Oracle(tm) Client and Networking Components were not found..

I installed Oracle 9i Client tools on my machine (Win2000 Server), and successfully installed the Oracle ODBC Driver, however, upon using "Oracle in OraHome92" option in my Administrative Tools System DSN I receive the following error upon attempt to connect to the database with my ASP scripts:
"The Oracle(tm) client and networking components were not found. These components are supplied by Oracle Corporation and part of Oracle Version 7.3.."
I also receive the following error on my page:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have tried every trick I know and at this point am out of options. If anyone has a suggestion I'd really appreciate it.
Thanx
Phil

Hi,
I have been trying to setup Microsoft ODBC drivers on my Win7 64 bit laptop to work with my code.
Every time it gives me an error msg "Oracle(tm) client and networking components were not found"
ple help me in this. i have tried downloading and installing odbc driver from oracle site but none work.
Can someone guide me as which other software need to be install.
here is the connection string I am using, please help:
strDBConnString = "Driver={Microsoft ODBC for Oracle};" & _
"CONNECTSTRING=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST="&THostName&")(PORT="&TPort&"))" & _
"(CONNECT_DATA=(SID="&TSID&")));Uid="&TUserID&";Pwd="&TPassword&";"
Thanks

Similar Messages

  • Oracle client and networking components were not found.

    Hello, I've installed the oracle 9i Enterprise Edition, IIS, .NET framework 2.0 on a server, but when I want to open an aspx file i have this error:
    Server Error in '/kinepolis' Application.
    Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    Provider is unable to function until these components are installed.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Data.OleDb.OleDbException: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    Provider is unable to function until these components are installed.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [OleDbException (0x80004005): Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    Provider is unable to function until these components are installed.]
    System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1054593
    System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
    System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
    System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
    System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
    System.Data.OleDb.OleDbConnection.Open() +37
    System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
    System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
    System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
    System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
    System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
    System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
    System.Web.UI.WebControls.GridView.DataBind() +4
    System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
    System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
    System.Web.UI.Control.EnsureChildControls() +87
    System.Web.UI.Control.PreRenderRecursiveInternal() +41
    System.Web.UI.Control.PreRenderRecursiveInternal() +161
    System.Web.UI.Control.PreRenderRecursiveInternal() +161
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
    Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
    Do i really also need to install the client 6i on that server?
    Can somebody help me?
    thanks

    Hi Guys,
    I am wondering about this error as while I am using the same code to connect to the Oracle database server in my Windows program with Win Forms, the connection to the Oracle server is established and working fine.
    But when I have tried to use it with Web Forms for my ASP.NET Application, it throws me out with these exceptions :
    ?ex.Message
    "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    Provider is unable to function until these components are installed."
    ?ex.StackTrace
    " at System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr)
    at System.Data.OleDb.OleDbConnection.InitializeProvider()
    at System.Data.OleDb.OleDbConnection.Open()
    at PMlitDocs_NET.checkMe.Button1_Click(Object sender, EventArgs e) in C:\Inetpub\wwwroot\PMlitDocs_NET\checkMe.aspx.vb:line 32"
    Can anyone help?
    Trush.

  • Oledb and path length - Oracle client and networking components ...

    Hello,
    I've been suddenly getting the
    "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation."
    error when trying to connect to an oracle 9.2 database using the msdaora oledb provider.
    "..ora92/bin" is in my PATH environoment variable and the hints about setting read and execute permissions on the ..ora92/bin direction didn't work for me. However, what did do the trick, was reducing the length the PATH environement variable to under 182 characters.
    Anybody else seen this that can explain what's gonig on here?
    Erik

