Oracle Streams and Oracle Apps  11i

Hi,
I am looking for an oracle solution to build a reporting instance off an e-business suite 11i and offload discoverer reporting to the reporting instance. I have tried dataguard logical standby but too many issues and I cannot use. I am wondering if anyone tried using oracle streams to build a reporting instance from an oracle apps instance?
Thanks

Hi,
Is Streams supported in an E-Business Suite database? We once had a scenerio where some parameters for Streams were conflicting with parameters required for E-Business Suite performance improvement. I could not find any documents from Oracle to verify whether Streams on E-Business Suite database was a supported configuration or not.
So if you have any such document, could you send the link to me?
Also please provide the link to your white paper/presentation.
Regards,
Sujoy

Similar Messages

  • Differenece between oracle streams and oracle Replication

    Hi all,
    Can anyone tell me difference between oracle streams and oracle replication?
    Regards

    refer the link:Difference Between Oracle Replication & Oracle Streams.
    Oracle Replication is designed to replicate exact copies of data sets to various databases. Oracle Streams is designed to propagate individual data changes to various databases. Thus, Replication is probably easier if the end goal is to maintain identical copies of data, where Streams is easier if the end goal is to allow different databases to react differently to data changes.
    Oracle Replication is a significantly more mature product-- it is quite usable with older databases. Oracle Streams is a much newer technology and is only usable among different 9i databases. Most competent Oracle developers and DBA's are familiar with Oracle Replication, while many fewer have any real experience with Streams.
    The Streams architecture strikes me as a lot more flexible than Oracle Replication's. This leads me to suspect that Oracle will be pushing Streams over Replication in subsequent releases, so I would expect new features in Streams, like DDL changes, that aren't in Oracle Replication. Realistically, though, I don't expect any serious movement away from Replication for at least a few releases, so I wouldn't tend to be overly concerned on this front.
    answered by Justin
    Distributed Database Consulting, Inc.
    reference from forum thread:
    Difference Between Oracle Replication & Oracle Streams.

  • What is Oracle Apps and Oracle Financials and Oracle 11i.

    Hi All,
    right now I am working on Oracle PL/SQL stored procedures (Version 8) wants to learn/shift to Oracle Apps. Dont know actually what is what and what are the Differences between Oracle Apps and Oracle Financials and Oracle 11i
    Can any one brief me about those.
    Thanks in Advance
    [email protected]

    What exactly are you intending to do to Oracle Apps ? You suggest you are a developer, but Oracle Apps are already developed, by Oracle. Do you want to develop peripheral applications, or become an administrator, or what ?

  • Need help -- Oracle Financial 11i vs r12 (Oracle Payable and Oracl Payment)

    Dear all
    I'm newbie in Oracle Application and request for your help to answer my questions.
    Background:
    Three years ago, my company was planning to implement ERP Oracle Financials.
    To facilitate the plan, an open bidding was established to find the best implementing company with affordable price.
    The bidding document was created when Oracle Financials was 11i.
    When the contract was signed 2 years ago, by my company and the winning company, it is mentioned that the version installed must be the latest one.
    At the response to requirements, the winning company stated that the payment activity will be facilitated by Oracle Payable.
    Now, the project is going on and the Oracle has the r.12 version.
    Problem:
    At 11i, there was only one module related to payment activities, i.e. Oracle Payable.
    At r.12, Oracle has a new modul, i.e. Oracle Payment, which was subdomain of Oracle Payable.
    Question:
    1. Is my opinion about the relationship between Oracle Payable and Oracle Payment above correct?
    2. Does my company has its right to ask for Oracle Payment in the installation?
    3. If the answer to number 2 is yes, what is the base for it?
    Thank you for explanation.
    Sorry if I raise a too-simple question.
    Regards,
    Dodydh
    Edited by: 840286 on 28-Feb-2011 03:28

    Hi Dodydh,
    I am afraid, your statement 'At r.12, Oracle has a new modul, i.e. Oracle Payment, which was subdomain of Oracle Payable.' is not correct.
    Oracle Payments is an upgrade version of Oracle iPayments of 11i and this module is expected to serve Self service modules. But Payment Batches which is part of Oracle Payables has been moved to Oracle Payments.
    You can very well ask them to implement Payment Batches (Processes relating to Funds Disbursement) but not the entire module.
    Please let me know if you require further info.
    Regards,
    Sridhar

  • Setup between Oracle streams and MQ

    Hi All,
    I m trying to create the setup between oracle streams and Messing Queue(MQ).i have already install MQClient on my machine and messing gateways is also working fine,but accoring to setup docs i have created one user having all the granst they provide in docs and created queuetable,queue,dml handler,tables rules and starting queue after that we have done Capture and Apply process on that user, in other word u have say the entire setup but our data is not propagating that messaage to MQ.
    So if anyone has specific setup code then pl provide or any suggestion u want can give.
    thnks & regards
    Sanjeev

    Hi Sanjeev,
    There is a special forum dedicated to Oracle Streams: Streams
    You may want to try there.
    Extra tip: post the code you used. That way it is easier for people to see what you might have done wrong.
    Regards,
    Rob.

