Oracle training from Oracle

Hi,
This is Vidya from Oracle. I take care of Oracle training for corporates across all technologies and Applications.
We at Oracle always strive hard to cater to our customer's training requirement in any area. Thus, we keep building our curriculum on the latest, niche areas, ie., Fusion Middleware, ERP packages on R12, Database programs on 11g etc. Not only we conduct training on niche areas, but also on the areas like 9i, 10g 11i and others.
Through this forum, we would like to reach out as many customers as possiible and cater to their training requirements.
Below are my contact details and we would be more than glad to assist in any kind of query of yours.
Awaiting for your responses and we look forward to have a strong and mutually beneficial business relationship with our customers.
Thanks and regards,
Vidya Jayatheertha,
Oracle,
E-Mail: [email protected]
Mob: 9900744622.
Direct: 080-41084651.

mango_boy wrote:
i am interested in 11g DBA OCA/ OCP.
please give the link /phone no/ contact no/address for kolkata.Alternately, YOU could take the initiative and email the address provided.

Similar Messages

Oracle HRMS R12 training from Oracle University

Oracle HRMS R12 training from Oracle University
iWare Logic provides “Oracle Apps Training” and Certification in Oracle HRMS R12 in association with Oracle University.
Oracle HRMS Training and Certification topics
R12 E-Business Suite Essentials for Implementers
R12 Oracle HRMS Work Structures Fundamentals
R12 Oracle HRMS People Management Fundamentals
R12 Oracle HRMS iRecruitment Fundamentals
R12 Oracle Payroll Fundamentals: Configuration (Global)
R12 Oracle Payroll Fundamentals: Administration (Global)
R12 Oracle Time and Labor Fundamentals
R12 Oracle HRMS Self Service Fundamentals
For details please check
http://www.iwarelogic.com/training.htm
for Special Offer on our Oracle Apps trainings please check
http://www.iwarelogic.com/oracle_applications.htm
Following are iWare Logic’s contact details,
iWare Logic Technologies Pvt. Ltd.
Aditi Samruddhi, Banner,
Pune, 411045
Maharashtra, INDIA
Phone: 91 20 66321113
Mobile: 91 9326515010
Email: info at iWareLogic.com
Website: http://www.iWareLogic.com
http://www.oracle.com/global/in/education/maps/iware_logic_technologies.html
Oracle Apps Training http://www.iwarelogic.com/training.htm

Dear Mohsin,
Before you acces the Diagrammer, a TCF SocketServer must be running, Please do contact your system Administrator to confirm the same..
Regards
Guru K

Have any one attended Peoplesoft Integration Broker training from Oracle?

Hi,
Have any one attended Peoplesoft Integration Broker training from Oracle?
If yes please contact me on my mail id [email protected] i have some queries.
Thanks in Advance,
Amit

Yes, I could ping both machines from each other.
Here is the host file contents from Windows 7:
127.0.0.1 localhost
::1 localhost
127.0.0.1 activate.adobe.com
192.168.1.106 RAJ-PC
Here is from Window 2003 server:
127.0.0.1 localhost
192.168.1.100 saroja
Both nodes are listed under PeopleTools>Security Objects> Single Signon
Both nodes are secured with userid/pwd on Node page.
One of my machine had fire wall on, so I swtiched the fire wall off. Now machine A can ping both nodes but machine B can ping only local node. Pinging remote node displays "User name not defined in database".
Raj
Edited by: Raj on Jun 13, 2011 11:37 PM

Oracle 11g from oracle 8

Accssing oracle 8i from oralce 11g is not possible.But can I access oracle 11g from oracle 8?

It is not supported, and will most likely not be successful in connecting.
Client / Server / Interoperability Support Between Different Oracle Versions (Doc ID 207303.1)
HTH
Srini
Can I access Oracle 8i objects from Oracle 11g

Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4

Hi All,
Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
OS: Sun Solaris 5.9
Hardware: Sun E2900
Oracle Version: 9.2.0.6
Veritas Cluster Server: 4.1
We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
Thanks a lot in advance for help
Regards,
Manoj

Orcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.

