Oracle Universal Installer not working for 64 bit

Hi all, since I could not get the 32 bit ODP to work for me I decided to try the 64 bit but when I proceed to lauch the 64 bit installer I get the following message on my 64 bit machine.
Java(tm) 2 Platform Standard Edition binary has stopped working.
A problem caused the program to stop working correctly. Windows will close the program, and notify you if a solution is available.
Does anyone know why this might be?
Thank you,
John

I am not sure what an SO is.
As for the OS that I am using. My client Development Machine is running x64 Vista Ultimate and so far nothing works on it.
I am trying to programatically connect to an Oracle Express Edition on a Linux machine that has the same hardware as my dev server above (AMD 64).
I am also trying to not vent on this forum about the poor quality of product that I have experienced so far with Oracle as nothing that I have installed so far has worked. Please see my other recent Posts.
Thank you,
John

Similar Messages

ODI not working for 64 bit OS

Hi all,
I am trying to install ODI on my 64 bit OS system but can not do so. i downloaded the software from
http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
is there any workaround to install the software or can anyone point me out the link where i can download software for 64bit OS.
thanks in advance..

hi babani,
i have installed
Windows x64 59.67 MB jdk-6u33-windows-x64.exe
and generic version of ODI 11g and trying to install from command prompt and typed following command.
setup.exe -jreloc c:\programming files(x86)\java\jdk1.6.0_33 ( which is my jdk location)
it opened oracle universal installer but asking for jdk location again
**please specify jdk location <ex./home/jdk>,<location>/bin/java should exists:**
i do not know where i am making mistake..... your help is appreciated.

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Oracle Universal Installer not launching

Hello all,
I have been facing a strange issue. I am trying to run Oracle Universal Installer in Aix5.3 platform to upgrade db patchset but for some reason it does not come up. I am trying to launch it through VNC session using vncviewer. Whenever i run runInstaller as ora<sid> user ...it just takes long time and nothing happens. The message i get is:
All installer requirements met:
Preparing to launch Oracle Universal Installer from /tmp/OraInstall...........Please Wait .....<hostname>:ora<sid>.....
This is all i get but OUI doesnt not come up.. can anyone please tell me what seems to be the issue?
thanks

Hi,
This problem frequently occurs because of the wrong DISPLAY settings. Please perform the steps on a X-term terminal screen;
1) under root user
2) xhost +
3) su - ora<sid>
4) echo $DISPLAY
5) setenv DISPLAY <client ip>:(result of echo $DISPLAY) (for example setenv DISPLAY 192.168.1.100:0.0)
6) xclock (test X-Client)
If it works then you will be able to run "./runInstaller", for example
cd /oracle/stage/102_64/database/Disk1/SAP
./RUNINSTALLER
You can check the [installation guide|https://websmp204.sap-ag.de/~sapidb/011000358700000359232008E], also. Search for "4.4.3 Running the Oracle Universal Installer" title and read the details,
Best regards,
Orkun Gedik

Keyboard does not work for 64 bit applications

Hello,
I hope someone can help me with this strange problem.
I can not use my keyboard for applications running in 64 bit mode. E.g. Adobe Lightroom 2 or the Chess application that came with the OS.
When I start up this applications in 32 bit mode everything is working.
Regards,
Do lo

Welcome to the Apple forums:
I had been using my mouse for the chess game, but I just tried typing
e2 e4 and it worked. I presume that's what you mean by keyboard
The activity monitor says it is a 64-bit Intel app.
It's version 2.3 if that helps.
Interesting that the voice commands do not work for me. After calibrating and seeing that the test commands work in the calibration window, the command for the chess game all result in a question mark. It hears, it does not understand. Ditto in 32-bit mode.
Cannot help you with Adobe
Message was edited by: nerowolfe

