
06-05 11:01 ovm.installer DEBUG Manager UUID argument set to : 'None'
06-05 11:01 ovm.installer INFO
06-05 11:01 ovm.installer INFO Starting production with local database installation ...
06-05 11:01 ovm.installer.prerequisites INFO
06-05 11:01 ovm.installer.prerequisites INFO Verifying installation prerequisites ...
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if run by root user
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if OS is Oracle Linux or Solaris
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if OS is at least Oracle Linux version 5.5
06-05 11:01 ovm.installer.prerequisites INFO Oracle VM Manager can only be installed on a 64 bit Oracle Linux version 5.5 and
higher.
Current version is 'redhat' version '3.2.1'
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if hostname is pingable
06-05 11:01 system.net DEBUG pingMachine OracleVM, timeout=5, recheck=False
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 0
06-05 11:01 system.process DEBUG system.process.run stdout:
PING OracleVM.anggia.com (192.168.56.3) 56(84) bytes of data.
64 bytes from OracleVM.anggia.com (192.168.56.3): icmp_seq=1 ttl=64 time=0.073 ms
--- OracleVM.anggia.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.073/0.073/0.073/0.000 ms
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 system.net DEBUG Machine with ip:[OracleVM] is pingable
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if system has enough memory
06-05 11:01 system.fs DEBUG Opened file /proc/meminfo for reading
06-05 11:01 system.fs DEBUG Reading file /proc/meminfo
06-05 11:01 system.fs DEBUG File /proc/meminfo is closed after reading
06-05 11:01 system.fs DEBUG Opened file /proc/cpuinfo for reading
06-05 11:01 system.fs DEBUG Reading file /proc/cpuinfo
06-05 11:01 system.fs DEBUG File /proc/cpuinfo is closed after reading
06-05 11:01 ovm.installer.prerequisites WARNING *** WARNING: Recommended memory for the Oracle VM Manager server installation us
ing Local MySql DB is 7680 MB RAM
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if the permission of /tmp is 777
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if the 'oracle' user and group exist
06-05 11:01 ovm.installer.prerequisites DEBUG * Verifying hardnofiles for user 'oracle'
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 0
06-05 11:01 system.process DEBUG system.process.run stdout:
open files (-n) 8192
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 ovm.installer.prerequisites DEBUG * Verifying softnofiles for user 'oracle'
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 0
06-05 11:01 system.process DEBUG system.process.run stdout:
open files (-n) 8192
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 ovm.installer.prerequisites DEBUG * Verifying /u01
06-05 11:01 ovm.installer.prerequisites DEBUG Changing /u01 permission to 755
06-05 11:01 system.fs DEBUG path [u01/app] is not a directory
06-05 11:01 system.fs DEBUG path [u01/app/oracle] is not a directory
06-05 11:01 ovm.installer.prerequisites DEBUG * Verifying Install Env
06-05 11:01 system.fs DEBUG path /u01/app/oracle/Middleware/.installed does not exist
06-05 11:01 system.fs DEBUG path /u01/app/oracle/java/.installed does not exist
06-05 11:01 system.fs DEBUG path /u01/app/oracle/ovm-manager-3/.installed does not exist
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:01 system.process DEBUG system.process.run stdout:
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 system.process DEBUG Checking whether a service is running on port 49500
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:01 system.process DEBUG system.process.run stdout:
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 ovm.installer.questions INFO
06-05 11:01 ovm.installer.questions INFO One password is used for all users created and used during the installation.