Calling Stored procedure in Oracle 11g from Oracle forms developer 6i

We have Oracle 11g (11.1.0.7.0 ) database (64 bit) installed on Windows Server 2008.
In this database, we have stored procedure ABC(arg1) which is accesing a table in another instance through DB LINK. If we EXECUTE this procedure from SQL/TOAD. It runs successfully and generates the desired output.
If we write the contents of the stored procedure in the PROGRAM UNIT / ANY TRIGGER in FORM 6i then also, It runs successfully and generates the desired output.
It is also mentioned, that if we try to use any table in the same instance (and not through DBLINK) then it works fine.
However, if we try to call this stored procedure (which is accesing a table in another instance through DB LINK) from ORACLE FORMS 6i in WHEN-BUTTON-PRESSED trigger then the FORM BUILDER gets hanged while compiling the form developed in FORMS 6i.
Please provide a solution to this problem.
THANKS IN ADVANCE.
Hemant Singh.
Asstt. Manager(IT)
Software development team.

Forms 6i was never meant to run against a 11g database, this was not tested and is also not supported.Well, that is not completely true. Developer 6i is supported against a 11g database, but only for Oracle Apps R11. That means that for most other customers (not Apps) Forms 6i will work against an 11g database. However, only Apps R11 is supported, and patches are only created specifically for Apps. We are also running Forms 6i against an 11g database without (well, minor) problems.
In this case, you need to find a solution. You can try to put the stored procedure in a package. The package body, with the reference to the remote table, will be hidden from Forms this way.

Passing parameters to oracle rports from oracle forms

Dear all,
Can anyone tell me how to pass parameters from oracle forms 10g to oracle reports 10g ,i want to hide my connection string and parameteres while open the report through web
can anyone plese help me out to solve this problem.

Hi,
I had trail as advised, but anticipated results were not observed.
Here is the named configuration in formsweb.cfg
[NMPT]
form=D:\NMPT\FORMS\FHOPENFORM.fmx
userid=hmsprod/hmsprod@hindalco
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
imageBase=CodeBase
separateFrame=True
lookandfeel=oracle
logo=none
splashScreen=no
pageTitle =Test Application
background=no
colorScheme=blue
archive_jini=f90all_jinit.jar,icons.jar,frmwebutil.jar,jacob.jar
archive=f90all.jar
height=768
width=1024
envFile=nmpt.env
otherparams=useSDI=yesLOCATIONID=NMPT # new parameter which I want to access in my form
the URL is as follows:
http://MyPC:8888/forms90/f90servlet?config=NMPT
But I am unable to open the login page

Problem in connecting Non Oracle Database from Oracle

Hi:
I want to access "MS ACCESS" from Oracle 10g (10.2.0.1) using Windows XP.
I tried my best, applied all proper instructions I found from books and from Internet, but getting an error.
Here is what I did:
My Oracle database is called "ORCL" and "MS ACCESS" is called "access_1".
There is only one table "Employees" in "access_1".
1. Accessed ODBC from Start | Control Panel | Administrative Tools.
2. Clicked on Users DSN | "access_1" | Add.
3. Clicked on "Drive do Microsoft Access (*.MDB)" .
4. Hit Finish.
5. Entered at DATA SOURCE NAME "ODBC1" and at DESCRIPTION "Connect Oracle to MS Access". Also I clicked on SELECT and chose the "Access_1.mdb" which is located at "C:\Documents and Settings\Muhammad\My Documents" folder. Clicked OK. and clicked on OK again.
6. Now I went to Oracle side and configured listener as follows: (Only portion is shown here)
# listener.ora Network Configuration File: C:\oracle\product\orcl\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = RIYAZDESKTOP)(PORT = 1521))
7. Configuring the hs file located at C:\oracle\Product\Orcl\hs|admin as follows:
# HS init parameters
# HS_FDS_CONNECT_INFO = <odbc data_source_name>
# HS_FDS_TRACE_LEVEL = <trace_level>
HS_FDS_CONNECT_INFO = odbc1
HS_FDS_TRACE_LEVEL = OFF
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
8. The TNSNAMES.ORA File is located at C:\:\oracle\product\orcl\network\admin\ and has the following text (only the related text is shown here):
# tnsnames.ora Network Configuration File: C:\oracle\product\orcl\network\admin\tnsnames.ora
# Generated by Oracle configuration tools
access_db.world =
(DESCRIPTION =
(Address = (PROTOCOL = TCP) (HOST = RIYAZDESKTOP) (PORT = 1521))
(CONNECT_DATA = (SID = hsodbc))
(HS=OK)
9. The database link is created as follows:
SQL> create database link access_db USING 'access_db.world';
Database link created.
SQL>
10. Now the test and selection:
SQL> select * from employees@access_db;
select * from employees@access_db
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from ACCESS_DB
OH! I HAVE TO RELOAD THE LISTENER AND I DID IT HERE.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\orcl\BIN>lsnrctl reload
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-NOV-2006 17:51:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\oracle\product\orcl\BIN>
SQL> select table_name from all_tables@access_db;
select table_name from all_tables@access_db
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from ACCESS_DB
I HAVE DONE IT EXACTLY WHAT YOU PROVIDED ME BUT GOT THE SAME RESULT.
ANY SOLUTION!
THANKS.

