Oracle terminal file (Dutch version)

Can someone telme where i can download the dutch version of Oracle Terminal Resource File?
null

C:\>imp system/oracle show=y full=y
Import: Release 10.1.0.2.0 - Production on Wed Sep 20 12:37:48 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via direct path
...Message was edited by:
user52

Similar Messages

Error Opening Oracle Terminal File fmrweb.

I installed 9IAS portal and the forms/reports server. The portal works fine, but when I try the 'Run Form Web ( runform.htm)' I get an error "Error opening Oracle*Terminal file fmrweb." The file does exist in my c:\oracle\806\forms60 directory and my FORMS60_PATH is set to c:\oracle\806\forms60 as well. Anybody having ( had ) similar problems? Note: 8.1.7, portal, and formsserver installed on the same Win 2000 machine. No Oracle apps. Thanks in advance.

Hi Christian,
It's probably working because you're now using fmrweb.res instead of the foobar fmrwebdk.res. Just look out for that missing quotation mark :)
--Jesper

Forms9i: Cannot open Oracle*Terminal file: fmrweb.

Hi there,
Anyone who knows what to do about the error message "Cannot open Oracle*Terminal file: fmrweb" when trying to compile and run a form in Forms9i ?? I have found a few files named fmrweb*.* in the D:\OraHome\Forms90 directory. What can I do ???
Thanks for your help.
Cheers ...Jesper ( [email protected] )

hi jesper,
U must have been working with forms either design or run mode.
U have to close the application before oracle terminal can be effective.
restart forms desgin/run mode after u have registered the changes made in the oracle terminal file.
(resp. *.res)

Oracle .DMP file Which version

Hi,
Is there any way to find out which oracle version(oracle 10g or 9i) a .DMP file belongs to???
Regards,
Nagarjun.

C:\>imp system/oracle show=y full=y
Import: Release 10.1.0.2.0 - Production on Wed Sep 20 12:37:48 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via direct path
...Message was edited by:
user52

Oracle*Terminal configuration problem for Web deployment

Hello everyone!
I am a novice in using Oracle Forms 6i. I installed a Forms 6i Developer and Server at Windows 2000, the same machine where 8.1.6 Server is running (of cource I installed DB server and Developer in different Oracle_Home's).
Everything seems to be going well while trying "Client-Server" model. But I can not suceed in deploying forms to the Web. For example when I try "Run a form on the Web" standard option, after I try to run a standard test form (test.fmx), I get another Browser (IE5) window opened, then an applet loads and after that I get a Java-form inside of IE5 window with red bell picture and an error message: "Error while opening Oracle*Terminal file fmrweb."
Can anyone help me with an advise what to do in such situation?
Thank you in advance
Alexander Ilin

I can't answer the specific problem about the test, but the resource file is set up as follows:
The html file that invokes the Forms applet has a server argument showing where the terminal key-mapping file is stored on your forms server. In your case it appears to be looking for fmrweb.res and can't find it.
Take a look at the html and find the path it is using to look for it (I think you'll find this in the ServerArgs parameter). Then make sure the file is there on your Windows 2000 server.
If it isn't there, do a search for it in the server's Oracle_home directory, and then copy it to the directory where it is expecting it. Along with fmrweb.res, you can also use fmrpcweb.res - just replace fmrweb.res in your html file.
Hope that helps.

Where can I find the apple agenda (calendar) files on the dutch version of OSX 10.8.2?

I try to recover items in my calendar using time machine, but I don't know where I can find them in the dutch version of OS X Mountain Lion 10.8.2. Can someone help me

http://support.apple.com/downloads#java
good luck

Installing Oracle Terminal on a NT 4.0 station

We need to install oracle terminal, in order to map the page up and page down keys. The product isn't available on the install list. Has anyone else install oracle terminal in a windows environment or is there another way to map the up/down keys?

I did this but when I run the ot60.exe it says "ot: cannot find the application startup file.". Could you please tell me how to install this Oracle Terminal properly? Thanks.
Mandy
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Duncan Mills:
You may still need terminal if you are talking about Client Server key mappings.
In certain versions of the Developer CD Terminal was not available on the product list when you did a custom install.
To work around this simply copy the files manually from the CD:
OT60.EXE to your \bin directory
and
OTUSW.RES & OT.HLP to your TOOLS\COMMON60\ directory<HR></BLOCKQUOTE>
null

Problem changing default key bindings using Oracle Terminal

Hello,
I'm facing a problem changing default key bindings using Oracle Terminal. I changed
some bindings, saved them in forms60/fmrusw.res, started the generation and saved again.
I thought that's it but it wasn't. It took no effect at all in Forms (even after recompilation) although reopening the file in Terminal showed the changes. I'm using Forms in German, which means that even the key bindings displayed in Forms are translated i.e. STRG+F1 instead if CTRL+F1,
but I can't find a german version of this resource file, so i think it's the same resource file for all supported languages. But what is needed for the changes to take effect ?
Thanks in advance
STD
null

Hi,
is it client/server you are working?
if so you should not be using the fmrusw.res file because I guess your NLS_LANG is German_Germany.WE8ISO8859P1 or something like that. This means the terminal that is being opened is fmrdw.res instead of fmrusw.res and this file should be edited using Oracle Terminal.
if you are working via the web implementation than you can open the file fmrweb.res in a text editor and change the keybindings in there. If you need to have the PC like key bindings on the web just open the fmrpcweb.res and see if it contains the German texts. If so you can either copy this file over the frmweb.res file or you can specify term=fmrpcweb.res in the serverargs parameter.
Hope this helps.
Kind regards,
Frank van der Borden
Oracle Support Services
Netherlands

Import Oracle Database File Error

Hi Experts,
I got an oracle dump file somefile.dmp today. i dont have any details regarding the dump file but the size is nearly 1.5GB.
I just thought to import that file to my existing Database in local server, the local oracle server details are
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE     11.1.0.7.0     Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production                                          But when i tried to import the dump file, i received the following error
IMP-00037: Character set marker unknown
IMP-00000: Import terminated unsuccessfullyCan some one help me in this?

