Oracle Tree VC++ Error

Dear All,
I am new to Oracle Forum.
I am beginner to oracle forms 10g .In my system forms 10g tree control throw VC++ assertion error.
I have 4 screens with tree control .But the error is occuring in only one screen.
Kindly help me to resolve the problem.
Edited by: 895587 on Nov 7, 2011 10:27 AM

As far as I understand, "oracle.install.db.DBA_GROUP" should be set to "dba". You actually do not need to use the "oinstall" group and can set it to "dba" too, unless you have a different support staff, one doing the Oracle installation, and another administration.

Similar Messages

Unable to display tree view; Error when parsing an XML document (Premature end of file.)

Hi folks,
I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
Unable to display tree view; Error when parsing an XML document (Premature end of file.)

kalyan,
There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
Mutti

Oracle.jms.AQjmsException: Error creating the db_connection( OSB PS2.)

hi All,
I am beginner in OSB 11g. Please excuse me if I am asking any dumb question.
I am trying to post messages to Oracle AQ by configuring JMS Destination in OSB Alert destination
I have configured AQ JMS in weblogic 10.3.3 ( OSB PS2) following the blog (http://jianmingli.com/wp/?p=2950)
When i invoked my proxy OSB proxy service i am getting following exception. Can you please help if i am missing any kind of setup while configuring the JMS Module.
Caused By: oracle.jms.AQjmsException: Error creating the db_connection
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:625)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:399)
     at oracle.jms.AQjmsXAConnection.<init>(AQjmsXAConnection.java:112)
     at oracle.jms.AQjmsXAQueueConnectionFactory.createAllXAConnection(AQjmsXAQueueConnectionFactory.java:320)
     at oracle.jms.AQjmsXAQueueConnectionFactory.createXAQueueConnection(AQjmsXAQueueConnectionFactory.java:198)
     at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnectionHelper.java:282)
     at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelper.java:144)
     at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSessionPool.java:517)
     at weblogic.deployment.jms.PooledConnectionFactory.createConnectionInternal(PooledConnectionFactory.java:355)
     at weblogic.deployment.jms.PooledConnectionFactory.createQueueConnection(PooledConnectionFactory.java:188)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.getSession(JmsOutboundMessageContext.java:399)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.newMessage(JmsOutboundMessageContext.java:621)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.setRequestMetaData(JmsOutboundMessageContext.java:229)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.access$100(JmsOutboundMessageContext.java:72)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext$SendAction.run(JmsOutboundMessageContext.java:788)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.security.Security.runAs(Security.java:61)
     at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.send(JmsOutboundMessageContext.java:551)
     at com.bea.wli.sb.transports.jms.JmsTransportProvider.sendMessageAsync(JmsTransportProvider.java:680)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
     at $Proxy111.sendMessageAsync(Unknown Source)
     at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageWithoutService(TransportManagerImpl.java:489)
     at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:417)
     at com.bea.wli.sb.init.FrameworkStarter$TransportServiceImpl.sendMessageAsync(FrameworkStarter.java:391)
     at com.bea.alsb.alert.action.jms.JmsActionProvider.executeAction(JmsActionProvider.java:345)
     at com.bea.alsb.alert.AlertDestinationHandlerImpl.sendAlertToDestination(AlertDestinationHandlerImpl.java:105)
     at com.bea.alsb.alert.pipeline.PipelineAlertManager.processAlert(PipelineAlertManager.java:59)
     at stages.logging.runtime.AlertRuntimeStep.processMessage(AlertRuntimeStep.java:125)
     at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
     at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
     at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
     at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:102)
     at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
     at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
     at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
     at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
     at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
     at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
     at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
     at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
     at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
     at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
     at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:329)
     at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
     at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
     at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
     at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
     at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
     at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
     at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1033_WLStub cannot be cast to oracle.jdbc.internal.OracleConnection
     at oracle.jms.AQjmsGeneralDBConnection.getProviderKey(AQjmsGeneralDBConnection.java:96)
     at oracle.jms.AQjmsGeneralDBConnection.<init>(AQjmsGeneralDBConnection.java:65)
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:566)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:399)
     at oracle.jms.AQjmsXAConnection.<init>(AQjmsXAConnection.java:112)
     at oracle.jms.AQjmsXAQueueConnectionFactory.createAllXAConnection(AQjmsXAQueueConnectionFactory.java:320)
     at oracle.jms.AQjmsXAQueueConnectionFactory.createXAQueueConnection(AQjmsXAQueueConnectionFactory.java:198)
     at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnectionHelper.java:282)
     at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelper.java:144)
     at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSessionPool.java:517)
     at weblogic.deployment.jms.PooledConnectionFactory.createConnectionInternal(PooledConnectionFactory.java:355)
     at weblogic.deployment.jms.PooledConnectionFactory.createQueueConnection(PooledConnectionFactory.java:188)

