Oracle sync for Macintosh doesn't work with Leopard.

I have tried to install the oracle sync client for Mac OS (v 9.x) and it will just not install on any Leopard OS Macs. The console message repeats the error:
5/27/08 11:07:12 AM [0x0-0x12012].Oracle Calendar Sync installer.1[121] 2008-05-27 11:07:12.373 install[126:190b] CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
and
5/27/08 11:07:15 AM com.apple.launchd[81] ([0x0-0x12012].Oracle Calendar Sync installer.1[121]) Stray process with PGID equal to this dead job: PID 127 PPID 126 osascript
The installer does work with Tiger. I have found that it complains about some Java errors when its unpacking itself but I have the most recent version of Java available for this OS.
Any thoughts?

I was able to get the sync to work when I started on a machine running Tiger (OS 10.4) and then upgraded to Leopard, but NOT on any machines that start at Leopard.
I've just about abandoned Oracle Calendar given their (lack of) product support, and likewise for PalmOS devices.
Bring on iPhone.

Similar Messages

  • IDVD doesn't work with Leopard

    Hi, I recently installed Leopard and have had no problems with it until I tried to use iDVD today and found that the themes will not load. Does an upgrade to iLife 08 solve this problem?
    I previously had no problems using iDVD. Below are the specs from my computer.
    Hardware Overview:
    Model Name: iBook G4
    Model Identifier: PowerBook6,7
    Processor Name: PowerPC G4 (1.5)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 1 GB
    Bus Speed: 142 MHz
    Boot ROM Version: 4.9.3f0
    Serial Number: 4H543GPTSE9
    Sudden Motion Sensor:
    State: Enabled
    Version: 1.0

    Hi
    Yes iDVD 5 doesn't work with Leopard.
    Installing iLife08 will install iDVD 08 which works BUT NOW iMovie'08 will not work
    though it needs a G5 1.9GHz minimum. So You need to download iMovie HD 6 (6.0.4)
    which You are entitled to as an iLife08 owner.
    Yours Bengt W

  • Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

    Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

    I am sorry you are having this trouble. 
    Here is an article on troubleshooting calendar syncing with iCloud.  See if the suggestions there are of help.
    http://support.apple.com/kb/TS3999

  • Publish for Approval - the new plug-in - doesn't work with Leopard

    This aperture plug-in arrived for download just a few days before Leopard arrived. It worked great with Tiger. It doesn't work at all with Leopard. It appears that Leopard comes with a new version of Apache Server and it doesn't work with the Publish for Approval plugin. Does anyone know if and when an update will be released?

    I'm not seeing the Java plugin in the plugins list in the System Details list.
    Did you install the 32 bit Java version?
    Do you see the Java plugin in "Firefox/Tools > Add-ons > Plugins"?
    *https://support.mozilla.org/kb/Troubleshooting+plugins
    *http://kb.mozillazine.org/Java

  • Male to male audio cable for car doesn't work with my iphone 4s?

    I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music.  It works fine with my iphone 3G, but it doesn't work with the new 4s.  Is there a special cable I need to use with it?  It's weird, because my earbuds work with either iphone, but not the audio cable.  Suggestions??

    I have the exact same issue with my new 4S.
    I haven't find a solution yet.

  • My WORD for Mac doesn't work with latest upgrade. Any Remedy?

    Most recent update to OS caused WORD for MAC not to work.  Any Remedy?

    If you just updated to Mountain Lion (10.8) and you were using Office 2004, your best option is to find a newer Office replacement. Here are a few:
    Office 2008 or newer ($140 and up for the 2011 version; you may find 2008 used elsewhere)
    Apple Pages ($15)
    LibreOffice (free)
    Matt

  • Oracle Help search feature doesn't work with RoboHelp generated output

    I am using RoboHelp HTML, Version 10 on Windows 7.  I am able to generate Oracle Help output and integrate it with my Java application.  When I do this, the Content and Index tabs work fine, but the Search feature does not. Regardless of what search term I try, I get no search results.  In generating the Oracle Help output, I used the default options throughout.
    Any suggestions as to what is causing this problem?
    Thanks.

