Oracle Version for Advanced Replication

Hi all,
When, Advanced Replication first appeared in Oracle Database?
Was it in version: 7, 8i or 9i?????
I' d like to do the same question for materialized view.
I know that in previous releases materialized view was snapshot. So, in wich version of Oracle snapshot was introduced?
I hope somebody help me...

Do not use none of them. Conflict resolution will kill you. This is only will works if one side working on one set of tables while other working on other sets of tables. If you do not want to have such hadace use active standby database (11g) to run reports locally, but all changes must happen on primary side.

Similar Messages

Trying to find the correct Oracle version for SCO Unix 5.06

Please I will appreciate you can help me indicating where can I download the correct Oracle version for SCO Unix 5.06. I have downloaded the Tru64 Compaq version but it is not working with SCO.
Best regards
Armando Delgado
00511 8105860
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg

This is pretty old. From the certify matrix, you can see the last available versions this platform supported were 9.0.1 and 8.1.7, just for the Intel SCO Open UNIX 8 with LKP. SCO 5.0 last time I used it was with an Oracle7.3 release. In case you don't have software it'll be hard to find, unless you address this to your Oracle Representative.
Are you absolutely required to run on this version? Otherwise, you could try new software and new oracle releases, unless you want to run unsupported.
~ Madrid.

Oracle version for AIX 5.3 ?

I just download the latest Oracle 10g Trial version for AIX 5L from the Web. But as I go through installation, while running "runInstaller", it gave me message:
"Checking operating system version: must be 5200
Failed <<<<"
Of course since I have AIX 5.3. The requirement of Oracle 10g says the OS should be "AIX 5L version 5.2, Main level 1 or higher". With AIX 5.3, is there a Oracle version?
thanks,

Thank you, it worked!
However it seems to me a more workaround. Is there a source to say Oracle 10g for AIX 5.3 is officially supported (or aka certified for the platform)? If a Oracle 10g is purchased and problem develops on AIX 5.3, I don't want to get a saying it is not yet certified.
Thanks,

Which Oracle version for analytic sql?

Can anyone tell me from which Oracle version on there exists the "analytic sql"?
Thanks!

Hi,
Mark1970 wrote:
Can anyone tell me from which Oracle version on there exists the "analytic sql"?
Thanks!Analytic functions (that is, functions using the OVER keyword, such as
RANK () OVER (ORDER BY hiredate)) were introduced in Oracle 8.1
(It's no coincidence that in-line views were introduced around the same time, since so many uses of anaytic functions require sub-queries.
In-line views were first documented in Oracle 8.1, but they worked in Oracle 8.0.)

What Oracle version for XML Parser for java

Is the XML Parser for Java only available for use with
Oracle 8i? Is it possible to use with Oracle 8.05
null

The XML Parser for Java can be used with any of the supported
version JavaVMs. The only difference with 8i is that you can
load it into the database and use JServer which is an internal
VM. For 8.0.5 you simple run it externally and connect through
JDBC.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
Eddie SHipman (guest) wrote:
: Is the XML Parser for Java only available for use with
: Oracle 8i? Is it possible to use with Oracle 8.05
null

Oracle Version for Windows 7 ??

Hi,
I had 10g on Vista 64bit prior but now since I have switched to Windows 7,sadly 10g doesn't work for me anymore :( I searched around and found that Oracle 10g supports Windows NT kernel version 4.0,5.0,5.1 means Xp and Vista and designed for that and windows 7 based on NT 6.1 so no support for it by 10g.
So I wanted to know which version should I use of Oracle 11g?? I will be giving my certification exam soon so wanted to practice,so kindly help me out :)

11.2 will be the first version of Oracle to be certified on Windows 7. 11.2 for Windows, last I checked, is scheduled to be released some time in Q1 of 2010.
I have installed 11.1 on Windows 7 laptops that seem to be working. It's not certified, and there may well be issues with certain components, but I haven't personally encountered any issues.
Justin

Oracle version for vista basic??

hi everybody, i have started my preparation for oracle certification exam. i have tried to install oracle10 in my laptop which has vista home basic, but could not succeed.can someone tell me which version of oracle is compatible with vista home basic?? thanks.

can someone tell me which version of oracle is compatible with vista home basic??None. See Oracle Cerification Matrices. Oracle products are certified on Business, Enterprise and Ultimate Editions.

Recommended Oracle version for SAP 4.7 and for BW 3.5

Hi,
where I can find the SAP's recommended version of Oracle for SAP ERP 4.7 and BW 3.5?
Thanks
Message was edited by:
giovanni maria maccioni

Hi,
Recommended would be 10.2.0.2
Oracle has ended the customer care support for 9.2 in July 2007:
Note 925871 - Discontinuation of 'Customer Care Support' for Oracle 9.2
At the same time, SAP customers have a "free" year of Extended Support for Version 9.2.
9.2.0.8 is the latest patch set provided for 9.2. (see note 1021844)
I think that, if you are planning to perform a new installation, it would be better to do it in 10.2

Knowing About Oracle Version For WindowsXP.

