Oracle services won't start

I'm using Windows 2000 Professional and when I go to services, I can't start any of the ORACLE services. I get an error 5 message from Windows.

Hi
The best way for you is that you first format your harddisk and then install Windows 2000 again, and finally install a fresh Oracle.
null

Similar Messages

Oracle Home Agent service won't start

OracleOraHome90Agent service won't start on Win XP Home Edition. Was working fine. Installed Sun Webserver 6.1 and started facing problems. So uninstalled webserver and even then the Oracle Home Agent service starts and stop immediately. the oracle database service and the listener starts without any issues. Any help appreciated.

XP Home Edition is not certified for Oracle9i Database but according to the information given by you, that service was functioning well. Perhaps the new software that you installed is consuming a lot of resources regarding the virtual memory of the machine and maybe for that the services is not starting.
I recommend you to increase the virtual memory of your machine and try again.
Joel Pèrez
http://otn.oracle.com/experts

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

Oracle Services Does Not Start

Hi,
I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
Could anyone pls let me know the order in which the oracle services should start.
im sorry if my question confused you, bc'so im confused and stuck
Thanking u in advance
regards
Muraly

Hi,
you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
Atul

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

Urgent --oracle service is not starting

hi everyone,
in my server one of oracle service is not starting.
"oracleorahome81httpserver" if i try to start this service its telling that " error 1067, the process terminated unexpectedly.
i checked in cmd prompt, by r3trans -d. its telling " error <0012>
.i need the command for mounting the database.
its urgent...,
regards
gopi

hi
good
go through this link,hope this would help you to solve your problem
http://orafaq.com/usenet/comp.databases.oracle.server/2004/09/22/1495.htm
thanks
mrutyun^

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

Can't Update to 10.0.1, Bonjour Service Won't Start--PLEASE help!

All I want to do is update my iTunes but I cannot. It won't work from within iTunes, and when I try to do it manually it said "The Service Bonjour Service" won't start." In Services, I could not start it either, though I am admin.
So I deleted Bonjour (from within the Control Panel), thinking that'd take care of it, but it did not. I still get ALL the same messages. I even tried re-installing Bonjour (bonjour64.msi), and I get the same "won't start" message. It's not my firewall--I set that to always allow.
What is going on here? I've searched and searched, but to no avail (though they are plenty of Bonjour problems out there), and I really don't want to uninstall/reinstall iTunes, if that would even do it. I'm new to Apple, and this just makes no sense to me.
Please, help?? THANKS in advance~

There are remants of Bonjour in the program files, and I guess I could delete these to clean it up, but I doubt that would make the difference.
Actually, that could make a difference. If there is leftover componentry from the previous version still on the PC when the new version tries to install, the version mismatch could cause trouble with the new service starting. That could then roll back the attempted install.
There's a bunch of different stuff on 64-bit systems for BonJour (there's both 64-bit and 32-bit componentry stashed on a 64-bit system. We'll also try a cleaner version of an uninstall than the Apple instructions provide.
In Computer, open your C drive (or whichever drive your program files are installed on).
Open the "Program Files" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your program files are installed on).
Open the "Program Files (x86)" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Go back into the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Empty your recycle bin.
Restart the PC and try another BonJour install. Any better luck restarting the service this time?

Oracle Lite service won't start

Hi,
I need help starting the oracle BPEL process manager.
I have installed the oracle BPEL process manager but it seems that it won't start because the Oracle Lite service cannot start.
When running C:\OraBPELPM\bin>olsv2040.exe /debug in a command prompt, I get the following error:
Debugging Oracle Lite Multiuser Service.
Service start failed, please check your environment
For more information enable service trace
Do you have any ideas how I can make the Oracle Lite service to work?
Presumably that will also make the Process Manager to start.
Thanks!

Hi again,
the port 1521 is free.
I have installed Oracle BPEL Process Manager 10.1.2 on Win2K (BEA WLS).
I also installed Oracle Lite as a Windows service.
When I try to start it as a service through a command prompt, I get the below error:
The Oracle Lite Multiuser Service service could not be started.
A service specific error occurred: 4294966385.
When I try to start it from the Windows Services system tool, I get the error:
Service specific error -911
I have also checked all ini files in the Windows directory and they look correct.
Any idea what could be the problem???
Cheers,
Akis

Agent service won't start on Windows server

Having bounced the Windows 2003 server (64 bit) the instance and listener started up automatically as set in the "services" but the Agent (which WAS running fine)would not start automatically so I tried to manuall start it in the services...a pop up message states it could not start service and to look in event log for details...
find this in event log:
The description for Event ID ( 4 ) in Source ( Oracleagent10gAgent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 03/13/08 13:52:14 agent exited with retCode 55..
find this in the agent.trc:
2008-03-13 10:49:45 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03135: connection lost contact
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03114: not connected to ORACLE
2008-03-13 10:49:46 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
2008-03-13 10:50:01 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
SQL = " OCIServerAttach"...
LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
2008-03-13 10:50:01 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
Any ideas? Is there something simple to do or should I try re-install the agent?

Man, I just love to ask questions then answer them myself:-)
The reason for all this was the recent change to daylight savings time here!
The agent (10.2.0.2) will keep running just fine until the server is bounced then it won't start until you apply patch (5884103)...thanks Mike at Metalink!

Error 1069 - Server Service won't start

I'm getting the following erro message when I try to start Central Pro Server:
Could not start the Adobe Central Output Server Service on local computer.
Error 1069 The Service did not start due to logon failure.
I checked the services and it won't allow me to start this manually... any suggestions would be greatly appreciated!

From the text error as well as the inability to manually start the server I'd suspect that the user-id or password defined on the Log On tab is incorrect. If you are on a Windows network don't forget that if you are using a Domain user-id that the domain name has to be included (DOMAIN\user-id).

TNS Listener Service won't start after upgrading server from NT to 2000

I am new to Oracle and have worked my way through downloading and installing Oracle Enterprise Edition on an NT 4.0 SP6a server and I believe the installation was successful--I was able to run the Oracle Enterprise Manager successfully and I browsed the Oracle services in NT and they all appeared to be working.
I upgraded NT to Windows 2000 Server and Service Pack 2 yesterday and after that I am unable to run Oracle Enterprise Manager and have noticed that the TNS Listener will not start. Actually it starts and immediately stops. It does not cause any messages in the Event Viewer.
Any help on how to proceed would be very gratefully received.
I am a database administrator with a school district and are evaluating/comparing Oracle vs. SQL Server 2000 for creating a data warehouse.
Thanks!

Srinivasa and Allen,
Thank you very much for your replies. I tried the lsnrctl show connect_timeout command and got a message that connect_timeout was an invalid parameter. Is that true of 9i? However, I used the help show command and tried some of the other parameters and the error messages said something about not being able to locate the host. At that point I recalled that at the same time I was upgrading the server to Windows 2000 I also changed the name of the server from MISNT to just MIS.
At that point I renamed the server back to MISNT and after rebooting, the TNS listener works fine. I do want to change the server name back to MIS. It appears there is a configuration file somewhere that has the host name in it that I will need to change. It makes me wonder if there are any other places where I am going to need to change this before I'm done. Will I be better off to just completely uninstall Oracle, change the server name and then reinstall?
Thanks!
Rick

Oracle services won't start

Similar Messages

Maybe you are looking for