[Oracle VM 3.1.1] Fresh install, update python bindings on server failed

Hello,
I've installed the Server and Manager components. I'm trying to discover the VM server from the manager's web interface. I'm getting the following error message:
OVMAPI_4010E Attempt to send command: get_api_version to server: <Internal_IP_Of_Server> failed. OVMAPI_4004E Server Failed Command: get_api_version , Status: org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Connection refused
Can I please get some advice on troubleshooting this?
Thanks.
P.S. I have both installed on VMs in VMWare. Dunno if this makes a difference....
Edited by: 964530 on Nov 12, 2012 1:57 PM
EDIT2: I reinstalled the VM Server on a physical server and tried discovering it. I now get this error:
+OVMAPI_4004E Server Failed Command: update_core_api_bindings http://0.0.0.0:7001/ovm/core/bindings/python_3.1.1.305.zip, Status: org.apache.xmlrpc.XmlRpcException: urlgrabber.grabber.URLGrabError:[Errno 14] curl#7 - "couldn't connect to host"+
EDIT3: I tried to do this thing from the Oracle VM Manager directly and it worked. Well, at least it ADDED the VM Server.
But now that it's added, I'm seeing errors as follows coming from that machine (the server):
Timestamp: Nov 13, 2012 10:09:26 am
Status: Failed
Description: Update Python Bindings on server: OracleVMServer.domain
Created By: @OvmAdmin
Duration: 340ms
Start Time: Nov 13, 2012 10:09:28 am
End Time: Nov 13, 2012 10:09:28 am
+Message: (11/13/2012 10:09:28:377 AM) OVMAPI_4010E Attempt to send command: update_core_api_bindings to server: OracleVMServer.domain failed. OVMAPI_4004E Server Failed Command: update_core_api_bindings http://0.0.0.0:7001/ovm/core/bindings/python_3.1.1.305.zip, Status: org.apache.xmlrpc.XmlRpcException: urlgrabber.grabber.URLGrabError:[Errno 14] curl#7 - "couldn't connect to host" Tue Nov 13 10:09:28 EST 2012 Tue Nov 13 10:09:28 EST 2012+
NOTE: I tried a wget on both the manager and the server for this file and I was able to download it no problem. Is it really using the 0.0.0.0 IP address to try to download the file? Why?
Edited by: 964530 on Nov 13, 2012 7:21 AM

No ideas? Nothing?

Similar Messages

After installing Update 10.6.2 Server Netboot don`t work any more

After installing the combo update 10.6.2 Server Netboot dont work any more.
This is the log oft from Serveradmin Netboot:
Nov 10 15:53:48 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:53:48 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:53:48 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:53:48 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:53:48 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:53:48 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:53:48 xserver01 bootpd[1783]: service time 0.001230 seconds
Nov 10 15:54:04 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:04 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:04 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:04 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:04 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:04 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:04 xserver01 bootpd[1783]: service time 0.001111 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP DISCOVER [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: OFFER sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.016331 seconds
Nov 10 15:54:17 xserver01 bootpd[1783]: DHCP REQUEST [en0]: 1,0:24:81:12:e1:81
Nov 10 15:54:17 xserver01 bootpd[1783]: replying to 10.0.50.97
Nov 10 15:54:17 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.97 pktsize 300
Nov 10 15:54:17 xserver01 bootpd[1783]: service time 0.000840 seconds
Nov 10 15:54:37 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:54:37 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:54:37 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:54:37 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:54:37 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:54:37 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:54:37 xserver01 bootpd[1783]: service time 0.015980 seconds
Nov 10 15:55:41 xserver01 bootpd[1783]: BSDP INFORM [en0] 1,0:11:24:7e:fd:76 NetBoot001 arch=ppc sysid=PowerMac7,3
Nov 10 15:55:41 xserver01 bootpd[1783]: replyfile /private/tftpboot/NetBoot/NetBootSP0/NetInstall 10.5 + Update 10.8 combo.nbi/ppc/booter
Nov 10 15:55:41 xserver01 bootpd[1783]: NetBoot: [1,0:11:24:7e:fd:76] BSDP ACK[SELECT] sent 10.0.50.96 pktsize 384
Nov 10 15:55:41 xserver01 bootpd[1783]: DHCP INFORM [en0]: 1,0:11:24:7e:fd:76
Nov 10 15:55:42 xserver01 bootpd[1783]: reply ciaddr 10.0.50.96
Nov 10 15:55:42 xserver01 bootpd[1783]: ACK sent <no hostname> 10.0.50.96 pktsize 300
Nov 10 15:55:42 xserver01 bootpd[1783]: service time 0.686362 seconds
any ideas!??! The client is a MacPro G5

