Oracle Universal Installer (10.1.0.4) Hangs

I am trying to remove 'Oracle Application Server - Reports and Forms Services' using Oracle Universal Installer (10.1.0.4)
OS: Windows XP professional
folder: c:\oracle\FRHome_1
The uninstaller hangs and progress remains 0%.
Kindly let me know how to remove the software.

Are you trying to remove the specific components? or are you trying to remove the whole installation? Well bear in mind that removing a component is not as easy as removing it from the OUI, this has also been registered against the Identity Management (IM), so you must de-register it first, prior to attempt to remove it. If you just deinstall it, the OID will still be aware it has the component and you won't be able to reinstall it.
Proceeding directly to remove regedit entries without considering the previously recommendations may leave your installation corrupted and you may have to reinstall your Infrastructure (IS) and your Middle Tier (MT)
~ Madrid

Similar Messages

Oracle Universal Installer for 8.1.7 does not run

Downloaded and unzipped successfully ORACLE 8.1.7 EE for MS WINDOWS, when try to install, Oracle Universal Installer just stops reponding after a second or so without any message.
OPERATING SYSTEM MS WINDOWS 2000 SERVER SP3
Machine Intel P-IV 2.0A
RAM 512 MB
HD 10 GB NTFS partition on 60G IBM 7200 RPM H.disk.
ORACLE 8.1.7 EE for MS WINDOWS.
As this computer is not connected to any network yet,
After this Downloaded ORACLE 8.1.7 SE, unziped and tried to install it on the same machine. But this version behaved the same way. Can any body help?

You need to read Note:131299.1 available on Metalink.
ALERT: Oracle Installer 8.1.X Hangs on Machines with Pentium 4 Processors.
There is a patch available.

Mandrake Linux 8.0 - can't get Oracle Universal Installer to run

Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
     Mem: 525901824 116862976 409038848 0 6377472
61140992
     Swap: 1069244416 0 1069244416
     MemTotal: 513576 kB
     MemFree: 399452 kB
     MemShared: 0 kB
     Buffers: 6228 kB
     Cached: 59708 kB
     Active: 63740 kB
     Inact_dirty: 2196 kB
     Inact_clean: 0 kB
     Inact_target: 1072 kB
     HighTotal: 0 kB
     HighFree: 0 kB
     LowTotal: 513576 kB
     LowFree: 399452 kB
     SwapTotal: 1044184 kB
     SwapFree: 1044184 kB
     User Limits (in bytes except for NOFILE and NPROC) -
     RLIMIT_FSIZE : infinity
     RLIMIT_DATA : infinity
     RLIMIT_STACK : 2093056
     RLIMIT_CORE : 0
     RLIMIT_NOFILE : 1024
     RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]

I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck!

P6v7 Web Services Oracle Universal Installer Error Setting Java_Home veriab

Hi,
I am installing Primavera P6 v7 web serivces on a Ms Windows 2003 SP2 server machine but it gives error "error setting Java_Home environment variable" every time i run the oracle universal installer setup of P6 v7 web services. I have already installed Java JRE1.6.0_14 and set the JAVA_HOME variables in both system and user variables. I have also tried manually setting path of JAVA during setup but no luck so far everytime same error. I have been looking at the log file in oracle inventory folder but did not find any hint to resolve the issue.
Please suggest a solution or workaround.
Regards,
Shahid

r u using 32bit or 64bit java?? better to use 32 bit java. Create 3 variable for EPPM P6
1) variable name: JAVA_HOME Value: c:\Java32\JRE1.6.0_27
2) variable name: JRE_Location value: c:\Java32\jdk.1.6.0_27\jre
3) variable name: p6_java_home value: c:\Java32\jdk.1.6.0_27

Staging area needs Oracle universal Installer version 10.2.0.0.0 or later

Hi,
I am trying to install OEM agents thru run installer. but it says "staging area needs Oracle universal Installer version 10.2.0.0.0 or later", we are on we are on 10.1.0.5.0. How to download 10.2.0.0.0 or later.
Regards

# From Metalink click on "Patches & Updates” tab
# Select "Advanced Search”
# Enter "Universal Installer” under Product or Product Family
# Select "Oracle 10.2.0.0.0” release (Or higher)
# Select your Platform
# Change "Patch Type” to Any
# Change Classification to Any
# Click on Go

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Oracle Universal Installer tries to install an older Java Runtime

I downloaded the Rdb ODBC Driver for Windows with Oracle Universal Installer. The Installer would install JRE 1.3 but I already have 1.5.
How can I avoid this?
Thank you.

