Oracle Upgrade interrupted inbetween, How to start the database?

Hi All,
Oracle upgrade is interrupted in between during the migration.
could you please provide me with the detail steps to start the database again with the 9i.
Thanks,
Anu.

Where is "in the middle"? Using dbua? During filesystem copy? Without specifying where it broke the only thing one can suggest is to restore everything from before the upgrade (Oracle binaries and database).
Markus

Similar Messages

How to start the database manually?

Hi,
Recently I installed Oracle10g database in my laptop. I want to change the services from autostartup to manual. So that I can start the database whenver I want.
After very first installation, I tried to do this exercise. Later I was not able to restart my database.
Can anybody give me correct steps to do this exercise?
Thanks,
Viswa

I'm surprised no-one has responded to this. Anyway, below are a bunch of shortcuts I use to start and stop my Oracle 10g. Note, I have to start the Listener AND Database for things to work. Note: you will have to check Control Panel - Services to find the Oracle.... and OracleService.... names as your's will be different.
Start Listener:
%windir%\System32\net.exe start OracleOraDb10g_home1TNSListener
Start Database:
%windir%\System32\net.exe start OracleServiceORADB10G
Stop Listener:
%windir%\System32\net.exe stop OracleOraDb10g_home1TNSListener
Stop Database:
%windir%\System32\net.exe stop OracleServiceORADB10G
Hope this helps :)

How to startup the database

Hi,
i have installed oracle database 11gr1 in oel5(32 bit).How to start the database?
Solution needed

Dear user8818950 Muvendran!
Have you created a database yet? If yes then you could do the following steps to start it:
1.) Execute the oraenv script. It should be located in the /usr/local/bin directory
. oranev
ORACLE_SID = [ORCL] ? Please fill in your Oracle SID after the questionmark.
2.) Start your listener
lsnrctl start3.) Start SQL*Plus and connect as sysdba
sqlplus sys/password as sysdba4.) Type in startup to start your database
startupAfter that everything should be fine.
Yours sincerely
Florian W.
Edited by: Florian W. on 05.11.2009 13:54
P.S. If you don't know the name of your database (ORACLE_SID) than you may look into the file /etc/oratab. E. g,
ORCL:/u01/app/oracle/product/10.2.0:NThe first column shows your ORACLE_SID. If you want to start your database everytime your sever starts than you may change the N in the last column to Y.
Best Regards

How to start a Database

I am really new in Oracle and i dont know how to start the database (i only know that the Oracle is installed...) Please Help !

From the DOS prompt, perform the following:
svrmgrl
==once you get svrmgrl> prompt then type
connect internal
startup
== once you get database started message
exit
now your database is up and running.
if you have any basic question and need good examples as well as good explanation, then, search at, http://asktom.oracle.com site.
SJH
OCP DBA

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start the oc4j server

I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
thanks for any help?

hi
Refer "Starting and Stopping OC4J" from
http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
hope this helps.
shrini

How to start the jms service?

I have installed the oracle9ias on linux 7.2. I start the EM web manager, and start other component in the component list. and I found that the 9127 port not open.
how can i start the jms service. the rmi port is already open.
thanks in advance.

Hello Xiaofeng,
The 9127 port is only used by the standalone OC4J J2EE Container (i.e. when you run OC4J outside of Oracle9iAS). When you run OC4J as part of Oracle9iAS, the JMS port is allocated by OPMN (Oracle Process Manager and Notification Server) dynamically that's why you don't see anything on 9127, if you go to the EM Web Manager, click on Server Properties of your OC4J instance, you should be able to see a configuration parameter that specifies the range of JMS port, OPMN will use a port number in the range for the JMS server. When you start Oracle9iAS (with embedded OC4J), the JMS server will start automatically.
Another thing to point out is that the JMS service in OC4J is a light-weight, memory based messaging server and it doesn't support persistence. If you want to deploy production JMS application, please use OracleJMS instead, which is based on Oracle Database Advanced Queuing, in that case, you start the JMS service by starting the database.
Regards,
Chen.

