Oracle virtual box
hi all
i have been install ubuntu on my oracle virtual machine but i cant view the OS as a full screen
so please help me to do that because its appear in a small screen in the middle of main monitor
thanks
hi
thanks for ur support
i have been solved the problem
for help to any one u must do below
open the terminal and type the commands below
sudo -i (and press enter)
then it will ask u for password of ur OS
then type
cd /media/cdrom0
sudo sh ./vboxaddition_3.2.8_6445
then u have to wait while unpack complete successfully then eject the cd rom then restart the system
thanks for all
Similar Messages
-
Using Oracle RAC VM tmeplates - Oracle Virtual Box
Greetings - can any one guide me to use Oracle RAC vm templates using Oracle Virtual Box?
Appreciated!There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
Note: This is not a Virtualbox forum. -
Installing Server 2008 using Oracle Virtual Box
Hey there does anyone know how to install server 2008 as a virtual machine using Oracle Virtual Box?
Hi,
Due to Virtual Box is not related to Microsoft product, I suggest you try to look Virtual Box for
help.
By the way, I find some articles
how to install windows server2008 on Virtual Box
http://www.brighthub.com/computing/windows-platform/articles/31355.aspx
http://www.youtube.com/watch?v=r0tKw1k2rFs
Important
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Is Oracle Virtual box VM for AIA11g products available?
HI All
Is Oracle Virtual box VM for AIA11g products available?
Regards
ArunThanks for your reply, Lajos.
Is it available by post then? One of our customers is apparently using it & we need to copy their environment.
Nick -
Hi ,
I have installed Oracle Virtual box on windows server 2008 r2 hosted on 1und1.de.
Till installtion and setting up untun on virtualbox it was fine, but once i changed the adapater to bridged mode. I immediatly lost connectivity with my server and now cant access.
It is now 2 days i cant access my server and neither ping it, also the website hosted on it is also down.
The 1und1 has following 2 options
1) using putty i can connect to server command prompt using administrator but cant run any gui application
2) Server Rescue mode: where i get special environment to start, stop services, access registry and command prompt.
Till now i have tried lot of setting to enable network connectivity but not able to success
This is the result of Ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : s15453760
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-04-FD
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5d5c:5bbc:c61:e9b1%16(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.233.177(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 352845863
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B9-51-EA-00-19-99-A5-E7-BE
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{BBF9AA14-45EA-460C-8F23-E106D890D878}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
How can i restore my connection.
ThanksHi,
According to the result of "ipconfig /all", the physical adapter dosen't appear.
Please check if the physical network adapter works properly. We can verify this in Device Manager.
To open Device Manager by using the Windows interface
Click Start, and then click Control Panel.
Click Hardware and Sound.
Click Device Manager.
If the network adapter is working properly, please make sure that the Internet Protocol Version 4(TCP/IPv4) has been checked in the properties of the physical network adapter.
If issue persists, please try to uninstall the Oracle Virtual box.
Best Regards.
Steven Lee
TechNet Community Support -
Importing Oracle Virtual Box VM into OVS 2.2
Hi All,
1] We bought a New Dell PowerEdge Server. we installed the OVS 2.2 onto the same.
2] Now I have couple of VM that are riunning inside VirtualBox S/w. I created these m/c for POC's.
3] I want to move these machines to OVS 2.2 server so that it will be run by OVS and managed by OVM.
There is no clear documentation regarding the same. There is no vm.cfg file for the Virtual Box.
For a Std VirtualBox machine; we have .ovf and couple of .vmdk files. I have multiple .vmdk file for my single VM.
Can you point me to docs/procedure on how to migrate these machines from VirtualBox env(which is 2008 server running virtualBox Client) to OVS server 2.2??
Regards
SushilI executed the V2V process for converting the VMWare Images to OVM but mine are Oracle VirtualBox Images
To import VMware VMDK images using Oracle VM Manager, follow the same process you would to import any other virtual machine image resource, generally
from an external source (HTTP or FTP location), using the Import wizard. Or you can copy the VMDK image files manually into /OVS/running_pool directory.
Oracle VM will automatically detect that the image is in the VMDK format and convert the image file to an Oracle VM format and deploy it to the specified
Server Pool.
