Oracle Upgrade vs New Install

I have a client who wants to 'merge' 2 separate instances into a single instance in 11.5.10. The 2 separate instances are at different application and database levels, but do have commonalities, such as the COA structure. Part of the single instance project requires that the current CoA structure be changed from the current model. My impression and experience has told me this is a new install with a data migration from the 2 instances. Would that be the consensus of this group as well? Would there be any benefit to upgrading the 'newer' instance, creating a new SOB with the new structure, and then migrating data from the 'older' instance into the 'newer'/upgraded instance, which then serves as the single instance. Part of the migrations however, would BOTH require data conversion and mapping from the old COA to the new COA...

Any specefic Reasons why Multi Org can not be used here

Similar Messages

Acrobat reader X (10.01) upgrade fails, new install also fails.

Acrobat reader 9.4 upgraded itself to reader X ( 10.01 ) Fails to work.
It appeared to finish fine.
But the program will not run when I click on the desktop icon.
I uninstalled it, reinstalled it again, same result It will not run.
I then went to your ftp site downloaded it form there installed it it still does not run,
I uninstalled it, downloaded 9.4 form the ftp site, It installs and runs fine.
There is no way to send you diagnostic info to adobe as I cannot find an email adress to use.!!!!
I am using windows XP and have acrobat standard 7.1.4 also installed to generate pdf files.
Why does reader 9.4.0 work fine and reader 10.01 fails to work?
I wonder how may people have this problem?

still not fixed......
cannot upgrade to any vesion of reader 10.
error info
acrod32.exe AppVer 10.0.0.396 ModName pgphk.dll
ModVer 8.1.0.0 Offset 000010e6
I also cannot past pictures into this web page!

Oracle By Example - New Install for Each Module?

I downloaded the Data Warehouse Oracle By Example module. The instructions indicate that that Oracle must be uninstalled and reinstalled before following this module. Do you know if this is necessary? And is it necessary for each module one wants to follow?
I'd rather not uninstall my current DBs, but will if I must. Please advise.
Thank you,
Miki

Apologies.
Seems like the OAM-OVD tutorial is not present in the new OBE library. Anyways you may check the below link to configure OAM to OVD.
http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12493/vde.htm

New install will NOT load r8169 net module

After doing bad forced upgraded did new install with
10/9 iso. Install the base base-dev . rebooted to NO network.
with lsmod showed r8169 not loaded. [have openSUSE 12.2 on box using the r8169]
modprobe -va r8169 [ nothing on sysout and no load]
added file /etc/modules-load.d/r8169.conf with r8169 in file.
rebooted no load; journalctl showed this error:
system-modules-load [223] failed to lookup alias r8169 function not implemented
tried same file at /run/modules-load.d/ [ no error or no load]
Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??

Other strange on this load: at login linux 3.3, the /usr/lib/modules3.6.6 ??
There's at least a few typo in here somewhere, but I'm guessing that you're trying to imply that there's a mismatch between the running kernel and the modules on disk. You've probably fubar'd a kernel upgrade by not having /boot mounted. You should fix that. There's probably a lot of other modules that aren't being loaded.
Last edited by falconindy (2012-10-21 04:40:50)

New Install of MSCS for an Upgraded Abap System

We are currently on NW04S ECC 6.0 on WAS 700 in a MSCS, Oracle 10g. Our problem is that we are moving to new hardware and our current system uses the old MSCS (which is an upgraded system originally installed at 4.7 640 (perhaps earlier (4.6c)), which to me means that the Central Instance resides in the MSCS in the SAP Group. Our plan is to install a clustered system and do a DB restore or copy over to the new hardware. I have done the install and realize now that the ABAP MSCS install for NW04s ABAP creates the cluster a little differently in that it looks like the Java (Portal) cluster. Only the SCS and enqueue are in the MSCS and the CI and all Dis are outside of the MSCS. This creates a problem for me in that the SCS is using the 00 system number, that on our old system the CI had, so our gui is now pointing to what would be the wrong system number, as it looks like the gui must point to to the CI system number for connection to the message server. So, I guess this means a reinstall for me and switching the system numbers. I also dont know exactly how high availability would be created in this new setup unless you put an application switch in front of your CI and Dis, like you would with the Portal, to direct gui requests. With the old MSCS the cluster would know if the CI failed and move it to the other node, but since it resides outside of the cluster, you have to have some type of external director right?

