Oracle Services Procurement is not enabled

Hi,
in 11.5.10 on Linux, a user receive the following :
Oracle Services Procurement is not enabledWhere and How to enable it ?
Thanks.

thank you Ahmed.
It is for 11i.
I run the
and in report I have :
ap 11i.AP.M(3151444) 11i.AP.M(3151444) 11i.AP.O(4551936)
Does-it mean that our Oracle Accounts Payable is Family Pack M ?
And that note is applied to 11.5.i
Error: You Cannot Access This Page Because Oracle Services Procurement Is Not Enabled After Select The 'Contractor Request' TAB [ID 295455.1]
Modified 18-NOV-2008 Type PROBLEM Status PUBLISHED
Applies To
iProcurement - Version: 11.5.10
This problem can occur on any platform
Confirm the following conditions are met:
1. PO: Enable Services Procurement should be set to Yes .
If No, set it to Yes and bounce the Apache server .
2.Ensure the instance has the following patch configuration:
a) Oracle Accounts Payable is Family Pack M higher
b) or Finance F
c) or Oracle Accounts Payable is not installed
Thank you.

Similar Messages

Oracle service and listener not starting

In my oracle 10.1.0.2.0 on windows Xp server today I found all the oracle services are stopped and when I try to start the listener it gives me the following error..
C:\>lsnrctl
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 15-JUL-2008 11:16
:02
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=suman)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
LSNRCTL> start
Starting tnslsnr: please wait...
Failed to start service, error 3.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 3: No such process
LSNRCTL>
I have set the oracle_home and oracle_sid also no difference. I tried to start from windows service window it gives me error 3: can not find the path specified.
I have re-created the listener and net configuration but still no improvement.
Any advice from you please?
Regards
Suman

do you any other version of oracle installed in your system...
the conflict will be beause of that...
u need to set environment variable for oracle_home as your 10g database... then restart the system...
then set oracle_sid
it should work

Oracle Service Bus Debugger: stepping an inexisting frame

Hi,
We are frequently getting below alert on production. The messages are not failing beucase of this. Does anybody face this error before? ..... not able to reproduce this on our test environment.
<BEA-382004> <Failed to process request message for service ProxyService XXX_proxy: java.lang.IllegalStateException: Oracle Service Bus Debugger: stepping an inexisting frame.
java.lang.IllegalStateException: Oracle Service Bus Debugger: stepping an inexisting frame. at com.bea.alsb.debug.internal.server.model.ThreadStateManager.sanitize(ThreadStateManager.java:313)
at com.bea.alsb.debug.internal.server.model.ThreadStateManager.stepped(ThreadStateManager.java:281)
at com.bea.wli.sb.pipeline.debug.DebuggerTracingStep.traceExit(DebuggerTracingStep.java:146)
at com.bea.wli.sb.pipeline.PipelineContextImpl.exitComponent(PipelineContextImpl.java:1063)
at com.bea.wli.sb.pipeline.PipelineContextImpl.handleError(PipelineContextImpl.java:975)
Truncated. see log file for complete stacktrace
Thanks,
B

funny, because:
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/eclipsehelp/tasks.html#taskDebugger
Enabling Debugging
Oracle Service Bus debugging is enabled automatically on a server running in development mode. When you create a new domain, the following entries are included in the <domain>/bin/setDomainEnv script:
set ALSB_DEBUG_FLAG=true
set ALSB_DEBUG_PORT=7453
If you want to turn Oracle Service Bus debugging functionality off, set ALSB_DEBUG_FLAG=false.
If you start the server in production mode, Oracle Service Bus debugging is automatically disabled.
Are you definitely sure that debugging is disabled in your environment?

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

How to get "Oracle Services for MTS" working?

