Oracle Split Configuration - LinuxRH 4
Hi, Oracle Gurus,
We have purchased sun boxes with AMD64 and used them in Oracle Applications, a bunch of applications. The current solution is use 32bits version on Application tiers, that caused Database tier in 32 bits too. A waste of resources, at least we have 4CPU + 8G and 4G can be used only.
Also 64 versions are supposed to be stable and powerful than 32 versions, as mentioned by Oracle.
Now the Oracle Split Configuration came out since last June, but till now, it is under evaluation and test, no updated.
My questions are:
Is there someone who are using Oracle split configuration? and how do you like it? is there some issues, on either application or database side? Where is Oracle Develoment team, in west coast or east coast?
Your reply will be appreciated very much.
Hank
I haven't done it but the metalink certify page for ebusiness says the following...
11i Split configuration Information:
A "Supported Applications Platform" is defined as a platform that supports the Application and Database Tiers of the E-Business Suite. Currently the supported Applications platforms are:
HP Tru64
HP-UX PA-RISC
IBM AIX Based Systems
Linux x86
Solaris Operating System SPARC
Windows 2000/Windows Server 2003 (x86)
When E-Business Suite (Forms, Reports, concurrent programs, etc.) are installed on a supported Application platform, the following additional platforms may be used for the Database Tier (this is called a "Split Configuration Database Tier" model):
HP Alpha OpenVMS
HP-UX Itanium
IBM zSeries based Linux
Microsoft Windows Server 2003 x64 (AMD64/EM64T)
Microsoft Windows Server 2003 (Itanium)
Red Hat Enterprise AS/ES 4 (AMD64/EM64T)
Red Hat Enterprise AS/ES 3 (AMD64/EM64T)
Red Hat Enterprise AS/ES 2.1 (Itanium)
Red Hat Enterprise AS/ES 3 (Itanium)
Red Hat Enterprise AS/ES 4 (Itanium)
SLES-9 (AMD64/EM64T)
SLES-8 (AMD64)
SLES-9 (Itanium)
SLES-8 (Itanium)
Similar Messages
-
11i Split Configuration Certification Question
I have reviewed document 343917.1 and looked at the certifications, but I am a little confused on the split configuration certification options for 11i. We currently have 2 servers with our 11.5.10.2 environment. The db server has both the db and the admin and conc mgr. The app server has the web and forms. We are currently on a solaris sparc 32 bit for all tiers. We want to move to Linux. Assuming the app tier would be 32 bit RHEL, could we have the db tier on 64bit RHEL even though the conc mgr is on that tier? We are not planning on upgrading to 12 for at least a year and possibly longer."
Thanks in Advancecould we have the db tier on 64bit RHEL even though the conc mgr is on that tier? applications tier node Oracle Apps 11i is not certified with 64-bit Operating system.
SUSE linux and 11i
Check this notes for migration.
http://blogs.oracle.com/stevenChan/2010/04/10gr2_xtts_ebs11i.html
Export/Import DataPump Parameter VERSION - Compatibility of Data Pump Between Different Oracle Versions 553337.1
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1])
Note:- Migrating to Linux with Oracle Applications Release 11i 238276.1
Search Metalink for "238276.1", there are couple of issues which have been reported there you may encounter during this migration (AutoConfig, Relinking, ..etc).
Note: 316803.1 - Oracle Applications Release Notes, Release 11i (11.5.10.2)
Note: 316806.1 - Oracle Applications Intallation Update Notes, Release 11i (11.5.10.2)
Note: 294932.1 - Recommendations to Install Oracle Applications 11i -
i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.
"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122 -
Oracle 8i Configuration Tools Fails on Install
I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
RafaelPlease turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng -
INS-20802 Oracle net configuration assistant failed on windows server 2003 R2
Hi all,
I have windows server 2003 r2 installed on VM and tried installing oracle database 11g r2.