    Dear Peter,
    I met the following problem, and please help me.
    My English (not Chinese) operating system: Windows XP
    Version: 2002
    Before using RoboHelp 7 to generate Webhelp, I perform the
    following steps:
    1. Control Panel->Regional Options
    2. On the "Languages" page make sure make sure you check the
    box "Install files for East Asian languages".
    3. On the "Advanced" page select "Chinese" from the language
    dropdown list.
    Then I perform the following steps:
    1. Use RoboHelp 7 to generate Webhelp (my Webhelp project
    contains localized Chinese files).
    2. In the "Search" tab, input a Chinese character(For example
    "连接") and perform a seach.
    Result: Serching...(or 正在搜索) or
    No topics found (or
    未找到主题)。
    Expected result: I can get the result.
    Text

  • Sony Bridge for Mac doesn't work with my Sony Xperia J

    I have installed Sony Bridge for Mac version 3.7.1, but it won't connect to my Sony Xperia J which I have only had for 3 months.
    I get the error "Could not connect to your Xperia device. Please disconnect and reconnect it again. Restart the device if the problem persists". All the time.
    I have tried all of the suggestions in the error message. I have also tried reinstalling Sony Bridge for Mac, to no avail.
    I am running Mac OS X 10.9.2 on an iMac. I am also using the correct USB lead - the one supplied with the phone.
    The Mac system log shows this error:
    Apr  3 20:42:35 robins-imac.default Sony Ericsson Bridge for Mac[973]: BUG in libdispatch client: kevent[EVFILT_WRITE] delete: "No such file or directory" - 0x2
    I suspect that whoever wrote Sony Bridge for Mac did not try it on OS X 10.9.2.
    I am seriously thinking of getting rid of this phone and getting one that works properly with the Mac - ie, not a Sony phone. Sony always seem to have problems with supporting Macs, for some bizarre reason.

    Hi Yorkshirecomposer,
    I will ask the development crew about the system log error. Additionally, could you provide me with error logs to send them as well?
    Here’s how to get error logs from Sony Bridge for Mac: 
    1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
    2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
    3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
    4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
    5. PM that file to me or post the contents here
    Best Regards,
    David

  • 2.2 GPIB driver for Solaris doesn't work with Sol. 2.3 tester

    Upgraded to 2.2 GPIB driver to fix issue of driver being lost on Sun Ultra60's at shutdown and reboot. The driver works fine with 10 of the 11 tester platforms we use. This tester is a Genesis III running Solaris 2.3. The program will run successfully, but when shutdown and re-started, the drivers are not there and must be re-installed. What to do? Thanks.

    Thanks for the suggestion to check privileges, but that's the problem--the driver is not present to have any privileges to check. On reboot, there are only links (all owned by root with 777 perm.) at /dev which lead to non-existent directories.
    #/dev> ls -l gpib*
    lrwxrwxrwx 1 root other 43 Apr 18 09:50 gpib -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib
    lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib0 -> ../devices/pci@1f,4000/NATI,pci-gpib@2:gpib0
    lrwxrwxrwx 1 root other 44 Apr 18 09:50 gpib1 -> ../devices/pci@1f,4000/NATI,pci-gpib@4:gpib1
    If you try to use these links to go to these dirs, there're not there. Also, ibconf shows no gpib devices loaded.
    Any more suggestions would be greatly appreciated.

  • Mail for Exchange - doesn't work with Ex. server 2...

    I wanted to connect my N900 to Exchange server 2003 (ES2003). There is a problem in answer from ES2003. It doesn't answer.
    Is there any setting I cannot to find or any apps which can solve this problem?