hi All,
Here is the actual exception while posting message into AQ ( AQ JMS) from OSB.
Caused By: java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1033_WLStub cannot be cast to oracle.jdbc.internal.OracleConnection
at oracle.jms.AQjmsGeneralDBConnection.getProviderKey(AQjmsGeneralDBConnection.java:96)
at oracle.jms.AQjmsGeneralDBConnection.<init>(AQjmsGeneralDBConnection.java:65)
Not sure what is missing in my AQ JMS configuration. Please help.
Regards,
Nagi

JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

hi,
i get by testing in PI 7.1 (operation mapping) this ERROR:
"Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
this is my java-programm-code:
import java.io.FileInputStream;
import java.io.FileOutputStream;
import com.sap.aii.mapping.api.StreamTransformation;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
/*IMPORT statement imports the specified classes and its methods into the program */
/Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
public class Mapping extends DefaultHandler implements StreamTransformation {
Below is the declaration for all the variables we are going to use in the
subsequent methods.
     private Map map;
     private OutputStream out;
     private boolean input1 = false;
     private boolean input2 = false;
     private int number1;
     private int number2;
     private int addvalue;
     private int mulvalue;
     private int subvalue;
     String lineEnd = System.getProperty("line.separator");
setParamater() method is used to store the mapping object in the variable
"map"
     public void setParameter(Map param) {
          map = param;
     public void execute(InputStream in, OutputStream out)
               throws com.sap.aii.mapping.api.StreamTransformationException {
          DefaultHandler handler = this;
          SAXParserFactory factory = SAXParserFactory.newInstance();
          try {
               SAXParser saxParser = factory.newSAXParser();
               this.out = out;
               saxParser.parse(in, handler);
          } catch (Throwable t) {
               t.printStackTrace();
As seen above execute() method has two parameters "in" of type
InputStream and "out" of type OutputStream. First we get a new instance
of SAXParserFactory and from this one we create a new Instance of
SAXParser. To the Parse Method of SaxParser, we pass two parameters,
inputstream "in" and the class variable "handler".
Method "write" is a user defined method, which is used to write the
string "s" to the outpurstream "out".
     private void write(String s) throws SAXException {
          try {
               out.write(s.getBytes());
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startDocument() throws SAXException {
          write("");
          write(lineEnd);
          write("");
          write(lineEnd);
     public void endDocument() throws SAXException {
          write("");
          try {
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startElement(String namespaceURI, String sName, String qName,
               Attributes attrs) throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = true;
          if (eName.equals("NUMBER2"))
               input2 = true;
     public void endElement(String namespaceURI, String sName, String qName)
               throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = false;
          if (eName.equals("NUMBER2"))
               input2 = false;
     public void characters(char[] chars, int startIndex, int endIndex)
               throws SAXException {
          String dataString = new String(chars, startIndex, endIndex).trim();
          if (input1) {
               try {
                    number1 = Integer.parseInt(dataString);
               } catch (NumberFormatException nfe) {
          if (input2) {
               number2 = Integer.parseInt(dataString);
          if (input2 == true) {
               addvalue = number1 + number2;
               mulvalue = number1 * number2;
               subvalue = number1 - number2;
               write("" + addvalue + "");
               write(lineEnd);
               write("" + mulvalue + "");
               write(lineEnd);
               write("" + subvalue + "");
               write(lineEnd);
in developer studio 7.1 i dont get error.
this happens by testing the mapping-programm in ESR.
can somebody help me please?