But got Oracle net configuration assistant failed. Below is the log
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Created config job for Oracle Net Configuration Assistant
INFO: Created config job for Oracle Database Configuration Assistant
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Entering ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeToolsInAggregate action performed
INFO: Exiting ConfigClient.executeToolsInAggregate method
INFO: Calling event ConfigToolsExecuted
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Created a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
INFO: Performing Configuration
INFO: Entering ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId=oracle.server
INFO: Entering ConfigClient.initClientAndSession method
INFO: ConfigClient.initClientAndSession status : connected to the config framework
INFO: ConfigClient.initClientAndSession session begun oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exiting ConfigClient.init method
INFO: Calling event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream method called
INFO: Entering ConfigClient.getToolsList method
INFO: Selecting job named 'Oracle Net Configuration Assistant' for retry
INFO: Selecting job named 'Oracle Database Configuration Assistant' for retry
INFO: Updating Transient Parameters in the Aggregates
INFO: Updating Transient Parameters for oracle.server
INFO: Updating Transient Parameters for oracle.assistants.netca.client
INFO: Updating Transient Parameters for oracle.assistants.server
INFO: Setting value to transient variable s_dbcaArgs
INFO: Setting value to transient variable S_SYSMANPASSWORD
INFO: Setting value to transient variable s_systemPasswordFlag
INFO: Setting value to transient variable s_sysmanPasswordFlag
INFO: Setting value to transient variable S_HOSTUSERPASSWORD
INFO: Setting value to transient variable s_dbcaArgsOverride
INFO: Setting value to transient variable windows_commandline_prefix
INFO: Setting value to transient variable s_sysPasswordFlag
INFO: Setting value to transient variable S_SYSPASSWORD
INFO: Setting value to transient variable s_asmsnmpPasswordFlag
INFO: Setting value to transient variable S_DBSNMPPASSWORD
INFO: Setting value to transient variable s_dbsnmpPasswordFlag
INFO: Setting value to transient variable S_ASMSNMPPASSWORD
INFO: Setting value to transient variable S_SYSTEMPASSWORD
INFO: Setting value to transient variable s_hostUserPasswordFlag
INFO: Updating Transient Parameters for OuiConfigVariables
INFO: Updating Transient Parameters for oracle.sysman.ccr
INFO: Updating Transient Parameters for oracle.sysman.console.db
INFO: Successfully updated Transient Parameters in the Aggregates
INFO: Configuration log directory - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Entering ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate=oracle.server:oracle.server:11.2.0.1.0:common
INFO: Entering ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
INFO: ConfigClient.assignAction action is of type :configuration
INFO: Exiting ConfigClient.assignAction method
INFO: ConfigClient.executeSelectedToolsInAggregate action assigned
INFO: Started Plugin named: Oracle Net Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: Starting 'Oracle Net Configuration Assistant'
INFO: UnsatisfiedLinkError exception loading native library: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: Can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome(Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main(NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services configuration failed. The exit code is 1
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed ConfigurationHi Srini,
The issue is resolved. Thanks for your response.
The issue is, windows 2003 server is 32 bit and I am trying to install 64 bit 11g database. I tried installing 32 bit 11g database. Before that I have cleared the traces of virtual box in my host system and reinstalled it and tried. It worked out.
Thanks
Sunil -
Installing Oracle - /etc/init.d/oracle-xe configure command missing?
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb (gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine)
Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
Manually uninstalling Oracle 10g
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 184865 files and directories currently installed.)
Preparing to replace oracle-xe-universal:i386 10.2.0.1-1.1 (using oracle-xe-universal_10.2.0.1-1.1_i386.deb) ...
Unpacking replacement oracle-xe-universal:i386 ...
Setting up oracle-xe-universal:i386 (10.2.0.1-1.1) ...
Executing Post-install steps...
Processing triggers for ureadahead ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
Rebuilding /usr/share/applications/desktop.en_US.utf8.cache...
Processing triggers for man-db ...
Processing triggers for python-support ...
rocky@ubuntu:~/git/mygit/edas2/libaio$
Now if I try to run the following command, it says command not found-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo /etc/init.d/oracle-xe configure
sudo: /etc/init.d/oracle-xe: command not found
rocky@ubuntu:~/git/mygit/edas2/libaio$
Even in applications menu I don't see the if oracle has been installed.
So i conclude first time installation was ok but somehow http client didn't worked.
After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Please help here.user1680826 wrote:
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.Not surprising, given that Ubuntu is not a supported OS for Oracle products.
Any reason you are not using a supported OS?
And any reason you are running two threads on the same problem? /etc/init.d/oracle-xe is missing?
>
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb (gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine)
Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
Manually uninstalling Oracle 10g
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 184865 files and directories currently installed.)
Preparing to replace oracle-xe-universal:i386 10.2.0.1-1.1 (using oracle-xe-universal_10.2.0.1-1.1_i386.deb) ...
Unpacking replacement oracle-xe-universal:i386 ...
Setting up oracle-xe-universal:i386 (10.2.0.1-1.1) ...
Executing Post-install steps...
Processing triggers for ureadahead ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
Rebuilding /usr/share/applications/desktop.en_US.utf8.cache...
Processing triggers for man-db ...
Processing triggers for python-support ...
rocky@ubuntu:~/git/mygit/edas2/libaio$
Now if I try to run the following command, it says command not found-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo /etc/init.d/oracle-xe configure
sudo: /etc/init.d/oracle-xe: command not found
rocky@ubuntu:~/git/mygit/edas2/libaio$
Even in applications menu I don't see the if oracle has been installed.
So i conclude first time installation was ok but somehow http client didn't worked.
After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
Please help here.Edited by: EdStevens on Jul 24, 2011 4:56 PM -
Oracle Validated Configurations - Yes or No
To satisfy my curiosity, I've just tried, for the first time, oracle-validated configuration on a clean 32-bit OEL-5.2 installation without oracle database software already installed. I've used the actual
oracle-validated-1.0.0-8.el5.i386
rpm package.
According to the official oracle documentation's recommendations and naming convention, taken as a standard, I can say that oracle-validated configuration more failed than succeeded.
