Oracle version 10.2.0.1 odbc drivers

hi, im using oracle 10.2.0.1 in windows 7 64bit machine,,,im not able to find its drivers in odbcad32.exe.....i just formatted my system but previously i somehow managed to find some drivers and use it to connect it with my jsp project...,,,im desperately looking for a solution...any solution other than upgrading to 11g will be highly appreciated...thanx in advance,,,

NOT an Oracle issue, on Windows 64bit there are 2 odbcad32.exe, make sure you use the right one:
http://support.microsoft.com/kb/942976
Werner
I guess you invoke the version located under \windows\system32, because that's the default. Try the other location mentioned in the document.
Edited by: oradba on 23.02.2011 15:37

Similar Messages

Oracle 9i ODBC Drivers on Windows 7 Enterprise 32 bit

Hi,
Can any one help me with the information, If the Oracle 9i ODBC drivers supported on Windows 7 Enterprise 32 bit, Access 2007 as the front end and Oracle 9i database as the backend.
If the 9i drivers are not supported on Windows 7 Enterprise 32 bit which version is the supported version.
Thanks
Srini

There is no driver for windows 7 (32-bit) to connect Oracle 9i (9.1) for .Net.
.NET libraries for Oracle and OLE DB providers for Oracle both are available for higher version
Oracle.dataaccess.client http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html
but check this below link
http://www.oracle.com/technetwork/database/windows/downloads/index.html

How to install ODBC Drivers in Oracle

Hello All,
I want to install ODBC Drivers (from Oracle vender, Not from the DataDirect ).
I have downloaded the ODBC Drivers for Sparc( from official Oracle website) but while installation it is asking for DriverManagers Installtion..
Where Can I get this Driver Manager........
Please help me how to install ODBC Drivers on Unix platforms....
Sridhar.

Please help me how to install ODBC Drivers on Unix platforms....You should be able to install them as a component of your client (or server) installation. Just use the Oracle Installer to add them.
~Jer

How do I install just the Oracle ODBC drivers on a Windows NT workstation?

I want to access a remote Oracle database on my network via ODBC
from Visual Foxpro. When I try to set up the ODBC data source,
I'm told it doesn't exist. I downloaded the ODBC driver
(ora8175.exe) from Oracle, but I cannot get it to run.
I am new to Oracle, so any assistance you can provide will be
greatly appreciated. (I am very familiar with VFP).
Thanks,
Jeff

You have to install the Oracle client in order to be able to use
the Oracle ODBC driver. The ODBC driver relies on, among other
things, the network communication libraries of the Oracle client.
If you're willing to pay for an ODBC driver, Merant (now
DataDirect I believe) has an ODBC driver that doesn't require
the Oracle client to be present. I've not used it, so I can't
recommend it, but it's an option.
Justin

Problem with Installing 8.0.5 ODBC Drivers

I have been having a problem getting the ODBC for the 8.0.5 client. The installation runs fine, I use Net8 Easy Config and setup and running. I setup the datasources and sucessfully "Test" the connection with the login and password. When I go to the MS ODBC control panel, I see the Oracle ODBC, select it and then nothing happens. It just stops setting up the ODBC and MS Access cannot access the server.
Any suggestions

The version is the 8.0.5.10.0 ODBC drivers. I am assisting another user in this process and I do ot have the version info.
What I did was install the 8.0.5.0.0 originally and used the Oracle installer to install the 8.0.5.10.0 ODBC and stepped the user thru the same on his end. After installing the Net8 utility test fine, it's the control panel aplet that fails.

Installing ODBC Drivers on a Server with multiple users.

We are trying to install ODBC drivers on our web server and want to know what is the minimum we can install and be able to add a DSN through the MS ODBC Administrator. This is a server that is used by multiple companies and we do not want to do something that will affect them.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
The oracle installation does not warn you when it overwrites existing files, which is why we cannot simply install everything. For example, on my test machine it trashed the Java installation without asking or telling me. I discovered it this morning when I tried to go to a site that uses Java. That was a low risk on the SQL server, because we did not have Java installed. Other elements, though, cannot be risked in that fashion. We have to find out what files are required in order to solve the problem.
Version 9i on a Windows 2003 Server.

