Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Hello Gurus,
Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
I want to upgrade Hardware to x86 EMT64bit
I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
Please guide me about request shipping DVD For This Solution to my site
Many thank in advance
Kuekul

Hi
You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5
RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5
RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5
RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5
RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
ZIP 51033272 ORACLE 10.2 Client
ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit
ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit
ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit
Regards
Uday

Similar Messages

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Steps to upgrade oracle database from11.2.0.1 to 11.2.0.3 on Windows 2003 3

Hi,
Upgrade steps
1. Install 11.2.0.3.0 rdbms software
11.2.0.3 patch set is a full release.
Beginning with the release 11.2.0.3 patch set, you have two ways to apply a patch set
i)Out-of-place upgrade (Recommended) -- 11.2.0.3 will be installed as standalone at another location. So there is no impact on source oracle home and also DB upgrade will take less time
See Note 1276368.1 : Complete checklist for out-of-place manual upgrade from 11.2.0.1 to 11.2.0.2 , it is applicable for 11.2.0.3 as well
ii)in-place upgrade - 11.2.0.3 will be installed on top of 11.2 installation, So source oracle home will be replaced, Downtime will be high comparing out of place upgrade
for more info, Please refer to
Note 1189783.1 Important Changes to Oracle Database Patch Sets Starting With 11.2.0.2
11.2.0.3.0 software can be downloaded from My Oracle support: patch 10404530
https://updates.oracle.com/download/10404530.html
Please select your platform before downloading (Click on "Platform or Language" drop down menu)
if the platform name contains (32-bit) then it's 32-bit 11.2.0.3 client version
To install 11.2.0.3, you must download both p10404530_112020_<platform>_1of7.zip
and p10404530_112030_<platform>_2of7.zip
<platform> = your platform( ie for linux x86, download p10404530_112030_LINUX_1of7.zip and
p10098816_112030_LINUX_2of7.zip )
Note 1194734.1 : Where do I find that on My Oracle Support (MOS) [Video]
Note 549617.1 : How To Verify The Integrity Of A Patch/Software Download? [Video]
Note 169706.1 : Oracle Database Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2)
2) Finish the post installation steps as per the patchset README (readme.html).
3) upgrade the database to 11.2.0.3
Kindly ensure source database has all Valid DB components(dba_registry) and there are no invalid sys/system objects
Note 419550.1 : Different Upgrade Methods For Upgrading Your Database
Note 837570.1 : Complete Checklist for Manual Upgrades to 11gR2 (applicable to 11.2.0.3)
Note.870814.1 : Complete checklist to upgrade the database to 11gR2 using DBUA (applicable to 11.2.0.3)
4) After db upgrade, you can apply PSU patch of 11.2.0.3, it will give latest bug fixes of 11.2.0.3
The latest PSU patch is (Reference: Quick Reference To Patch Numbers For Database PSU, CPU And Bundle Patches (Doc ID 1454618.1))
14727310 (11.2.0.3.5) Jan 2013 DATABASE 11.2.0.3
Patch readme file has Installation instructions.
Oracle Database Upgrade Path Reference List (Doc ID 730365.1)
Thanks,
Krishna

Effects of Oracle Upgrade from 10.2.0.1(32bit) to 10.2.0.4(64bit)

We are planning a Database Server upgrade. The current configuration is Red Hat Linux 4 (32Bit) and Oracle Database Enterprise 10.2.0.1 (32Bit). The proposed configuration is Red Hat Linux 5 (64Bit) and Oracle Database Enterprise 10.2.0.4 (64Bit).
No plans to change the middle-tier servers:
O/S- Windows 2003
OAS- Oracle Application Server Lite [Forms and Reports Service]- Version 10.1.2.0.2 .
No plans to change the development tools:
O/S- Windows XP SP2
Oracle Forms and Reports - (32Bit) Version 10.1.2.0.2 .
Has anyone encountered any gotchas/compatibility issues we should be aware of ? Do we need to upgrade the middle-tier and Developer Tools at the same time ?
Many thanks in advance for any advice.