CORRECT SETTINGS:
* /etc/sysctl.conf has been correctly set
* /boot/grub/grub.conf has been correctly set
FAILED SETTINGS AND INCORRECT CREATIONS:
* /etc/security/limits.conf has been correctly set for oracle, but all other entries in the file related to other users has been erased by validation script
* no modification of /etc/pam.d/login file (pam_limits.so)
* the script created 'dba' and 'oinstall' groups and 'oracle' user with 'dba' group as primary group (not 'oinstall'), that is not in compliance with official oracle documentation. To verify:
[root@localhost ~]# id oracle
uid=502(oracle) gid=502(dba) groups=502(dba),503(oinstall)
If oinstall is not the primary group, what is it supposed to do?
I'd appreciate if someone could clarify this dichotomy between Oracle official documentation's recommendations and "oracle-validated configuration".
Thanks in advance.
NJfrits hoogland wrote:
NJ, (and segio, please take my response in account),
If you read between the lines of my response I (more or less) make the some of the point you do.
-required rpms
'that's a job for OEL linux Installer': I can only come to conclusion 'the OEL linux installer' you talk about must be installation program of linux. There is no database option in there, so that installer can't help you. Or do you mean the database installer? The database installer only checks if the rpm's are installed.No, I meant OEL Linux installer (anaconda). When you choose packages to be installed, you can select them either individually or in various groups. A group called let's say "Oracle database 10g/11g required packages", as an option, would be very useful. I said - as an option - because OEL is not exclusively related to Oracle database. It is a distro, just like any other distro. Certainly this doesn't mean that "oracle-validated configuration" cannot be useful by checking (and resolving) the dependencies once again at any time when it is necessary. But, in any case, it should be the primary job for OEL installer at OEL installation time.
I agree with you that loosing settings is a very bad thing and should be considered a bug.Of course.
besides that I don't like the oracle user and groups to get random uid and gid's; in any environment you want that to be fixed numbers.
besides that the points I wanted to make was:
-it is not that it's not that hard to make a script which setups your environment in a basic way.
another point is that for rough and quick setup, a default linux system can be used to run a default installed database. no need to do any tweaks with system settings.
-an oracle validated package should not overwrite any settings (obviously), but should be flexible and 'steerable' so it can work together with system policiesCompletely agreed.
Regards
NJ -
Oracle 11g oui-25031 error (oracle database configuration assistant)
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any)
before executing the same.
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script
->/oracle/app/oracle/product/11.1.0/db_1/oui/bin/runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
->
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: 인벤토리 포인터 위치 /etc/oraInst.loc을(를) 읽을 수 없거나 존재하지 않습니다.
at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiIns tallAreaControl.java:1717)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:292)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:231)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:180)
at oracle.sysman.oii.oiic.OiicRunConfig.loadInventory(OiicRunConfig.java :278)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1004)
Exception in thread "main" java.lang.NullPointerException
at oracle.sysman.oii.oiic.OiicRunConfig.getArgumentList(OiicRunConfig.ja va:519)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1007)
hi!
i install oracle database 11g 1R .
error occur during installing oracle database.
please solve it!!OS version is fedora 3.
uname -a: Linux db9.sangjicom.ac.kr 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux
ORACLE_HOME is registred ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 in bash_profile.
Inventory is /oracle/app/Inventory. -
Oracle 11g "Oracle Database Configuration Assistant" failed
Hi
am trying to install oracle 10g databse .
am getting Configuration assistant "Oracle Database Configuration Assistant" failed
in log file i see
[Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
i have created microsoft loop back adapator and configured TCP/IP.
what would be the problem?At the Oracle Support site https://support.oracle.com
To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
HTH
Srini -
"Oracle Database Configuration Assistant" failed
I am attempting to install Oracle Database 11g R1 on CentOS 4.6 (Linux version 2.6.8-67.EL (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)).
The failure occurs after the message : "Oracle Net Configuration Assistant" succeeded
This message is in the log /u01/app/oraInventory/logs/InstallActions2008-07-07_09-22-20PM.log, and states:
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
Exception : java.lang.OutOfMemoryError: Java heap space
The instance instance was running after the failure and I could access it through EM, but after shutdown it cannot be brought up.
Does anyone know what might be done to prevent the heap space error? This was my third attempt at installing. I specified DW type database and also automated backups. I may try one more time booting the system with telinit 3 to free up some memory by not running GUIs, and if that fails I may try eliminating automated backups from the install.
Any other ideas?
Thanks,
akhFYI, I was able to install without error after the following changes:
-reduced fs.file-max from 6553600 to 65536 (not sure where the extra 00 came from :-) )
-changed type of database from data warehouse to standard/oltp
-unchecked the option for automated backups
Unfortunately, I'm not sure at this point which of the 3 changes made the most difference.