    Bleky wrote:
    I wanted to connect my N900 to Exchange server 2003 (ES2003). There is a problem in answer from ES2003. It doesn't answer.
    Is there any setting I cannot to find or any apps which can solve this problem?
    Check the Maemo Wiki: Mail for Exchange
    http://wiki.maemo.org/Mail_For_Exchange_%28MfE%29_Heartbeat_and_FAQ
    and discussion at:
    http://talk.maemo.org/showthread.php?t=35136

  • Transparency for JTabbedPane doesn't work with java version 1.5  .......

    Hi all,
    I have a tabbed pane to which i add a panel. Both tabbed pane and panel are set opaque(setOpaque(false)) and i set background image for main container. It works fine in java version 1.4.2_04 showing all the panels and tabbedpane transparent. But when it run in version jdk1.5 the transparency effect goes off.
    what is the problem? how to fix it up? please help....
    here below is the code. Take any jpg image as background.jpg.
    import java.awt.*;
    import javax.swing.*;
    import java.awt.color.*;
    public class Test extends JDialog {
         float[] white = {.99f, .99f, .99f};
         public Test() {
              UIManager.put("TabbedPane.selected",
                   new Color(ColorSpace.getInstance(ColorSpace.CS_sRGB), white, .0f));
              JTabbedPane tabbedPane = new JTabbedPane();
              Color COLOR_WHITE_TRANSPARENT_VAL = new Color(
                   ColorSpace.getInstance(ColorSpace.CS_sRGB), white, 0.0f);
              tabbedPane.setBackground(COLOR_WHITE_TRANSPARENT_VAL);
              tabbedPane.setOpaque(false);
              JPanel p1 = new JPanel();
              p1.setOpaque(false);
              tabbedPane.add(p1, "Tab 1");
              // panel for displaying background image
              JPanel backPanel = new JPanel(new BorderLayout()) {
                   ImageIcon img = new ImageIcon("background.jpg");
                   public void paintComponent(Graphics g) {
                        Dimension d = getSize();
                        g.drawImage(img.getImage(),
                             0, 0, d.width, d.height, null);
                        setOpaque( false );
                        super.paintComponent(g);
              backPanel.setLayout(new BorderLayout());
              backPanel.add(tabbedPane, BorderLayout.CENTER);
              backPanel.setOpaque(false);
              getContentPane().setLayout(new BorderLayout());
              getContentPane().add(backPanel);
              setSize(300, 300);
              setVisible(true);
         public static void main(String[] args) {
              Test test = new Test();
    thx,
    Soni

    Hi Reneto,
    We had the same problem in our project where-in we asked BASIS team to install the lower version of JAVA 1.42..
    No proper document from SAP for using lower version of JAVA.
    I hope this helps.
    Regards
    Shashidhar

  • Cmd-k doesn't work with Leopard to access Win XP

    With 10.5.4 on an iBook I was able to get to Win XP shared files just fine. With 10.5.6 on a new Macbook I've been unable to get this to work despite having fully researched the situation with Google and having tried all the suggestions that apparently didn't work for anyone else with the problem either.
    I'm using SMB account sharing (well, I'm trying anyway.) The account names and passwords are common between the Mac and the PC. Everything has the right permissions but all I can get with cmd-k (using either machine name or IP) is "Connection failed. You do not have permission to access this server."
    The XP machine is listed under SHARED in the finder side bar but if I click on it says "Connection Failed" in finder. If I select "Connect As" it doesn't even ask me who "As" ought to be but just puts up the "Connection failed..." dialog box.
    From this it seems that Leopard can see my XP machine but not get to anything on it that I've made shared.
    The strange thing and what makes me sure this is a Leopard bug is that I have removed the XP machine from the Keychain and I still don't get any dialog asking for account and password. It just barfs up the "Connection failed..." dialog.
    Can anyone tell me what to do for this? If there is a bug in 10.5.6 which makes sharing XP resources impossible how about just admitting it so I can put this machine in the closet until Leopard is fixed and quit throwing good time after bad trying to get it to work.
    Thanks,
    Bob