Make sure that the xml created out after the java mapping is a valid xml with only one root node.
Regards,
Prateek

O1034 Oracle not available error

Right, I'm running on a Windows Xp platform, I've installed ok and it runs ok. I have manually altered the password of user HR from within sqlplus, and everything is fine.The problem comes when I switch off and switch back on, I am unable to start the database.
Running sqlplus system/password gives me ORA-01034 Oracle not available and ORA-27101: Shared memory realm does not exist.
I have tried running stobdb.bat and startdb.bat which both run ok, but I still get the oracle not available error when going into sqlplus. It seems that the PC does not install the oracle set up on booting perhaps? I also cannot access the "Go to database home page", from my web browser, but I'm not sure if it is necessary to access that home page?

We are seeing this a little bit, and not sure what is causing it at this stage. Starting the database manually seems to help, or at least points to the root cause problems.
The steps to start the database manually are posted at Re: ORA-01033 after starting and trying to connect. and also posted below
To shutdown manually go to the SQL Command Line (as the OS user that installed Oracle).
At the SQL Prompt SQL> issue
connect / as sysdba
For example
SQL> connect / as sysdba
Connected.
Then type
shutdown immediate;
You should see the following
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
Then type
startup
You should see the following
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1249348 bytes
Variable Size 192942012 bytes
Database Buffers 402653184 bytes
Redo Buffers 2940928 bytes
Database mounted.
Database opened.
Just to be sure, also try a select
select count(*) from hr.employees;
You should see
SQL> select count(*) from hr.employees;
COUNT(*)
107
Any problems or errors reported with any of these steps, please let us know.

Analytical Services failed to get user's parent group tree with Error

Hi,
We have a frequent errror during our weekly batch for an application.
The context:
- Essbase Administration Services we are using is version is 9.3.1.
- 8 applications are calculated during the week-end. The scripts executed are exactly the same for the 8 applications.
- For example let's say that 5 scripts are launched during the night in the batch for each application (script 1, script 2 ... script 5)
- App1 and App2 are launched alone and before the 6 others applications as these applications database are 3 x bigger (App1 is calculated alone, then app2 is calculated alone, then app3 to app8 scripts are launched in the same time).
The issue :
- We don't see any issue for app3 to app8, the calculation are executed without any problem from script1 to script5.
- But we have an error in App1 and App2 log when the bath execute script 4 and we see the following error in the server log **
"Analytical Services failed to get user's parent group tree with Error".
(** : we don't see any log for script 4 in the application log - it's like the server bypass script 4 to go directly from script 3 to script 5 )
Nothing special is done in script 4 but just an aggregation of the Year dimension (using a @SUM(@RELATIVE(Year,0)) calculation.
I think that there is may be a synchronization error with Shared Services but what is strange is that it's always for the same script 4 and the batch is launched at different time every week-end.
Can the issue be linked to the size of the database of applications (8 Gb) and difficulties for the processor to executes aggregation in a large database volume ?

Hi,
According to your description, my understanding is that the error occurred when sending an email to the user in workflow.
Did you delete the existing Connections before setting NetBiosDomainNamesEnabled?
If not, I recommend to delete and recreate your AD connections, then set NetBiosDomainNamesEnabled to true.
Or you can delete the original User Profile Service Application and create a new one, then set the NetBiosDomainNamesEnabled to true and start the User Profile Service Application
synchronization.
More reference:
http://social.technet.microsoft.com/wiki/contents/articles/18060.sharepoint-20xx-what-if-the-domain-netbios-name-is-different-than-the-fqdn-of-the-domain-with-user-profile.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Does oracle log general errors

Dear experts,
I am using Oracle 11.2.0.3. I am researching on random ORA-00900:     invalid SQL statement error that we are seeing in production. Does oracle log such errors in alert.log or any tables? If not can we configure to log such errors?
Thanks.