Hello Jack,
even you have upgraded from 6.40 to 7.00 you will need to convert to new HA structure according the note 1011190 to avoid the problems with next upgrade. In 700 the CI and DI are not the SPOF (see also
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">here</a>) and you can configure logon groups via the message server.
In case of hardware change better to take the system copy guide and install new HA architecture - it will save you manual conversion (SAP note 1011190).
best regards

Question about installing logic 9 upgrade on new computer

Hello!
I just purchased a new mac pro (woo hoo... finally) and the logic 9 upgrade pack. I own Logic 8 but I'm not sure if I should install it before installing the logic 9 upgrade.
Will I miss out on any parts of the logic 8 sound library, loops, effects, etc by only installing logic 9? I have my S# and am aware installing Logic 8 is not needed, just curious if there are any advantages or disadvantages of installing.
Thanks

My information, serial number, is not available.
Date: Wed, 21 Nov 2012 09:53:27 -0700
From: [email protected]
To: [email protected]
Subject: Installing upgrade on new computer if prior edition is not installed
    Re: Installing upgrade on new computer if prior edition is not installed
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
You only need the serial numbers. During instal lyou will be asked for a qualifying product and then must input the serial number for LR3 as a secondary number. Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4864853#4864853
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4864853#4864853
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4864853#4864853. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Purchased Acrobat 9 some time ago, on new install asking for an upgrade password

Why is my Acrobat 9 not installing on my computer, i have enterd the password that came with the installation but i am being asked about an upgrade password, why, and i am being offerd a 30 day trile
Can anyone help?

you originally purchased an upgrade to an older acrobat version that was installed on your older computer when you installed the upgrade. when installing the upgrade on a new computer that does not have that older version installed you will be prompted for the older versions serial number.

Installing CS3 Upgrade On New Laptop That's Not Had Full Install

Frustrated!
Got a new laptop for Christmas. OS is Windows 7 Home Premium SP1
My original full is Version 5, which has been upgraded to 5.5 - 6 - 7 - CS2 & CS3.
CS3 upgrade is currently installed on my desktop machine running Window XP SP2.
I'm trying to install on my new laptop as my 2nd install, but the installation keeps failing!
With each attemt I expect to be asked to stick the original install disc (version 5) to verify but that does not happen, it never asks for it!
I have tried both Run as administatror and also in XP compatibility mode with zero results.
Am I going to need to install the full version 5 and then go through installing upgrades until I get to CS3? I'm trying to avoid all that time if possible!

Near as I can tell you haven't named one specific error message in all your posts above.
Could you be a little more specific about what's going wrong when you say:
Sapphire Studios wrote:
I'm trying to install on my new laptop as my 2nd install, but the installation keeps failing!
You've leapt to the conclusion that it's a problem with the software being an upgrade; I'd like to confirm that, that's all.
By the way, there were problems with even Photoshop CS5 working on some AMD processors up until an update was released (well after the initial release of PS CS5)... Not sure if this has anything to do with what you're doing, but if even more modern versions of Photoshop didn't get along with AMD processors there could be a compatibility issue... Did Photoshop CS3 specifically claim compatibility with the type of AMD processor you have, or is there too much of a time difference between them?
-Noel

Pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help

pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help. Am trying to work on document from office computer at home on laptop.
This is what the pop up says:
You need a newer version of Numbers to open this spreadsheet.
You can download the latest version of Numbers from the Mac App Store.
Thanks,

WS,
At first, it can be difficult to determine which version of Numbers you are using. The user interfaces are different, but if you are new to the apps you may think you are using the new version when if fact you have launched the older version. Make sure you are using Version 3.x. Then you won't get the message that you need a newer version.
Use Spotlight to launch Numbers. After typing Numbers into the search field, pick the result that says "Numbers -- Applications".
Jerry

CS3 to CS5 upgrade - can't install CS3 on new mac first

I originally purchased CS3 years ago, then upgraded to CS5. Today, I purchased a new Mac OS X 10.10 and it says I need to first install the CS3 and then go through the upgrade again. Problem is that it will not install CS3 because it is not supported on the new operating system. So what to do?

