Oracle SSL Cert for downloads has errors

Not sure if this is a cause or effect?
Owner: This web site does not supply ownership information.
Verified by: Not specified
I get this after clicking download link and failure of user/pass prompt.
Edited by: user6774993 on Jan 18, 2010 9:26 PM

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

Similar Messages

Using internal SSL Certs for Webview and Reskill (ICM 7.2.X)

Hi,
I would like to use corporate ssl certs for webview and reskill to avoid the user having to install the self signed certificate on the local machine. Has anyone any experience of this? Can it cause any unforseen problems?
My plan for webview is to create the certificate request in IIS for the default website, use this csr to generate the cert, then complete it by uploading the certificate.
For reskilling, I will assume I will have to do some command line stuff here ...
eg: keytool -genkey -keyalg RSA -keystore hostname.key
to create the key,
keytool -certreq -keyalg RSA -keystore hostname.key -file hostname.csr
to create the csr, and
keytool -import -trustcacerts -alias tomcat -file hostname.cer -keystore hostname.key
to import the new cert
Suggestions or comments for anyone who has tried this before would be appreciated.
Regards,
Brian

I've never done it on a version so old, but at the end of the day it's just IIS and Tomcat and importing an SSL cert is very standard.
david

How to setup SSL cert for SharePoint apps in a three tier farm with nlb

I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

After install of 10.0 I get "unable to check for download , unknown error 3603

after I installed ver 10 of Itunes,
I get "unable to check for download , unknown error 3603"
Now I can not get to my downloads at all

Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
http://www.apple.com/itunes/
If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
Windows is notorious for having "other" issues that make it unstable, we as volunteers helping others can't always resolve those issues.

Oracle instant Client and unixODBC for Linux has Error

Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.

Apologies - thought it was a database to database connection that you were trying to create.
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directoryThe readline library is in package readline-4.3-13 on RHEL4 and in readline-5.1-1.1 for RHEL5 on my servers (minor version number are of course dependent on the kernel version used).
This is also not an ODBC or Oracle issue. It seems that isql is using rlwrap or similar - this requires the readline library. And possibly LD_LIBRARY_PATH to be set too.

SSL Cert for 2008 R2 Reporting Services that is installed on a Failover Cluster - server address mismatch?

I utilized the idea from
http://www.mssqltips.com/sqlservertip/2778/how-to-add-reporting-services-to-an-existing-sql-server-clustered-instance/ to install 2008 R2 Reporting Services on a new Clustered SQL instance. In short, create the new Clustered SQL instance on Node1,
installing Reporting Services with it. Then on Node2, Add a Failover Cluster Node (without choosing Reporting Services); following that up with starting the SQL setup.exe with a cmd to bypass a check so that I can then install the Reporting Services
feature on Node2. It points out using the SQL Cluster Network name for connecting to Reporting Services.
I verified upon failover that I could still access the Reports and ReportServer URLs. However, when wanting to add an SSL certificate to the RS configuration, I run into the warning of "mismatched address - the security certificate presented by
this website was issued for a different website's address", where I can continue and get to the Reports or ReportManager URLs.
I played with different certs (internal CA created) and SANs and other things, but I still get this error with the cert. The Reports URL, for example, is <a href="https:///Reports">https://<SQLClusterNetworkName>/Reports, and the
cert has a CN and Friendly Name of SQLClusterNetworkName (with SAN of DNS: SQLClusterNetworkName.<domain>), but the error still happens.
What am I missing to eliminate the mismatched address warning when using the SQLClusterNetworkName as the base of the URLs?

I got it working by using the FQDN as the common name on the SSL cert, with FQDN in RS URLs.

