Oracle Streams - Error ORA-26786,ORA-26787
Good day to all,
I wish someone can help me in Oracle Streams, scoring to identify the following error in the Target with dba_apply_error:
ORA-26786: A row with key ("RECKEY") = (1) exists But you have conflicting column (s) "ULT_NRO" in table PROD2.NUM_TRANSACCIONES
ORA-01403: no data found
This makes many of my tables in the destination are desynchronized. Moreover also I have cases where I get the ORA-26787 which has the following definition:
ORA-26787: "The row with key% s does not exist in table% s"
The BD I have in the Source is a 11gR2 EE and target is 11g R2 Edition One is only pasive and the source database is active.
Hopefully I can help me,
I hope your comments.
Thank you.
Hi,
Well, I have to tell you I tried implmentar the Streams with parallelism 1, however I keep getting the same error.
ORA-26787: The row with key ("ANO", "CAPITAL_AMORTIZADO", "CAPITAL_APROBADO", "CAPITAL_DESEMBOLSADO", "CAPITAL_VENCIDO", "CREDITO", "CUOTAS_ATRAZADAS", "DIAS_MOROSIDAD_HOY", "DIAS_MOROSIDAD_PROY", "FECHA_ULTIMA_CAP", "FECHA_ULT_MOV", "FECHA_VENCIMIENTO", "FLAG_ESTADO_ANT", "FLAG_ESTADO_CRED", "GARANTIA_CANT", "GASTO_COBRANZA", "ID_AGENCIA", "INTERES_ACUM", "INTERES_COMP_PROY", "INTERES_MOR_PROY", "INTERES_PROY", "MES", "NRO_PROCESO", "OTRO_CARGO", "PAGO_INTERES", "PRODUCTO", "SALDO_GARANTIA", "SECTORISTA", "TASA") = (2012, 857508.04, 45000, 858078.39, 570.35, 2002000321, 1, 2858, 2880, 2004-04-13:00:00:00, 2004-04-13:00:00:00, 2004-01-14:00:00:00, 1, 7, , 230, 0002, 0, 4481.53, 651.6, 0, 2, 1, 0, 13144.13, 268 , 0, dfigue, 31.37) does not exist in table PROD2.CREDITO_SALDO_PRYCTDO
ORA-01403: no data found
ORA-26786: A row with key ("ITEM") = (2) exists but has conflicting column(s) "FCHA_ULT_PROC", "FLAG_PRCSO", "HORA_FIN", "HORA_INI" in table PROD2.CIE_PROYCCION_PRVSION
ORA-01403: no data found
It's good to tell you also that once the error occurs, I proceed to stop the apply, then to erase the mistakes and finally start the application in the destination, and thus gradually disappear errors and re-based sincornizar destination data, however this is constant.
Is due to some configuration I'm missing?
Thanks for your opinions.
Regards.
Similar Messages
-
ERROR: ORACLE prepare error: ORA-00936: missing expression
Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153 biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163 )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85 library = rosdwp nolist;
86 delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90 library=work nolist;
91 copy out = rosdwp move;
92 select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105 execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155 BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM -
Not able to Start the oracle db error "ORA-01031: insufficient privileges"
Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishnayes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh -
Adding a field to an sql statement in Oracle Reports error ORA-00933
We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
p.full_name_lfmi name,
p.BIRTH_DATE, p.GENDER Sex,
Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
a.academic_period TERM,
CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
ELSE ' '
END AS Program,
a.COLLEGE, a.degree, a.major, ' ' rule,
a.STUDENT_POPULATION,a.STUDENT_LEVEL, a.application_status Status, a.application_status_date app_sts_dte,
ad.decision_date1 Last_Dec_Date,
ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
/* Deposit Date uses the last term entered in :p_term parameter string */
(SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid) AS "DEPOSIT DATE",
ph.phone as PHONE,
CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
ELSE ' '
END
END AS FIRST_CONTACT,
DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
AND a.curriculum_priority = 1
AND a.person_uid = ps.person_uid
AND a.person_uid = ad.person_Uid(+)
AND a.person_uid = goremal_pidm(+)
AND a.person_uid = adr.pidm(+)
AND a.person_uid = ph.pidm(+)
AND ph.rnum(+) = 1
AND a.person_uid = c.person_uid(+)
AND a.academic_period = c.academic_period(+)
&Where_Clause
/* TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
AND NOT(p.id_number = '00000000' OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
AND a.academic_period = ad.academic_period(+)
AND a.application_number = ad.application_number(+)
AND a.degree <> 'ND' /* AND a.college <> 'LW' -- Does not need non-degree and law students */
&Cohort_Clause
ORDER BY Program &ORDER_CLAUSEHi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all. -
Hi All,
When I tried to create a java source in Oracle 8i , it gave me an error like this.