1) I’m not certain about the overwrite vs separate machine. What happened is that it installed its own Java, which was much older than the Java previously installed. Following the oracle installation, internet explorer was no longer able to find Java at all, prompting for a new Java installation. During the installation, no mention was made of the changes that were being made.
2) Each company has its own account on our server, its own instance of the database, etc. nowhere in the oracle release notes or the installer could I find anything that provided for a user-limited installation: it was global. Even though the oracle installation suggested, and I accepted, unique folders for its installation targets, the problems mentioned occurred. The web server it wants to install is not possible to be user-limited: it wanted to take over http for the machine.

Two oracle versions on one client

Hello
I installed Oracle7 and Oracle8 Client together on the same machine.
So far it works well. But when I want to open one of my ODBC Drivers, I4m getting the following error:
ODBCADM caused a general protection fault in KRNL386.exe at 0001:243F.
Is it possible, that this is because of the two Oracle versions?
Or does anybody have another idea?
Thanks, Anja

Hi,
Like Kamal said, no problem. You can have 2 tnsnames.ora, one in 8i (where you declare 8i databases), and one in 10g (where you declare 10g databases).
To connect to 8i, set ORACLE_HOME to 8i directory and use 8i sqlplus.
To connect to 10g, set ORACLE_HOME to 10g directory and use 10g sqlplus.
Nicolas.

Multiple ODBC drivers in W2K

Is there any known problems with having 2 different version of the Oracle ODBC driver installed on one Windows 2000 client? I have the 8.1.7 driver and the 9.2.54 driver installed. When I attempted to set up an ODBC data source for the 8.1.7 driver, I get the following message from "SQORAS32: An unsupported operation was attempted".
How can I figure out what the problem is?

Yes. Perhaps the installs were not performed correctly and need to be re-installed. Is there anything in the registry that I can use to verify? I've been told that it's not possible to have two Oracle ODBC drivers installed at the same time. Is it possible? The older driver is 8.1.7.2. Thanks

Chained ODBC drivers

Hi!
I have a rather special ODBC setup that works fine up until a certain point. My Access 2000 front-end connects to an Oracle database via Oracle ODBC version 8.01.73.
The Access front-end contains a set of sophisticated queries that are used by Interleaf through a Microsoft Access ODBC driver.
In other words, Interleaf produces reports by opening an ODBC connection to the Access front-end, which then collects the data with an ODBC connection to the Oracle database.
This works find exept when the Access ODBC driver requests a comparison on numerical data. The error returned is "DIAG [22005] [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. (-3030)".
I am currently working around it by comparing textual data instead but it creates some unwanted results in my queries. Can anyone hint me for a solution?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by paul:
hello,
are there any odbc-drivers available for oracle (8) on a linux machine?<HR></BLOCKQUOTE>
unixodbc.org
easysoft.org

Installing two Oracle Version in One Windows[/b]

Hi Guys
I want to know how to install two different versions of Oracle in One Windows Under Different Homes.

A guess is that this is due to the earlier 8.1.7.x ODBC drivers did not support multiple homes (max one ODBC version per PC - ugh!).
If you can't skip this error, try to uninstall 9i ODBC, install 8i, upgrade 8i driver and then reinstall 9i ODBC (in the right home)... I guess a better way would be to do this in the correct order on a clean PC (to avoid registry messup as much as possible).

Cannot download ODBC drivers

I am attempting to download ODBC drivers for use with Oracle 10g via the following location.
http://www.oracle.com/technology/software/tech/windows/odbc/htdocs/utilsoft.html
No matter which version I attempt to download (10.1.0.5.0, 10.1.0.4.0, 10.1.0.3.1) I receive a connection timeout. Any thoughts as to why?

I just downloaded all of them. Are you having problems with your internet connection or maybe your proxy?

ODBC Drivers on 8.1.6 database

Does anybody know if Oracle ODBC Drivers other than 8.1.6 will work with an 8.1.6 database?

Any driver should work with an 8.1.6 database. You'll want the driver that corresponds to the version of your Oracle client (i.e. 8.1.5.6 on an 8.1.5.x.x client, 8.0.5.9 on an 8.0.5.x.x client).
Justin Cave
ODBC Development