Please refer Troubleshooting EMCA Failures in
Master Note for Enterprise Manager Configuration Assistant (EMCA) in Single Instance Database Environment [ID 1099271.1]
Thanks....

Error Install Update Rollup 3 Exchange Server 2010 SP2

Hy Guys,
I have the follow troubble when i try install the Update Rollup 3 Exchange 2010 SP2 on CAS Server. The error is "The user who's currently logged on doesn't have sufficient permissions to install this package. You need at least Exchange Server Administrator
permissions on the current computer to complete the task."
I've checked the permissions of the user which run the installer and those permissiones are OK. The user belong to Domain Admin, Enterprise Admin, Exchange Organization Management groups.
I don't know what else to do. Thanks for your great help.

Hi Wilmar
Do you have PowerShell execution policy via Group Policy that could be blocking the install? If you right click the file and select "Run as Administrator"?
Can you try running the setup from an elevated command prompt?
Or you can enable logging by executing the patch like this below:
Rollup3.msp /lxv* c:\Rollup3.log
You can also look here:
http://technet.microsoft.com/en-us/library/ff772434(EXCHG.80).aspx
http://exchangeshare.wordpress.com/2009/05/30/exchange-update-rollup-installation-it-is-not-nightmare/

Fresh install: Discussion Board item "alert me" errors Web Parts Maintenance Page

This happens on a freshly installed Sharepoint 2013 Foundation standalone server.
I create a standard Discussion board app and add a discussion post. I enter the post, and use the "alert me" option (under the post, not in the top ribbon). I hit ok on the alert settings and get the "sorry, something went wrong"
page. Doesn't matter what user tries to use the "alert me" option, same error occurs. Doesn't matter if I create a new web application or site collection, Discussion board always does this. Just to note, even though there is an error, the alert is
still created.
An unexpected error has
occurred.
Web
Parts Maintenance Page: If you have permission, you can use this page to
temporarily close Web Parts or remove personal settings. For more information,
contact your site administrator.
Application error when access /Lists/tax discussion/Flat.aspx, Error=Value does not fall within the expected range.
at Microsoft.SharePoint.SPContentTypeId..ctor(String id)
at Microsoft.SharePoint.SPViewContext.get_FolderContentTypeId()
at Microsoft.SharePoint.WebControls.ViewSelectorMenu.AddMenuItems()
at Microsoft.SharePoint.WebControls.ToolBarMenuButton.CreateChildControls()
at Microsoft.SharePoint.WebControls.ViewSelectorMenu.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)
at Microsoft.SharePoint.WebControls.ToolBarMenuButton.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.AddedControl(Control control, Int32 index)
at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()
at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.ArgumentException: Value does not fall within the expected range.
at Microsoft.SharePoint.SPContentTypeId..ctor(String id)
at Microsoft.SharePoint.SPViewContext.get_FolderContentTypeId()
at Microsoft.SharePoint.WebControls.ViewSelectorMenu.AddMenuItems()
at Microsoft.SharePoint.WebControls.ToolBarMenuButton.CreateChildControls()
at Microsoft.SharePoint.WebControls.ViewSelectorMenu.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)
at Microsoft.SharePoint.WebControls.ToolBarMenuButton.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.AddedControl(Control control, Int32 index)
at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()
at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

This issue is known by Microsoft but there is no ETA on a fix. My case for this issue was closed a few days ago on this problem.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to install update manager on server 2012r2

When I try to install update manager in says that the product can only be installed on a 2008 or later server. This is...
Also receive a message that internal error occurred in vsphere client... unable to connect to the remote server.
I had install update manager on a server which is not longer available.

