Oracle Software not installed

Hi!
I tried to install SAP NetWeaver 7.1 with Oracle 10 under Windows Server 2003 64bit in english fully updated. But I ran into two problems which prevented the SAP installation to finish : first once all the oracles updates were installed, the oracle wintows service would not start; second sapinst never managed to find the oracle installation and always answered "Oracle Software not installed".
For this installation I downloaded all the installation files from the SAP download center like this :
     - On http://service.sap.com/swdc in the left frame : download/installation and upgrades/entry by application group
     - then in the center frame : SAP NetWeaver/SAP NetWeaver/SAP NETWEAVER CE 7.1/Installation/Windows Server/Oracle/
     - I added everything to the Download basket but "Oracle 10.2.0.2.0 Patch for AIX 64bit" and "Oracle 10.2.0.2.0 Patch for Solaris 64bit"
- then I took the last patch for Oracle 10 on the SAP download center :
     - on http://service.sap.com/swcenter-3pmain in the left frame : Oracle/Oracle 64-bit/Oracle 10.2.0 64bit/Oracle 10.2.0.2/NT_x86_64
     - I added the last patch to the download basket
Then I followed this installation steps :
installation of the last jdk : jdk-6u3-windows-i586-p.exe
installation of Oracle 10.2.0.1 with : Oracle10.2.0.1-51031678\NT\I386\sapserver.cmd
installation of the last update for oracle 10.2.0.2 with : DVD_ORACLE_10.2.0.2_Patches_WIN_AIX_SOL\NT\I386\setup.exe
     => I had a problem with the installation of the patch chich detected the wrong version of windows so I forced it with : OPATCH_PLATFORM_ID=233 (I checked it before, it should really be the right one)
installation of the last patch of oracle :
     - definition of ORACLE_HOME and addition of opatch to the PATH
     - execution of "opatch apply" in the folder Oracle-10202_Patch16_MSWINX86-64-6397030\
===> *PB* : the installation of this patch enables the oracle windows service which won't run and doesn't send any errors (just timeout). I didn't find any help on this one. When I tried to start sqlplus in console, I got errors about DLLs not found but they exists in the bin directory of oracle and are in the PATH...
installation of NetWeaver 7.1 with SAP NetWeaver CE 7.1 SP3 for Oracle - 51032969\DATA_UNITS\CE71_03_IM_WIN_X86_64_ORA\sapinst.exe
       - normal installation + JavaEE + CompEnv
          - Media Browser - RDBMS Client Oracle : Oracle 10.2 Client - 51033272\OCL_WINDOWS_I386\LABEL.ASC
===> *PB* : at this point of the sap installation, I got an error "Oracle Software not installed" without any details. I didn't find any help on that either. It seems to come from a registry key missing...
After that, I uninstalled (with removal of the right keys in the registry to have something clean (<a href="http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm">url</a>)) Oracle many times and tried different installation steps : without the patches, with the patches but without the update (doesn't work), with the patch 15, with the patch 16. In each cases Oracle service wasn't working if a patch was installed. And in each cases the sap installation never detected an Oracle installation. This installation steps are very reproductibles and are problemful.
Could anybody have some pointers or help on that one ?
Thanks in advance,
Florian

Hello Friends,
I tried the AMD64 based Installation Source to install Oracle 10g. and It works.
I also applied sufficient patches (AMD64/x86_64 based) to Oracle, as required. It worked fine, without giving that "Platform not compatible" error, as it was giving me before.
Now,I have got that , my machine was expecting x86_64 based Installation of Oracle .
I was little bit confused between x86, x64, x84_64, I386,etc..etc..terms...
Thanks to Markus and other friends.
The problem was due to mix installation of 32bit +  64bit Oracle Software & Patches. Previously, i installed  i386 based Oracle, which is 32 bit version. Then i tried AMD64 based Installation source of Oracle RDBMS. It workes.
Previously, I was applying x86_64 based Oracle patches 16 & 17 on 32-bit Oracle version, thats why definitely it was giving error of "Platform not compatible", because it was expecting 64Bit Oracle version to implement that patch.
But, now, i successfully applied these two required Oracle 10.0.2.0 patches(16 & 17),on this 64Bit Oracle. (AMD64 based Installation source).
Then, I had run SAPInst of Installation Master (Win_x86_64) and started the Installation again. I also gave Oracle RDBMS Client Source location (x86_64 based). Then, also provided other required parameters. Now, the SAPInst worked fine, without that "Oracle Software not Installed" error.
And, Ultimately I successfully installed the SAP NetWeaver CE 7.1 on 64Bit Oracle 10g Database Software. Right now, the Server is working fine, without Errors.
Thanks Again.....