I installed the ODBC Driver with the Oracle Universal Installer.
Now I have the directory C:\Programme\Oracle\jre\1.3.1. This means that the installer has not detect my Java 5 installation and uses its own JRE 1.3.
I remains one question:
Who has done this?

[b]Can't not run the Oracle Universal Installer (Oracle8.1.7 for Linux) on

I have a problem when try to install Oracle8i Release 8.1.7 Enterprise Edition on RedHat Linux 7.3. After I do the pre-installation tasks, i enter the command (runs as the oracle user):
$ /tmp/Disk1/runInstaller
I wait for the one minute and then nothing is happen. I don't understand the reason why the Oracle Universal Installer can't not display! Please tell me all reasons may be!

Sorry the Oracle version should be 1.7 not 1.1.7. I downloaded it from the web site. The JRE I downloaded is jre 1.18 because the installer asked for this version.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bin Yao ([email protected]):
I have a problem to install Oracle8 1.1.7 for linux on Mandrake. When I run ./runIstaller I got a error message that the Java RunTime Enviroment was not found at ?/bin/jre. The "?"stands for a strange character and may change at diffrent time runing the installer. I downloaded a JRE from blackdown and make a link to /usr/local/jre and I also tried to make link to the JRE shiped with Oracle8 1.1.7. But I still get same error. Does Oracle8 1.1.7 still need JRE downloaded and insatll(or link) to /usr/local/jre? I don't know what else I can try. Please give me a help. Thanks.<HR></BLOCKQUOTE>
null

How to uninstall oracle components silents using oracle universal installer in oracle client 11.2.0.3.0?

Hi,
I have installed oracle client 11.2.0.3.0 silently using the response file with INSTALL type as runtime. I want to remove 'Oracle sql developer' from the installed products. Using Oracle Universal Installer I am able to remove this component in GUI. Please provide me the silent switch to remove this component. I have tried with DEINSTALL_LIST property , but I am getting an error that 'no products selected for deinstall'. Please suggest on this.

Pl post your OS details
AFAIK, SQL Developer is not included in the Oracle Client install - it is a separate install. You will have to follow the instructions for uninstalling SQL Developer - check the docs for your specific version of SQLD - Oracle SQL Developer
e.g. for 3.1, see Installing Oracle SQL Developer

"Oracle Universal Installer" instead of "Oracle Webcenter Suite 10.1.3.2.0"

Hi,
I've installed HTTP_Server from [Oracle HTTP Server (Apache 2.0) (10.1.3.3.0) for Microsoft Windows (32-bit)|http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html] ; unfortunately, I was unable to control the installation process (select advanced install, password, hostname, port number...), because I got the "Oracle Universal Installer" instead of the "Oracle Webcenter Suite 10.1.3.2.0 Installation" screen, as shown in the installation documentation.
Although I suspect I'll be able to configure via the various configuration files, I've had to install every single component, instead of just the one I need. Has anyone encountered the same problem and know how to fix it?
Thanks,
Chris.

Actually, my problem is that I was not prompted to choose between basic and advanced; that's in the "Oracle Webcenter Suite 10.1.3.2.0 Installation" screens, as seen in the installation instructions. But the "Oracle Universal Installer" screen that I get when I click setup.exe doesn't give you that choice.
This isn't actually a big deal, because HTTP_Server was still correctly installed, but I had to configure it manually. I'm just trying to figure out why it is that I didn't get the correct installer.
Does anyone know how I can get the "Oracle Webcenter Suite 10.1.3.2.0 Installation" application instead of the "Oracle Universal Installer"?
Edited by: gers32 on Nov 20, 2009 5:58 AM

9i's Oracle Universal Installer problem in W2K server! Please Help.