Our forms application runs against a databases runnung on lot of platforms, like
HP-UX, AIX, WinServer 2k3, RedHat, Suse,...32 and 64 bit from 9.2.0.8 up to 10.2.0.4...
our development database is a 9.2.0.6 Windows Server 2003 32bit, and I haven't faced any problems on other platforms after moving to them (except the platform specific database bugs).
Only thing I can remember would be, if you make use of the utl_file package on the database - I'm sure you know the dos2unix and unix2dos fileformat problem.
so if you don't plan to change the middle-tier servers you should not run into serious problems (except a recompile of your forms against the new database could be necessary) to my mind. No need for changing middle tier and developer toos.
regards

Oracle Upgrade from Oracle RAC 9.2.0.6 to Oracle 10.2.0.4

Hi All,
Currently, we are running 4 node Oracle RAC environment with below mentioned configuration.
OS: Sun Solaris 5.9
Hardware: Sun E2900
Oracle Version: 9.2.0.6
Veritas Cluster Server: 4.1
We want to upgrade Oracle version to 10g, and currently analyzing the options to perform this. The current database size is 1TB appx and we want to spend minimum application shutdown time running on this database.
As part of upgrade, we also need to upgrade Veritas Cluster Server from 4.1 to 5.1 to support Oracle 10g. It would be great help,, if someone can pass some guideline to perform this task.
We are currently thinking about piecemeal approach, where we can upgrade each node individually and then put them back to cluster. There are some complexities involved, and its really high risk approach.
Thanks a lot in advance for help
Regards,
Manoj

Orcale 10g RAC requires you to install Oracle Clusterware. Oracle Supports running it along side a 3rd party clustering software. Not sure why you're so anxious to upgrade Veritas Clusterware when it will be trivial on the 10g db hosts.

Access a view on a 32 bit Oracle 9i from a MS SQL 2008 R2 64 bit

NOt sure if this is the right forum for this.
We need to access a view on a 32 bit Oracle 9i - Release 9.2.0.8.0 database running on Windows 2003 Server, from a MS SQL 2008 R2 64 bit system running on Windows Server 2008 64 bit.
Edited by: 854859 on Apr 26, 2011 3:21 PM

When yu want to access a view hosted in Oracle and retrieve data from this view in a MS SQl Server, then you need to use MS SQL Server Linked Server mechanism based on OLEDB/ODBC.
Since MS SQL Server this feature is integrated in MS Integration Services and more details can be found at the MS knowledge base.

Oracle Upgrade from 8.1.7.4 to 9.2

Hi ALL,
I am having a problem when i am trying to upgrade oracle from 8.1.7 to 9.2.
I have installed Oracle 9i in seperate oracle home directory than the original 8.1.7 home directory. After that i have removed oracle_home = sid from <SID>adm user environment as described in sap upgrade manual.i have logged in again to activate the variables. When i am trying to start database upgrade assistant in new oracle 9i. it is showing me the old oracle home and asking me to upgrade. when i press enter..it is erroring out saying ora 12560 error.
Guys, could you please let us know why these error occured. Did i miss something as i followed sap document on oracle upgrade.
Thanks in advance..

Hello vales,
Even i dont know how it worked .. upgrade assistant started working when i logged in with administrator account with which i installed oracle installations...
Thanks

Issue in oracle upgrade from 9i to 10g.

Hi,
I have an MS access application running on oracle database.Recently database is upgraded from 9i to 10g.
After upgrade application is facing the conversion problem.it is throwing an error on varchar and time stamp field showing invalid timestamp message.NLS setting of both the version is same.Please suggest.

Thank you,
Here are the answers of your queries.
Yes,This is affecting only MS access application because no other application is accessing this database.
No,No other component of the application is changed or upgraded it is only database which is upgraded.
The error is ORA-06502:PL/SQL:numeric or value error:Character to number conversion error.(In the application the value of this field is defind as Double and in database table it is VarChar and the system was working fine untill database upgrade after upgrade it is giving above error.)
For another field it is giving the error "No valid timestamp" although the same was working fine before upgrade.
No I have not traced the actual sessions but from the backup of 9i I have checked NLS setting and compared it with 10g and found that both are the same.
Hope I have not confused you.

Oracle upgrade from 9i

Dear all,
Currently we are using SAP R/3 4.7 on HP-UX with RDBMS oracle 9i. As we know, oracle 9i is out of support so now we want to upgarde it. Can u suggest me some questions relarted to this...
1. How much down time it will require for successfull upgardation from 9i to 10g or 11g?
2. We should go for 10g or 11g?
3. Will the oracle software chargeable from SAP service marketplace site as we already have license for R/3 and oracle 9i from SAP?
Thanks in advance.
Regards,
Ankit Gupta

Hi
Recently we have done an upgrade from Oracle 9i R2 to Oracle 10g rel2 ( patch 10.2.04 )
Answering to your questions :
1. For the planning , please perform the same in the Sandboxes first. The process will be that you bring down SAP, perfrm a database upgrade , and then bring SAP up again.
For the DB upgrade , please go though the documented process and have all the requirements ready before doing the same in the Production System as it involves lots of Unix intervention.
In the sandbox , it took us a lot of time , however the expertise developed helped us in doing the Production upgrade in about 2-3 hours.
2. No , please upgrade to 10gr2 only now. it is well supported by Oracle and SAP
3. There will no extra charge for upgrading to oracle 10gr2 if you are having Licensed Oracle 9i software. U can get the CD's through Metalink SR .
Let me know if u need more information
Rishi

How to access Oracle 8g from SQL Server 2005 SP3 EE 64 Bits ?