Dont understand.... you are seeing ORA-00900 in production but don't know where to search this error? where do you see it?It is being logged from application in event log which I do not have access to. I wanted to check if oracle also logs such error some where.
SQL Banner : SQL*Plus: Release 11.2.0.1.0 Production on Wed Nov 28 12:12:25 2012
SQL :
SELECT
overload,
DECODE (
position,
0,
'RETURN_VALUE',
NVL (argument_name, CHR (0))
) AS name,
DECODE (
in_out,
'IN', 1,
'IN/OUT', 3,
'OUT', DECODE (argument_name, NULL, 6, 2),
1
) AS direction,
DECODE (
data_type,
'BFILE', 101,
'BLOB', 102,
'BYTE', 103,
'CHAR', 104,
'CLOB', 105,
'DATE', 106,
'DECIMAL', 107,
'DOUBLE', 108,
'INT16', 111,
'INT32', 112,
'INT64', 113,
'INTERVAL DAY TO SECOND', 114,
'INTERVAL YEAR TO MONTH', 115,
'LONG', 109,
'LONG RAW', 110,
'NCHAR', 117,
'NCLOB', 116,
'NVARCHAR2', 119,
'RAW', 120,
'REF CURSOR', 121,
'SINGLE', 122,
'TIMESTAMP', 123,
'TIMESTAMP WITH LOCAL TIME ZONE', 124,
'TIMESTAMP WITH TIME ZONE', 125,
'VARCHAR2', 126,
'XMLTYPE', 127,
'NUMBER', 107,
126
) AS oracleType,
DECODE (
data_type,
'BLOB', 0,
'CHAR', 0,
'CLOB', 0,
'LONG RAW', 0,
'NCHAR', 0,
'NCLOB', 0,
'NVARCHAR2', 0,
'RAW', 0,
'VARCHAR2', 2048,
0
) AS length,
NVL (data_precision, 255) AS precision,
NVL (data_scale, 255) AS scale
FROM
all_arguments
WHERE
data_level = 0
AND data_type IS NOT NULL
AND owner = :schemaName
AND package_name = :packageName
AND object_name = :methodName
ORDER BY
overload, position
******************** EXCEPTION PROPERTIES ********************
Errors: Oracle.DataAccess.Client.OracleErrorCollection
Source: Oracle Data Provider for .NET
Number: 900
ErrorCode: -2147467259
Data: System.Collections.ListDictionaryInternal
TargetSite: Void HandleErrorHelper(Int32, Oracle.DataAccess.Client.OracleConnection, IntPtr, Oracle.DataAccess.Client.OpoSqlValCtx*, System.Object, System.String, Boolean)
Edited by: spur230 on Nov 28, 2012 12:13 PM

ORA-01034: ORACLE not available error while creating ASM or database

Hi all,
I am using oracle database 10gR2 on windows 2000 pro system.
I have Installed oracle software and there was no issue with that but now I am facing ORA-01034: ORACLE not available error while trying to create asm instance or even while creating database through dbca.
I have tried creating the asm instance manually and it was succeeded. Also database creation was successful through manual steps.
Any idea guys?? How to resolve this issue??