Which version of Update manager are you trying to install?
5.5 U1 and forward are supported on 2012 R2

Impossible to install updates on windows 8.1

"Windows update" makes the whole
installation process but when you restart
the message "Unable to finish installing
updates" appears.

If the troubleshooter fails to help, you might want to try these things:
Open a CMD prompt and try SFC /VERIFYONLY. This is the Microsoft System File Checker. If it reports problems such as changed or missing system files, try the SFC /SCANNOW
command to auto-correct them.
If SFC /SCANNOW fails to correct problems, try the command DISM /Online /Cleanup-Image /ScanHealth
to check for problems with the Microsoft Deployment Image Servicing and Management tool, and the DISM /Online /Cleanup-Image /RestoreHealth
to have Windows try to find the files that are corrupted online and restore them.
Good luck.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

ORA-28547: connection to server failed, probable Oracle Net admin error

Hi Gurus
I can't get the gateway to work? I'm running on AIX. Any suggestions are appreciated.
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
# (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=dg4msql)
(ORACLE_HOME=/oracle/rcsr/base/product/11.2.0/gateway)
(PROGRAM=dg4msql)
tnsnames.ora
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
sqlnet.ora
SQL_AUTHENTICATION_SERVICES = (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = /oracle/rcsr/base
initdg4msql.ora
HS_FDS_CONNECT_INFO=142.178.205.42:1433//komodo
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=debug
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
$ lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production on 03-MAY-2013 13:48:01
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
Start Date 03-MAY-2013 13:38:14
Uptime 0 days 0 hr. 9 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /oracle/rcsr/base/product/11.2.0/gateway/network/admin/listener.ora
Listener Log File /oracle/rcsr/base/diag/tnslsnr/abe-rcsr-01/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
$ tnsping dg4msql
TNS Ping Utility for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production on 03-MAY-2013 13:48:53
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/oracle/rcsr/base/product/11.2.0/gateway/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
$ sqlplus aa/aa@dg4msql
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 3 13:49:52 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-28547: connection to server failed, probable Oracle Net admin error

You can't directly use the gateway - you can only access a gateway using a database link.
So this won't work:
$ sqlplus aa/aa@dg4msql
You need to connect to your Oracle database (for example as sysdba) and create a (public) database link:
create [public] database link dg4msql connect to "<MS SQl Server username! identified by "<MS SQl Server password>" using 'dg4msql;
Once you create the database link you can now access the MS SQl Server tables:
select * from "your MS SQL Server table"@dg4msql;

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

Fresh install of 10.5 hangs at boot after 10.5.8 update

I'm troubleshooting a MacBook that hangs at start-up after installation of the 10.5.8 complete update. I've run Disk Utility (no errors), fsck (fixed a single error), and repair permissions (oddly, repaired a few on this fresh install). I've booted into verbose mode, and it appears that there's an infinite loop of:
localhost DirectoryService[#]: Launced version 5.8.1 (v514.28)
localhost ReportCrash[#]: Saved crashreport to /Library/Logs/CrashReporter/DirectoryService. . . .(it goes on, but it's just date info).
Again, this is a fresh installation of 10.5. The only programs that have been updated are those updated through Apple Update. I did have problems installing the 10.5.8 update through the Update utility because "the package contents could not be verified," but the update installed fine after I downloaded it from Apple's site.
Any ideas?

I'm troubleshooting a MacBook that hangs at start-up after installation of the 10.5.8 complete update. I've run Disk Utility (no errors), fsck (fixed a single error), and repair permissions (oddly, repaired a few on this fresh install). I've booted into verbose mode, and it appears that there's an infinite loop of:
localhost DirectoryService[#]: Launced version 5.8.1 (v514.28)
localhost ReportCrash[#]: Saved crashreport to /Library/Logs/CrashReporter/DirectoryService. . . .(it goes on, but it's just date info).
Again, this is a fresh installation of 10.5. The only programs that have been updated are those updated through Apple Update. I did have problems installing the 10.5.8 update through the Update utility because "the package contents could not be verified," but the update installed fine after I downloaded it from Apple's site.
Any ideas?