Need SQR ODBC Drivers / Download +Installer

Can someone help me? We are using an old version of SQR (6.1.3 Bld 90), from the days just after Brio bought it. We are having trouble with our ODBC drivers, as we migrate the developers' PCs to WinXP / Win2k. All was fine in NT. Reinstalling from the disk is possible, but the ODBC install overwrites stuff (doesn't give option to just install the drivers) ... the Oracle drivers work fine, once a report is compiled, but ... we can't compile because the registry referents are out of whack, and we discovered this too late to save a version that WAS working. So ... we need either (a) drivers and a way to install them or (b) a way to unpack them from the data.z file on the install disk ... or some other answer. We cannot upgrade for a whole variety of reasons at the present time (maybe later in the year, but not now). PLEASE PLEASE SOMEONE HELP!!! My real e-mail is [email protected] or [email protected] Thanks for all clues and support!!!Suzanne Michelle, NYC Transit

hi,
Thanks for getting back to me.
I currently have Developer 2000, R2.1, but i want to be able to install the ODBC drivers on other machines that do not have any other Oracle software installed.
Surely there's any easier way to do this. Am i missing something? What is the pathway to install Oracle ODBC drivers on machines that have no other oracle software installed?
Thanks
B

Procedure runs from 9i odbc drivers but not from 10g.

Hi
i have a old vc++ application which calls a stored procedure.
This application has been in use for a long time.
earlier the Database server and client were both oracle 9i.
now we moved the server and some of the clients to 10g.
The application still works from machine with 9i clients (with older odbc drivers)
but from machines with 10g client (with newer odbc drivers) i get the following error.
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
( ) - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
table avg count current exists max min prior sql stddev sum
i also get:
[Oracle][ODBC][Ora]ORA-06550: line 1, column 16
The procedure has three parameters which it recieves as type NUMBER:
CREATE OR REPLACE PROCEDURE "TEST"."MYPROCNAME"
(prm1 NUMBER, prm2 NUMBER, prm3 NUMBER)
AS
/*...body of the procedure...*/
The process flow in application code (vc++) goes something like this:
SQLBindParameter(handelToSTMT,1, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm1, 0, NULL);
SQLBindParameter(handelToSTMT,2, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm2, 0, NULL);
SQLBindParameter(handelToSTMT,3, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm3, 0, NULL);
SQLPrepare(handelToSTMT,"{call myProcName(?, ?, ?)}",SQL_NTS);
SQLExecute(handelToSTMT);
Is ther some change in how 10g odbc parameter bindings work?
Can it be possible to change the procedure to compensate for that?
(somehow i can't get the formatiing right, even after multiple edits)

This is your post should look like -
Hi i have a old vc++ application which calls a stored procedure. This application has been in use for a long time. earlier the Database server and client were both oracle 9i. now we moved the server and some of the clients to 10g. The application still works from machine with 9i clients (with older odbc drivers) but from machines with 10g client (with newer odbc drivers) i get the following error. PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following: ( ) - + case mod new not null others <an identifier> table avg count current exists max min prior sql stddev sum i also get: [Oracle][ODBC][Ora]ORA-06550: line 1, column 16 The procedure has three parameters which it recieves as type NUMBER:
CREATE OR REPLACE PROCEDURE "TEST"."MYPROCNAME" (prm1 NUMBER, prm2 NUMBER, prm3 NUMBER)
AS /*...body of the procedure...*/ The process flow in application code (vc++) goes something like this:
SQLBindParameter(handelToSTMT,1, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm1, 0, NULL);
SQLBindParameter(handelToSTMT,2, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm2, 0, NULL);
SQLBindParameter(handelToSTMT,3, SQL_PARAM_INPUT, SQL_C_SSHORT, SQL_INTEGER, sizeof(parm1), 0, &parm3, 0, NULL);
SQLPrepare(handelToSTMT,"{call myProcName(?, ?, ?)}",SQL_NTS);
SQLExecute(handelToSTMT);Is ther some change in how 10g odbc parameter bindings work? Can it be possible to change the procedure to compensate for that?
-hope this will help all the user to go through your script.
Regards.
Satyaki De.

Transfer data from two oracle version to one sql server 2005

Hi,
I have two database servers on different machines. They are
1) Oracle 8.1.7.4
2) Oracle 7.3.1.4
I have to create agents which can transfer tables from these two databases to one machine having sql server 2005 database.
Please tell me what are the options. What drivers i need to install on machine having sql server 2005 so that i can transfer data from both oracle versions.
Thanks
Rajneesh.

Your Oracle databases are so old you might want to look around and see if you can find dinosaur bones near by.
Given the differences in data types between Oracle and SQL Server I'd suggest you start off by dumping the data into delimited ASCII files and then loading it using whichever SQL Server tool you wish.

Oracle version 10.2.0.1 odbc drivers

Similar Messages

Maybe you are looking for