Hi FK,
On Windows, it can sometimes mean that the services are not running. I have a check here:
http://www.dba-oracle.com/t_check_verify_windows_services.htm
Have you tried using oradim?
http://www.dba-oracle.com/tips_oradim_utility.htm
The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
The oradim utility is used on the Windows platform to perform these tasks.
C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
-starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
• startup – Indicates that the specified instance should be started.
• sid – The SID of the database to start.
• usrpwd – The password for the database user.
• starttype – Specifies whether to start the instance, the service, or both
Hope this helps. . .
Don Burleson
Oracle Press author

Oracle Secure Backup error: 'No such file or directory'

Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
jun

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

Oracle SQL DEVELOPER ERROR

Hello everyone
Can anyone here please help me with oracle sql developer error
My problem is that i have installed oracle sql developer as a root and now when i execute the following command
[root@localhost tmp]# sqldeveloper
Oracle SQL Developer
Copyright (c) 2008, Oracle. All rights reserved.
Type the full pathname of a J2SE installation (or Ctrl-C to quit), the path will be stored in ~/.sqldeveloper/jdk
/opt/oracle/softwares/jdk1.5.0.19
Error: /opt/oracle/softwares/jdk1.5.0.19/bin/java not found
As you can see i did install java but still i keep getting that error
Thank you

From what you have shown us, we can't tell that you have installed java. What do you get from the following command?
/opt/oracle/softwares/jdk1.5.0.19/bin/java -versiontheFurryOne

Tree List Error

I get the following error any time I click on a folder in my
tree list:
Error: Unable to load ''.
at mx.controls::SWFLoader/::loadContent()
at mx.controls::SWFLoader/load()
at
mx.controls::SWFLoader/mx.controls:SWFLoader::commitProperties()
at mx.core::UIComponent/validateProperties()
at mx.managers::LayoutManager/::validateProperties()
at mx.managers::LayoutManager/::doPhasedInstantiation()
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/::callLaterDispatcher2()
at mx.core::UIComponent/::callLaterDispatcher()
<b>Here's my code:</b>
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="dirListSvc.send();">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import flash.net.FileReference;
private var fileRef:FileReference;
[Bindable]
private var dirList:XML;
[Bindable]
public var selectedNode:XML;
//file browse function
private function fileBrowse():void {
this.fileRef = new FileReference();
fileRef.addEventListener(Event.SELECT, selectHandler);
fileRef.browse();
private function selectHandler(event:Event):void {
var request:URLRequest = new URLRequest("
http://localhost:8300/");
fileRef.upload(request);
// Event handler for the Tree control change event.
public function treeChanged(event:Event):void {
selectedNode=Tree(event.target).selectedItem as XML;
private function
directoryResultHandler(event:ResultEvent):void {
dirList = event.result as XML;
// Fault handler - displays the error
private function
directoryFaultHandler(event:FaultEvent):void {
Alert.show(event.fault.message, "Could not load dirList");
]]>
</mx:Script>
<mx:HTTPService
id="dirListSvc"
url="
http://localhost/iqAssets/scripts/directory.php"
resultFormat="e4x"
result="directoryResultHandler(event);"
fault="directoryFaultHandler(event);"
/>
<mx:HDividedBox>
<mx:VBox>
<mx:Tree x="10" y="10" labelField="@label"
dataProvider="{dirList}" width="250"
change="treeChanged(event)"/>
<mx:Button label="Upload A File"
click="fileBrowse()"/>
</mx:VBox>
<mx:Panel height="300" width="400"
title="{selectedNode.@label}">
<mx:Text text="{selectedNode.@path}" />
<mx:Image source="{selectedNode.@path}" />
</mx:Panel>
</mx:HDividedBox>
</mx:Application>
And here's my php:
<?php
function getDirectory( $path = '.', $level = 0 ){
$ignore = array( 'cgi-bin', '.', '..' );
// Directories to ignore when listing output. Many hosts
// will deny PHP access to the cgi-bin.
$dh = @opendir( $path );
// Open the directory to the handle $dh
while( false !== ( $file = readdir( $dh ) ) ){
// Loop through the directory
if( !in_array( $file, $ignore ) ){
// Check that this file is not to be ignored
$spaces = str_repeat( ' ', ( $level * 4 ) );
// Just to add spacing to the list, to better
// show the directory tree.
if( is_dir( "$path/$file" ) ){
// Its a directory, so we need to keep reading down...
echo '<node label="'.$file.'">';
getDirectory( "$path/$file", ($level+1) );
// Re-call this same function but on a new directory.
// this is what makes function recursive.
echo '</node>';
} else {
$filename = strtolower($file) ;
$exts = split("[/\\.]", $filename) ;
$n = count($exts)-1;
$exts = $exts[$n];
$imageExt = array ('gif', 'jpg', 'swf', 'png');
if ( !in_array($exts, $imageExt))
echo '<node label="'.$file.'" path=""/>';
else
$imgPath = substr($path, 1);
echo '<node label="'.$file.'" path="'."
http://localhost/iqAssets/scripts$imgPath/$file".'"/>';
closedir( $dh );
// Close the directory handle
echo '<node label="assets">';
getDirectory( "." );
echo '</node>';
?>