-akh -
Problem during installation oracle database configuration assistant FAILED
Hi Dear,
The Configurations are :
VM OS : Oracle enterprise linux 5
Trying to install : Oracle 11g R1
I'm having a real problem , so i can't continue my installation during the configuration assistant, oracle net configuration assistant was succeeded but oracle database configuration assistant FAILED
Here is the long message showed by console :
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/11.1.0/db_1/bin/netca /orahome /u01/app/oracle/product/11.1.0/db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = /u01/app/oracle/product/11.1.0/db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = /u01/app/oracle/product/11.1.0/db_1/network/install/netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
/u01/app/oracle/product/11.1.0/db_1/bin/lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid DB11G -gdbName DB11G.WORLD -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please help me it's urgentlyPlease help me i can't find any solution to resolve this trouble
Should i uninstall this version or what exactly, could you please suggest to me something like another release who matches that configuration
Sorry but i have no idea
Waiting for the response -
Configuration assistant "Oracle Database Configuration Assistant" failed
I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found. Failed <<<<
Checking for PHSS_33279; found Not found. Failed <<<<
Checking for PHSS_33277; found Not found. Failed <<<<
Checking for PHSS_33279; found Not found. Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM -
Oracle Net Configuration Assistant Error
Hi,
when i'm installing oracle 10.2.2 on RHEL 5.5 This error occured. how can i solve?
log file;_
INFO: Starting to execute configuration assistants
INFO: Command = /oracle/orcl/10.2.2/jdk/jre//bin/java -Duser.dir=/oracle/orcl/10.2.2/network/jlib -classpath /oracle/orcl/10.2.2/jdk/jre//lib/i18n.jar:/oracle/orcl/10.2.2/jdk/jre//lib/rt.jar:/oracle/orcl/10.2.2/jlib/ewt3.jar:/oracle/orcl/10.2.2/jlib/ewtcompat-3_3_15.jar:/oracle/orcl/10.2.2/jlib/netcfg.jar:/oracle/orcl/10.2.2/network/jlib/netcam.jar:/oracle/orcl/10.2.2/network/jlib/netca.jar:/oracle/orcl/10.2.2/jlib/help4.jar:/oracle/orcl/10.2.2/jlib/jewt4.jar:/oracle/orcl/10.2.2/jlib/oracle_ice.jar:/oracle/orcl/10.2.2/jlib/share.jar:/oracle/orcl/10.2.2/jlib/swingall-1_1_1.jar:/oracle/orcl/10.2.2/jlib/srvmhas.jar:/oracle/orcl/10.2.2/jlib/srvm.jar:/oracle/orcl/10.2.2/network/tools:/oracle/orcl/10.2.2/jlib/ldapjclnt9.jar:/oracle/orcl/10.2.2/jlib/ldapjclnt10.jar:/oracle/orcl/10.2.2/oui/jlib/OraInstaller.jar:/oracle/orcl/10.2.2/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /oracle/orcl/10.2.2 /orahnam OraDb10g_home1 /instype custom /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /oracle/orcl/10.2.2/network/install/netca_typ.rsp
etected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x328B33
Function=index+0x63
Library=/lib/libc.so.6
Current Java thread:
at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
at oracle.net.ca.InitialSetup.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
001ac000-00200000 r-xp 00000000 fd:00 1019071 /usr/lib/libXt.so.6.0.0
00200000-00204000 rwxp 00054000 fd:00 1019071 /usr/lib/libXt.so.6.0.0
0029b000-002b5000 r-xp 00000000 fd:00 262157 /lib/ld-2.5.so
002b5000-002b6000 r-xp 00019000 fd:00 262157 /lib/ld-2.5.so
002b6000-002b7000 rwxp 0001a000 fd:00 262157 /lib/ld-2.5.so
002b9000-003f8000 r-xp 00000000 fd:00 260625 /lib/libc-2.5.so
003f8000-003f9000 ---p 0013f000 fd:00 260625 /lib/libc-2.5.so
003f9000-003fb000 r-xp 0013f000 fd:00 260625 /lib/libc-2.5.so
003fb000-003fc000 rwxp 00141000 fd:00 260625 /lib/libc-2.5.so
00401000-00403000 r-xp 00000000 fd:00 260640 /lib/libdl-2.5.so
00403000-00404000 r-xp 00001000 fd:00 260640 /lib/libdl-2.5.so
00404000-00405000 rwxp 00002000 fd:00 260640 /lib/libdl-2.5.so
00407000-0041b000 r-xp 00000000 fd:00 260687 /lib/libpthread-2.5.so
