Oracle sql*plus encountered a problem and needs to be closed

hello all,
actually many times on internet i red that this is classic windows error, while looking for resolution to this error.....but there are many reasons specified......some says virus, some says multiple oracle homes, some says PATH environment variable....i searched net a lot for this error but no specific resolution found....
but i am almost unable to understand reason in my scenario...my set up is as follows:
OS:- windows XP SP2
database:- oracle database XE
other:- D2K6i (installed in its own home
environmental variable set :- PATH with D2K6i and oracle XE home
i alos tried setting ORACLE_HOME variable to XE oracle home but no luck
i tried almost all trick to resolve this issue, my sqlplus in oracle XE home is not opening ....it just blink and then disappear..when i type sqlplus in run dialog box it opens the sqlplus of D2K6i....and anti virus software is updated on that machine..
and when i tried to connect to XE on same machine..then it is generating this error with window and that useless "Don't send" window error....
what might be the reason???? i have tried almost all tricks....any other change need to be done??
any suggestion is appreciable???
thanks and regards
VD
Edited by: dixit on Aug 24, 2009 9:57 PM
Edited by: dixit on Aug 24, 2009 9:58 PM

hello satish sir,
i resolved the issue, i repaired the XE installation with XE universal installer, i don't know what was the issue but it is now working....
thanks for your kind support...
thanks and regards
VD

Similar Messages

I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

I am trying to download iTunes and am getting an error message: "MobileMe Services encountered a problem and need to be closed"

Hello dananbar,
Thank you for the details of the issue you are experiencing when installing iTunes. I recommend following the steps in the article below when getting an error message trying to install iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

ITunes has encountered a problem and needs to be closed - launch message

Well like others..now you see it ....now you don't.
Where did my iTunes go.
I get the above message when trying to launch iTunes.
I have tried unistalling and reinstalling, tried the stand alone quicktime player etc etc
Please help, tell me it is something simple
ps, my ArcSoft video editor has now got the same message

I am in the same boat as some of the other posters. My iTunes for the Windows XP computer has always been touchy and it sometimes freezes up if I transfer a large number of files to my iPod but i could always start it up again. Now I get the same "encountered a problem" message. My problems did not start until the Apple Updater downloaded and installed the newest iTunes software.
I have tried the following steps from other similar posts before bring my troubles to this board. Nothing has worked so far.
1. removed both iTunes and Quicktime
2. turned off antivirus and antispyware and firewall programs
3. reinstalled each separetely and Quicktime starts perfectly
4. removed preference files for iTunes
5. i actually restored my iPod defaults just incase that was the problem.
At this point I would be happly with an older version of iTunes that worked previously. I have an older PC so if the current iTunes is not compatable where could I find an older working version of iTunes. I have an older iPod and have no interest in video or pictures.
Compaq Presario Windows XP Pro 750 MHZ AMD duron, 512 MB RAM

ITunes has encountered a problem and needs to be closed

itunes version 7.1.1 tried some fresh installations and tried diffirent installation paths

First check to see if Quicktime works, iTunes can't work without it.
If Quicktime doesn't work, uninstall it and install the stand alone version, option 2 from here:
http://www.apple.com/quicktime/download/win.html
If Quicktime works, go on to this article:
http://docs.info.apple.com/article.html?artnum=302856

RCConsole MFC Application has encountered a problem and needs to close

Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciated

Vc++ error messages,fatal errors: Error message: Msvc32i MFC application has encountered a problem and needs to close MFC vc++ c++
Originally Posted by [email protected]
Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciated

Oracle SQL*PLUS has encountered a problem and needs to close

When I have done like below,
C:\Documents and Settings\himanshu.chaudhari>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 14 07:38:22 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn sys@dev as sysdba
Enter password:
Connected.
SQL> spool e:/spool/test.log
SQL> @e:/spool/ms_script.sql
Got error like ,
Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience.
AppName: sqlplus.exe AppVer: 0.0.0.0 ModName: oranls10.dll
ModVer: 10.2.0.1 Offset: 0005d6ff
I am using,
Operating System: Microsoft Windows XP Professional Version 2002 Service Pack 3,
Have two different oracle client on same drive
1) 10.2.0.1.0
2) 8.1.7.4.0
I have tried,
Run selecthome.bat from BIN but got same error,
Run sqlpus.exe from particular home then also got same error..
So , Please anyone can have some idea regarding the same ?

Is there any other error in error.log file?
What do you run in that (ms_script) script?
Have you used both sqlplus?
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry

I have installed oracle10g release2(10.2.0.1.0) in my system
my porblem when i am trying to issue command
SQL> commit;
Commit complete.
SQL> cl scr;
then it is show below mentioned error
Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience.
Please can anybody help for me.
with regards,
srinivas.