    Problem found and fixed. I've been trying to chase it down pretty much full time for the three weeks since "Security" Update 2009-1 completely hosed Windows file sharing (SMB.) I wonder if the time is billable to Apple.
    The SMB file system extension was given the wrong permissions by that "Security" update and won't load as a result. Incredible. Actually it sorta makes me wonder if they didn't intentionally close a security hole by disabling SMB file sharing cause they couldn't see how to really fix the problem. I digress.
    Log in as an administrator and enable root: In /Applications/Utilities run "Directory Utility". Open the lock on the bottom left. From the Edit list, select "Enable Root User". You will be asked to create a password for becoming root (superuser.) Do NOT forget this password. I use the same one as my main administrative account. Leave the utility open.
    From Utilities run "Terminal".
    Enter "su" and you will be asked for the above password that will give you root (superuser) superpowers.
    Enter "cd /System/Library/Extensions" to get to the directory containing the SMB file system extension.
    To fix permissions enter "chmod -R g-w smbfs.kext".
    To start the extension enter "kextload smbfs.kext".
    Close Terminal.
    For safety return to the open Directory Utility window (you may have to unlock it again) and from Edit select "Disable Root User". Exit the utility.
    You should now be able to connect to any Windows shares you previously established and the fix persists across shutdowns.
    Bob

  • Airport Express Doesn't Work With Leopard?

    I upgraded to Leopard, and am trying to install my new Airport Express. I get an error message saying that Airport Express doesn't support the current OS. Anyone else encountering that?

    You shouldn't need to install software unless you buy a base station released -after- the OS you're using was released. Leopard already contains a newer version of software for configuring the Express, AFAIK.

  • HP PSC 2355xi Scanning doesn't work with Leopard

    Please help! I have an iMac that I've upgraded to Leopard and an HP PSC 2355xi printer. It will print fine but I cannot use the All in One software from Hp and therfore, I cannot scan documents or use it's scanning functionality. I've downloaded the latest All in One software and reloaded it, to no avail. Very Frustrating! Please help with ideas or thoughts.

    I've had the same problem with an all-in-one I purchased in Dec. I can't figure it out either. The model I purchased is not listed on the HP web-site. Yes, the web-site is not exactly helpful. I tried the chat support and as soon as the person found out that I was a Mac user, that became the end of the help session. I spent the next hour on the phone with support. I finally hung up and went to other forums to figure it out.
    I have uninstalled and reinstalled about 3 times. I even went back to OSX 10.5. I'm assuming HP Scan Pro is the software to use. I get no communication between the all-in-one and my laptop when it comes to scanning. I'm not finding HP to be Mac friendly.

  • Many programs I used to use in Tiger doesn't work in Leopard

    Here are the ones I've noticed have not been working or have errors:
    iMovie
    iChat
    Yahoo Messenger
    Adium
    VisualHub
    There are probably like 10 more but I haven't seen it yet. Why are so many programs are acting like this. I was thinking it was becasuse it wasn't ugpraded enough but I did install the newer version and it doesn't work.

    Well, haven't we had to deal with a slew of updates every two years?
    And at least Vista x64 is probably more secure, supports EFI (UEFI 2.).
    The same people that would need a Mac Pro (dual cpu, 8GB RAM, etc) would be looking at 64-bit.
    Did not Apple tout the G5 from IBM as finally being a 64-bit system? But yes, even Adobe CS3 is still 32-bit and limited to 3.5GB of user space, which there are work arounds for.
    One person I tried to help was using Maya but his version doesn't work with Leopard, and blames Apple and 10.5 it seems, rather than realize he needs to consider an 8-core system rather than 4-core, more memory, make better use of disk and RAID, and of course... upgrade software or... WAIT FOR MAYA AND 10.5.x to catch up to each other!
    People assume you have to wait for SP1 for Windows, but think they should jump rigtht in, when we all have seen that X.3 is usually the first "sweet spot" in any release.

Maybe you are looking for