For what it's worth, I have the exact same error message:
quote:
Error: Unable to load ''.
at mx.controls::SWFLoader/::loadContent()
at mx.controls::SWFLoader/load()
at
mx.controls::SWFLoader/mx.controls:SWFLoader::commitProperties()
at mx.core::UIComponent/validateProperties()
at mx.managers::LayoutManager/::validateProperties()
at mx.managers::LayoutManager/::doPhasedInstantiation()
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/::callLaterDispatcher2()
at mx.core::UIComponent/::callLaterDispatcher()
Here's my code:
quote:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
horizontalAlign="center" verticalAlign="middle"
creationComplete="photoService.send();" >
<mx:HTTPService
id="photoService"
url="data.xml"
resultFormat="e4x"
result="photoResultHandler(event);"
fault="photoFaultHandler(event);"
/>

<mx:Script>
<![CDATA[
import flash.net.navigateToURL;
import mx.controls.Alert;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
[Bindable]
private var photoFeed:XML;
private function photoResultHandler(event:ResultEvent):void{
// Result handler - gets called after xml is loaded.
//Alert.show("Loaded xml!");
photoFeed = event.result as XML;
private function photoFaultHandler(event:FaultEvent):void{
// Fault handler - if the xml can't be loaded
Alert.show(event.fault.message, "Could not load photo xml");
]]>
</mx:Script>
<mx:Panel paddingTop="10" paddingBottom="10"
paddingLeft="10" paddingRight="10" title="phlex quick pic gallery
v0.8" fontWeight="bold" horizontalAlign="center" id="container">
<mx:Tile width="100%" height="100%">
<mx:Repeater id="photos"
dataProvider="{photoFeed.pic}">
<mx:VBox
xmlns:mx="
http://www.adobe.com/2006/mxml"
horizontalAlign="center"
>
<mx:Image
id="currentpic"
source="{photos.currentItem.attributes.url}"
/>
<mx:Text text="{photos.currentItem.attributes.title} by
{photos.currentItem.attributes.author}"/>
</mx:VBox>
</mx:Repeater>
</mx:Tile>
<mx:ControlBar id="nav" horizontalAlign="center"
verticalAlign="middle">
<mx:LinkButton label="previous" id="previous" />
<mx:Label text="3/18" fontWeight="normal" id="page" />
<mx:LinkButton label="next" id="next" />
</mx:ControlBar>
</mx:Panel>
</mx:Application>

Oracle BI Scheduler Error

Hi all,
I have created a request and added it to the dashboard. I have scheduled the request using Delivers. I have created an iBOT and when i save it the following error is thrown. What cud be the reason?
Oracle BI Scheduler Error: [nQSError: 68019] Authentication Failed.
Error Details
Error Codes: GYFPI8RN
Cheers.
Thank u.

Hi I also faced this problem..
see this link
http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/
you need to use the cryptotools utility to register the user name and password of the administrator user.
Edited by: kart on Apr 28, 2010 1:05 PM

Oracle Universal Installer - Error En Create OUI Process (): 5

When I want to install ODAC (Oracle Data Provider) for Visual Studio gives me the following error:
Oracle Universal Installer - Error En Create OUI Process (): 5
Thank You ..