0041b000-0041c000 r-xp 00013000 fd:00 260687 /lib/libpthread-2.5.so
0041c000-0041d000 rwxp 00014000 fd:00 260687 /lib/libpthread-2.5.so
00421000-00446000 r-xp 00000000 fd:00 260632 /lib/libm-2.5.so
00446000-00447000 r-xp 00024000 fd:00 260632 /lib/libm-2.5.so
00447000-00448000 rwxp 00025000 fd:00 260632 /lib/libm-2.5.so
00520000-00525000 r-xp 00000000 fd:00 1019174 /usr/lib/libXdmcp.so.6.0.0
00525000-00526000 rwxp 00004000 fd:00 1019174 /usr/lib/libXdmcp.so.6.0.0
00528000-00627000 r-xp 00000000 fd:00 1020054 /usr/lib/libX11.so.6.2.0
00627000-0062b000 rwxp 000ff000 fd:00 1020054 /usr/lib/libX11.so.6.2.0
0062d000-0063c000 r-xp 00000000 fd:00 1020412 /usr/lib/libXext.so.6.4.0
0063c000-0063d000 rwxp 0000e000 fd:00 1020412 /usr/lib/libXext.so.6.4.0
00653000-00655000 r-xp 00000000 fd:00 1019079 /usr/lib/libXau.so.6.0.0
00655000-00656000 rwxp 00001000 fd:00 1019079 /usr/lib/libXau.so.6.0.0
0065f000-0066e000 r-xp 00000000 fd:00 260689 /lib/libresolv-2.5.so
0066e000-0066f000 r-xp 0000e000 fd:00 260689 /lib/libresolv-2.5.so
0066f000-00670000 rwxp 0000f000 fd:00 260689 /lib/libresolv-2.5.so
00674000-00687000 r-xp 00000000 fd:00 262140 /lib/libnsl-2.5.so
00687000-00688000 r-xp 00012000 fd:00 262140 /lib/libnsl-2.5.so
00688000-00689000 rwxp 00013000 fd:00 262140 /lib/libnsl-2.5.so
007e6000-007fd000 r-xp 00000000 fd:00 1021459 /usr/lib/libICE.so.6.3.0
007fd000-007fe000 rwxp 00016000 fd:00 1021459 /usr/lib/libICE.so.6.3.0
00802000-0080a000 r-xp 00000000 fd:00 1017973 /usr/lib/libSM.so.6.0.0
0080a000-0080b000 rwxp 00007000 fd:00 1017973 /usr/lib/libSM.so.6.0.0
00bfd000-00c02000 r-xp 00000000 fd:00 1039163 /usr/lib/libXtst.so.6.1.0
00c02000-00c03000 rwxp 00004000 fd:00 1039163 /usr/lib/libXtst.so.6.1.0
08048000-08056000 r-xp 00000000 fd:00 859779 /oracle/orcl/10.2.2/jdk/jre/bin/java
08056000-08059000 rwxp 0000d000 fd:00 859779 /oracle/orcl/10.2.2/jdk/jre/bin/java
08d36000-090fe000 rwxp 08d36000 00:00 0 [heap]
e91ec000-e93c8000 r-xp 00000000 fd:00 853448 /oracle/orcl/10.2.2/lib32/libnnz10.so
e93c8000-e93ee000 rwxp 001dc000 fd:00 853448 /oracle/orcl/10.2.2/lib32/libnnz10.so
e93f0000-ea11d000 r-xp 00000000 fd:00 853494 /oracle/orcl/10.2.2/lib32/libclntsh.so.10.1
ea11d000-ea17e000 rwxp 00d2c000 fd:00 853494 /oracle/orcl/10.2.2/lib32/libclntsh.so.10.1
ea192000-ea1a7000 r-xp 00000000 fd:00 853447 /oracle/orcl/10.2.2/lib32/libnjni10.so
ea1a7000-ea1ab000 rwxp 00014000 fd:00 853447 /oracle/orcl/10.2.2/lib32/libnjni10.so
ea1ab000-ea2d3000 r-xs 00000000 fd:00 854667 /oracle/orcl/10.2.2/lib/xmlparserv2.jar
ea2d3000-ea2da000 r-xp 00000000 fd:00 1040401 /usr/lib/libXp.so.6.2.0
ea2da000-ea2db000 rwxp 00006000 fd:00 1040401 /usr/lib/libXp.so.6.2.0
ea2e5000-ea2e9000 r-xp 00000000 fd:00 260646 /lib/libnss_dns-2.5.so
ea2e9000-ea2ea000 r-xp 00003000 fd:00 260646 /lib/libnss_dns-2.5.so
ea2ea000-ea2eb000 rwxp 00004000 fd:00 260646 /lib/libnss_dns-2.5.so
ea2eb000-ea2f8000 r-xp 00000000 fd:00 853534 /oracle/orcl/10.2.2/lib32/libldapjclnt10.so
ea2f8000-ea2fa000 rwxp 0000c000 fd:00 853534 /oracle/orcl/10.2.2/lib32/libldapjclnt10.so
ea2fa000-ea34d000 r-xp 00000000 fd:00 859725 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libmlib_image.so
ea34d000-ea34e000 rwxp 00052000 fd:00 859725 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libmlib_image.so
ea34e000-ea61f000 r-xp 00000000 fd:00 859708 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libawt.so
ea61f000-ea635000 rwxp 002d0000 fd:00 859708 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libawt.so
ea65a000-ea9f7000 r-xs 00000000 fd:00 857725 /oracle/orcl/10.2.2/oui/jlib/OraInstaller.jar
ea9f7000-eaa3c000 r-xs 00000000 fd:00 851758 /oracle/orcl/10.2.2/ldap/oidadmin/dasnls.jar
eaa3c000-eaa48000 r-xs 00000000 fd:00 852084 /oracle/orcl/10.2.2/jlib/jssl-1_1.jar
eaa48000-eaae0000 r-xs 00000000 fd:00 853008 /oracle/orcl/10.2.2/jlib/ldapjclnt10.jar
eaae0000-eaba7000 r-xs 00000000 fd:00 851920 /oracle/orcl/10.2.2/jlib/srvm.jar