ORA-29547: Java system class not available: oracle/aurora/rdbms/Compiler
Can anybody help me to sort out the problem.
Is there anything to be set for creating java source inside oracle database. I tried it from scott/tiger authentication.
Thanks in advance.
RajeshHi Michel,
Thanks for the reply. I have one more doubt , Is it like the normal classpath setting that we do for java programs?
Since the java is a built in for Oracle 8i , do the oracle database set the classpath while it's being installed ?
Thanks
Rajesh
null -
Oracle internal error ORA-00600
hi,
I have 2 schema which a have a 2 triggers that copy data between 2 tables
schema1.tablea and schema2.tableb. Both table structures are similar with a primary key of pcode.
I am running into the following error.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> update abc set pcode=pcode;
update abc set pcode=pcode
ERROR at line 1:
ORA-00600: internal error code, arguments: [kohdtf048], [], [], [], [], [], [],
ORA-04088: error during execution of trigger
'schema.abc_TRG'
ORA-06512: at "schema.xyz", line 78
ORA-04088: error during execution of trigger
'schema.xyz'
could some one please help.
I have already tried analyzing tables, rebuilding indexes, bumping up the dbf files
but it has not help.
Could some one help outRefer to Note:139116.1 and open an SR.
-
Oracle 8i Error ORA-01996 when adding user
When trying to add a user in Oracle 8i I get the following message...
"ORA-01996: GRANT failed: password file 'C:\oracle\ora81\DATABASE\PWDacuisp.ora is full"
Does anyone know if there is parameter setting that needs to be adjusted? The file size of PWDacuisp.ora is 2kb... I am confused!
Thanks for your help!
DerekHi,
You'll have to use the orapwd utility to do so. Check the doc(click) for full reference.
Regards,
Yoann. -
Oracle 11g - Error ORA-22275: invalid LOB locator specified
Getting error during oBlob.freeTemporary() as
clearBlobValues() throws Exception
oracle.sql.BLOB oBlob = oset.getBLOB(i);
oBlob.freeTemporary();
I googled this error and get some solution
"Cause: There are several causes: (1) the LOB locator was never initialized; (2) the locator is for a BFILE and the routine expects a BLOB/CLOB/NCLOB locator; (3) the locator is for a BLOB/CLOB/NCLOB and the routine expects a BFILE locator; (4) trying to update the LOB in a trigger body -- LOBs in trigger bodies are read only; (5) the locator is for a BFILE/BLOB and the routine expects a CLOB/NCLOB locator; (6) the locator is for a CLOB/NCLOB and the routine expects a BFILE/BLOB locator;
Action: For (1), initialize the LOB locator by selecting into the locator variable or by setting the LOB locator to empty. For (2),(3), (5) and (6)pass the correct type of locator into the routine. For (4), remove the trigger body code that updates the LOB value."
but not sure how to go about this. Can anyone lends a helping hand?
Thanx in advance
Edited by: user13503846 on Sep 7, 2011 10:16 AMYou should try to post a small but complete example that allows to reproduce the issue with:
1. your 4 digits Oracle version (client and server)
2. the language you are using. -
Hi there!
Can somebody help me on this issue???. I've been getting this error several times this week, but I can't find any solution. I've read many stuff about it, but all of them are about "OS issues".
Does anybody know something different, or at least passed the same situation?.
AlexDear One
You have not mentioned the os? Unix or Windows.
If unix which flavour.
If unix then you have to tune the kernel paramaters to accmodate the sGA.
As i do not know which flavour you are using otherwise i would have told you the commands.
Minimise the no of process parameters to less number than the current one. and test.
Revert back if not working.