I've implemented the microsoft code example (see at the bottom) for the use of distributed transactions (with system.transactions and MTS support). The code works fine as long as I use only MS sqlserver.
Well, I tried one connection to an oracle database and one connection to the sqlserver - and here the trouble starts ;-)
Oracle doesn't care about the transaction. After the command is executed the changes are made to the oracle database at once (no commit has occured at that point) even if the second command isn't successfull.
I suppose at the moment that the problem must be something around the interaction between MTS and oracle database, more precisly the oracle Services for MTS.
I've installed the odp.net client (ODAC1020221.exe).
The installer tells me that oracle data access components 10.2.0.2.21 and within the Oracle Services for MTS are installed.
But I cannot find a service with that name in the service list, OracleMTSRecoveryService is listed, but I'm not sure if that's the right one.
So here are my questions:
What's the name for 'Oracle Services for MTS' in the services list?
Do I have to install more than the odp.net client to get the MTS support running?
Is there a mistake in the code I'm running?
any help is welcome ...
thanx in advance!!!
And here's the code I'm working with:
[Transaction(TransactionOption.RequiresNew)]
public class Worker : ServicedComponent
[AutoComplete]
public void Test()
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.RequiresNew, new TimeSpan(0, 5, 0)))
DbProviderFactory theFactory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client");
using (DbConnection connection1 = theFactory.CreateConnection())
try
connection1.ConnectionString = ".........";
connection1.Open();
DbCommand command1 = theFactory.CreateCommand();
command1.Connection = connection1;
command1.CommandText = "Insert into user (name, surname,benoid) values ('hans','wurst','32315134512345')";
object returnValue = command1.ExecuteNonQuery();
using (SqlConnection connection2 = new SqlConnection("Data Source=localhost;Database=UserManagement;Trusted_Connection=true;"))
try
connection2.Open();
//this command fails
SqlCommand command2 = new SqlCommand("Insert into uuuu (name, vorname) values ('hans','wurst')", connection2);
object retValue = command2.ExecuteNonQuery();
catch (Exception ex)
return;
catch (Exception ex)
return;
scope.Complete();
}

hey what's up you figured out your problem with M$DTC/Oracle 11i with ODP.NET trying to do a TransactionScope?
I saw your problem - and I ran into the same.
Re: 10g Express + ODP.NET (version 2.111.6.20) > support TransactionScope?
Trying to install "Oracle Services for MTS" not sure how but working on it now. Doc looks old however,
http://www.oracle.com/technology/tech/windows/ora_mts/index.html
Did you get pass this already?

Application Integration Architecture Foundation Pack on Oracle Service Bus

The paper on the Oracle web site from December 2008 titled "Application Integration Architecture Foundation Pack on Oracle Service Bus" is an interesting read. The technology roadmap makes it clear the OSB is the future and current "old" ESB supported by AIA is going on the scrap heap. Now I know the OSB is not a supported platform for even the latest foundation pack so I wonder about why this paper was published. Is Oracle indicating foundation pack v 2.2.x support on OSB? Is it published as a "this is something to look forward to" type document? I honestly wonder since there are some pretty specific instructions on how to get it working and the authors are senior thought leaders for the AIA product.
RICH
2/04/08 Update - I see that with the AIA 2.3 release that Oracle Service Bus did not make the list of supported technology.
Edited by: Rich Naszcyniec on Feb 4, 2009 12:38 PM

Check out this link :
http://steffensinsights.blogspot.com/2012/03/osb-access-to-salesforcecom-part-1.html
in detail info on how you can connect to salesforce alongwith the code sample

Difference between std procurement and service procurement & advantages?

Dear Gurus,
what are the differences between standard procurement and service procurement &
advantages of External services management?
Thanks...

hi,
In std procurement we procure materials while in the service procurement we procure services...sap has given these two differently may be bacause while procuring the services you never know in advance that how much exact amount is req. just because you don't know for eg wether there is any req. of changing the parts, or general maintenence or anything else...
so due to this you use the value limits....
Advantage: As the services procured are not FIXED as in the std procurement, we do have flexibility for adding up the new services as per the req...
and as we provide the value limits, in the real time scenerio it doesnot cause any FI problem later...
Regards
Priyanka.P