06-05 11:01 system.fs DEBUG Opened file /tmp/ovm_configBbY8PB for writing
06-05 11:01 system.fs DEBUG Writing contents in file /tmp/ovm_configBbY8PB
06-05 11:01 ovm.installer DEBUG Reading configuration about installers in '/source/OracleVM-Manager-3.2.1-installer-OracleLinu
x/components/files.yml'
06-05 11:01 system.fs DEBUG Opened file /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/files.yml for readi
ng
06-05 11:01 system.fs DEBUG Reading file /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/files.yml
06-05 11:01 system.fs DEBUG File /source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/files.yml is closed after
reading
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/ofm_appdev_generic_11.1
.1.5.0_disk1_1of1.zip' as installation file for Oracle ADF
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/ovm_upgrade_3.2.1.516.z
ip' as installation file for Oracle VM Manager Upgrade tool
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/wls1035_generic.jar' as
installation file for Oracle WebLogic Server
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/weblogic_3.2.1.516.zip'
as installation file for Oracle VM core & console
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/ovm_cli_3.2.1.516.zip'
as installation file for Oracle VM Manager CLI tool
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/ovm_shell_3.2.1.516.zip
' as installation file for Oracle VM Manager Shell & API
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/OEL6_p14405782_55_Linux
-x86-64.zip' as installation file for Database
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/OEL5_p14405786_55_Linux
-x86-64.zip' as installation file for Database
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/MEB_OEL6_meb-3.8.0-el6.
x86_64.rpm' as installation file for Database
06-05 11:01 ovm.installer DEBUG Using '/source/OracleVM-Manager-3.2.1-installer-OracleLinux/components/MEB_OEL5_meb-3.8.0-rhel
5.x86_64.rpm' as installation file for Database
06-05 11:01 system.fs DEBUG path /u01/app/oracle/java does not exist
06-05 11:01 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_Sg8414', 'java')
06-05 11:01 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_Sg8414', 'ovm', 'installer', 'djc', 'lib', 'java')
06-05 11:01 ovm.installer.prerequisites INFO
06-05 11:01 ovm.installer.prerequisites INFO Verifying configuration ...
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if enough diskspace is available
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if database port is available
06-05 11:01 system.process DEBUG Checking whether a service is running on port 49500
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:01 system.process DEBUG system.process.run stdout:
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if database server hostname 'localhost' is pingable
06-05 11:01 system.net DEBUG pingMachine localhost, timeout=60, recheck=False
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 0
06-05 11:01 system.process DEBUG system.process.run stdout:
PING localhost.localdomain (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.096 ms
--- localhost.localdomain ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.096/0.096/0.096/0.000 ms
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 system.net DEBUG Machine with ip:[localhost] is pingable
06-05 11:01 ovm.installer.prerequisites DEBUG * Checking if Oracle VM ports are available
06-05 11:01 system.process DEBUG Checking whether a service is running on port 54321
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:01 system.process DEBUG system.process.run stdout:
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 system.process DEBUG Checking whether a service is running on port 7002
06-05 11:01 system.process DEBUG system.process.start
06-05 11:01 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:01 system.process DEBUG system.process.run stdout:
06-05 11:01 system.process DEBUG system.process.run stderr:
06-05 11:01 ovm.installer INFO
06-05 11:01 system.console DEBUG Start installing the configured components:
06-05 11:01 system.console DEBUG 1: Continue
06-05 11:01 system.console DEBUG 2: Abort
06-05 11:01 system.console DEBUG
06-05 11:02 system.unix DEBUG Chown oracle:dba /tmp/ovm19GZ7h
06-05 11:02 ovm.installer INFO
06-05 11:02 ovm.installer INFO Step 1 of 9 : Database Software...
06-05 11:02 ovm.installer INFO Installing Database Software...