Hi all,
I am trying to install Oracle database 9i on my w2k server (domain controller). The Oracle Universal Installer quits right after I choose install in autorun menu with this message:
'Error in writing to directory C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall. Please ensure that this directory is writable and has at least 25 MB of Disk Space. Installation could not continue.'
I am installing as the administrator of the domain/server and I have 17GB left on my harddisk. I am using a P3 600 with 384 MB of RAM. My HD is Seagate ATAIV Baracuda and my motherboard uses VIA chipset.
Thanks in advance for your help.
Regards,
Hartono

I am using Diamond TNT2 video card. I have tried to install new (not newest) detonator drive and VIA 4 in 1 driver ver4.29 but it still gives me the error. Would it help if I install Java2 runtime on this computer?
Regards,
Ari

Certain files which need to be reinstalled by oracle universal installer

I am applying patch and getting error......
10g Release 2 (10.2.0.4) Patch Set 3 for Microsoft Windows (32-Bit) on 10.2.0.1.0.
ERROR:
Certain files which need to be reinstalled by oracle universal installer
are being used by one or more running services'. It contains a list of 30 services. All oracle services are already shutdown.
I have stopped all Oracle services, set it to manual, and restarted the system...but am getting the same error again...
I am trying it since yesterday...but really tired of this error. what could be the reason...
please help

I have got some options please check it.
LIVE DB Name - ERP
TESTDB Name - TEST
1. Should I create another home/database TEST
1.1 apply patch on it and then uprgrade it.
1.2 Restore the cold backup of ERP database on it.
OR
2. Should I create another home/database TEST
1.1 Restore the cold backup of ERP database on it.
1.2 apply patch on it and then uprgrade it.

Oracle Universal Installer in Linux error

I did as follows:
Double check that you are logged in as oracle and not root, and that the environment variables have been set by the login script you prepared earlier. Then change to your home directory and start the Oracle Universal Installer with a command like one of the following:
$ /database/runInstaller
or
$ /runInstaller
, but got the following error:
[oracle@dgdba ~]$ /media/Oracle\ 11g\ Svr/linux_11gR2_database_1of2/database/runInstaller
dirname: extra operand `11g'
Try `dirname --help' for more information.
/media/Oracle 11g Svr/linux_11gR2_database_1of2/database/runInstaller: line 137: /home/oracle//install/.oui: No such file or directory
[oracle@dgdba ~]$
Does anyone have any idea why I'm getting these error and how I can fix them
I tried creating the directories in this path /home/oracle//install/.oui and used the touch command to create the .oui file. The I did a chown -R oracle:oinstall on all the directories and files except the /home directory in the following path /home/oracle//install/.oui, but I still got the following error:
[oracle@dgdba ~]$ /media/Oracle\ 11g\ Svr/runInstaller
dirname: extra operand `11g'
Try `dirname --help' for more information.
[oracle@dgdba ~]$
Then I tried the following and got the following errors:
[oracle@dgdba home]$ cd /home/oracle
[oracle@dgdba ~]$ cd /home
[oracle@dgdba home]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba home]$ cd /home/oracle
[oracle@dgdba ~]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba ~]$ ls -l /home/oracle
total 16
drwxr-xr-x 2 oracle oinstall 4096 Mar 10 18:25 install
drwxr-xr-x 3 oracle oinstall 4096 Mar 10 18:34 source
[oracle@dgdba ~]$ cd /home/oracle/source
[oracle@dgdba source]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba source]$ ls -l /home/oracle/source
total 8
drwxr-xr-x 3 oracle oinstall 4096 Mar 10 18:35 database
[oracle@dgdba source]$ cd /home/oracle/source/database
[oracle@dgdba database]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba database]$ ls -l /home/oracle/source/database
total 8
drwxr-xr-x 2 oracle oinstall 4096 Mar 10 18:35 install
[oracle@dgdba database]$ ls -l /home/oracle/source/database/install
total 0
[oracle@dgdba database]$ cd /home/oracle/source/database/install
[oracle@dgdba install]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba install]$