Nikhil
Vadodara -
Why is this not Supported :
How can i create a non-buffered queue ?ß
BEGIN
DBMS_CAPTURE_ADM.ALTER_CAPTURE(
capture_name => 'capture_demo',
start_scn => 1211212) ;
end;
ORA-25302: Operation not possible for non-buffered queue STRMADM.STREAMS_QUEUE
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1721
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 3562
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_CAPTURE_ADM_INTERNAL", line 54
ORA-06512: at "SYS.DBMS_CAPTURE_ADM", line 124
ORA-06512: at line 2
Thanks in advance.You should create a buffered queue to be able to do this.
I did something like this :
-- queue name and table name should not exceed 24 characters
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE(
queue_table=>'logrep$_lchanges_qtab',
queue_payload_type=>'sys.anydata',
multiple_consumers => true,
comment => 'Queue table', compatible => '8.1.3');
END;
BEGIN
DBMS_AQADM.CREATE_QUEUE(
queue_name=>'queue1',
queue_table=>'logrep$_lchanges_qtab',
comment => 'Queue1');
END;
-- start the queue
EXECUTE dbms_aqadm.start_queue (queue_name=>'queue1');
EXECUTE sys.dbms_aqadm_sys.add_buffer (queue_name=>'queue1', memory_threshold=>3000000);
Chandar -
DUAL causes internal error ORA-00600
Hi All,
I am using oracle 10g database agains Forms6i, but in forms pl/sql when ever and where ever I use the DUAL in select statement
i.e. SELECT sysdate INTO <variable> FROM DUAL;
it always causes oracle internal error ORA-00600 ?
However it the dual statement works fine in SQL Plus console.
Any knows anything about this problem.
Any help will be highly appriciated. Thanking you and Best Regards.Please go to the first reply above:
Only the newest patch 17 runs against 10g databases without problems.
Either upgrade to Forms 6.0.8 and apply patch 17, or else connect to an Oracle 8 or 9i database. -
EXPDP got error ORA-39014,ORA-39029 in oracle 10.2.0.4
oracle database = 10.2.0.4
OS= Oracle enterprise linux 4.8
after run expdp file i got the following error:
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31671: Worker process DW01 had an unhandled exception.
ORA-24795: Illegal ROLLBACK attempt made
ORA-06512: at "SYS.KUPW$WORKER", line 1352
ORA-24795: Illegal ROLLBACK attempt made
ORA-06512: at "SYS.KUPW$WORKER", line 7073
ORA-24795: Illegal ROLLBACK attempt made
ORA-06512: at "SYS.KUPW$WORKER", line 2829
ORA-24795: Illegal ROLLBACK attempt made
ORA-24795: Illegal ROLLBACK attempt made
ORA-06512: at "SYS.KUPW$WORKER", line 10915
ORA-02354: error in exporting/importing data
ORA-39773: parse of metadata stream faile
how could i solve my problm????
help meuser12189421 wrote:
ulimit -n
131072
lsof | grep oracle | wc -l
2332
cat /proc/sys/fs/file-nr
2520 0 357686In that case you need to check with your system admin.
Error: ORA 447
Text: fatal error in background process
Cause: One of the background processes completed unexpectedly.
Action: Restart the system.
Check and, if necessary, correct the problem indicated by the
background trace file in BACKGROUND_DUMP_DEST.
*** Important: The notes below are for experienced users - See Note:22080.1
Diagnosis:
- Check the alert log and trace files for all trace files around
the time of the error. It is common for one trace to point at another
process. Follow the list until you get a file with a real
error in it. If unsure collect ALL trace files.
- If all traces point to a process with no tracefile (Eg: LGWR)
check whether any new tablespaces or datafiles have been added
recently
Check whether sum(number of datafiles +
number of redolog files +
number of controlfiles)
is less than
(user's unix open file limit. eg. nfile on SUN,
maxfile on HP)Regards
Anurag -
Oracle Streams 'ORA-25215: user_data type and queue type do not match'
I am trying replication between two databases (10.2.0.3) using Oracle Streams.
I have followed the instructions at http://www.oracle.com/technology/oramag/oracle/04-nov/o64streams.html
The main steps are:
1. Set up ARCHIVELOG mode.
2. Set up the Streams administrator.
3. Set initialization parameters.
4. Create a database link.
5. Set up source and destination queues.
6. Set up supplemental logging at the source database.
7. Configure the capture process at the source database.
8. Configure the propagation process.
9. Create the destination table.
10. Grant object privileges.
11. Set the instantiation system change number (SCN).
12. Configure the apply process at the destination database.
13. Start the capture and apply processes.
For step 5, I have used the 'set_up_queue' in the 'dbms_strems_adm package'. This procedure creates a queue table and an associated queue.