Fresh install of Oracle VM Manager Template into Oracle VM Server

Hi,
I am trying to install the Oracle VM Manager template and then
create an Oracle VM Manager client.
I have already done a 'fresh install' of Oracle VM Server.
I do not have another machine available to use to contain the
'Oracle VM Manager', therefore, I am attempting to install the
Oracle VM Manager template directly into an Oracle VM Manager Server and
run the client.
I am following the instructions of the Oracle VM Server Users Guide
in section 4.3.
When I extract the zip file contents into the
/OVS/seed_pool directory, I get the following files.
Deploy_Manager_Template.sh
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
So far, so good.
Next, I used 'tar' to help me extract the directories of the .tgz file.
So far, so good.
Next, as instructed, I used 'python' and 'print randomMAC()' to create a new MAC address.
Inside the /OVS/seed_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM/vm.cfg file
I modified the vif MAC address. I replaced the
xx:xx:xx with the 'last three' that were generated by the python randomMAC
function from above.
vif = [ 'mac=00:16:3E:<my generated numbers>', ]
So far, so good?
In the Oracle VM Server Users Guide in section 4.3.,
The next step, expains that I should run
xm create mv.cfg
I did this. When I ran this I received back the error.
Using config file "./vm.cfg"
Error disk is not accessible.
When I peek inside my vm.cfg file.
I see file references starting with the following
file:/OVS/running_pool/ ...
Of, course my running_pool directory is empty.
(Again, this is a fresh install of Oracle VM Server).
My first question is the following.
Sometime in this process was I supposed to run
the the following executable?
./Deploy_Manager_Template.sh
If so, should I have done this early?
Was the modification of the vif (of adding the MAC address
into the vm.cfg file, something I 'should have not done'
or 'something that could be ignored' because the
'./Deploy_Manager_Template.sh' would have done this for me?
My second question is the following.
Would the following process be 'more correct?'
..1 Not modify the vm.cfg' file.
..2 run ./Deploy_Manager_Template.sh.
..3 In the /OVS/running_pool/ directory find my
vm.cfg file of interest, then modify the vif with a new MAC address.
..4 In /OVS/running_pool/Change my current location to my directory of interest
run xm create vm.cfg (to run my Oracle VM Manager)?
Any help or ideas whould be appreciated.
Thank you very much,
AIM