The OVS is detecting the directory containing the files for my VM. After importing the manager UI is failing with "OVM-5004 Invalid virtual machine config file." error
Sushil
Edited by: Sushil Deshpande on Jul 25, 2011 7:15 AM -
Oracle Virtual Box SOA/BPM
Hi All,
Excuse me if i am on wrong category.
I am trying to install Oracle SOA Suite/BPM Suite VirtualBox Appliance and download all the part of zip files
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.001
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.002
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.003
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.004
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.005
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.006
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.007
When i check with MD5sum for the above file, not one file is matched with the given hash code series.
Even i joined all the files which resulted in oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z and when i tried to extract it to get *.OVA* , i am ending with an error cannot open archive file ! I:\SOA VM Box\SOA\oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z: Cannot open I:\SOA VM Box\SOA\oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z
I doubt the archive is corrupted. But i dont see any specific error of it.
I download same files 4 time, but all are ended with same error.
I refereed this document + http://www.oracle.com/technetwork/middleware/soasuite/learnmore/soabpmvirtualboxreadme-1612068.pdf+.
Can some one please help me if any one have solution.
Regards,
Tarak.Hi Taark,
If the MD5sum is not matching it's probably because is corrupted... Are you behind a proxy server when downloading the files, it's possible that the proxy server has some anti-virus and it's removing something from the file...
May you can ask the security guys in your company to try and download the files for you from a dmz location avoiding the proxy and see if something changes...
Cheers,
VLAD -
Oracle Virtual Box 4.08
Hello, Im a student using VB for a class project. My computer operating system is Vista. In the VB I'm running Windows Server 2003 Enterprise R2, The question is why windows server is not seeing my USB device? I try to mount it with the USB Icon on VB and it is listed there, so click it and still it will not show in windows server in VB. Can anyone help me with this issue. Thank You
Did you install the VirtualBox 4.0.8 Oracle VM VirtualBox Extension Pack?
http://download.virtualbox.org/virtualbox/4.0.8/Oracle_VM_VirtualBox_Extension_Pack-4.0.8-71778.vbox-extpack -
Starting VM box manager for the first time requires to choose
'Installation Media' and the choice by default is D drive.
What CD I am suppose to use in the D drive?
Is the the guest operating system cd?
If my host OS is same as guest OS, then shall I insert my host OS cd?
Please help me understand this step. What actually goes on behind the scene when I start the VM machine for the first time after assigning RAM and Disk size.
Thank you
jCould you try installing dkms first before running vboxdrv setup
-
Install MAC OS X 10.63 on a PC using Oracle Virtual Box
Hi I have a Sony VAIO PC I have tried to install MAC OS X 10.63 Snow Leopard using Oracle Virtualbox but it failed to boot from disc. I have spent 4 hours online with a justanswer.com analyst and he tried various things like copying to an isa and changing various settings but it did not work
Virtual machine software makers won't violate Apple's EULA's.
You can only run OS X on Apple hardware.
However there is a solution if your willing to run Linux, it looks and acts like OS X (even better in some areas) and it's free to download and use.
You won't be able to run OS X software, but free Linux software instead.
The best way to go about this is to download and then install Linux Mint 10 (DVD 32bit Gnome) into your VirtualBox,
http://www.linuxmint.com/release.php?id=15
Next perform this Linux adjustment in terminal (in Linux)
http://community.linuxmint.com/tutorial/view/326
Once you do that then you can update Linux Mint via the Update Manager.
What this will do is give you Linux Mint, which is the best Linux version (especially for newbies as everything is included), it has the gnome desktop based upon Ubuntu Linux, then after making the MacBuntu desktop switch you'll have a OS X looking UI on your PC in VirtualBox. (safer)
The instructions work for Linux Mint 10, so that's why I gave you Linux Mint 10 link, even though Linux Mint is at 12, so you upgrade from within Linux Mint to 12 later got it?
Search YouTube to see what MacBuntu looks like yourself.
Remember your installing Linux into VirtualBox running under Windows, don't create a boot cd of Linux and install it directly onto your Windows machine without knowing full well what your doing as Windows could disappear as a result.
Note: With Mac's we are pretty much stuck ONLY running OS X on our machines (and Windows 7), Apple doesn't support anything else, but on your PC hardware you can run any operating system you want, just not OS X.
http://distrowatch.com/
Good Luck -
Oracle virtual box and OEL 64 bit installation
Hi,
Wonder if anyone can help.