ERP 2004 IDES - Oracle DB installation not working

Hello,
I'm in the process of installing ERP 2004 IDES in our test environment but I seem to have problems with the Oracle installation. I followed all the steps from the guides and double clicked the file sapserver.cmd but nothing happens, just a quick flash. Any suggestions / assistance would be appreciated.
Thanks
Frank

Frank,
You can start the oracle universal installer in 2 ways
1) by executing the script sapserver.cmd
2) by clicking the setup.exe from I386\install folder
Thanks,
Mohan

Universal Installer not working

Hi All,
On my windows vista laptop I was having oracle 10g enterprise edition 10.2.3 it was working fine.Then I uninstalled using universal installer and try to install oracle 11g on the same laptop but some how it was not installed. now I am trying to install same oracle 10g enterprise edition 10.2.3 using universal installer nothing is happen.
when I was trying to reinstall oracle 10g it was not installing properly so I restore my windows system 2 days back where oracle 10g was working fine. But after restore windows I look in to oracle home I saw only folders call (1)Application Development and its sub applications (2)configuration and migration tool and its sub applications (3)Integrated management tool and its sub applications (4)Oracle installation products and its sub applications I can't see any database. now I can't create new database or uninstall oracle using universal installer. can you plz tel me what do I do next to ger my oracle 10g back on my laptop.
when I launch universal installer
just windows show me a message
"unidentified program is trying to access your computer
setup.exe
Cancle
Allow"

user5416657 wrote:
Hi Srini,
Now I know that oracle 11g is not supported on windows vista home premium, now Help me to install oracle 10gNot just 11g .... NO Oracle product is support on ANY "home" edition of ANY version of Windows.

Windows Installer Not Working for Itunes 64

I just got a touch and it says I have to use Itunes 64 bit. So I go download 8.02 64 from the apple site but when I try to install it a popup comes up and say windows installer could not be accessed. So I can't install it. I have vista 64bit home prem and was wondering if anyone has a solution yet? I have tried a lot of google solutions but none seem to work. Thanks

Hi Darrien,
What is the name of the iTunes installer file?
You may have to download iTunes again using Internet Explorer.
http://www.apple.com/itunes/download/
+"Note: The installer for 64-bit Vista is named iTunes64Setup.exe instead of iTunesSetup.exe. If you download the iTunes installer from iTunes.com using Vista 64 and the file is iTunesSetup.exe, your browser is likely not correctly identifying the OS as being Vista 64. Try downloading iTunes again using a different browser, like Internet Explorer."+ from http://support.apple.com/kb/HT1426
-Jason

Oracle text search not working for WSDL files

I have a table (resources) with blob data type column (xml_data) and I've created context type index on that column. I've XSD and WSDL files stored in that blob column.
I can search XSD and XML files with a query with contains operator. But any search on the words from wsdl file returns zero results.I am not able to perform search on wsdl file.
Please advise me whether oracle text can work for WSDL files also ?
Query details
===========
create index myIndex on resources (xml_data) indextype is ctxsys.context;
select * from resources where contains(xml_data, 'searchword') > 0
Thanks a lot,
Santhi

Even though it isn't listed specifically, I can't see why it wouldn't work. The WSDL file should be a simple XML file, so in theory it shouldn't be any different to Oracle Text than the XML file that you loaded and searched successfully. Did you get any errors during indexing, and what do your tokens look like in the DR$MYINDEX$I.TOKEN_TEXT column?
Do you have a mini test case that didn't work for you? Perhaps we could play with it a bit.
Long term you might want to consider using section groups so that you can search "within" tags.
-Ron

Oracle Universal Installer not showing ClusterWare option

Hi,
Why I can't see the third option " Oracle Clustware" while running Universal Installer ??
The above 2 options are
Oracle database 11g
and Oracle Client

Hi;
Did you donwload related setup from below link?
http://www.oracle.com/technology/software/products/database/oracle11g/111060_win32soft.html
I also suggest move your thread to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which could get more quick response
Regard
Helios

Oracle Universal Installer not showing up

Hi Everyone,
I try to install Oracle 9.2.0.2 on Linux Itanium 64 bit. The problem is, after invoking runInstaller as ./runInstaller, I see the following messages.
Initializing Java Virtual Machine from /tmp/OraInstall2009-11-16_10-49-47AM/jre/bin/java. Please wait...But, OUI is not starting up even after a long time. I am invoking "runInstaller" from remote machine over VNC. The machine that I am going to install 9.2.0.2 has Oracle 10.2.0.4 alreading running. What could be the possible reason for OUI not showing up?
Regards,
...