see Connect 9i to Microsoft Access Database

Accessing non-oracle databases from oracle

Is there any way to access from oracle to non-oracle databases and copy the data using COPY command?

Hi Nitin!
You can access these legacy applications as so-called external applications. Check out the Application Server Single Sign On guide.
cu
Andreas

Using Oracle Discoverer from Oracle Forms

Can Oracle Discoverer4 be ran from Oracle Forms 10g?
If so, how and under what topic in documentation would this be under?
Thanks

I am in the need of this knowledge too. I wonder if there is any way that
I can pass parameters to the discoverer and the discoverer can
generate two plotters in one graph by evaluating the incoming
parameters. I could do it from Forms to Reports, but can I do it
from Forms to Discover? Appreciate any input!!!

Learn Oracle Financials From Oracle

Oracle University in India offers Certified Oracle courses across Oracle Technology and Applications. These courses are run by Oracle at its own education centers across the world. In India, the Oracle Education Centers are located in Bangalore, Chennai, Hyderabad, New Delhi, Kokata and Mumbai.
We provide training on Oracle Financials in all of the above mentioned locations. Kindly fill in the details asked below and mail it to me for further details.
1. Contact No :
2. Present Location :
3. Course Preffered :
4. Basic Qualification :
5. Work Experience :
6.Mail ID :
Thanks & Regards
Sutheesh T
ORACLE INDIA PVT. LTD.
Bangalore
Toll Free: 1600 448877 (In India only)
Direct:- 080-51084709
Mobile: 09880662638
Mail id: [email protected]

Hi ,
Thanks for showing interest in Oracle Education. Oracle University in India offers Certified Oracle courses across Oracle Technology and Applications. These courses are run by Oracle at its own education centers across the world. In India, the Oracle Education Centers are located in Bangalore, Chennai, Hyderabad, New Delhi, Kokata and Mumbai.
Kindly fill in the below given form and send it back to me.
1. Contact No( With std code)important:
2. Present Location :
3. Course Preffered :
4. Basic Qualification :
5. Work Experience :
6. Mail ID :
Example
1. Contact No : +91 9863 9121
2. Present Location : Bangalore
3. Course Preffered : OCP - Oracle Developer / OCP - Oracle Financials(ERP)
4. Basic Qualification : M.Sc. Computer Science - 2004 batch
5. Work Experience : 0 years, 0 months - Fresher
6.Mail ID : [email protected] [OR] [email protected]
Thanks & Regards,
Sumanth Udayashankar
Oracle India Pvt Ltd
Work: 91-80-51084704
Mobile: 91-9886131579
mail : [email protected]

ADF Mobile - insert data into oracle db from oracle adf mobile application

Hi,
I have to insert data from mobile into oracle database 11g(not in local sqlite database), can somebody tell me how to do it?
Thanks,
Anshul

Hi, Anshul, one common way is to expose DB data as ADF BC, and then add a service interface on top of ADF BC. This would allow the ADF Mobile app to access server DB through ADF BC. There may be other mechanisms to access server-side DB - I think APEX also expose some REST interface to Oracle DB as well. Another option is to use TopLink - TopLink can also expose some REST services.
Thanks,
Joe Huang