The problem is that, in the propagation process, I get this error:
'ORA-25215: user_data type and queue type do not match'
I have checked it, and the queue table and its associated queue are created as shown:
sys.dbms_aqadm.create_queue_table (
queue_table => 'CAPTURE_SFQTAB'
, queue_payload_type => 'SYS.ANYDATA'
, sort_list => ''
, COMMENT => ''
, multiple_consumers => TRUE
, message_grouping => DBMS_AQADM.TRANSACTIONAL
, storage_clause => 'TABLESPACE STREAMSTS LOGGING'
, compatible => '8.1'
, primary_instance => '0'
, secondary_instance => '0');
sys.dbms_aqadm.create_queue(
queue_name => 'CAPTURE_SFQ'
, queue_table => 'CAPTURE_SFQTAB'
, queue_type => sys.dbms_aqadm.NORMAL_QUEUE
, max_retries => '5'
, retry_delay => '0'
, retention_time => '0'
, COMMENT => '');
The capture process is 'capturing changes' but it seems that these changes cannot be enqueued into the capture queue because the data type is not correct.
As far as I know, 'sys.anydata' payload type and 'normal_queue' type are the right parameters to get a successful configuration.
I would be really grateful for any idea!Hi
You need to run a VERIFY to make sure that the queues are compatible. At least on my 10.2.0.3/4 I need to do it.
DECLARE
rc BINARY_INTEGER;
BEGIN
DBMS_AQADM.VERIFY_QUEUE_TYPES(
src_queue_name => 'np_out_onlinex',
dest_queue_name => 'np_out_onlinex',
rc => rc, , destination => 'scnp.pfa.dk',
transformation => 'TransformDim2JMS_001x');
DBMS_OUTPUT.PUT_LINE('Compatible: '||rc);
If you dont have transformations and/or a remote destination - then delete those params.
Check the table: SYS.AQ$_MESSAGE_TYPES there you can see what are verified or not
regards
Mette -
Streams Capture Error: ORA-01333: failed to establish Logminer Dictionary
I get the following error:
ORA-01333: failed to establish Logminer Dictionary ORA-01304: subordinate process error. Check alert and trace logs ORA-29900: operator binding does not exist
when the capture process is started. I am trying to get[b] schema to schema replication going within a Database. I have tried a few different scripts to get this replication going for the EMPLOYEES table from a HR to HR2 schemas which are identical.
One of the scripts I used is given below.
If anyone could point out what could be possibly wrong? or what parameter is not set it would be greatly appreciated. The database is Oracle 11g running in ARCHIVELOG Mode.
CREATE TABLESPACE streams_tbs
DATAFILE 'C:\app\oradata\stream_files\ORCL\streams_tbs.dbf' SIZE 25M;
-- Create the Streams administrator user in the database, as follows:
CREATE USER strmadmin
IDENTIFIED BY strmadmin
DEFAULT TABLESPACE streams_tbs
TEMPORARY TABLESPACE temp
QUOTA UNLIMITED ON streams_tbs;
-- Grant the CONNECT, RESOURCE, and DBA roles to the Streams administrator:
GRANT CONNECT, RESOURCE, DBA
TO strmadmin;
--Grant the required privileges to the Streams administrator:
BEGIN
DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE(
grantee => 'strmadmin',
grant_privileges => true);
END;
--Granting these roles can assist with administration:
GRANT SELECT_CATALOG_ROLE
TO strmadmin;
GRANT SELECT ANY DICTIONARY
TO strmadmin;
commit;
-- Setup queues
CONNECT strmadmin/strmadmin@ORCL
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE();
END;
--Capture
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES(
table_name => 'HR.EMPLOYEES',
streams_type => 'capture',
streams_name => 'capture_stream',
queue_name =>
'strmadmin.streams_queue',
include_dml => true,
include_ddl => true,
inclusion_rule => true);
END;
--Apply
BEGIN
DBMS_STREAMS_ADM.ADD_TABLE_RULES(
table_name => 'HR2.EMPLOYEES',
streams_type => 'apply',
streams_name => 'apply_stream',
queue_name =>
'strmadmin.streams_queue',
include_dml => true,
include_ddl => true,
source_database => 'ORCL',
inclusion_rule => true);
END;
--Start Capture
BEGIN
DBMS_CAPTURE_ADM.START_CAPTURE(
capture_name =>
'capture_stream');
END;
--Start the apply Process
BEGIN
DBMS_APPLY_ADM.SET_PARAMETER(
apply_name => 'apply_stream',
parameter => 'disable_on_error',
value => 'n');
END;
BEGIN
DBMS_APPLY_ADM.START_APPLY(
apply_name => 'apply_stream');
END;
Any suggestions?From what I can understand from the Alert logs and the trace is that some how the Oracle is not able to allocate new log and also it cannot load library SYS.XMLSEQUENCEFROMXMLTYPE.