  • Oracle Streams and Dataguard

    Does anyone know how to configure oracle streams and dataguard to work together? I've set up an environment which successfully captures and applies records in a streams environment using
    log_archive_config=SEND, RECEIVE, NODG_CONFIG
    as soon as I try to introduce the streams setup into a database which already has dataguard setup it begins to get convoluted as setting DG_CONFIG requires you to then set the db_unique_name and it seems that the streams log mining will not work without being fully incorporated into the Dataguard configuration.
    Has anyone set up streams in a dataguard environment?

    Lets see what's missing from your request:
    1. Oracle version number?
    2. Physical or logical Data Guard?
    3. Which Data Guard mode? Synch or Asynch?
    4. Which Data Guard protection level?
    5. ARCH or LGWR?
    6. Which streams mode? Synch or Asynch?
    7. Hotlog or Autolog?
    8. Streams on the production server or the standby server?
    I'm all out of guesses tonight. Please provide enough information for someone to help you.

  • Conflict between oracle 8 and oracle 11

    Hi,
    I'm having a problem installing oracle 8 and oracle 11 homes at the same time. It looks like the system can only recognize one of the homes. I have 2 different applications running in the same computer. One of them uses oracle 11 and the other oracle 8. The problem is, the one with the oracle 8 can't recognize it, and tries to use the 11, saying it doesn't support the connection. I've checked the registry info and it looks like there is only one Home specified. Should I create a new one? More over, when i use the home selector it says there's only one home available.

    872175 wrote:
    Yea they are, I even tried to use a script similar with:
    SET PATH=D:\ora11\product\11.2.0\client_1\BIN;%PATH%
    D:
    cd "app_folder"
    app.exe
    EXIT
    to make sure the variable with be the correct when we tried to open the application. I can use the application linked to the oracle 11 but, when i try to get in the other it gives me the following error:
    The procedure entry point orasql10.sqlxss could not be located in the dynamic link library orasql8.dll.When you change the environment variables in a command line window (run cmd.exe), the changed variable values only exist in that command line window, but those environment variables are inherited by other programs started from the command line window. If the Oracle 8i client is normally listed first in the PATH environment variable, and you want to execute another program that requires the 11g client, you will need to repeat the above steps for the second program.
    You can use a program named Dependency Walker to see which DLL files will be accessed by a program (or even a DLL such as ORASQL10.DLL). In the case of a DLL, you would be able to determine if a specific function name sqlxss (ordinal 183 in this case) exists in that DLL. The Dependency Walker program typically ships with Microsoft's development environments. You can find out more about that program here:
    www.dependencywalker.com
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Capture Changes from Sql Server  using Oracle Streams  - Destination Oracle

    Is it possible to capture changes made to tables in Sql Server database and propagate the changes to Oracle Database using Oracle Streams and Heterogeneous Gateway. I see plenty of information about pushing data from Oracle to Sql server, but I haven't been able to find much information about going the other way. Currently we are using sql server 2005 replication to accomplish this. We are looking into the possibility of replacing it with streams.

    the brief understanding i have is that there is nothing out of the tin that Oracle provides to stream between SQL Server and Oracle. The senario is documented in Oracle docs however and says you need to implement the SQL Server side to grabe changes and submit to Oracle stream queues.
    i'm sure i've seen third parties who sell software to do this.
    If you know otherwise please let me know. Also wasn;t aware one could push from SQL Server to Oracle. Is this something only avail in SQL Server 2005 or does 200 also have it? How are you doing this?
    Cheers

  • Oracle forms and Oracle reports for Oracle 9i

    Hello,
    I'm searching for Oracle forms and Oracle reports that works with Oracle 9i.
    Does someone know where I can find them?
    Thanks in advance...