eaba7000-eabb5000 r-xs 00000000 fd:00 851922 /oracle/orcl/10.2.2/jlib/srvmhas.jar
eabb5000-eabc3000 r-xs 00000000 fd:00 855444 /oracle/orcl/10.2.2/jlib/share.jar
eabc3000-eac78000 r-xs 00000000 fd:00 855084 /oracle/orcl/10.2.2/jlib/oracle_ice.jar
eac78000-eae1f000 r-xs 00000000 fd:00 855082 /oracle/orcl/10.2.2/jlib/jewt4.jar
eae1f000-eae84000 r-xs 00000000 fd:00 854650 /oracle/orcl/10.2.2/jlib/help4.jar
eae84000-eaeb6000 r-xs 00000000 fd:00 851592 /oracle/orcl/10.2.2/network/jlib/netca.jar
eaeb6000-eaedc000 r-xs 00000000 fd:00 851593 /oracle/orcl/10.2.2/network/jlib/netcam.jar
eaedc000-eaf25000 r-xs 00000000 fd:00 855286 /oracle/orcl/10.2.2/jlib/netcfg.jar
eaf25000-eaf33000 r-xs 00000000 fd:00 851669 /oracle/orcl/10.2.2/jlib/ewtcompat-3_3_15.jar
eaf33000-eb1b8000 r-xs 00000000 fd:00 855086 /oracle/orcl/10.2.2/jlib/ewt3.jar
eb1b8000-eb1c5000 r-xs 00000000 fd:00 859697 /oracle/orcl/10.2.2/jdk/jre/lib/ext/ldapsec.jar
eb1c5000-eb1c8000 r-xs 00000000 fd:00 859881 /oracle/orcl/10.2.2/jdk/jre/lib/ext/smtp.jar
eb1c8000-eb1e4000 r-xs 00000000 fd:00 859699 /oracle/orcl/10.2.2/jdk/jre/lib/ext/sunjce_provider.jar
eb1e4000-eb2a0000 r-xs 00000000 fd:00 859698 /oracle/orcl/10.2.2/jdk/jre/lib/ext/localedata.jar
eb2a0000-eb2e5000 r-xs 00000000 fd:00 859879 /oracle/orcl/10.2.2/jdk/jre/lib/ext/mail.jar
eb2e5000-eb30b000 r-xs 00000000 fd:00 859880 /oracle/orcl/10.2.2/jdk/jre/lib/ext/mailapi.jar
eb30b000-eb319000 r-xs 00000000 fd:00 859882 /oracle/orcl/10.2.2/jdk/jre/lib/ext/activation.jar
eb51d000-eb71d000 r-xp 00000000 fd:00 1014149 /usr/lib/locale/locale-archive
f59c8000-f5f68000 r-xs 00000000 fd:00 859244 /oracle/orcl/10.2.2/jdk/jre/lib/charsets.jar
f5f68000-f5f79000 r-xs 00000000 fd:00 859282 /oracle/orcl/10.2.2/jdk/jre/lib/jce.jar
f5f79000-f6056000 r-xs 00000000 fd:00 859283 /oracle/orcl/10.2.2/jdk/jre/lib/jsse.jar
f6056000-f606c000 r-xs 00000000 fd:00 859291 /oracle/orcl/10.2.2/jdk/jre/lib/sunrsasign.jar
f60b6000-f7a61000 r-xs 00000000 fd:00 859290 /oracle/o
rcl/10.2.2/jdk/jre/lib/rt.jar
f7a61000-f7a75000 r-xp 00000000 fd:00 859731 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libzip.so
f7a75000-f7a78000 rwxp 00013000 fd:00 859731 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libzip.so
f7a78000-f7a98000 r-xp 00000000 fd:00 859716 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libjava.so
f7a98000-f7a9a000 rwxp 0001f000 fd:00 859716 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libjava.so
f7a9a000-f7aaa000 r-xp 00000000 fd:00 859730 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libverify.so
f7aaa000-f7aac000 rwxp 0000f000 fd:00 859730 /oracle/orcl/10.2.2/jdk/jre/lib/i386/libverify.so
f7aac000-f7eb2000 r-xp 00000000 fd:00 859737 /oracle/orcl/10.2.2/jdk/jre/lib/i386/client/libjvm.so
f7eb2000-f7ecd000 rwxp 00405000 fd:00 859737 /oracle/orcl/10.2.2/jdk/jre/lib/i386/client/libjvm.so
f7ee2000-f7ee5000 r-xs 00000000 fd:00 859696 /oracle/orcl/10.2.2/jdk/jre/lib/ext/dnsns.jar
f7ee5000-f7ee8000 r-xs 00000000 fd:00 859878 /oracle/orcl/10.2.2/jdk/jre/lib/ext/jta.jar
f7ee8000-f7eec000 rwxs 00000000 fd:00 9935681 /tmp/hsperfdata_oracle/22803
f7eec000-f7ef5000 r-xp 00000000 fd:00 260648 /lib/libnss_files-2.5.so
f7ef5000-f7ef6000 r-xp 00008000 fd:00 260648 /lib/libnss_files-2.5.so
f7ef6000-f7ef7000 rwxp 00009000 fd:00 260648 /lib/libnss_files-2.5.so
f7ef7000-f7eff000 r-xp 00000000 fd:00 859738 /oracle/orcl/10.2.2/jdk/jre/lib/i386/native_threads/libhpi.so
f7eff000-f7f00000 rwxp 00007000 fd:00 859738 /oracle/orcl/10.2.2/jdk/jre/lib/i386/native_threads/libhpi.so
ff98a000-ff99f000 rwxp 7ffffffea000 00:00 0 [stack]
Heap at VM Abort:
Heap
def new generation total 576K, used 312K [0xeb920000, 0xeb9c0000, 0xebe00000)
eden space 512K, 48% used [0xeb920000, 0xeb95e2c8, 0xeb9a0000)
from space 64K, 100% used [0xeb9b0000, 0xeb9c0000, 0xeb9c0000)
to space 64K, 0% used [0xeb9a0000, 0xeb9a0000, 0xeb9b0000)
tenured generation total 1408K, used 493K [0xebe00000, 0xebf60000, 0xef920000)