So that we may better diagnose problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
I am having problem installing Oracle8i personal for Windows98 on WindowsXP Home Edition.So I want to know that which personal edition of Oracle(8i/9i) will work properly on WindowsXP?
I have also tried the Program Compatibility Wizard But it did not worked.
Browse--IE6
OS-WindowsXP Home Edition
Error Msg- When I try to Install Personal Oracle8i I get the error message as "This version of Oracle does not have top level NT components".
I want the solution as earlier as possible because as I am a student I Need Oracle as earlier as possible.
I am not Connected to any network.
Please Email Me the solution at [email protected]
Thank You.

Hi Tal
Install what you have currently in hand and then apply the patches.patches will keep on comming when ever an enhancement/ bug is fixed.
Thankyou
[email protected]

Oracle Versions for Apex

Anyone knows what versions of Oracle can
Apex run?
Is it 9i and up?
Thanks

Never mind I just love asking silly questions
on a Friday afternoon

For DR Solution Streaming or Advanced Replication

To have recovery in events of system crash or WAN down, Oracle streaming or Advanced Replication is an effective solution for outrage?

Hi, I just want to know what do you want to achieve..do you want a disaster solution?
Oracle has extended RAC and Data Guard for disaster recovery for site failure..streams and replication can answer that for you but replication and streams requires excellent bandwidth espcially if your looking at offsite replication.
roy

Upgrading to Oracle 10g for R/3 4.5B

Hello All,
One of the businesses we support is running SAP R/3 4.5B on Oracle 9.2.0.6. The kernel details are:
SAP R/3 Kernel information:
SAP R/3 Kernel          45B
Database version        OCI_80500_SHARED
created in                  SunOS 5.5.1 Generic_103640-19 sun4u
Patch level                 972
Is there a path to upgrade the database to 10g with this R/3 release without SAP upgrade?
All information will be useful.
Many Thanks,
Nisch

Nisch,
also, please note the excerpt below taken from note 819655 (please check it for an updated version):
Oracle Version
For general information regarding the support of Oracle version 10.2, see Note 720886 .
Even though Oracle 10 will not be generally certified for SAP systems with Releases 3.1I up to 4.6B, it is fully supported to upgrade these systems to Oracle 10.2 prior to the SAP upgrade or prior to the PREPARE phase of the upgrade.
The system can run with this setup for weeks with full support. This procedure was tested in the SAP-internal upgrade validation phase. However, you will encounter limitations in the field of database monitors and you cannot copy such a system to a target system running on Oracle 10g. From a business application perspective, you can use the system without any limitations.
Double Stack systems: When you upgrade the SAP J2EE Engine from NW ´04 to NW2004s, you must apply at least Support Package 12 of the SAP J2EE Engine before the upgrade to Oracle 10.
Also, note 868681 confirms the above, i.e..:
"SAP Systems 31I - 45B
The transports included within this note are not relevant for SAP releases 31I - 45B. These systems (31I - 45B) have to be upgraded to Oracle 10.x during preparations for the SAP Upgrade (release 700).
The monitoring transactions such as DB02 may not work correctly in these systems after upgrade to Oracle 10.x. However there is NO IMPACT on any of the business transactions."
Meaning, that if you upgrade your 4.5b system to Oracle 10g outside of a SAP upgrade project, you may find yourself running an unsupported installation.
Regards,
JC

PDF Printing APEX 3.2.1 (APACHE FOP) which OC4J version for Oracle 11g?

I am using APEX 3.2.1 on Oracle 11.g (under windows XP)
I want to test PDF printing (in advanced turorial) with standard config ( APACHE FOP no Oracle BI publisher).
When I look oracle doc : http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html)
prerequisites for installing WAR file (Installing and Configuring Apache FOP) imply downlad for Oracle Containers for J2EE (10.1.3.2) ,
once there : http://www.oracle.com/technology/software/products/ias/htdocs/utilsoft.html)
the accessed page seems restricted to Oracle Application Server 10g Software Downloads.
My question : is the last Version (10.1.3.5.0 : Oracle Containers for J2EE 10g (OC4J) (build #090727, 91 MB) - J2EE 1.4 compatible with EJB 3.0 / JPA 1.0 support ) also VALID for Oracle 11g ?

I just installed a similar setup with the following software combination and it works.
win32_11gR1_database.zip
oc4j_extended_101350.zip
jdk-1_5_0_22-windows-i586-p.exe

Advanced Replication between Oracle XE and 64-bit Oracle Enterprise

hi all,
Currently i have advanced replication working between Oracle-XE and our 32-bit based Oracle 10gR2 Enterprise Server. Will advanced replication work if we moved our Enterprise 10gR2 instance from a 32-bit to a 64-bit?
May be some of you might already be doing this, i just want a confirmation before i give the go ahead.
thanks a lot,
GG

Hi;
Please see:
Error: "Could not load file or assembly 'Oracle.DataAccess, Version=%s, Culture=neutral, PublicKeyToken=%s' or one of its dependencies. An attempt was made to load a program with an incorrect format" [ID 1367695.1]
Regard
Helios

Advance Replication and Oracle Label Security

Has anyone been able to configure both Advance Replication and Oracle Label Security to work together?

This is currently not supported in Streams. I have an enhancement request in with Oracle for this functionality. This won't be seen in 11g R2 either.
Has anyone done Label Security with Advance Replication?

Oracle Version for Advanced Replication

Similar Messages

Maybe you are looking for