I have a centos5 x86-64bit installation and have downloaded virtualbox and have started to install OEL 64bit.
All appear well until I get a message saying that
yelp-2.16.0-13.el5.x86_64 cannot be opened.
I can either retry (the result is the same message) or I can reboot which seems to defeat the object of the exercise.
does anyone have any experience on how to resolve this issue?
regards
AlanHi Alan,
to be honest, I always took the "DVD iso" to install... not the CD images. I never tried the CD images...
Furthermore yelp-2.0.16-13 is OEL 5.0... which is pretty old, I would suggest you at least taking the CDs of OEL 5.4....
I could imagine that the VM support was not that good in OEL 5.0...
Regards
Sebastian -
Install failure in Virtual Box
First start-up of BETA 10 x64 Displays the following message under Oracle Virtual Box:
Your PC Needs to restart. Please hold down the power button. Error Code: 0X0000005D
Parameters:
0x00000000078BFBFF
0x0000000028100800
0x0000000000000001
0x0000000000000000
Installation requirements are met.
Suggestions?Hi,
I have upgraded my VirtualBox Vm to 10049. I did not have any problems, it took a long time though. As others have said, check your video memory (I have 128MB) also your free HDD space, You should need at least 8GB free. I am running VirtualBox v 4.3.24.
Hope this helps.
Paul -
Installing solaris in virtual box
HI Everyone
i have installed solaris 10/09 os in oracle virtual box 4.0.2
Im facing following problems as mentioned below
1. I have installed usb driver and network driver for the virtual box and i have succesfully installed the extension packs also . while logging in to virtual machine
it captures my usb keyboard and usb mouse ,it not allows them to access the application of host os(windows xp) until i logout from virtual machine.
2.Usb mouse is working in virtual machine but im not able to see the mouse pointer and then i can identify the mouse movement when mouse accelaration is very slow.
3.I can't able configure internet connection for virtual machine in default adapter NAT.when i change the setting to host only network adapter
VM doesn't boot it runs continuosly with the message conflict with ip address
4.Can't able to adjust the screen resolution more than 800 x 600 .
Can you suggest me the solution for all these problems1. I have installed usb driver and network driver for the virtual box and i have succesfully installed the extension packs also . while logging in to virtual machine
it captures my usb keyboard and usb mouse ,it not allows them to access the application of host os(windows xp) until i logout from virtual machine.Are you using your Host Key sequence to "break out" of the VirtualBox window. The Host Key should be displayed in the lower right-hand corner of the VirtualBox machine's window. A pop-up message will also appear when you first start up the virtual machine, explaining that you will need the host key to escape out.
>
2.Usb mouse is working in virtual machine but im not able to see the mouse pointer and then i can identify the mouse movement when mouse accelaration is very slow.Do you also have Guest Additions installed?
>
3.I can't able configure internet connection for virtual machine in default adapter NAT.when i change the setting to host only network adapter
VM doesn't boot it runs continuosly with the message conflict with ip address
4.Can't able to adjust the screen resolution more than 800 x 600 .
Can you suggest me the solution for all these problemsI'm not sure of the other problems, but you could try downloading the Solaris 10 9/10 VirtualBox appliance, which is a preinstalled image including Guest Additions:
http://download.oracle.com/otn-pub/solaris/virtualization/Solaris10_9-10_VM.zip
-- Alan -
Can't install oracle 10g on windows XP(Virtual Box)
Hi all,
I have installed windows XP in Virtual Box, trying to install Oracle 10g in it. It won't start the installation..no clue about it. I installed winrar(as the 10g setup was in rar format, had to extract it).
without any issues winrar got installed, where as Oracle 10g simply wont get installed...no error message is thrown..
in fact I have installed 10g on a XP PC just last week..not sure where what I am missing
i am using "Briged Adapter" Network
If anybody has experienced same issue, kindly let me know....
mohibHi Srini,
Thanks for helping me with the link to be frank I had looked into it long back...
yes the software worked just yesterday, I had installed on XP(different machine).
I added my PC to domain, logged in as Administrator & double clicked, same....no response.
At last I used "command prompt" and it worked!! not sure how or why...but worked.