06-05 11:02 system.fs DEBUG path /u01/app/oracle/java does not exist
06-05 11:02 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_Sg8414', 'java')
06-05 11:02 system.fs DEBUG Creating directory if not exists /u01/app
06-05 11:02 system.fs DEBUG path [u01/app] is not a directory
06-05 11:02 system.fs DEBUG Created the directory [u01/app]
06-05 11:02 system.unix DEBUG Chmod /u01/app
06-05 11:02 system.fs DEBUG isfile:/u01/app
06-05 11:02 system.fs DEBUG path /u01/app is not a file
06-05 11:02 system.fs DEBUG Scanning directory (walk) /u01/app
06-05 11:02 system.fs DEBUG Creating directory if not exists /u01/app/oracle
06-05 11:02 system.fs DEBUG path [u01/app/oracle] is not a directory
06-05 11:02 system.fs DEBUG Created the directory [u01/app/oracle]
06-05 11:02 system.unix DEBUG Chmod /u01/app/oracle
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle
06-05 11:02 system.fs DEBUG path /u01/app/oracle is not a file
06-05 11:02 system.fs DEBUG Scanning directory (walk) /u01/app/oracle
06-05 11:02 system.fs DEBUG Creating directory if not exists /u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG path [u01/app/oracle/mysql] is not a directory
06-05 11:02 system.fs DEBUG Created the directory [u01/app/oracle/mysql]
06-05 11:02 system.unix DEBUG Chmod /u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql is not a file
06-05 11:02 system.fs DEBUG Scanning directory (walk) /u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG Creating directory if not exists /u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG path [u01/app/oracle/mysql/data] is not a directory
06-05 11:02 system.fs DEBUG Created the directory [u01/app/oracle/mysql/data]
06-05 11:02 system.unix DEBUG Chmod /u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/data is not a file
06-05 11:02 system.fs DEBUG Scanning directory (walk) /u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG Creating directory if not exists /u01/app/oracle/mysql/dbbackup
06-05 11:02 system.fs DEBUG path [u01/app/oracle/mysql/dbbackup] is not a directory
06-05 11:02 system.fs DEBUG Created the directory [u01/app/oracle/mysql/dbbackup]
06-05 11:02 system.unix DEBUG Chmod /u01/app/oracle/mysql/dbbackup
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql/dbbackup
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/dbbackup is not a file
06-05 11:02 system.fs DEBUG Scanning directory (walk) /u01/app/oracle/mysql/dbbackup
06-05 11:02 system.unix DEBUG Chown oracle:dba /u01/app
06-05 11:02 system.fs DEBUG Scanning directory (walk)/u01/app
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle
06-05 11:02 system.fs DEBUG path /u01/app/oracle is not a file
06-05 11:02 system.fs DEBUG path /u01/app/oracle is not a link
06-05 11:02 system.fs DEBUG Scanning directory (walk)/u01/app/oracle
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql is not a file
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql is not a link
06-05 11:02 system.fs DEBUG Scanning directory (walk)/u01/app/oracle/mysql
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/data is not a file
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/data is not a link
06-05 11:02 system.fs DEBUG Scanning directory (walk)/u01/app/oracle/mysql/data
06-05 11:02 system.fs DEBUG isfile:/u01/app/oracle/mysql/dbbackup
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/dbbackup is not a file
06-05 11:02 system.fs DEBUG path /u01/app/oracle/mysql/dbbackup is not a link
06-05 11:02 system.fs DEBUG Scanning directory (walk)/u01/app/oracle/mysql/dbbackup
06-05 11:02 system.process DEBUG system.process.start
06-05 11:02 system.process DEBUG system.process.run ended, exitcode was 1
06-05 11:02 system.process DEBUG system.process.run stdout:
06-05 11:02 system.process DEBUG system.process.run stderr:
06-05 11:02 ovm.installer.database INFO Retrieving MySQL Database 5.5 ...
06-05 11:02 system.fs DEBUG Removing directory tree with path: /tmp/ovm19GZ7h
06-05 11:02 system.fs DEBUG path /tmp/ovm19GZ7h exists
06-05 11:02 system.fs DEBUG Trying to remove Directory tree with path: /tmp/ovm19GZ7h (warn on errors)
06-05 11:02 system.fs DEBUG Directory tree with path: /tmp/ovm19GZ7h is successfully removed
06-05 11:02 system.fs DEBUG Removing directory tree with path: /tmp/ovmm-installer.selfextract_Sg8414
06-05 11:02 system.fs DEBUG path /tmp/ovmm-installer.selfextract_Sg8414 exists
06-05 11:02 system.fs DEBUG Trying to remove Directory tree with path: /tmp/ovmm-installer.selfextract_Sg8414 (warn on erro
rs)

Hi!,
Modify the version release file /etc/redhat-release
put the line
Red Hat Enterprise Linux Server release 5 (Tikanga)
save file, them delete directories /u01/app/oracle/* and /tmp/* and try again
I hope help you.
Carlos G.

Oracle Services & Management Server

Similar Messages

Maybe you are looking for