DB-user11904889 wrote:
Thanks for your reply.
I am not clear with this point
- Is the file FTP transferred? Then the possibility is that you used ASCII as transfer mode where BINARY is needed
What i need to do then?.. I need to ask a new dump file with BINARY transfer mode ?Yes.

Window location for .terminal file

Hi,
I have a custom .terminal file that opens a terminal window to a
specific number of columns and rows, and runs a command.
Although I can cause plain ol' Terminal to open at the top left of the
screen by moving it there, then closing it, my custom file insists on
opening towards the middle of the screen.
I want it at the top left.
I've already deleted the pref file, no joy.
Here are the properties for my custom file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd
">
<plist version="1.0">
<dict>
<key>CommandString</key>
<string>ssh -l charles curly</string>
<key>FontAntialias</key>
<false/>
<key>RunCommandAsShell</key>
<true/>
<key>VisualBell</key>
<true/>
<key>columnCount</key>
<integer>210</integer>
<key>name</key>
<string>Basic</string>
<key>rowCount</key>
<integer>55</integer>
<key>shellExitAction</key>
<integer>0</integer>
<key>type</key>
<string>Window Settings</string>
</dict>
</plist>
Thanks,
Charles
Things that make you say, Hmmmmmm...
If a robber tried to rob a dance club and yelled, "Everybody get
down", would all the people start dancing?

Please don't cross post to as many forums as you can find. See the response you got on DOUG.

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

Error in Oracle Application Server (export) Version 4.0.7.0 ON Windows NT

Hi all,
I am trying to install Oracle Application Server (Export) Version 4.0.7.0.0 for Windows NT on Windows NT 4.0 SP1.At the time of installation every thing goes smooth but when i try to connect to the specified database which is in the same network(LAN) of the machine it says tns could not resolve the service name and after that i did the tns entry in the tnsnames .ora file but it is givin the same issue i then tried to ping the server its giving reply i even see the installed poduct it is showing that net8.0 is installed what would be the problem i am not able to identify .
Following is the commach which i am firing to test the connection
1) start > run >cmd
2) command prompt opens then in that i type the command
exp80 scott@testit asks for passowrd i enter the password
then after some time the tns error comes
The home for this d:\orant1
Now after that i installed oracle 8i client release 8.1.5 on the same machine to check weather this problem is machine dependent,after the full installation and doing the tns entry i tryiid to connect thruoug sql plus (which got istalled which this installer) its working fine.
The home for this d:\orant
My main aim is to user the Expot Utility to take the export test database objects.
Thnks in Advance

Hi,
you have a database version 10.2.0.1.0, but SOA needs 10.2.0.2 or higher. Update your database using the latest patchset.
Regards,
Tomas

Oracle Internet File System Release 9.0.2 Doesn't fully download

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name - download-uk.oracle.com
- Filename - hpunix_ifs9.0.2.0.0.cpio.gz
- Date/Time - 17th Sep 2002 2pm, 5pm, 18th Sept 9am.
- Browser + Version -- Internet Explorer 6
- O/S + Version -- Windows 2000
- Error Msg
The download of the Oracle Internet File System software never fully completes. It is a 157MB file and although I states that the download has completed successfully, I have only retrieved parts of the file (86MB, 17MB and 87k this morning). Is there a problem with the server I am downloading from ? Any help would be great as I require this software.
Cheers
Darren.

I have Jdeveloper 9.0.2 installed with Oracle 9i Developer Suite (9.0.2) on a Pentium III 600Mhz PC. The operating system is Win 2000.
To solve this startup problem of Jdeveloper, I uninstalled Oracle 9i Developer Suite (9.0.2) and reinstalled it completely. After reinstallation, Jdeveloper starts up again. The next day, and nothing else has been installed on the PC. I have the same problem back.
If I start Jdeveloper I have for a short time the hourglass (5 sec) Then nothing happens. The CPU usage goes from low (1%) to (100%), consumed by system and stays high forever.
What can be the problem? Has any one had this problem? Haven't seen this one. Did you switch the JDK to 1.4? There are issues with 9.0.2 under JDK 1.4.
Rob

Oracle Terminal, how can i simulate this setting into all client places

Hi friends,
i did setting at ORacle Terminal for ESC button to exit_form. it is ok working fine. i have his application installed into several client places, so, in all this places do i ahve to install Oracle terminal and change the key mappings or is any common registry setting i can add into the registry key, by copying FMRUSW.res file into my application folder,
i do have all my icons in my aplication folder and i add a registry key UI_ICON = 'myfloder', is there any possibility like this.
Thanks in advance

That is one of the big problems with client/server forms. You have to install your FMRUSW.res on every machine running your application, or at least on a file server where the runforms software gets the fmx files.
Changing the resource file is not something you want to do on a regular basis.

Oracle Hyperion system 9 Version 9.3.1 Licensing

How does Oracle Hyperion system 9 Version 9.3.1 Licensing work? What controls or limits the number of users now hat there is no licence file needed?

You do. Oracle does not enforce the purchased license on any of their products programmatically -- they may request to come to your organization and perform an audit -- I believe the licensing agreement allows for this.
Basically as a business/it administrator/security function you should know the number of users you are licensed for and never exceed that and/or sync up with Oracle on a quarterly basis.
Regards,
-John

Oracle terminal file (Dutch version)

Similar Messages

Maybe you are looking for