Enhancement package for service procurement Log-MM-P2PSE- not available

Dear Experts,
'Enable enhancement package for service procurement' - Log_MM_P2PSE_1 - Procurement - SRM Integration is available for activation from MM system (ECC 6.0 Enhapk 4.) for activation of the service procurement classic scenario.
However, I have downloaded a new installation (ECC 6.0 Enhancement pk 4) from service market place. The package is not available here. Why?
Do we need to install it do something extra?
Regards,
Ranjan

Hello Nathalie,
If you look at the SRM-MDM Catalog scenarios described in the following page, it seems that you don't need SRM for some of them. :
http://help.sap.com/saphelp_srm70/helpdata/en/45/ddd04f8c6e2e97e10000000a155369/content.htm
This is my understanding. But if someone has tries it out it would be nice to hear about it.
CLM.

Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Oracle Services are not removed from system (10g, on Windows 2003)

Hi,
I haven't used Oracle on Windows Os before and not sure what to do.
Here is what happened
1- I installed 10g on windows 2003 server, created a database with service name OPER
2- I was unhappy with the installation and removed it.
3- then I installed Oracle 10g software again, creating a database again which has name IZROPER
now, there are two of every oracle service in the services.msci
service names containing the first db's (OPER) are still showing up in services, how can I remove them?
ORACLEDBCONSOLEoper
OracleJobSchedulerOper
OracleServiceOper
etc..

start -- run -- > regedit
In regedit mode --> HKLM -> SYSTEM -- currentcontrol set --> services --> here Oracle services are avilable , you can delete from here.

Generic Object Services not enabled in MB23 Material Reservation

Hi all,
The Generic Object Services Toolbox is not available in SAP MM transaction MB23 used for accessing Material Reservations. SAP version is 4.7/620.
As its a standard SAP transaction referring to standard business object type BUS2093, so I was expecting that the Object Services will be enabled for this.
Kindly help as to how I can configure the display of Object Services toolbox in this transaction to link attachments. (If its regarding changing some code like including cl_gos_manager or SWU_OBJECT_PUBLISH, then kindly explain in detail.
With Regards
Neha

Thanks Deepak,
But I thought the described methdology in the PDF pointed by the URL is for how to do it for any custom business object type, will it be useful for the SAP standard business object as well like BUS2093. When I try to edit an already created SAP object, it starts asking for an access key.
With Regards
Neha

Icq on Blackberry "Service not enabled for this handheld"

Every time I try to login to icq on my blackberry it gives me an error that says "Service not enabled for this handheld". I called Sprint whom my service is through and they told me that everything is enabled for messaging programs on my account. Does anyone know how I can get this working? My blackberry is an 8830 world edition.
Message Edited by harley9 on 03-03-2009 03:31 PM

Reminder to remain courteous and on topic. Thanks

PAY IN FULL check box is not enabled in oracle payables

Hi,
In Payables -> Invoice -> Invoices screen,
when i'm entering invoices, in Actions Button..1, <strong>PAY IN FULL</strong> check box is not enabled in oracle payables. How to enable that to receive payment.?
Thanks & Regards

1.As suggested previously Try validating the invoice and complete any Workflow approvals if any.
2.If its not available the function might not be available for your responsibility. You will have to run a batch or go to a resp having access to this function.
Thanks

Partition option not enabled feature in oracle 10g

Hi,
I have installed Oracle 10g on Linux 32 bit.
But when I am adding a table with Paritiion its showing Partition not enabled.
How to enable the Partitioning option without dropping the database.
Kindly any help will be needful for me

Hi,
Means I dont have to drop the existing database?
If I do Custom installation to Add Partitiong option under which meanu Partition option will fall?
Do i need to perform the following steps:
If it is not enabled in the database then :
- Shutdown all databases that use this ORACLE_HOME
- Run the following
$ cd $ORACLE_HOME/rdbms/lib
$ make -f ins_rdbms.mk part_on
$ make -f ins_rdbms.mk ioracle
- Startup the database and check the value for partitioning option in the
v$option view, it should be TRUE now

Oracle Services Procurement is not enabled

Similar Messages

Maybe you are looking for