There is no need to re-install CS3.
All installers (full and upgrades) contain the full program code. The serial number tells the installer if it's a full version or an upgrade.
Just install CS5, enter the CS5 upgrade serial number then the CS3 serial number when prompted.

Unable to install IOS 4.3 Upgrade to new IPAD2/32G/3G

Hello,
I just purchased a new IPAD2/32G with 3G Verizon support. I attempted to upgrade my new IPAD2 with the new IOS 4.3 upgrade when prompted by ITUNES.
I received a message when it the process was done that the upgrade failed. My wireless is working correctly. What can I do to install the upgrade?
Thanks,
RobertSfromNaperville

Windows? Turn off virus-protection? Check this out: Update and restore alert messages on iPhone, iPad, and iPod touch.

Installing upgrade on new computer if prior edition is not installed

I'm trying to install Lightroom 4 upgrade on my new desktop, which does not have Lightroom 3 installed. My copy of LR 3 is 800 miles away and I will not see the box until next May.
Please advise.

My information, serial number, is not available.
Date: Wed, 21 Nov 2012 09:53:27 -0700
From: [email protected]
To: [email protected]
Subject: Installing upgrade on new computer if prior edition is not installed
    Re: Installing upgrade on new computer if prior edition is not installed
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
You only need the serial numbers. During instal lyou will be asked for a qualifying product and then must input the serial number for LR3 as a secondary number. Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4864853#4864853
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4864853#4864853
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4864853#4864853. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I set security on Leopard to prompt admin password before any changes - eg new instal , updates etc. Used to have this before recent upgrade to leopard

How do I set security on Leopard to prompt admin password before any changes - eg new instal , updates etc.
Used to have this before recent upgrade to Leopard and keen to keep this function

Run from a standard account and not an admin one.

IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

iPod not recognized in 'My Computer' and in iTunes for Windows

New Install: dbca problem on ubuntu 10.04

Hello List,
I want to install Oracle 11gR2 on my Ubuntu box which is running 10.04 Lucid:
oracle@z2:~/oh$ cat /etc/issue
Ubuntu 10.04.1 LTS
oracle@z2:~/oh$ uname -a
Linux z2 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 i686 GNU/Linux
The above command suggests to me that I am running 32bit Linux.
I downloaded the 32bit Oracle cdroms.
I read this link:
- http://www.pythian.com/news/13291/installing-oracle-11gr2-enterprise-edition-on-ubuntu-10-04-lucid-lynx/
I carefully followed the instructions there.
The instructions there are for 64 bit Linux. Like I said, my box is 32bit.
Here are the results of my libstdc++5 shoehorn-install:
oracle@z2:/usr/lib$ ll libstd*
lrwxrwxrwx 1 root root 18 2010-08-10 21:59 libstdc++.so.5 -> libstdc++.so.5.0.7
-rw-r--r-- 1 root root 737192 2010-08-10 21:58 libstdc++.so.5.0.7
lrwxrwxrwx 1 root root 19 2010-08-09 13:54 libstdc++.so.6 -> libstdc++.so.6.0.13
-rw-r--r-- 1 root root 975088 2010-03-26 15:43 libstdc++.so.6.0.13
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.5.0.7
libstdc++.so.5.0.7: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.6.0.13
libstdc++.so.6.0.13: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
The instructions suggest that I install some debian packages.
Here are my results for that task:
root@z2:/oracle/downloads/database# apt-get install unzip build-essential x11-utils rpm ksh lsb-rpm libaio1
Reading package lists... Done
Building dependency tree
Reading state information... Done
unzip is already the newest version.
build-essential is already the newest version.
x11-utils is already the newest version.
rpm is already the newest version.
ksh is already the newest version.
lsb-rpm is already the newest version.
libaio1 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
The instructions described a software-only install so I did that.
I bumped into no problems.
After the install,
I added env vars to my .bashrc and got a new bash:
export ORACLE_BASE=/oracle/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=orcl
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export PATH=$ORACLE_HOME/bin:$PATH
Then:
oracle@z2:~$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Sat Aug 14 18:03:00 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> exit
oracle@z2:~$ ln -s $ORACLE_HOME oh
oracle@z2:~$ ln -s $ORACLE_HOME 11gr2oh
oracle@z2:~$ cd oh
oracle@z2:~/oh$ OPatch/opatch lsinventory
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /oracle/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /oracle/app/oracle/product/11.2.0/dbhome_1/oui
Log file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2010-08-14_18-06-29PM.log
Patch history file: /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/lsinv/lsinventory2010-08-14_18-06-29PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
oracle@z2:~/oh$
So far so good.
oracle@z2:~/oh$
oracle@z2:~/oh$ which dbca
/oracle/app/oracle/product/11.2.0/dbhome_1/bin/dbca
Then I tried dbca and it bombed:
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb78476f3, pid=5883, tid=3077301952
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5883.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ env|sort
DISPLAY=localhost:10.0
HOME=/oracle
JAVA_HOME=/java/jdk16
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
ORACLE_BASE=/oracle/app/oracle
ORACLE_HOME=/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/bin:/java/jdk16/bin:/pt/jruby151/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/dan/bin:/pt/bin:.
SHELL=/bin/bash
TERM=dumb
USER=oracle
_=/usr/bin/env
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ unset JAVA_HOME
oracle@z2:~/oh$
oracle@z2:~/oh$ export LD_LIBRARY_PATH=${ORACLE_HOME}/lib
oracle@z2:~/oh$
oracle@z2:~/oh$ export PATH=${ORACLE_HOME}/bin:/usr/bin:/bin:/usr/sbin:/sbin
oracle@z2:~/oh$
oracle@z2:~/oh$ which java
/usr/bin/java
oracle@z2:~/oh$
oracle@z2:~/oh$ java -version
java version "1.6.0_18"
OpenJDK Runtime Environment (IcedTea6 1.8) (6b18-1.8-4ubuntu3)
OpenJDK Server VM (build 16.0-b13, mixed mode)
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ su
Password:
root@z2:/oracle/oh# mv /usr/bin/java /usr/bin/java16
root@z2:/oracle/oh#
root@z2:/oracle/oh# exit
oracle@z2:~/oh$ which java
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5953.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
I used these google keywords to search for clues:
google:
oracle ubuntu 10.04 dbca SIGSEGV ld-linux.so.2
I found no clues in Google.
So, I look for clues here.
Does anyone have any ideas on how do debug this error from dbca:
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
??

I am running V11.2 on 64-bit Ubuntu
Below are some log files on my system.
You may be able to find similar ones on yours & they might contain additional clues.
/u01/app/oracle/product/11.2.0/dbhome_1/assistants/dbca/logs
/u01/app/oracle/cfgtoollogs/dbca
/u01/app/oracle/cfgtoollogs/dbca/v112
/u01/app/oracle/cfgtoollogs/dbca/v112/mkplug_v3_v112.log
/u01/app/oracle/cfgtoollogs/dbca/v112/tts_example_imp.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/rmanRestoreDatafiles.sql
/u01/app/oracle/cfgtoollogs/dbca/v112/trace.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postScripts.log
/u01/app/oracle/cfgtoollogs/dbca/v112/OraDb11g_home1_v112_creation_checkpoint.xml
/u01/app/oracle/cfgtoollogs/dbca/v112/cloneDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/CloneRmanRestore.log
/u01/app/oracle/cfgtoollogs/dbca/v112/lockAccount.log
/u01/app/oracle/cfgtoollogs/dbca/v112/emConfig.log
/u01/app/oracle/cfgtoollogs/dbca/trace.log_OraDb11g_home1
bcm@bcm-laptop:~$ uname -a
Linux bcm-laptop 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

Oracle Upgrade vs New Install

Similar Messages

Maybe you are looking for