How to restart Oracle instance from oracle client

I have an Oracle server 10g with DEVEL instance on AIX machine. I have an Oracle Client on Windows machine as well. I want to stop and start the instance DEV from my client using bat file. Is it possible ? Is anybody knows how to do it ?
KP>

well, right now the correct question should be : how to start database.
I am able to login as sysdba to DEVEL on AIX ( from Windows client) and shutdown it but when I try to startup it returns such a message:
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
but I am still able to tnsping my DEVEL from client ...Post listener status, its contents and entry tnsnames.ora file. Here is how I got connected shutdown and started. The process I followed:
1)Made entry in listener.ora file as I said earlier, restarted the listener
2)Made change in tnsnames.ora file
3)Connect from client shutdown and started.
SQL*Plus: Release 9.0.1.0.1 - Production on Fri Sep 18 16:30:58 2009
(c) Copyright 2001 Oracle Corporation. All rights reserved.
SQL> conn sys/hawaii@ia1dev as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 364904448 bytes
Fixed Size 1287356 bytes
Variable Size 226495300 bytes
Database Buffers 130023424 bytes
Redo Buffers 7098368 bytes
Database mounted.
Database opened.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
Regards.
Edited by: virendra.k on Sep 18, 2009 4:36 PM

Not connecting to Oracle Database from Oracle BIEE 10g on Windows 7 machine

Hi friends,
I succesfully installed OBIEE 10g on my Windows 7 (Ultimate) machine using the assistance from one of your threads.
Now I am not able to connect to Oracle 11g database. When I tried to configure through START->Control Panel --> Administrative Tools --> DATA SOURCES (ODBC) ---> ....I am seeing Oracle 11g in System DSN but I am unable to see OBIEE driver in system DSN. After setting manually, I am now seeing OBIEE driver in user DSN. So is all other 32 bitapplications like MS Acess, Excel, etc., are all in user dsn.
When I open OBIEE Administration tool, I can only see ONLY Analytics Web and nothing else. How do I connect to Oracle database. Please assist me.
Thanks in advance.
Din

Hi,
Your window os 32bit or 64bit -- Please conform?
Your Os 64 bit -- http://www.mycabi.net/?p=19 please read this link.
Your windows os 32 bit :
Go--> Run--> odbcad32 follow the below step
In ODBC Administration, on the System DSN tab add a new connection
1. step : Data Source: "Oracle BI Server" -->"Next"-->Name: "AnalyticsWeb"-->Server: "local"-->(everything else unchecked)-->"Next"-->Give the username for the BI Server-->"Administrator" -->(I think the password can main blanc),Port: "9703 -->(everything else unchecked)-->"Next"-->(everything unchecked)-->"Finish"
When I tried to configure through START->Control Panel --> Administrative Tools --> DATA SOURCES (ODBC) ---> ....I am seeing Oracle 11g in System DSN but I am unable to see OBIEE driver in system DSN
A. I don't no why your creating ODBC connection.
Note: Open your rpd with AnalyticsWeb and give me useranme and password --> go to physical layer select connection pool and give all credntails here.
http://gerardnico.com/wiki/dat/obiee/ociv -- please refer this link
Datasource : Your dbname (ORCL,)
username: your schema name
Password: your schema password.
Hope it help's
Thanks,
Satya

How to run Oracle applications from Oracle Test Manager(OTM)

Hi All,
I have done a recording in Oracle Applications and I have sucessfully imported into OTM.
Whenever I run that script from OTM, it is showing some error called JIT Debugger error.
After that it is going to next screen, but after that , it is skipping the rest of the steps.
It is generating Reports as Skipped.
Please help me out.
Thanks in Advance,
Nishanth Soundararajan.