I logged into the EM and tried to log for issues, under the recovery settings it showed 100% of the allocated space being used for the ARCHIVE_LOGS. I'm trying to change that and restart the database server and see if I can get it to work.
Here are some of the extracts from the alert log:
Logminer Bld: Done
STREAMS: dictionary dumped, now wait for inflight txn
knlciWaitForInflightTxns: wait for inflight txns at this scn:
scn: 0x0000.008905a3
[8979875]
knlciWaitForInflightTxns: Done with waiting for inflight txns at this scn:
scn: 0x0000.008905a3
[8979875]
Thread 1 cannot allocate new log, sequence 417
Checkpoint not complete
Current log# 2 seq# 416 mem# 0: C:\APP\ORADATA\ORCL\REDO02.LOG
Thu May 22 09:04:45 2008
Thread 1 advanced to log sequence 417
Current log# 3 seq# 417 mem# 0: C:\APP\ORADATA\ORCL\REDO03.LOG
Thu May 22 09:04:45 2008
Logminer Bld: Build started
Thread 1 cannot allocate new log, sequence 418
Checkpoint not complete
Current log# 3 seq# 417 mem# 0: C:\APP\ORADATA\ORCL\REDO03.LOG
Thread 1 advanced to log sequence 418
Current log# 1 seq# 418 mem# 0: C:\APP\ORADATA\ORCL\REDO01.LOG
Thu May 22 09:04:48 2008
Logminer Bld: Lockdown Complete. DB_TXN_SCN is 0 8980165 LockdownSCN is 8980165
Thread 1 cannot allocate new log, sequence 419
Checkpoint not complete
Current log# 1 seq# 418 mem# 0: C:\APP\ORADATA\ORCL\REDO01.LOG
Thread 1 advanced to log sequence 419
Current log# 2 seq# 419 mem# 0: C:\APP\ORADATA\ORCL\REDO02.LOG
Thu May 22 09:04:57 2008
Thu May 22 09:04:57 2008
Logminer Bld: Done
AND then other part
rrors in file c:\app\diag\rdbms\orcl\orcl\trace\orcl_ms01_1500.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-29900: operator binding does not exist
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-907: cannot load library unit SYS.XMLSEQUENCEFROMXMLTYPE (referenced by SYS.XMLSEQUENCE)
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 83
ORA-06512: at line 1
LOGMINER: session#=601, builder MS01 pid=53 OS id=1500 sid=127 stopped
Thanks for your help. I'll post again if I still cannot get it to work. -
Oracle error ORA-01461when trying to insert into an ORACLE BLOB field
I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.
Maybe you are looking for
-
When I try to play a movie with mplayer I get this: $ /usr/bin/mplayer grudge_max.mov MPlayer 1.0pre6-3.4.3 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes
-
How to completly delete all AC 5.2 content from NW?
Dear all, We have just undeployed all 5.2 components in order to install version 5.3 (SP5). When deploying the new SCA files we get errors and it ends that just one out of four gets files deployed (AE), JSPM alterts that some objects already exists:
-
I can download itune setup file from apple.com but file is not opening and receive message file moved after downloading.
-
I am fairly new to using state machines and am hoping there is a simple solution to this question. I have one state machine that is saved (ie StateMachine1.ctl). I created a new state machine (StateMachine2.ctl) and want to replace all instances of S
-
Do IOS restriction settings prevent restoring from a different backup
Can a child restore their iPad from their own backup and override restrictions set in place?