    When we talk about Oracle9i, we often mean the database version 9i.
    Apparently you want to use Forms and Reports 9i, which included in the obsolete (and very unhappy) Application Server 9i. ... Or the also obsolete Application Server 10g Release 1 (aka App Server 9.0.4.
    You are encouraged to look at Forms and Reports 10g (part of the improved Application Server 10g) which does connect to Oracle Database 9i as well as Oracle Database 10g. Look for App Server 10g Release 2, version 10.1.2.0.2 and 10.1.2.2)

  • Select query differences between oracle 9 and oracle 8.

    Hi,
    I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
    ex:
    With oracle7
    SQL> select 'champ1','champ2' from DUAL;
    'CHAMP 'CHAMP
    champ1 champ2
    With Oracle 9
    SQL> select 'champ1','champ2' from DUAL;
    'CHAMP1' 'CHAMP2'
    champ1 champ2
    So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
    Thanx.

    Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
    This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
    My suggestion is -> First Go through the basics Of SQL in general.
    Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
    And, finally learn the advanced commands of that DB.
    You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
    Anyway,
    You can get the quite familier output by first type the following command ->
    set lin 310Regards.
    Satyaki De.

  • Oracle Spatial and Oracle Forms

    Hi,
    Does anyone have experience with Oracle Spatial and Oracle Forms?
    I have generated a form, which is based on a view. The view uses the mdsys.sdo_relate operator. Somehow I am unable to get the form to perform (to get one record it takes over 20 minutes). While useing sql-navigator to process the same statement it seems no problem. The query that also uses the view, is then processed in 10 seconds.
    I also noticed that when text-functions like ' lower' of ' upper' are used to query the view, the query is processed within 15 seconds. If I don't use ' lower' or ' upper' it takes a long time (> 20 minutes) to process the query. Is it possible that this causes the bad performance of the form?
    On metalink I have found that forms and spatial do not cooperate because of the pl/sql version that
    forms6 uses. There is no solution presented, does anyone know of a work around?
    My configuration is:
    Oracle 8.1.7 on WIN2K @ PIII-800Mhz 256 Mb memory.
    Formsbuilder 6
    If requested I can post the queries that I have made.
    With regards,
    Gerjan Walrecht
    [email protected]
    null

    Hello Priya,
    Look into the following.
    1. Book - Pro Oracle Spatial for Oracle Database 11g by r. Kothuri, A. Godfrind, E. Beinat. This book provides a nice introduction on Oracle Spatial concepts and have examples.
    2. Look at the Oracle Spatial & Graph User Guide
    2. Book - Applying and Extending Oracle Spatial by S. Greener and S. Ravada. This book provides hands on information for advanced oracle spatial application developers. Practical guide on hands-on examples, Data models and  develop cross-vendor database solutions.
    3. This oracle spatial forum, once you understand these concepts.
    In the future consider Certification on Oracle Spatial 11g Certified Implementation Specialist.
    Best
    Navaneet

  • What are the major differences between oracle 10g and oracle express 10g

    Hi
    Can anyone tell, What are the major differences between[b] oracle 10g and oracle express 10g.
    Or if you know any URL, then please do let me know.
    Advance Thanks
    JC

    Dear sir,
    here it is.
    http://www.oracle.com/database/product_editions.html

  • Differences in NLS_LANGWE8ISO8859 between Oracle 8i and Oracle 9i or higher

    Are there any differences in NLS_LANG WE8ISO8859P1between Oracle 8i and Oracle 9i or higher?
    please, there is a document that explains what.
    thank you very much.

    Ok,      
    I want to know whether there was any difference when using this NLS_LANG between 8 and oracle 9.
    I read many documet about unicode, but i want to know this question.
    If NLS_LANG is a standard there isn´t changes between the to versions.

  • Is it possible to import and export dump between oracle 9 and oracle 11?

    Is it possible to import and export dump between oracle 9 and oracle 11?
    Source DB : Oracle 11g(unix0
    Oracle client : Oracle 9(Windows)
    Export import utility : Oracle 9's
    Destination DB : oracle 9

    I am getting the Following Error and export utility is not responding after this.
    Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    server uses AL32UTF8 character set (possible charset conversion)

  • Differences between Oracle BAM and Oracle BI and Question BAM  Data Objects

    Hi,
    I have two questions.
    1. Can someone tell me differences between Oracle BAM and Oracle BI?
    My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
    We can also build DashBoards or reports using Oracle BI.
    I am not able to understand why Oracle has two tools for same purpose?
    Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
    2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
    My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
    I am wrong pl correct me?
    Regards,
    Shanti Nagulapalli.

    Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
    refer here,
    http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
    http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
    http://www.compuworks.com/events/view/233.pdf
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
    Thanks

Maybe you are looking for