Similar Messages

  • Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit  version of itunes - Pls Help

    I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
    "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit  version of itunes".
    i already installed 64bit version. but not connecting my iphone with itunes
    PLEASE HELP.!!!!
    <Personal Information Edited by Host>

    Hello Negaz
    When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • WAE 674 Disk based software not installed.

    Hi,
    Have an WAE 674 with 4.4.3c installed, with problem.
    Using WCCP and I am able to logon to the device.
    Have this msg and in in the CM it is down.
    System Initialization Finished.
    Disk based software not installed.
    Some applications may not run correctly!
    Any sugestion?
    I have reload still problem.
    Regards Jan Rockstedt

    What steps did you take to resolve the issue? I have the same issue on WAVE 594 running 4.4.5.
    I get the error message when I telnet into device.

  • Software not installed correctly to communicate with ipod/iphone. This message appears when itunes is opened

    software not installed correctly to communicate with ipod/iphone. please install again

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Software not installed correctly to communicate with ipod -Tryed evrything

    Hello i am geting the "Software not installed correctly to communicate with ipod" error. I tryed everything on http://docs.info.apple.com/article.html?artnum=93716 nothing worked. I need help for a fix. I was having error 2095 before then i fixed it. Now im having this problem
    Ipod: 30 gig video
    Computer: HP a1112n

    Itunes ver: 6.0.2.23
    that rules out one set of possibilities.
    okay, we'd better check on the following two possibilities then. (the second one has shown up in itunes 6.0.0.18, 6.0.1.3 and 6.0.4.2, so it's a live possibility with a 6.0.2.23.)
    The Tick 247: iTunes not recognizing your nano? Here's a possible solution!
    markinmadison: Re: "The software required for communicating with the iPod is not installed..."
    love, b

  • Ipod software not installed itunes

    when i run itunes i get the error message software not installed...
    I can't seem to find the answer to this problem however i remember two posts that solved it
    one told how to remove tunes thuroughly
    the other used Start..Run to close a few things that itunes and the ipod used.
    I need an answer and am onedering if anybody could find one of these two posts or give me an answer of their own

    Its ok i found it

  • Oracle 10g not installing successfully in Windows Vista.

    Dear Gurus,
    Last week I bought a HP Pavlion Laptop with Windows Vista Operating System. Yesterday I tried to install Oracle 10g Database in it but got some errors during the installation and also it is not successfully installed. Even though there is no problem with the Software.
    Please tell me whether Oracle 10g is supported in Windows Vista. If not what is the version of Oracle should I install. I urgently need Oracle Database to be installed in my Laptop, please suggest what can be done.
    Thank you.
    With Kind Regards,
    Senthil Alagu .P.

    You may be interested in reading Oracle on Vista: Statement of Direction on the topic.
    Incidentally, which version of Vista is it? Oracle tend to only support the professional/business editions of Windows.
    Cheers, APC

  • Pci data acquisition and signal processing controller -Device software not installed

    My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed  on my Device manager.
    Please suggest me a suitable solution.

    No its not working , Give me an alternate solution.

  • IPod/iPad cannot be used, required software not installed

    Hi,
    This problem just started after the last update to the latest iTunes for Windows.  When connecting to the computer, iTunes shows a popup that says:
    "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
    I've ran the installer and done that several times.  I've rest both iPod and iPad, but I still get the above error when trying to connect.
    Bob

    I finally had success!!  I saw in another forum a post where the person had the same problem and removed QuickTime and then iTunes, restarted, and then re-installed iTunes.  This person said it worked.  So, I took it a step more and did this:
    1-Uninstalled QuickTime
    2-Uninstalled Apple Moble Device Manager
    3-Uninstalled Apple Software Update Manager
    4-Uninstalled iTunes
    5-Restarted Computer
    6-Installed iTunes
    7-Restarted Computer
    After that, all is well.  You might not need to do all that, but that is what worked for me on my Windows 8 machine after the last iTunes update.

  • Have ipod touch vers 4.2.1...using itunes 64-bit vers....error when connecting...Required software not installed...asks me to install 64-bit vers.  Done everything possible

    I am using an older ipod touch with version 4.2.1 software (newest available).  I am using itunes 64-bit version 10.7 (newest).  when trying to connect i get this error message...."This ipod cannot be used because the proper software is not installed.  Install 64-bit itunes software."  As mentioned 64 bit IS installed.  Everything was working just fine a couple weeks ago.....no idea what happened!  I have run all the troubleshooting guides mentioned by apple....uninstall, reinstall, reset ipod, etc.
    No clue what is going on.....any possibility there is a "hidden" file within itunes that is causing this problem?
    Thanks in advance to all who help!!
    Kevin

    Yes...have done this numerous times.....even found some files that normal uninstall does not delete (.itl type).
    This really weird because I have several other computers in the house that all work just fine.  ALL run Windows 7, ALL have iTunes vers 10.7, ALL sync just fine.