Dear All,
How to access Oralce 8g from SQL Server 2005 SP3 EE 64 Bits (liked server).
Best regards,
Miguel Gavinhos

Hi!
For the Oracle version is 8.1.6. what should I install, to access Oracle trought a linked server.
Best regards
Miguel Gavinhos

Step by Step procedure of SAP upgrade + Oracle upgrade from 4.6C to ECC 6.0

Hi Chaps,
Could you please provide the step by step procedure of end to end SAP Upgrade which includes oracle database upgrade as well..and post upgrade process tooo....
Thanks
Keshav

There is nothing like that.
Each system is different, each application is different; on top of that it would be WAY too much to post here.
Get your upgrade guides:
http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
-> SAP ERP 6.0
--> Upgrade
--> Upgrade Documentation - SAP ERP 6.0 SR3
Here choose your OS and platform and read all the notes. Be prepared to use a week just for technical preparation and documentation/notes checking before you even doubleclick on something.
For the Oracle Upgrade use
http://service.sap.com/instguides
--> Other Documentation
--> Database Upgrades
--> Oracle
Markus

It's possbile to upgraded from win2003 x64 sp2 which installed SCOM 2007 R2 into windows 2008 R2 directly?

current OS: windows 2003 R2 x64 SP2
current SCOM version: SCOM 2007 R2
current database version: SQL Server 2005
it's possbile to upgraded from win2003 which installed SCOM 2007 R2 into windows 2008 R2 directly without reconfiguartion SCOM?

Hi,
And as far as I know, in-place operating system upgrade could work, but there is no document about this. Please take backup before doing upgrade.
If you want to in place upgrade the OS, we can simply move SCOM databases to new servers and rebuild management servers one at a time. the downtime for SCOM would be very minimum if the management group has the capacity for agents to report to failover
management servers while the primary MS is getting rebuilt. You do not have to perform in place upgrade on the OS to keep SCOM.
Based on your need, I would like to suggest you add a Windows 2008 R2 as additional management server for your management group. And if possible, please also upgrade your SQL 2005 to SQL 2008.
Here is a thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4713e303-76a7-4954-9494-55565757d65e/scom-server-os-and-sql-upgrade-from-2003-to-2008-r2
Regards, Yan Li
Dear Yan, Since rebuild/config SCOM Server is very complicated so it's better that I can just upgraded OS into windows 2008 R2 without do anything else.

Oracle upgrade from version 9.2 to verion 10.2 for SAP R/3 4.7 SR2

Hello,
We have R/3 4.7 SR2 system with Oracle 9.2 on 32 bit Windows platform (x86). We want to upgrade Database from Oracle 9.2 to Oracle 10.2 .
Is this possible ? If yes what is the procedure for same.
I searched but did not get any SAP document .Wpould appreciate any available documents you can share.
regards,
Pravash Raikar

Hi,
But when I goto SAP site : R/3 4.7C --> Upgrade --> Oracle ... it only provides DVD for Oracle 10.2 for 64 bit platform....
SAP suggest to migrate 32bit platform to 64 bit,
If your requirement is 10.2 32bit then you can raise an OSS with where sap will enable the archive link for customer to download 32 bit dump.
Thanks
Anil
Edited by: Anil Bhandary on Nov 5, 2009 1:30 PM

Oracle upgrade from 10.1.0.4 to 10.2.0.3

Hi,
OS:RHEL3
We are in process of moving database to other machine (same name, same config) and upgrading db from 10.1.0.4 to 10.2.0.3. We forgot to copy home.
Can we start db from 10.2.0.3 and invoke dbua for upgrade?
or do i need to install 10.1.0.4 again and startup db and invoke dbua.
I started db in upgrade mode from 10.2.0.3 binaries and tried invoking dbua. It got "table does not exists error".
If i start db normally under 10.2.0.3 home and try upgrade with dbua will this work?
Thanks,
Anil

Hi,
DBUA upgrades the old database to new database by getting information from existing old database. These informations are stored in oratab file. Moreover oracle need the old database to start while performing upgradation. Starting of old database is not possible till you have its oracle home installed. So you are required to have older version oracle home installed before you carry out installation.
The older version can be new installation or old installation copy.
Regards
Anurag