What version of client are you trying to install? I'd go with 11.2.0.2 to rule out any known issues with the OUI.
11202 is available on MOS. If you don't have Oracle Support to be able to access MOS, 11201 is available in the downloads section on OTN.
Greg

OLE DB provider 'OraOLEDB.Oracle' reported an error The provider did not gi

Hi, I've setup oracle client tools on a windows server that runs sql server 7
tnsping works as well as the client tool test feature on my sid.
However, I can't seem to use it from SQL Server. I've installed and uninstalled the client tools many times, I'm beginning to think perhaps I installed the wrong package. Weird thing is there is no Listener listed in Windows Services, yet the listener I setup is working.
I enabled the allow in process property of both the MSADAORA and Oracle OLE drivers from SQL Server, help!!
SELECT * FROM OPENQUERY(ORACLE_MIRROR, 'select count(1) from dual')
RESULTS IN:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDAORA' reported an error.
[OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.]
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005:   ].
THIS IS AFTER I HAVE INSTALLED THE ORACLE 10.2 CLIENT TOOLS AND SETUP A LISTENER AND TESTED SIDS OK.
UTILIZING THE ORACLE OLE DRIVER IN THE LINKED SERVER I GET THIS ERROR:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the e

The MS OLEDB for Oracle was built some time ago and requires an older SQL*Net version:
OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
=> see Oracle Version V7.3.3 ... but you have installed V10; so the OLEDB driver from MS tries to locate old SQL*Net client library files which are not available in your installation anymore.
So best would be to use the Oracle OLEDB driver coming with the SQL*Net client you have installed.
As you mentioned this causes a different error:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the e
This error is related to the OLEDB process running by default in "out-of-process" mode which doesn't work with Oracle OLEDB driver. By setting a key in the registry under SQL Server this can be changed to run in-process (the default) the provider will work:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer\Providers\ORAOLEDB.ORACLE
Change the value of the key "AllowInProcess" under the "OraOLEDB.Oracle" folder
to a hexadeciaml value of 1.
If the key does not exist create it as a new DWORD value.
See also:
Article-ID:         Note 260775.1
Title:              ORA-12560 Attempting to Query the Oracle Database from
                    Microsoft SQL Server's SQL Query Analyzer Using the Oracle
                    Provider for OLE DB

ATP Tree Structure error -MATP

Hi Experts,
I am testing MATP with RBA, I could not see the planned orders in ATP tree structure once I saved the sales order in ECC.
Scenario -
I have product A (header) and A1 & A2 are the components of product A (Header)
I have stock on component A1 - 100 & component A2 - 100, STOCK on header material A -0
I have created sales order for header material A - customer requested quantity 201.
THEN system is confirming the sales order only for 100 qty because the components A1 & A2 stock available only 100.
I can see the dependent demand in rrp3 for Components A1 and A2
I can see the planned order in rrp3 for header material A
BUT I could not see any planned orders either in /SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning OR
/SAPAPO/ATREE_DSP - ATP Tree Structures
below is the error message I am getting in the transaction -/SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structure
What could be the wrong in the above case.. can you please suggest.. Advance thanks for your information.

Hi Experts,
Can someone please help in the below ATP Tree Structure error-
I am not able to covert the sales orders from the ATP Tree Structure
The error message as below - Transaction - /SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning
Can you just help me what could be the wrong in the setting and how to make the sales orders to be converted from this transaction /SAPAPO/RRP_ATP2PPDS
Error appears when I convert the sales orders from the ATP Tree Structure as below -
''The successor reqmts groups of the ATP tree structure were not converted''
Conversion canceled with error
ATP tree for sales order xxxx, item xx could not be converted
Thanks,

Oracle Tree VC++ Error

Similar Messages

Maybe you are looking for