WLC Virtual Interface config for a public SSL cert for Web Authentication

I'm trying to get a cert loaded on my 5508 WLC running 7.6.130.0 so when a Web-Auth users tries to authenticate they don't get the SSL cert error.
In the document "Generate CSR for Third−Party Certificates and
Download Chained Certificates to the WLC"
Document ID: 109597 it states the following
"Note: It is important that you provide the correct Common Name. Ensure that the host name that is
used to create the certificate (Common Name) matches the Domain Name System (DNS) host name
entry for the virtual interface IP on the WLC and that the name exists in the DNS as well. Also, after
you make the change to the VIP interface, you must reboot the system in order for this change to take
effect.
Here are my questions.
1. I have always had 1.1.1.1 as the address of the Virtual interface, should that change or can I leave it as 1.1.1.1?
2. In the "DNS Host Name" Field do I simply put the domain or the FQDN? Example. Company.com or hostname.company.com

Hi,
1) You can change that if you want. Normally it is non-Public and non-routable in your network.
2) Put the Host name for which you are going to give in your company DNS server where that Host name would be mapped to the Virtual ip address.
Regards
Dhiresh
** Please rate helpful posts**

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Next Build of Oracle XE Available for Download?

When will the next build of Oracle XE be available for download?
Currently I have a painful problem of being unable to import large HTML DB (2MB SQL files) Applications. I tried this thread:
Problem with importing HTML DB applications
However, it does not work for me and the problem seems so profound it probably requires a new build. In this current state, XE is not particularly useful for me... :(

We should have another Windows beta drop in a day or two. However this is only fixing some of the well known installation problems.
Can you please report the nature of your problem so we can see if there is a workaround, and also determine the correct fix ?

ACE: Single SSL Cert for two domains with same VIP

At present I have a design that will use individual SSL cert per domain and link both certs to (two or one) serverfarm.
policy-map multi-match popvip_01
class POP_VIP01
loadbalance vip inservice
loadbalance policy POP-POp3_PMT or popPMT1
loadbalance vip icmp-reply
ssl-proxy server GINPOP_SSLPROXY
connection advanced-options TCP_PARAM_Y
class POP3_VIP02
loadbalance vip inservice
loadbalance policy POP-POp3_PMT or POPPMT2
loadbalance vip icmp-reply
ssl-proxy server GINPOP3_SSLPROXY
connection advanced-options TCP_PARAM_Y
however,
if I can get one single certificate to process both pop and pop3 domains, that use the same VIP/port, and if this will work with ACE, i'm inclined to design using this alternative.
ie,
pop.mydomain.com = 10.10.10.1 995
pop3.mydomain.com = 10.10.10.1 995
Any suggestions would be appriciated.

Hello,
In order to achieve this then you will need to order a wildcard certifictae ie
*.mydomain.com
These certificates are more expensive and so you will probably find it cheaper to buy two certificates than one wildcard certificate.
Regards

Oracle project sent for approval has been cancelled due to timeout

Hi
OS RHEL 5.5
Database : 11.1.0.7
Applications R12
Oracle Project has created from the project template and has been sent for the approval has been cancelled due to timeout.
Please suggest what can be done to resend it to approval to the same person.
MONTHLY MAINTANENCE - SMPPL: Workplan (1)
Copyright (c) 2006, Oracle. All rights reserved.
Action History
Num Action Date Action From To Details
1 02-FEB-2013 13:11:22 Submit SHANKARE GOWDA, PRADEEP AGHALAYA RAO, Mr. NAGARAJ ACHYUTA
2 04-FEB-2013 13:12:46 Timeout APVR_PAWFPPWP22108 Workflow System
Rgrds,
Edited by: 955685 on Feb 4, 2013 8:24 AM