When working with mixed environments you should make sure the path environment variable is consistent with the executables you are currently running, and try not to mix them, i.e. if you are working with the sqlplus from 9i, make sure you execute the sqlplus.exe file from the 9i oracle home and temporarily by means of a batch file put your Oracle Home 9i executables prior to those of 10g , and the other way around, when executing from the 10g make sure all executables and paths are consistent. It should be easier since when installing oracle, oracle configures the PATH environment variable so it can be seen first in the path environment variable.
In your case you are using two compatible versions, but if the dll's get mixed there could be unexpected results.
~ Madrid
http://hrivera99.blogspot.com/

Oracle Forms Designer has encountered a problem and needs to close

Dear All,
I got the following error when I compile the form,
Oracle Forms Designer has encountered a problem and needs to close
I am using Oracle 10g Developer suite(Forms 32 Bit Version 10.1.2.0.2)
and Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
and Window Xp Professional 32 Bit Operating system
Now I can't do any changes in the form.
I searched lot of oracle forums .but i can't solve it.
Please give me one solution
I am strugling this issue.
Please help me........
a lot of thanks in advance.
Thanks and Regards,
Fazil

Hi,
I am doing the bug fixing in the existing form.Its size is 4.07 MB.when i will get the mentioned error.then i will take previos fmb.then again doing the changes after some time agin will come the mention error.I added some if else condtion code.Its a small code.I think its not a reason for the mentioned error.I think something is happended.I don't know what happened?
Please help me..
Thanks and Regards,
Fazil

Oracle intelligent agent executable has encountered a problem and needs to

Hi All,
I am getting the following message after commence of OS (windows XP) on my LAPTOP.
"Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
Thanks in advance.

Hi Tapash,
You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
[OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
Regards
Peter

Oracle Intelligent Agent Exe encountered a problem and needed to close

Whenever the server is rebooted I get the error "Oracle Intelligent Agent Executable encountered a problem and needed to close". The agent won't start, and I found a work around that included deleting files from the network/agent and admin folders, then restarting the agent. This works, however the next time the server reboots I have to go through all of this again. Any ideas why this keeps occurring?
Also, what does this agent do? I've read through some documentation and can't quite tell if I actually need it started. Do you use this agent to only remotely monitor/administer through OEM? I'm really confused and could use some insight. All my process appear to be working fine.

Because of the error message I guess you are on Windows and database version is lower than 10g (by the way it's always a good idea to tell the environment, because Oracle runs on different platforms in different versions).
... 'encountered a problem and needed to close' is generic Windows error message with millions of possible reasons. So it's not possible to find remotely a solution. You are right, Intelligent Agent is a counterpart of OEM, but outside production environments rarely needed. I recommend you change the service properties from 'automatic' to 'manual' in control panel. So it does not start at reboot time.
Werner

Frequent "Firefox has encountered a problem and needs to shut down" window. Need to disable adblock plus and AVG safe search to continue. Any way to fix?

For about a third of websites I visit, at some point I receive a "Firefox has encountered a problem and needs to shut down" window. I have to disable both Adblock plus and AVG safe search in order to continue. This used to happen for two or so sites, and I disabled the ad-ons before going to those sites. It has increased to the point that the adblock plus and safe search ad-ons are becoming pretty useless. Is there any way to rectify this problem. Sending error reports has no effect.

soytuyosimeamas wrote:
I tried to update but it would not allow me to update, isn't that odd!?
Have you changed anything in the Photoshop installation areas? If the updater doesn't find a pristine installation it will fail.
The only area you should ever put anything into is the plug-ins subfolder. Everything else is hands-off.
-Noel

Reports Builder has encountered a problem and needs to close.

Hi All,
The report builder in my system is behaving weirdly. If I open a report, which is having a normal browser output, it allowing me to see the data model, layout model and everything. And if I open a report, which is having a PDF output, it's not allowing me to open the Layout.
Here the output is in context of Oracle Applications front-end. And as I know it shouldn't be a problem with Report Builder.
It errors out with the following message.
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
And the error report contains the following message.
AppName: rwbld60.exe     AppVer: 3.0.0.0     ModName: mmc60.dll
ModVer: 0.0.0.0     Offset: 0000c533
Here is the version information:
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser     1.0.2.1.0     Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
I have tried reinstalling the software a minimum of 10 times, but no luck. At last I got my system formatted and tried. For the first time it worked for me, then I installed Forms Builder... then again I am getting the same problem even though I have different homes for Reports and Forms.
Is it problem with my system or the Operating System or the version of the Oracle Developer?
Can anyone please help me out?
Thanks in advance,
Lakshman.