Hi,
This is the README file for Oracle VM Manager 2.2.0
Readme for Media Pack B57738-01
Print: Access key=P Close: Access key=C
Oracle VM Templates for Oracle VM Manager 2.2.0 Media Pack v1 for x86 (32 bit)
=====================================================================
Template Version 2.3
Oracle VM Manager Version 2.2.0
This document contains:
1. Prerequisites for Oracle VM Manager virtual machine (VM) deployment
2. Oracle VM Manager Template description
3. Creating an Oracle VM Manager Virtual Machine from
Oracle VM Manager Template
4. Deployment Interview
5. Known Issues
For more information on Oracle VM Manager, please refer to
the "Oracle VM Manager Installation Guide" and the "Oracle VM Manager
User's Guide" available at:
http://download.oracle.com/docs/cd/E15458_01/index.htm
1. Prerequisites
================
- A new install of Oracle VM Server 2.2 that has NOT been managed by another
Oracle VM Manager. Manager Template 2.2 is intended to be installed on Oracle
VM 2.2 server. If you have a new Oracle VM 2.1.5 server and want to deploy
Oracle VM Manager template, please use the Oracle VM 2.1.5 Manager template.
Note: root access to the server's dom0 is required.
- It's highly recommended that you upgrade the default agent (ovs-agent-2.3-19)
to ovs-agent-2.3-27 or later. You can get the latest Oracle VM 2.2 packages
from Oracle's Unbreakable Linux Network (http://linux.oracle.com).
Note: Alternate location to get Oracle VM agent 2.3-27 is
http://oss.oracle.com/oraclevm/server/2.2/RPMS/ovs-agent-2.3-27.noarch.rpm
- A working directory of the Oracle VM Server 2.2 has at least 4GB free space
for downloading and installing the template. The working directory can be any
directory on the Oracle VM server except /OVS/running_pool.
Note: The /root partition of the default Oracle VM server install may not have
enough space to temporarily host the template installation. Please use other
directory that has sufficient free space.
- At least 15GB of free space in the cluster root storage repository. For storage
and repository configuration, please refer to Oracle VM 2.2 Server User Guide:
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/storage.htm
and
http://download.oracle.com/docs/cd/E15458_01/doc.22/e15444/repository.htm
- At least 2GB of free memory on the Oracle VM Server
- A static IP address for the Oracle VM Manager
- If enabling HA (high availability) for the Oracle VM Manager,
mount a clustered OCFS2 or NFS filesystem on /OVS. If ext3 or a
local OCFS2 filesystem is used, enabling HA will cause the high availability
prerequisite checking to fail. The Oracle VM Manager configuration
process will exit without completing the configuration.
- The Oracle VM Manager will register the first VM that it detects.
To have Oracle VM Manager be the first VM registered,
make sure there are no virtual machine images besides the Oracle VM Manager
virtual machine in the /OVS/running_pool directory on the Oracle VM Server.
- A desktop or other system with a VNC Viewer installed
The steps below assume that the Oracle VM Server used is not currently
or was not previously managed by another Oracle VM Manager. If this is not
the case, the instructions below will ask user clean up Oracle VM Agent DB
before running the Oracle VM Manager.
2. Oracle VM Manager Template Description
=========================================
The Oracle VM Manager Template is distributed as one archive file which
includes:
File Version
OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz 2.3
Deploy_Manager_Template.sh 2.3
The OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz archive contains two disk images,
a VM configuration file and a readme file:
- Oracle Enterprise Linux 5.3 x86 system disk image
- Oracle VM Manager 2.2 disk image
- vm.cfg
- README
The system image is a JeOS (Just enough OS) installation of Oracle
Enterprise Linux 5.3. It is a smaller footprint install that contains
the only packages needed by Oracle VM Manager.
Oracle VM Manager is configured to use Oracle Database 10g
Express Edition (included).
Deploy_Manager_Template.sh is used to check the prerequisite and
create virtual machine.
During the first boot of the Oracle VM Manager virtual machine,
the Oracle VM Manager configuration process will create server pool
and import the Oracle VM Manager virtual machine.
Two OS user accounts are created by default:
user: root password: ovsroot
user: oracle password: oracle
The user 'oracle' belongs to the 'oinstall' and 'dba' groups.
The default vnc console password is 'oracle'
3. Creating the Oracle VM Manager virtual machine
=================================================
1) Download the Oracle VM Manager Template (V19215-01.zip)
from http://edelivery.oracle.com/oraclevm
2) Login to the Oracle VM Server's dom0 as 'root'
Copy V19215-01.zip to your working directory with at least 4GB free space.
You can choose any directory on OVM Server except /OVS/running_pool.
This zip file contains the archive file OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz
and a deploy script Deploy_Manager_Template.sh
3) As root, run
# unzip V19215-01.zip
4) As 'root', run the deployment script:
# chmod 755 Deploy_Manager_Template.sh
# ./Deploy_Manager_Template.sh
The deployment script Deploy_Manager_Template.sh will complete the following
tasks:
a) prerequisite checking
b) uncompress OVM_EL5U3_X86_OVM_MANAGER_PVM.tgz file to directory
/OVS/running_pool. This directory will contain the files following files:
/OVS/running_pool/OVM_EL5U3_X86_OVM_MANAGER_PVM
|- System.img (OS image file)
|- Manager.img (Manager image file)