How to start the netweaver portal to publish the reports

Hi gurus,
could any one body tell me how to start the netweaver portal, I am in the SAP management console screen.
I need to publish the SAP 3.5 query reports in to netweaver portal
PLease help me

Logon the portal as system admin
Create a SAP system, connect to the BW
then create a BW 3.x query iview in the Portal Content studio.

How to reduce the database size based on MS SQL/Oracle?

Hi,
I had deleted severy clients via SCC5, but the database size is more and more bigger. Do you know how to reduce the database size.
my platform is: NT, MS SQL 2005
NT, Oracle 10.2
Best Regards,
Simon Shen

Hi Simon,
In the case of SQL you need to check how many space free you have in your datafiles and the based on that you need to Shrink them using DBCC SHRINKFILE command.
Find a couple of reference docs here,
http://www.intermedia.net/support/kb/default.asp?id=996
http://doc.ddart.net/mssql/sql70/dbcc_21.htm
Also i'm pretty sure that if your check the properties of the datafiles in MSSQL Enterprise Manager you get a "Shrink" option.
Regards
Juan
Please reward with points if helpful

How to start the IR part in XI

Hi All,
How to Start the Design part in XI while Converting the PDF file into Text file using Module Processor?
Pls let me know.......
Regards,
Govindu.

Govind,
If you want some changes to be done to the file like mapping etc then you need to have the IR setting done too.
But if you are going to use XI as an FTP service you need no configuration on the IR except creating the Datatype , message type and message Interfaces .
Take a look at this blog,
<a href="/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp">XI in the role of FTP</a>
Regards,
Bhavesh

TS1538 How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

Refer here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567

How to modify the database by Oracle-ridc-client

How to modify the database by Oracle-ridc-client

First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

How to enter the database in oracle 11g!!

Hi all,
I have installed Oracle 11g , and the SCOTT,SYS,SYSTEM account are locked ( I guess) as i am UNABLE TO ENTER THE DATABASE.
When I open SQL+ , a cmd prompt will appear requesting username ( for which I tried SYS,SYSTEM,SCOTT) upon pressing enter, it request's password ,HERE IS THE PROBLEM .What every i try to enter in the password field, doesn’t get displayed there ,I thick its not accepting anything at all.
I tried sys as sysdba as the username ,didn't work either(insufficent privilages)(windows info: OS-XP sp2, account- administrator),as I am new to SQL Kindly ,SUGGEST ME , HOW TO ENTER THE DATABASE.
Thanks & Regards
keerthi kumar

SET
sqlplus
/ as sysdba
startup
exit
THE RESULT FROM THE cmd PROMPT FOR THE ABOVE LINES....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\KEERTHI KUMAR>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\KEERTHI KUMAR\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=KEERTHIKUMAR
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFAULT_CA_NR=CA18
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\KEERTHI KUMAR
LOGONSERVER=\\KEERTHIKUMAR
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\app\KEERTHIKUMAR\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WIND
OWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Teleca Shared;C:\Prog
ram Files\Smart Projects\IsoBuster;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 15 Model 44 Stepping 2, AuthenticAMD
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=2c02
ProgramFiles=C:\Program Files
PROMPT=$P$G
P_SCHEMA=D:\Solid Edge V18\etc\UGSchemas
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\KEERTH~1\LOCALS~1\Temp
USERDOMAIN=KEERTHIKUMAR
USERNAME=KEERTHI KUMAR
USERPROFILE=C:\Documents and Settings\KEERTHI KUMAR
windir=C:\WINDOWS
C:\Documents and Settings\KEERTHI KUMAR>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 1 07:26:30 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name: startup
Enter password:

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

How to start the server. Urgent.

I mistakenly deleted the icon from the Start menu, to start the SAP IDES server in my laptop. How to start the server from any other path.
I installed it in E drive (2003 server). Database path is F drive.

Hi,
Check the following path
E:\Program Files\SAP\FrontEnd\SapGui
Here the actual Logon Pad file would be stored with name "SAPLOGON" or "SAPLGPAD".
Create another shortcut for above file on your desktop.
Best regards,
Prashant

Oracle Upgrade interrupted inbetween, How to start the database?

Similar Messages

Maybe you are looking for