    Hello Kamal,
    Thanks for your reply
    My system looks like this:
    OS: MS Windows XP Professional Service Pack 2
    msdaora version: 2.81.1117.0
    This problem has only recently surfaced, but has now appeared on at least two other systems as well as my own. Any system changes must have happened on all three systems. I have "automatic updates" setup on my computer and they maybe setup on the other computers - could the be responsible for breaking oledb?
    Other things I have tried:
    The Oracle Oledb provider is also not working. It gives me the error:
    "OraOLEDBpus.dll: the specified module could not be found"
    When I reduce the size of the PATH variable it works too.
    I am always able to run executables from the ../ora92/bin directory. So the path is only being wrongly interpreted by the Oledb providers.
    Erik

  • Common requirement_SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctly

    Greetings,
    After the installation of the extension pack (local sql server and installed local) i get this warning:
    Common requirement SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctly
    and
    Common requirement SSMA Synchronization components were not found on SQL Server, please check if Extension Pack is installed correctly.
    In the Program and Features Control panel the Feature "SSMA Extensionpack" (or similar) is installed and i see it in the startmenu.
    what's wrong here, any hints?

    Hi A. Bloise,
    Based on your description ,we need to verify that the type and version of SSMA Extension Pack. Assume that you install SSMA for Oracle Extension Pack, I recommend you check the following things.
    1. Make sure that the setup file of SSMA for Oracle Extension Pack is not corrupted. You can download it from
    Microsoft Download Center.
    2. Make sure that your computer meets the following requirements for the SSMA for Oracle Extension Pack.
        •SQL Server 2005 or higher.
        •Microsoft Windows Installer 3.1 or a later version.
        •Oracle Client 9.0 or a later version, and connectivity to the Oracle databases that you want to migrate.
        •The SQL Server Browser service must be running during installation.
    3. Make sure that  the account used to install the extension pack, is a member of the sysadmin server role on the instance of SQL Server.
    If this does not work, please contact with SSMA support team for further help:
    [email protected]
    Thanks,
    Lydia Zhang

  • Oracle instant Client and unixODBC for Linux not work

    Hi experts,
    I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
    I have done steps as following:
    Login to Redhat2 as root and type commands:
    1)Install Instant Client + sqlplus
    # rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
    # rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
    2)Setting environment variable
    # LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
    # SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
    3)Testing connection to Redhat1(Oracle DB server) using sqlplus
    # sqlplus abc/[email protected]:1521/lab2
    Connected.
    5)Begin to install unixODBC
    # rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
    # rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
    # rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
    6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
    # ls /etc | grep odbc
    odbc.ini
    odbcinst.ini
    7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
    # tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
    # ls /usr/local/bin/
    dltest isql iusql odbc_config odbcinst
    # ls /usr/local/include
    autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
    # ls /usr/local/lib
    libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
    libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
    libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
    libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
    # NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
    # TNS_ADMIN=/root; export TNS_ADMIN
    # ODBCINI=/etc/odbc.ini; export ODBCINI
    7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
    # sqlplus vonphoto/vonphoto@lab2
    SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    8) Edit odbc.ini and odbcinst.ini
    ---odbcinst.ini
    # Included in the unixODBC package
    [Oracle 10g ODBC driver]
    Description = Oracle ODBC driver for Oracle 10g
    Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
    Setup =
    FileUsage =
    CPTimeout =
    CPReuse =
    ---odbc.ini
    [ora_dns]
    Driver = Oracle 10g ODBC driver
    DSN = ora_dns
    ServerName = xxx.xxx.xxx.121
    UserID = vonphoto
    Application Attributes = T
    Attributes = W
    BatchAutocommitMode = IfAllSuccessful
    BindAsFLOAT = F
    CloseCursor = F
    DisableDPM = F
    DisableMTS = T
    EXECSchemaOpt =
    EXECSyntax = T
    Failover = T
    FailoverDelay = 10
    FailoverRetryCount = 10
    FetchBufferSize = 64000
    ForceWCHAR = F
    Lobs = T
    Longs = T
    MetadataIdDefault = F
    QueryTimeout = T
    ResultSets = T
    SQLGetData extensions = F
    Translation DLL =
    Translation Option = 0
    DisableRULEHint = T
    TraceFile = /backup/sql.log
    Trace = Yes
    9)Testing the driver and the data source
    # odbcinst -q -d
    [Oracle 10g ODBC driver]
    # odbcinst -q -s
    [ora_dns]
    10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
    # isql -v ora_dns
    isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
    I have spent 4 days to search on the internet. But it still error.
    Pls help me.