Now my database is created successfully
Yes would like to know why this happened....and how things worked via command prompt & not by double click....would greatly appreciate if anybody helps me on this. -
Installing oracle db 10.2.0.1 on REHL 5.6 using virtual box
I can't solve this erratic behavior:
Scenario: Phisical machine Windows 7 32b, virtual box v 3.2.12
Virtual machine Oracle Linux 5.6 64b installed without problems (I have installed several machines with p.e. SuSE 10 64b,
SuSE 11 64b and installed Oracle 10g without problems, Linux Oracle 5.6 with Oracle DB 11 ok)
Trying to install Oracle 10.2.0.1 (need to be this version) every time I exec runInstaller, it begins, but simply freezes the
machine. Each time it freezes at different points: sometimes at the first screen, other times I can reach the last screen with
the install button.
¿can someone give any ideas ?
ThanksFirst attempt
The oui freezed the virtual machine, in the screen where i was setting the users passwords
Checking the oraInventory/logs folder, ther are 3 files:
1) orainstallxxxx.err is empty
2) orainstallxxxx.out is empty
3) InstallActions.log: as follows (I'll cut several "middle" lines because of the 30000 characters limits in the forums messages)
INFO: Using paramFile: /opt/install/database/install/oraparam.ini
INFO: Checking installer requirements...
INFO: Checking operating system version: must be redhat-3, SuSE-9, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1 or asianux-2
INFO: Passed
INFO: All installer requirements met.
INFO: The number of files bootstrapped for the jre is 619.
INFO:
INFO: The number of files bootstrapped for the oui is 94.
INFO: Execvp of the child jre : the cmdline is /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java, and the argv is
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oio.oioc.OiocOneClickInstaller
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oii.oiic.OiicInstaller
INFO: UnixGroups="{oinstall,dba,}"
INFO: -scratchPath
INFO: /tmp/OraInstall2011-05-24_11-54-43PM
INFO: -sourceLoc
INFO: /opt/install/database/install/../stage/products.xml
INFO: -sourceType
INFO: network
INFO: -timestamp
INFO: 2011-05-24_11-54-43PM
INFO: -oneclick
INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = /opt/install/database/install:/usr/bin:/usr/ccs/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
INFO: CLASSPATH =
INFO: Username:oracle
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to '/tmp/OraInstall2011-05-24_11-54-43PM/prereq'. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO: Retrieving the global context: OiicGlobalContext.getGlobalContext()
INFO:
*** Welcome Page***
INFO:
*** Specify Inventory directory and credentials Page***
INFO: Setting the 'InventoryLocation ( INVENTORY_LOCATION )' property to '/opt/oracle/oraInventory'. Received the value from the UI page.
INFO: Setting the 'UnixInstallGroup ( UNIX_GROUP_NAME )' property to 'oinstall'. Received the value from the UI page.
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO: Unable to read the list of homes from the inventory.
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: /opt/install/database/stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 10.2.0.1.0, >0.0.0.0.0, [ 46 ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'EE'. Received the value from the UI page.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'EE,'. Received the value from the UI page.
INFO: The selected install type is "Enterprise Edition".
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraDb10g_home1'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom /tmp/OraInstall2011-05-24_11-54-43PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.server_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.server Product Location: Empty path specified.
INFO: This is not a cluster system.
variable = oracle.sysman.server.EMConfigureOption
value = LOCAL
INFO: Query Returned: true
INFO: Setting variable 's_recoveryAreaDestination' to ' -recoveryAreaDestination NO_VALUE '. Received the value from a code block.
INFO:
*** Specify Database Schema Passwords Page***
Maybe you are looking for
-
My iPhoto says it is in use by another application or has become unreadable. Nothing I have done is working? I've tried restarting my compuer, holding down the command and option keys as I open it and have tried downloading another version of the iPh
-
Does anyone know how to recover folders that are missing from your System Preferences?
-
I have installed a new windows 7 computer (Dell) and downloaded the latest version of ITunes. How can I populate my music into ITunes from my I-pod classic?
-
Add application and document level events using javascript
Hi All, I need to do some validation in the preprint event of the pdf document. There are samples available using the UI and adding the script in the script dialog, but my requirement is that i need to map the 'preprint' event and event handler to th
-
I Tried to open a document via e-mail but it didn't work
I Tried to open a document I got via e-mail but it said upgrade to newest version of reader but I am running newest version. I tried uninstalling reader and re-installing but still the same error message this is the error message Thanks 4 your help