993126 wrote:
I did as follows:
Double check that you are logged in as oracle and not root, and that the environment variables have been set by the login script you prepared earlier. Then change to your home directory and start the Oracle Universal Installer with a command like one of the following:
$ /database/runInstaller
or
$ /runInstaller
, but got the following error:
[oracle@dgdba ~]$ /media/Oracle\ 11g\ Svr/linux_11gR2_database_1of2/database/runInstaller
dirname: extra operand `11g'
Try `dirname --help' for more information.
/media/Oracle 11g Svr/linux_11gR2_database_1of2/database/runInstaller: line 137: /home/oracle//install/.oui: No such file or directory
[oracle@dgdba ~]$
Does anyone have any idea why I'm getting these error and how I can fix them
I tried creating the directories in this path /home/oracle//install/.oui and used the touch command to create the .oui file. The I did a chown -R oracle:oinstall on all the directories and files except the /home directory in the following path /home/oracle//install/.oui, but I still got the following error:
[oracle@dgdba ~]$ /media/Oracle\ 11g\ Svr/runInstaller
dirname: extra operand `11g'
Try `dirname --help' for more information.
[oracle@dgdba ~]$
Then I tried the following and got the following errors:
[oracle@dgdba home]$ cd /home/oracle
[oracle@dgdba ~]$ cd /home
[oracle@dgdba home]$ /runInstaller
-bash: /runInstaller: No such file or directoryyou told the shell processor to execute a file named "runInstaller", found in the root directory "/"
[oracle@dgdba home]$ cd /home/oracle
[oracle@dgdba ~]$ /runInstaller
-bash: /runInstaller: No such file or directorychanging directories is pointless, you still told the shell processor to find "runInstaller" in the root directory.
[oracle@dgdba ~]$ ls -l /home/oracle
total 16
drwxr-xr-x 2 oracle oinstall 4096 Mar 10 18:25 install
drwxr-xr-x 3 oracle oinstall 4096 Mar 10 18:34 source
[oracle@dgdba ~]$ cd /home/oracle/source
[oracle@dgdba source]$ /runInstaller
-bash: /runInstaller: No such file or directoryDoesn't matter to prove what is in a particular directory, then change directories. And still telling the shell processor to find "runInstaller" in the root directory.
[oracle@dgdba source]$ ls -l /home/oracle/source
total 8
drwxr-xr-x 3 oracle oinstall 4096 Mar 10 18:35 database
[oracle@dgdba source]$ cd /home/oracle/source/database
[oracle@dgdba database]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba database]$ ls -l /home/oracle/source/database
total 8
drwxr-xr-x 2 oracle oinstall 4096 Mar 10 18:35 install
[oracle@dgdba database]$ ls -l /home/oracle/source/database/install
total 0
[oracle@dgdba database]$ cd /home/oracle/source/database/install
[oracle@dgdba install]$ /runInstaller
-bash: /runInstaller: No such file or directory
[oracle@dgdba install]$You can change directories until the cows come home, but it doesn't matter as long as you keep telling the shell processor to find "runInstaller" in the root directory.
find /home/oracle -name runInstaller -ls -lcd to whatever directory you find is the location for runInstaller. Let's say it is in /home/oracle/source/database
cd /home/oracle/source/database
./runInstallerNote that is dot, slash, filename. The 'dot' says 'look for the file in the current directory'. when you say '/runInstaller' you are saying to look for the file in the root directory.
Oh, and make sure you can execute xclock or xeyes first. If you can't, you won't be able to execute runInstaller either.

Getting error while running Oracle universal installer to run the deinstall

I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

Oracle Universal Installer response files and platform independency

Hi all,
The Oracle Universal Installer is a platform-independent system, to what extent are Oracle Universal Installer response files platform-independent? For sure it's not completely platform-independent, because path definitions aren't portable - Windows versus Linux for example. My hope is that all possible variables within response files are exactly the same as on different platforms. Also the possible values for the variables should be portable, except for the path definitions, of course.
Can anyone confirm that my thoughts are true?
Durk

Hi,
This problem frequently occurs because of the wrong DISPLAY settings. Please perform the steps on a X-term terminal screen;
1) under root user
2) xhost +
3) su - ora<sid>
4) echo $DISPLAY
5) setenv DISPLAY <client ip>:(result of echo $DISPLAY) (for example setenv DISPLAY 192.168.1.100:0.0)
6) xclock (test X-Client)
If it works then you will be able to run "./runInstaller", for example
cd /oracle/stage/102_64/database/Disk1/SAP
./RUNINSTALLER
You can check the [installation guide|https://websmp204.sap-ag.de/~sapidb/011000358700000359232008E], also. Search for "4.4.3 Running the Oracle Universal Installer" title and read the details,
Best regards,
Orkun Gedik

Oracle Universal Installer (10.1.0.4) Hangs

Similar Messages

Maybe you are looking for