the space 1408K, 35% used [0xebe00000, 0xebe7b618, 0xebe7b800, 0xebf60000)
compacting perm gen total 4096K, used 3566K [0xef920000, 0xefd20000, 0xf3920000)
the space 4096K, 87% used [0xef920000, 0xefc9b928, 0xefc9ba00, 0xefd20000)
Local Time = Thu Jul 21 07:04:51 2011
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid22803.log.
# Please refer to the file for further information.
Command = /oracle/orcl/10.2.2/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/orcl/10.2.2
Configuration directory is set to /oracle/orcl/10.2.2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/orcl/10.2.2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OKCheck the /etc/hosts and make sure the correct hostname is setup. Make sure DNS is setup (check the resolv.conf)
Ex.
cat /etc/resolv.conf
Test using ping
From your post (So it errors when it tries to get the domain name)
at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)Retry operation.
Best Regards
mseberg
Edited by: mseberg on Jul 21, 2011 7:39 AM -
Oracle Clusterware Configuration Assistant fails
I am installing clusterware 11.1.0.6 and the runcluvfy commands all came back as passed, except for the VIP, which the documentation says to ignore. The whole install goes to 100%, then it runs the configuration assistants.
It falls over on the first of these: Oracle Configuration Assistant. If I retry it, the same addition is placed in the logfile, as below:
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vm-rac1 vm-rac1-priv vm-rac1
node 2: vm-rac2 vm-rac2-priv vm-rac2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\11.1.0\crs)
Step 3: configuring OCR repository
Oracle Cluster Registry already initialized
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
vm-rac1 failed to startup service OracleCSService, err(1068)
vm-rac2 failed to startup service OracleCSService, err(1068)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\11.1.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\11.1.0\crs
Configuration directory is set to C:\oracle\11.1.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is null
INFO: Since the option is to overwrite the existing C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\11.1.0\crs\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Please help.Sorry:
alertvm-rac1.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.531
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.609
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.671
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:25.687
[client(3792)]CRS-1006:The OCR location \\.\ocrcfg is inaccessible. Details in C:\oracle\11.1.0\crs\log\vm-rac1\client\ocrconfig_3788.log.
2009-05-20 15:44:28.921
[client(3792)]CRS-1013:The OCR at \\.\ocrcfg was successfully formatted using version 2. Ignore earlier CRS-1006 messages if any.
2009-05-20 15:44:40.875
[client(3796)]CRS-1801:Cluster vm-rac_cluster configured with nodes vm-rac1 vm-rac2 .
client\clscfg.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 16:31:03.796: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.812: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.875: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.921: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 16:31:03.937: [ OCROSD][3196]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
client\clsfmt.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.031: [ OCROSD][3872]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:40.187: [ CLSFMT][3872]clsfmt: successfully initialized file \\.\votedsk1
client\ocrconfig_3788.log:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-05-20 15:44:25.453: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.484: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.531: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.562: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.562: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.562: [ OCRCONF][3792]ocrconfig starts...