Brarchive/brbackup fails after oracle upgrade from 9206 to 10.2.0.2

I have upgraded database from 9206 to 10.2.0.2. I have upgraded brtools
to kernel release 7.00 (patch level 18). When I run brbackup/brarchive
it is failing. Brarchive command I am trying to run is:
brarchive -c -u / -r initTC8.utl.nbkp.ethp2038 -cs
I have set trace level to 15 (BR_TRACE=15) and run it. I will upload
log file with the trace (file_name=advxsuvv.cps)
I am running brarchive as ORASID user with environment:
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep oracle
HOME=/oracle/TC8
PATH=/oracle/TC8/102_64/bin:.:/oracle/TC8:/usr/sap/TC8/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/nettladm/bin:/usr/bin/X11:/usr/contrib/bin/X11:/usr/vue/bin:/opt/soeg/bin:/opt/perf/bin:/opt/upgrade/bin:/opt/hpnp/bin:/opt/lrom/bin:/usr/local/bin:/opt/openssh/bin:/opt/openssh/sbin
SHLIB_PATH=/usr/sap/TC8/SYS/exe/run:/oracle/TC8/102_64/lib
ORACLE_HOME=/oracle/TC8/102_64
ORACLE_BASE=/oracle
ORA_NLS10=/oracle/TC8/102_64/nls/data
SAPDATA_HOME=/oracle/TC
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep LIB
DIR_LIBRARY=/usr/sap/TC8/SYS/exe/run
SHLIB_PATH=/usr/sap/TC8/SYS/exe/run:/oracle/TC8/102_64/lib
[ac8558@ethp2038:/oracle/stage/102_64/client]$ env|grep NLS
ORA_NLS10=/oracle/TC8/102_64/nls/data
NLS_LANG=AMERICAN_AMERICA.WE8DEC
All other brtools actions works fine (brspace, brconnect...)
From advxsuvv.cps file find error message:
'********************************************************************************^'
'Program:               /usr/sap/TC8/SYS/exe/run/backint 5.1^'
'Input File:            /oracle/TC8/saparch/.advxsuvv.lst^'
'Profile:               /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038^'
'Function:              BACKUP^'
'Backup Type:           BACKUP_FILE^'
'********************************************************************************^'
'********************************************************************************^'
BR0248I BR_TRACE: level 4, function BrPipeClose entry with '/usr/sap/TC8/SYS/exe/run/backint -u TC8 -f backup -i /oracle
/TC8/saparch/.advxsuvv.lst -t file -p /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038 -c'
BR0248I BR_TRACE: level 5, function BrOraSigPatch entry with 'FALSE'
BR0248I BR_TRACE: level 6, function BrZombieKill entry with 'void'
BR0250I BR_TRACE: level 6, function BrZombieKill exit with 'void'
BR0249I BR_TRACE: level 5, function BrOraSigPatch exit with 0
BR0249I BR_TRACE: level 4, function BrPipeClose exit with 2
BR0280I BRARCHIVE time stamp: 2007-08-14 15.12.09
BR0279E Return code from '/usr/sap/TC8/SYS/exe/run/backint -u TC8 -f backup -i /oracle/TC8/saparch/.advxsuvv.lst -t file
-p /oracle/TC8/102_64/dbs/initTC8.utl.nbkp.ethp2038 -c': 2

here is output from command:
ethp2038:ac8558 28> file /usr/sap/TC8/SYS/exe/run/backint
/usr/sap/TC8/SYS/exe/run/backint:       PA-RISC1.1 shared executable dynamically linked dynamically linked
Once more for your reference, this is Itanium 11.23 HP UX server
ethp2038:ac8558 30> uname -a
HP-UX ethp2038 B.11.23 U ia64 3974368537 unlimited-user license
ethp2038:ac8558 31> model
ia64 hp server rx4640
BRtools version:
ethp2038:ac8558 32> brtools -V
BR0651I BRTOOLS 7.00 (18)
Patch   Date     Info
10 2006-01-05 BR*Tools fail due to SAP license problems (note 912969)
11 2006-01-11 Small functional enhancements in BR*Tools (note 914174)
13 2006-03-29 BR*Tools support for MDM databases (note 936665)
16 2006-08-11 BR*Tools start error: library libnnz10 not found (note 972136)
release note               849483
kernel release             700
patch date                 2006-09-15
patch level                18
make platform              hpia64
make mode                  OCI_102
make date                  Sep 23 2006

Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

Similar Messages

Maybe you are looking for