|- vm.cfg (VM configuration file)
|- README (Readme file)
c) generate and assign new MAC address to the virtual machine
d) interview the user for VM and VM Manager configuration parameters
(next section 'Deployment interview' provides the list of questions)
e) create and boot the virtual machine from the Oracle VM Server
command line
f) display the access information for Oracle VM Manager and Oracle VM
Manager VM
4. Deployment Interview
=======================
The deployment script will prompt a user to enter
a) Agent password
The agent password is required for the prerequisites check.
b) Storage configuration
Storage Source: NFS address, OCFS2 partition path
The script will automatically detect your cluster root storage repository
if you have configured it. Or it prompts users to input their storage source
and the script tries to set it up as cluster root.
NOTE: how to manually create your own storage repository in OracleVM server 2.2.x
1) Register your storage source. Example:
/opt/ovs-agent-2.3/utils/repos.py -n myhost:/mynfslocation
/opt/ovs-agent-2.3/utils/repos.py -n /dev/sdb3
Note that the storage source should have at least 15GB free space.
If the storage source is successfully registered, note down the uuid genereated
by the command above, such as:
51d4c69b-e439-41ac-8b31-3cc485c993b0 => /dev/sdb3
2) Mount your storage repository.
If the agent version is 2.3-27 or higher, execute:
/opt/ovs-agent-2.3/utils/repos.py -i
otherwise, complete the following commands:
[1] mkdir -p /var/ovs/mount/$(echo <uuid> | sed s/-//g | tr '[:lower:]' \
'[:upper:]')"
where '<uuid>' is the uuid noted down in step 2)
[2] mount your storage source to the directory made in step [1].
3) If /OVS exists, delete or move /OVS
mv /OVS "/OVS.$(date '+%Y%m%d-%H%M%S').orig"
create a symbolic link from storage repository to /OVS
ln -nsf /var/ovs/mount/<UUID>/ /OVS
c) Network configuration
Static IP address
Netmask
Default Gateway IP address
DNS Server IP address
Hostname
d) Password for database accounts:
'SYS' and 'SYSTEM' (the same password the same password is used)
'OVS'
'oc4jadmin'
'admin'
e) Web Service configuration (supported in template in version 1.2)
Web Service password (at least 6 characters)
Enable HTTPS or not
f) SMTP server (outgoing mail server SMTP hostname)
E-mail Address for account 'admin'
g) Data for the manager services configuration:
Oracle VM Server Pool Name
Oracle VM Server login user name
Oracle VM Server login password
Note that Oracle VM Manager is critical for managing Oracle VM Server Pools.
Do not pause, suspend or shutdown this virtual machine! Configuring
HA is recommended for this virtual machine so that Oracle VM will
automatically restart the Oracle VM Manager virtual machine if there
is a server crash.
5. Known Issues
===============
1) You may see messages on a virtual machine's console similar to these
when the virtual machine is booting up:
Fatal: No PCI config space access function found
rtc: IRQ 8 is not free.
i8042.c: No controller found.
These messages can be ignored.
2) Mail server check fails.
Bug #7140 in bugzilla.oracle.com
Oracle VM Manager installer only checks the default SMTP port 25 for the
mail server. If the SMTP port is not 25, the check fails, and you will
see the following message:
Mail server '<mail server hostname>' check failed, want to re-enter it(Y|n)?
You can enter 'n' to skip the mail server checking. You will also see the
send mail checking fails with following message:
Failed to send mail to '<Admin e-mail address>'
want to re-enter the e-mail address(Y|n)?
You can enter 'n' to skip the send mail checking.
3) OEL VM console may display error messages similar to those below:
BUG: warning at drivers/xen/fbfront/xenfb.c:143/xenfb_update_screen() (Not
tainted)
Call Trace:
[<ffffffff803aa461>] xenfb_thread+0x135/0x2c5
[<ffffffff8024874b>] try_to_wake_up+0x365/0x376
[<ffffffff8029ba6e>] autoremove_wake_function+0x0/0x2e
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff803aa32c>] xenfb_thread+0x0/0x2c5
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802339c8>] kthread+0xfe/0x132
[<ffffffff80260b24>] child_rip+0xa/0x12
[<ffffffff8029b856>] keventd_create_kthread+0x0/0xc4
[<ffffffff802338ca>] kthread+0x0/0x132
[<ffffffff80260b1a>] child_rip+0x0/0x12
This will not cause any problems.
4) If you accidentally power off Oracle VM Manager virtual machine through
Oracle Manager UI, and restart the virtual machine from OVM server command
line, although Oracle VM Manager virtual machine is running normally,
the virtual machine status in Manager UI will stay in 'Shutting Down'.
This is expected, as the virtual machine status sync will only happen when
the virtual machine status is "Error" or "Powered Off".
To re-sync the virtual machine status, please complete the following steps:
1. Log on the Manager UI;
2. Navigate to the 'Virtual Machines' tab;
3. Select Oracle VM Manager virtual machine, "OVM_EL5U3_X86_OVM_MANAGER_PVM";
4. Choose 'Reset' from 'More Actions' dropdown list;
5. Click 'Go' button, the status will become "Running" after a while.
5) (Bug 9191053) For OVS agent version 2.3-19, the following High
Availability scenario will not work.
"If a Virtual Machine Server fails, all running virtual machines are
restarted automatically on another available Virtual Machine Server."
For OVS agent 2.3-19, Oracle VM Manager virtual machine will not be
automatically restarted on any other available Virtual Machine Server,
but on the original Virtual Machine Server when it becomes available again.
To fix the issue, please upgrade OVS agent to 2.3-27 or the latest version.