    I don't understand your step 7 (the first step 7, actually).
    What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
    unixODBC should be installed after step 5.
    I guess that that is the cause of your problem.
    isql is not linked against readline at all on my RHEL 5 system.
    Do you notice any improvement after removing the files from that tar.bz file?
    Yours,
    Laurenz Albe

  • Oracle.DataAccess.Client.OracleException: The provider is not compatible

    I am getting an error, and I don't understand why I'm getting it.
    Error:
    Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
    Environment:
    ODP.NET, 10.2.0.2 (ODTwithODAC10202.exe install)
    Oracle 9i database
    Windows 2000, .NET 1.x framework
    Before ODP.NET, Oracle 9.2 client
    Server does not have Visual Studio installed
    Just installed ODP.NET today; any time I attempt to access OracleConnection, I get the error above. I am a newbie to server installations; if something is obvious to you, it might not be obvious to me, so feel free to point out even the most basic things.
    I did install ODP.NET (same version) on my own PC several months ago, running over the same database, and everything seems to be working fine...
    Message was edited by:
    user531571

    Yeah; apparently, the Oracle install on that server was known (by everyone but me, from the sounds of it) to be exceptionally fragile. Installing ODP.NET brought down all Oracle connections. Uninstalling ODP.NET broke (actually, shattered might be closer to the truth) the Oracle instance on that box. Our solution? Start from scratch with a new server. Another piece of information which would have been nice to know is that they were looking for an excuse to get rid of this server; I wouldn't have been running around like a madman trying to fix it (and stressing all the while).
    So, the problem has been solved, but not in any kind of normal fashion.

  • Error to connect oracle 10g client and designer BO 4.0

    hello,
    I try to connect oracle 10g client and designer BO 4.0.
    I created an ODBC connection to function in the administration tools of data sources but I can not connect once in designer.
    I tried using the driver directly oracle designer 10 but I have the same error that is this:
    DBD: ORA-12154: TNS: connection identifier specified could not be resolved
    someone there had the same concerns?
    cordially

    Hi,
    so it looks like that your TNSNAMES.ORA file isn`t properly configured. Thats why you can connect with the IDT to your Oracle Database.
    Your DBA`s should sent you the correct TNSNAMES.ORA file or the entry for your DB prior. After the tnsping works, you will be able to use the IDT properly.
    Regards
    -Seb.

  • Oracle service, Listener and http server does not start automatically

    Hello,
    I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
    Thanks, Khawar.

    Hi Rajesh,
    Thanks for reply, I will check this link and will be back if facing problem.
    Regards, Khawar.

  • Oracle xml DB and text features are not installed

    HI,
    I installed Sql developer 3.0 ,oracle 11g and jdk 7 on centos 5.when iam running sql developer its showing error message oracle xml DB and text features are not installed.
    pls anyone help me out.
    thanks
    srinivas
    Edited by: srinivas on Oct 17, 2011 4:49 AM

    may be help you
    Re: Connection Error - Oracle XMLDB and Text Features are not installed.

  • Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

    Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing.  They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

    debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
    How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
    In the best case, you mean they were not deleted from your camera.  If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
    If you have a way to be certain that your two folders were not deleted from your Mac,  follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.)  On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted.  If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
    It is also possible that the missing folders might be saved somewhere you do not expect them to be.
    It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
    Here are some more ideas you can consider:
    Restart Mac and then look where you expect the folders to be.  They may be visible there now.
    If not, try a Spotlight search for the folder name(s) you used.  Spotlight may give you a list of places to look.  If you don't remember the folder name(s), try a search for the file type your camera uses for saved images.  My cameras save "jpg" files, but yours may save other image file types. 
    You can also open a finder window and use the window's search oval to search.  The method allows you to use the search "+" button to add invisible items via the "File Visibility"  choice.
    debbie5891 wrote:... I have looked through every folder and they are not there....
    If you are using any version of Mac OS X, I doubt this statement can be true.
    If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large.  For example,I keep my startup disk small and write most of my files to other disks.  Even so, my startup disk contains more than 195,000 folders.
    If you mean you used some software to search each folder, please post back the name of the app you are using.
    debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
    I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
    I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7).  You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
    debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
    I am not aware of any Apple apps that work specifically on photo files.  If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images.  However, it will be MUCH simpler to merely download another copy from your camera.
    You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied.  To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
    debbie5891 wrote:...Thank you.
    You're most welcome.
    If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • HT4946 how can i backup music and apps which were not stored on my computer in order to upgrade my iphone?

    how can i backup music and apps which were not stored on my computer in order to upgrade my iphone?

    dinaK wrote:
    how can i backup music and apps which were not stored on my computer in order to upgrade my iphone?
    Be sure to follow All  the Steps here... 
    Updating to iOS 5
    http://support.apple.com/kb/HT4972

  • The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

    Hi,
    I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
    When i try to enroll a permanent smart card for a user, its shows me the following error:-
    The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
    Also there is no logging done for the particular event.
    I am able to change my smart card pin and view my smart card info. through the FIM CM client. 
    Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
    Thanks

    Hi,
    Sorry for the delay in reply.
    Please try the following steps first:
    Open Powershell as Administrator
    Go to Start--> Run and type wbemtest.exe.
    •Click Connect. 
    •In the namespace text box type "root" (without quotes).
    •Click Connect.
    •Click Enum Instances…
    •In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
    •In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
    •In the Object Editor window, double-click HandlesPerHost.
    •In the Value dialog, type in 8192
    •Click Save Property.
    •Click Save Object.
    Under properties find the property "MemoryPerHost" or any other ones you need to modify  and double click it
    Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
    Click Save Property
    Click Save Object.
    •Close Wbemtest.
    •Restart the computer.
    And if all nodes are Windows server 2012, install the following update rollup as well:
    Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
    http://support.microsoft.com/KB/2862768
    If you have any feedback on our support, please send to [email protected]

  • Error code: 0x80070035 The network path was not found

    "Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
    The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
    Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".  
    Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
    So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
    DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
    All strarted and running in Automactic mode.
    Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
    Someone please help !

    Hi,
    In addition, I would like to suggest the following:
    Enable NetBIOS over TCP/IP:
    1.    Go to “Control Panel\Network and Internet\Network Connections”.
    2.    Right-Click on the connection and choose Properties.
    3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.    Click Properties, and then click Advanced.
    5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Thanks.
    Nicholas Li - MSFT

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • Updating hybrid configuration failed - Kerberos authentication: The network path was not found

    I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
    When I run the Manage Hybrid Configuration, I receive the following error:
    Updating hybrid configuration failed with error
    'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
    path was not found.
    The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
    [1/5/2014 21:21:1] INFO:Opening runspace to
    http://[servername]/powershell?serializationLevel=Full
    [1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
    [1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
    error occured while using Kerberos authentication: The network path was not found. 
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
       at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
       at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
       at System.Management.Automation.Runspaces.RunspacePool.Open()
       at System.Management.Automation.RemoteRunspace.Open()
       at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
       at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
    I have sought help, posting on the forum at community.office365.com -
    http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
    Has anyone else come across this problem running the Hybrid Configuration Wizard?

    Hello Darrell,
    Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
    http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
    looks good.
    As the article states you can run the Exchange BPA and it will check if any of these exist as well.

Maybe you are looking for