  • Required software not installed

    When I open itunes with my iphone plugged into a USB I get the following message
    "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, the  install iTunes again."
    I have done this several times and it makes no difference. I have also run the troubleshooter which has, again, not worked.

    Try disabling any antivirus and firewall software you have installed, then remove and re-install iTunes. Don't re-enable the antivrus/firewall until after your first successful sync.

  • Ipod touch required software not installed although reinstalled 3 times, help please

    I had an ipod nano and itunes work fine, i bought new ipod touch 4G and connected it to itunes and get a message that say this ipod cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again. i have done this 3 times with latest itunes but still the same message ad ideas? Any help would be appreciated thanks

    If you have a PC I would try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Can't open MS Office docs because X11 software not installed.

    For a couple of weeks now almost every document I receive by email, and even some old documents of my own on my hard disk, will not open by double-clicking. When I do double-click a dialogue box appears which says "OpenOffice.org for Mac OS X cannot be started, because the X11 software is not installed. Please install Apple X11 first from the Mas OS x install DVD. More information: http://porting.openoffice.org/mac/faq/installing/X11.html". Please note that I can open all these docs OK from within Word etc (i.e. by going File / Open .....)
    Not having the Apple Install disk with me (I am traveling at the moment) I made some investigations and downloaded Open XML File Format Converter for Mac v 1.0 but clearly this has not solved the problem as I hoped.
    Any suggestions will be gratefully received.

    Simon50 wrote:
    For a couple of weeks now almost every document I receive by email, and even some old documents of my own on my hard disk, will not open by double-clicking. When I do double-click a dialogue box appears which says "OpenOffice.org for Mac OS X cannot be started, because the X11 software is not installed. Please install Apple X11 first from the Mas OS x install DVD. More information: http://porting.openoffice.org/mac/faq/installing/X11.html". Please note that I can open all these docs OK from within Word etc (i.e. by going File / Open .....)
    Not having the Apple Install disk with me (I am traveling at the moment) I made some investigations and downloaded Open XML File Format Converter for Mac v 1.0 but clearly this has not solved the problem as I hoped.
    Any suggestions will be gratefully received.
    For some reason, the default on your docs has been changed.
    If you right-click the document in question and select "Open With" and then select "Other" and browse to your MS Office Word app, you can select it. Be sure to check "Always Open With" to make it the default for the future so you do not have to repeat this procedure.

  • Why does Oracle 8i not install on Windows XP?

    Further to the question B4, Why does Orcale 8i not install on Pent 4?. I have no answer put I'm also trying to install 8i client on a Pent 4 running Windows XP Pro. I get no Error messages it just does not install.
    Can any one through any light on this.

    We have run in a installer Problem too on IBM Thinkpad.
    P4 makes trouble.
    There is a patch # 1507768 with a workaround
    and a 15.3 MB zip.
    ORACLE says :
    Patch 1507768
    Description INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4 (IV) PROCESSORS
    Product Universal Installer
    Release Installer 1.7.1
    Select a Platform MS Windows NT/2000 Server
    Select a Language American English
    Last Updated 06-APR-2001
    Size 15M (16097224 bytes)
    this helps maybe ...
    fritz

  • ITunes 5 says software not installed

    When I upgraded to iTunes 5 it installs fine. But when I open iTunes with my iPod mini installed it gives me an error that says "software required for communicating with iPod is not installed. Please reinstall iTunes." May not be exact wording. After I reinstall, the same thing happens. I have reverted back to 4.9 and it all seems to work. This seems to be a glitch with the new version.
    Anyone else?
    Shawn

    Okay. I uninstalled iTunes 5.0 by going through the remove programs. I then deleted ProgramFiles/iTunes and Program Files/iPod/bin. I then put the CD that I got with the iPod in and it installed iTunes 4.9. When I started iTunes, it said that the iTunes Library file was from a newer version of iTunes. I found this file in my account in the iTunes folder. As it happened the old one had been saved in a subdirectory. I put it back and iTunes showed my library.
    I am still having weird behavior with my iPod though. It goes to "do not disconnect" and never comes back. I cannot eject it or anything. Go figure.
    The other thing that is happening now is that when I log onto my wife's account, I cannot run iTunes. I get the -2054 error from Quicktime that I have seen posted. I do not get that from my account. Any info on this?
    Jim

Maybe you are looking for