Hi Alex,
These are the lines which got populated when I run those commands,
C:\Documents and Settings\310700>C:\OracleATS\agentmanager\bin\AgentManagerServi
ce.exe -c C:\OracleATS\agentmanager\bin\AgentManagerService.conf
wrapper | --> Wrapper Started as Console
wrapperp | port 1787 already in use, using port 1788 instead.
wrapper | Launching a JVM...
jvm 1 | Wrapper (Version 3.0.3)
jvm 1 |
jvm 1 | log4j:ERROR setFile(null,false) call failed.
jvm 1 | java.io.FileNotFoundException: ..\..\logs\agentmanager.log (Access is
denied)
jvm 1 | at java.io.FileOutputStream.open(Native Method)
jvm 1 | at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
jvm 1 | at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
jvm 1 | at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
jvm 1 | at org.apache.log4j.FileAppender.activateOptions(FileAppender.ja
va:164)
jvm 1 | at org.apache.log4j.config.PropertySetter.activate(PropertySette
r.java:257)
jvm 1 | at org.apache.log4j.config.PropertySetter.setProperties(Property
Setter.java:133)
jvm 1 | at org.apache.log4j.config.PropertySetter.setProperties(Property
Setter.java:97)
jvm 1 | at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyC
onfigurator.java:689)
jvm 1 | at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyC
onfigurator.java:647)
jvm 1 | at org.apache.log4j.PropertyConfigurator.configureRootCategory(P
ropertyConfigurator.java:544)
jvm 1 | at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyCon
figurator.java:440)
jvm 1 | at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyCon
figurator.java:334)
jvm 1 | at org.apache.log4j.PropertyWatchdog.doOnChange(PropertyConfigur
ator.java:717)
jvm 1 | at org.apache.log4j.helpers.FileWatchdog.checkAndConfigure(FileW
atchdog.java:89)
jvm 1 | at org.apache.log4j.helpers.FileWatchdog.<init>(FileWatchdog.jav
a:58)
jvm 1 | at org.apache.log4j.PropertyWatchdog.<init>(PropertyConfigurator
.java:709)
jvm 1 | at org.apache.log4j.PropertyConfigurator.configureAndWatch(Prope
rtyConfigurator.java:400)
jvm 1 | at org.apache.log4j.PropertyConfigurator.configureAndWatch(Prope
rtyConfigurator.java:382)
jvm 1 | at oracle.oats.empstart.EmpStartMain.main(EmpStartMain.java:369)
jvm 1 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
jvm 1 | at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
jvm 1 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
jvm 1 | at java.lang.reflect.Method.invoke(Method.java:597)
jvm 1 | at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimple
App.java:105)
jvm 1 | at java.lang.Thread.run(Thread.java:619)
jvm 1 | log4j:ERROR setFile(null,true) call failed.
jvm 1 | java.io.FileNotFoundException: ..\..\logs\agentmanager_auth.log (Acce
ss is denied)
jvm 1 | at java.io.FileOutputStream.openAppend(Native Method)
jvm 1 | at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
jvm 1 | at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
jvm 1 | at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
jvm 1 | at org.apache.log4j.FileAppender.activateOptions(FileAppender.ja
va:164)
jvm 1 | at org.apache.log4j.config.PropertySetter.activate(PropertySette
r.java:257)
jvm 1 | at org.apache.log4j.config.PropertySetter.setProperties(Property
Setter.java:133)
jvm 1 | at org.apache.log4j.config.PropertySetter.setProperties(Property
Setter.java:97)
jvm 1 | at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyC
onfigurator.java:689)
jvm 1 | at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyC
onfigurator.java:647)
jvm 1 | at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(P
ropertyConfigurator.java:568)
jvm 1 | at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyCon
figurator.java:442)
jvm 1 | at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyCon
figurator.java:334)
jvm 1 | at org.apache.log4j.PropertyWatchdog.doOnChange(PropertyConfigur
ator.java:717)
jvm 1 | at org.apache.log4j.helpers.FileWatchdog.checkAndConfigure(FileW
atchdog.java:89)
jvm 1 | at org.apache.log4j.helpers.FileWatchdog.<init>(FileWatchdog.jav
a:58)
jvm 1 | at org.apache.log4j.PropertyWatchdog.<init>(PropertyConfigurator
.java:709)
jvm 1 | at org.apache.log4j.PropertyConfigurator.configureAndWatch(Prope
rtyConfigurator.java:400)
jvm 1 | at org.apache.log4j.PropertyConfigurator.configureAndWatch(Prope
rtyConfigurator.java:382)
jvm 1 | at oracle.oats.empstart.EmpStartMain.main(EmpStartMain.java:369)
jvm 1 | at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
jvm 1 | at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
jvm 1 | at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
jvm 1 | at java.lang.reflect.Method.invoke(Method.java:597)
jvm 1 | at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimple
App.java:105)
jvm 1 | at java.lang.Thread.run(Thread.java:619)
Please help me out.
Thanks in Advance,
Nishanth Soundararajan.

Oracle training from Oracle

Similar Messages

Maybe you are looking for