Check if anything is running "ps -ef | grep java"
How long did you wait ? Sometime it is slow to do checks.
You can disable checks with the "-ignoreSysPrereqs" parameter

Photoshop CS4 serial not working for 64 bit

Ok heres the story, ive been using my copy for about 8 months straight without any problems, yesterday I start up photoshop as I do every day and BLAM, it tells me the serial Ive been using is no longer valid.
When i try to re enter the serial it gives me a big fat red cross.
The weird thing is that the 32bit version seems to work just fine.
I already tried re installing the program, used the CS4 cleaning utility and whatnot, but still the same problem, 64 bit asks for serial, 32bit works, I have 8 gigs of ram in my rig and hate to let it all go to waste by using the 32 bit, so if anyone has any clue about my problem, please share.
Cheers

Sounds like a specific part of the licensing service does not launch. Have you checked your event viewer and your Services panel?
Mylenium

Firefox installer not working for Windows 8.1?

I downloaded the latest Firefox installer and tried to run it. I got the Windows prompt to accept the software install, and then...... nothing. The installer never runs. Does anyone know what seems to be the issue?

Jscher you rock! That totally worked.
Thank you for saving me from being condemned to using IE!

[b]Can't not run the Oracle Universal Installer (Oracle8.1.7 for Linux) on

I have a problem when try to install Oracle8i Release 8.1.7 Enterprise Edition on RedHat Linux 7.3. After I do the pre-installation tasks, i enter the command (runs as the oracle user):
$ /tmp/Disk1/runInstaller
I wait for the one minute and then nothing is happen. I don't understand the reason why the Oracle Universal Installer can't not display! Please tell me all reasons may be!

Sorry the Oracle version should be 1.7 not 1.1.7. I downloaded it from the web site. The JRE I downloaded is jre 1.18 because the installer asked for this version.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bin Yao ([email protected]):
I have a problem to install Oracle8 1.1.7 for linux on Mandrake. When I run ./runIstaller I got a error message that the Java RunTime Enviroment was not found at ?/bin/jre. The "?"stands for a strange character and may change at diffrent time runing the installer. I downloaded a JRE from blackdown and make a link to /usr/local/jre and I also tried to make link to the JRE shiped with Oracle8 1.1.7. But I still get same error. Does Oracle8 1.1.7 still need JRE downloaded and insatll(or link) to /usr/local/jre? I don't know what else I can try. Please give me a help. Thanks.<HR></BLOCKQUOTE>
null

Oracle Universal Installer for 8.1.7 does not run

Downloaded and unzipped successfully ORACLE 8.1.7 EE for MS WINDOWS, when try to install, Oracle Universal Installer just stops reponding after a second or so without any message.
OPERATING SYSTEM MS WINDOWS 2000 SERVER SP3
Machine Intel P-IV 2.0A
RAM 512 MB
HD 10 GB NTFS partition on 60G IBM 7200 RPM H.disk.
ORACLE 8.1.7 EE for MS WINDOWS.
As this computer is not connected to any network yet,
After this Downloaded ORACLE 8.1.7 SE, unziped and tried to install it on the same machine. But this version behaved the same way. Can any body help?

You need to read Note:131299.1 available on Metalink.
ALERT: Oracle Installer 8.1.X Hangs on Machines with Pentium 4 Processors.
There is a patch available.

Oracle Universal Installer not working for 64 bit

Similar Messages

Maybe you are looking for