I have been having a similar problem and do not know if this will apply to your situation but I found the following on Metalink.
Subject:      Reports Builder Crashes Opening the Paper Layout on Large Reports on XP/2003
     Doc ID:
Note:566304.1     Type:      PROBLEM
     Last Revision Date:      18-AUG-2008     Status:      PUBLISHED
In this Document
Symptoms
Changes
Cause
Solution
References
Applies to:
Oracle Reports Developer - Version: 10.1.2.0.2 to 10.1.2.3
Microsoft Windows XP
Microsoft Windows Server 2003
Symptoms
Oracle Reports Builder crashes opening the Paper Layout on some large reports but ONLY on the following platforms:
     Microsoft Windows XP Professional
     Microsoft Windows Server 2003
Reports Builder displays the below message and then crashes:
Reports Builder
Reports Builder has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.
To see what data this error report contains, click here.
[Send Error Report] [Don't Send]
--> click on [Don't Send] button and Report Builder disappears.
-and/or-
access violation in oranls10.dll
This problem does not reproduce on:
     Microsoft Windows 2000
The solutions in the below note do not work on v. 10.1.2.2.0 and 10.1.2.3.0:
Note 361206.1 Title: Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Changes
Upgraded to Oracle Report Builder v. 10.1.2.x.x from a previous release.
Cause
Bug 7014048 is fixed in one-off Patch 5335195 (Base Bug) but missed inclusion (ie. was not ported to) in latest Developer patchset v. 10.1.2.3.0
See also:
Bug 7014048 Abstract: REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Bug 5029530 Abstract: REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Solution
To implement the solution, please execute the following steps:
1. Download one-off Patch 5335195 for v. 10.1.2.0.2 to the XP/2003 box.
2. Back up existing uiw.dll for 10.1.2.3 880KB 10/10/2006 7:23PM --> uiw_orig_10.1.2.3.zip
3. In the %ORACLE_HOME%\bin directory, replace uiw.dll (880KB) with the uiw.dll (1,316KB) from
Patch 5335195 --> 1,316KB 7/24/06 11:12PM
4. Re-launch Report Builder 10.1.2.3.0 on XP/2003.
5. Open the <large report>.rdf.
6. Double-click on the Paper Layout icon.
7. The result should be: Successfully open the Paper Layout for <large report>.rdf.
References
Bug 5029530 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL ONLY ON XP BOX
Bug 7014048 - REPORTS BUILDER CRASHES OPENING A PAPER LAYOUT.
Note 361206.1 - Reports Builder Crashes Opening a Paper Layout on Windows XP Only
Patch 5335195 - REPORTS BUILDER CRASHES OPENING PAPER LAYOUT MODEL DUE TO ACCESS

Export op results in error "EXP.EXE has encountered a problem and needs to

I have been working with Oracle Designer on an old computer (running Windows 2000 and an Oracle 10.2 database) and I am attempting to get it to run on a newer computer (running Windows XP and an Oracle 11g database (release 11.1.0.6)). Regarding the Designer version, I installed the same version (9.0.4.3) that was running on the old computer. On the new computer, features of the tool have worked (ER Diagrammer, DB Design Transformer, Design Editor), but the Export operation of the Repository Admin Utility did not work. When I attempted to run Export, the following happened:
(1) The "Save As" dialog was displayed (as expected).
(2) A EXP.EXE script window opened for the Export command and displayed the following:
Export: Release 9.0.1.5.1
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
(3) Immediately, an error dialog appeared stating "EXP.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
I am testing Export so that I can test Import, which is the operation I will need to load data from the old computer.
Any ideas how to fix this problem?
If it can't be fixed, are there other ways of transferring data from one repository installation to another?

add the 11g client to the pc and then modify the registry so that it points to the imp and exp from the 11g client.

AS 10gR1 vs "Apache.exe has encountered a problem and needs to close" on XP

I would really appreciate if somebody has solution for Windows error message popup box
"Apache.exe has encountered a problem and needs to close".
I have installed Oracle Application Server 9.0.4 Infrastructure (from 10gR1 AS) on XP laptop (I know it is unsupported)
opmnctl.exe status show "UP" status for OID,OC4J but "Down" for HTTP_Server
When I try to run
opmnctl.exe versbose startproc ias_component=HTTP_Server
I will always get "result=failure", text="failed to start a managed process after the maximum retry limit"
and Windows message popup box
"Apache.exe has encountered a problem and needs to close".
(I have also 9i and 10g installed in separate Oracle homes).

I have made 3rd attempt to re-install AS due "Apache.exe has encountere..and must be closed" error.
I have succeeded after doing following:
- unistall previous AS 9.0.4 (10gR1) install
- disabled McAffee and firewall
- changing NLS_LANG=AMERICA_AMERICAN.WE8ISO8859P15 prior installation
- removed path to other OH (9i and 10gR2)
- restart XP laptop
- doing install AS 9.0.4 (10gR1)
Now opmnctl.exe status shows everything works (including HTTP_Server :)

Java.exe has encountered a problem and needs to close.

I installed Oracle8i on my P4 then when I reboot I get the error "java.exe has encountered a problem and needs to close." even if I click on "don't report" if keeps popping up, anything to do to resolve this?
Thanks.

Hello...
i had the same problem. then when i searched oracle documentation, it suggested as follows:
1. go to your %ORACLE_HOME%\Apache\Apache\conf\httpd.conf
2. comment out 2 lines that has
include ....\jserv.conf
include ....\oracle_apache.conf
so your new line will be:
#include ....\jserv.conf
#include ....\oracle_apache.conf
Those lines are at the end of the file.
3. save the file.
4. reboot your machine.
that solution works for me.. hope it works for you too.
GOOD LUCK!
--Melani

Oracle sql*plus encountered a problem and needs to be closed

Similar Messages

Maybe you are looking for