We're having trouble downloading also, but may finally have succeeded, just by trying over and over. Hard to tell. I'm at 22% of the download now.
Details:
I tried downloading JDeveloper 9i from the Web site but got an error. Is there a broken link at your Web site?
Details:
From: http://www.oracle.com/ip/develop/ids/
I clicked on:
"Only $995, or download free":
which took me to:
http://www.oracle.com/go/?&Src=1284591&Act=21
where I was properly recognized as:
Fred Stluka
because I had already logged in to OTN during that browser session.
Then I clicked on:
"FREE Oracle9i JDeveloper Software"
which took me to:
http://www.oracle.com/go/?&Src=1284591&Act=21&spv0=THX
Then I clicked on:
"Download Oracle9i JDeveloper"
which took me to:
http://otn.oracle.com/software/products/jdev/htdocs/soft.html
I checked the 5 boxes in the "ELIGIBILITY EXPORT RESTRICTIONS" section and clicked:
"I Accept"
which took me to:
http://otn.oracle.com/software/products/jdev/htdocs/soft.html
I clicked on:
"jdev9i_902.zip"
which tried to take me to:
http://download.oracle.com/otn/java/jdeveloper/jdev9i_902.zip
But this reported the classic IE error message:
"The page cannot be displayed
Cannot find server or DNS Error"
This is an intermittent problem. It failed many times in a row for me, but eventually succeeded.
--Fred Stluka

The new download has error 7 windows error 126?

what is going on? i get the same message failed to start because msvcr80.dll was not found. then something about apple mobile bla bla bla. i am not very tech minded at all and this problem is worrying me as i have nearly 3000 tracks in my library. these BETTER NOT VANISH. i can't back these up as i cant open itunes to do it. the step by step re install is a bit of a headache as half the time i do not know what I am looking for or what to delete. why is ther such a problem?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

OracleAS Portal Extension for Macromedia Dreamweaver errors

I have installed the .ear file and the extenstion into Dreamweaver without any problems.
I then created a Portal Template page and tried to save it to the Portal (Portal - Save As). Entering the Portal instance and testing this was ok but then when I try and save my new template to Portal I get an error:
"A local copy of the file must be present before uploading the Template to Portal. Would you like to save a copy now ?"
If I OK this I then get the following error:
"While executing onClick, the following Javascript error(s) occurred:
At line 443 of file c:\Program Files\Dreamweaver MX\Configuration\Commands\saveAsTemplate.js": The function closeDocument() is currently unavailable"
Any ideas ?
Anyone got this to work ?
Thanks
Simon.

Hi Simon
wrt to the "This Template was either not stored properly or defined incorrectly. This Template cannot be opened" error.
One of the probable causes for this error is when you define more than one portal connections with the same name or you define a portal connection with a name which has invalid characters and then save a template into that portal or try to open a template from that portal.
This error basically means that the web service is returning a null value or an undefined value for the template code. This could also be because of malformed template code.
Could you please check the following:
1. You have not defined more than one portal connections with the same name
2. You have not defined the portal connection with a name that has invalid characters.
3. Template does not have malformed code.
Hope this helps,
Ramya

Oracle database 7 for download

Dear all,
There's an oracle database 7 in my company. Because of company requirment , i need to upgrade it to oracle database version 10gR2. But we have only one DB ( no clustering) in our environment, so i think maybe installing an oracle DB 7 first to simulate exporting / importing data to oracle 9i is a safer solution. But i couldn't find the original oracle DB 7 install CD, could it be possible to download it from any website? Any help would be appreciated.
Best Regards.

An Oracle7 home is easy to clone. Just TAR the ORACLE_HOME from the source system and unTAR it at the target.
As long as the OS version is the same !
You must first :
a. create the Unix group and username with the same GID and UID (or you'll have to change them for the extracted directories and files with chgrp and chown if you can't create the same GID/UID)
b. create the same directory structure (if you have ORACLE_BASE defined in the source system, set that up as well)
c. create the .profile (or .cshrc) on the new server as the same as on the source server
d. ensure that Unix kernel parameters relating to SHM and SEM are setup on the new server
After extracting the ORACLE_HOME, you have to update the listener.ora and tnsnames.ora entries to reflect the new server hostname/ip address.
Access the Oracle7 7.3.4 documentation at
http://www.oracle.com/technology/documentation/oracle7.html
Hemant K Chitale
http://hemantoracledba.blogspot.com

Oracle SSL Cert for downloads has errors

Similar Messages

Maybe you are looking for