2009-05-20 15:44:25.578: [ OCRCONF][3792]Upgrading OCR data
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.609: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.609: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.609: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.609: [ OCRCONF][3792]Exporting OCR data to [OCRUPGRADEFILE]
2009-05-20 15:44:25.640: [ OCRAPI][3792]a_init:7!: Backend init unsuccessful : [33]
2009-05-20 15:44:25.640: [ OCRCONF][3792]There was no previous version of OCR. error:[PROC-33: Oracle Cluster Registry is not configured]
2009-05-20 15:44:25.656: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.671: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.671: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.671: [ default][3792]a_init:7!: Backend init unsuccessful : [22]
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.687: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]ibctx:1:ERROR: INVALID FORMAT
2009-05-20 15:44:25.687: [ OCRRAW][3792]proprinit:problem reading the bootblock or superbloc 22
2009-05-20 15:44:25.687: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.703: [ OCRRAW][3792]propriogid:1: INVALID FORMAT
2009-05-20 15:44:25.875: [ OCROSD][3792]utgdv:11:could not read reg value ocrmirrorconfig_loc os error= The system could not find the environment option that was entered.
2009-05-20 15:44:25.921: [ OCRRAW][3792]propriowv: Vote information on disk 0 [\\.\ocrcfg] is adjusted from [0/0] to [2/2]
2009-05-20 15:44:28.921: [ OCRRAW][3792]iniconfig:No 92 configuration
2009-05-20 15:44:28.921: [ OCRAPI][3792]a_init:6a: Backend init successful
2009-05-20 15:44:30.593: [ OCRCONF][3792]Initialized DATABASE keys in OCR
2009-05-20 15:44:31.453: [ OCRCONF][3792]csetskgfrblock0: output from clsmft: [clsfmt: Failure trying to resize OCR file \\.\ocrcfg
from 10725732864 bytes to 10725736448 bytes
clsfmt: successfully initialized file \\.\ocrcfg
g
2009-05-20 15:44:31.531: [ OCRCONF][3792]Successfully set skgfr block 0
2009-05-20 15:44:31.531: [ OCRCONF][3792]Exiting [status=success]...
So, it seems to be all about the OCR not setup correctly, however, all I've done is follow the notes. This was a 'clean' VM install of win2003 Server, so nothing has been accidently tinkered with. -
Oracle 10g Configuration for Student Edition
To Whom It May Concern,
I am currently enrolled in an Oracle 10g course at a local community college, and am using the "Guide to Oracle 10g" textbook by Morrison, Morrison & Conrad (ISBN: 0-619-21629-8). This book came with two CD's that contain a scaled-down student version of two Oracle 10g databases (Northwoods University & Clearwarter Traders).
I have attempted to install and configure the database software so that I can log on to the databases using SQL*Plus, but I am unable to do so. When attempting to log on, I get a "TNS:no listener" error (ORA-12541) or similar error. I have tried adding and configuring a listener, net service, etc. using the Oracle Net Configuration Assistant, but nothing works. The configuration tests always fail. I am sure that I am using the correct host name (I checked the TNSNames.ora file).
Can you please assist? Do you have documentation (or advice) on how to successfully configure this software?
Thank you,
GregThanks again for your reply, Phiri. I tried your suggestion, but still get the same errors. I tried searching the Oracle Home directory for a batch or executable file with the name "lsnrctl", but the search only returns two htm files. It looks like it can't execute the program simply because it does not exist.
NOTE: According to the .htm files, you are supposed to include the listener name after the command.
Ex: lsnrctl start My_Listener_01
I tried this, but it did not work either
DOS commands and error messages are as follows:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Eddie>cd ../..
C:\>cd C:\Oracle_Home_01\BIN
C:\Oracle_Home_01\BIN>lsnrctl status
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Oracle_Home_01\BIN>lsnrctl status MY_LISTENER_01
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start MY_LISTENER_01
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>lsnrctl start SID_LIST_MY_LISTENER_0
'lsnrctl' is not recognized as an internal or external command,
operable program or batch file.
C:\Oracle_Home_01\BIN>
Maybe you are looking for
-
How do I delete one of the two itunes accounts on my iPhone?
I used to sync my phone on my daughter's computer, and somehow both accounts (mine and hers) got on my iPhone. When I try to download or update apps, it either asks for my password or my daughter's, and I can't update my apps anymore because I do not
-
How should i log out from my existing i phone frome i cloud
i have got a new iphone and wanna logout from old one with all the data in it.i want to remove all data to my new iphone.
-
How can I create a document with piece-making?
Hello Community, I am looking to create a template document that allows quick inserting and removing of pre-made statements for a list, yet are editable to a degree. I am imagining I would be able to use the Repeating Section Content Control with Dr
-
Looking for a Client Tracking App
I have a small women's clothing boutique. I have no POS system. Is there a an app for client information and tracking purchases? Having a way to pull info for events and in store specials from past purchases would be great.
-
Receiving non system disk error when trying to install Windows 8.1 full version on Mac Mini
I am trying to install Windows 8.1 full version on a Late 2012 Mac Mini using OS X 10.9.2 using boot camp. The windows partion has been created but when the mac mini reboots I receive a Non System Disk error. Press any key to continue Please could s