Trouble updating fresh install of CS5.0 on Mac

Hi,
I am in a corporate environment with CLP licenses of Adobe Creative Suite Design Premium CS5.0. Because we use some very expensive plugins, along with InDesign Server, and are connected to a database publishing program, there are a lot of dependencies preventing us from upgrading at this time.
Recently we have upgraded our Macs to OSX 10.9.2 from Snow Leopard without incident. All existing licenses were preserved and work correctly. However one of the Macs, a 27" IMac needed to have a fresh install of Mavericks for reasons unrelated to this post. I was able to install the Suite and open each application without issue from the original electronic dowload file. However, attempts to update the suite using the built-in AAME update method fails with each attempt, due to download errors. So one question is, is this because of something Adobe did that changes the download location, or do I have some sort of security blocking downloads of this nature from Adobe? (I did set preferences to permit non-Apple Store downloads.)
I can search for the individual updates and find them with a search. I updated Bridge successfully using this method. I then attempted to update Illustrator to 15.0.2, and it appeared to be successful. However, following this Illustrator would no longer open. It had an X through the application and a message appeared on opening that this version of Illustrator would not open on this type of Mac. Is there a particular order in which I must install these updates? As I write, I have unistalled the Suite, reinstalled it to the point where no updates have been attempted.
Thanks to anyone who can point me in the right direction.

Thanks for the reply, Jeff. The download errors I am receiving are generic, 'download error, try again' type of thing. I did disable Mac's security preference. I also spoke to our IT group about the possibility of things being blocked, but since I can download the updates directly from Adobe, they didn't think I was being blocked. It's hard to determine if the Application Manager is downloading those from some other location that is blocked compared to the manual download location-. So just before I received your answer, I began installing the individual updates, taking a guess as to an optimal order, leaving Bridge, with its shared dependencies until after the core updates were in there. I actually found that some manual updates failed, and these were only successful through AAME after most of the others were installed manually. Here, with all its warts is how I eventually got it all updated, in case anyone else runs into this. Seems like Adobe may have moved things around so that the AAME can no longer find what it needs. I was also informed by Adobe that telephone support for CS5 has ended.
Installed Illustrator 15.0.2 manually, opened successfully
Installed InDesign 7.0.4 manually, opened successfully
Installed Photoshop 12.0.4 manually, opened successfully
Installed Flash Pro CS5 11.0.2 manually, opened successfully.
Installed Dreamweaver 11.0.4 manually, restarted computer. Extension Manager opens then quits unexpectedly.
Installed Extension Manager 5.0.3 manually, permitting extensions updating in Mavericks
Opened Dreamweaver, Extension Manager then worked and finished installing extension.
Installed Adobe Fireworks 11.0.2 manually and opened successfully.
Installed Adobe Media Encoder CS5 5.0.1 AME_5.0.1_multiple_Mac.dmg manually successfully
Installed Adobe Bridge CS5 4.0.5 update manually successfully
Attempted Install of Adobe Player for Embedding 3.1 AdobeAPE3_mul_AdobeUpdate.dmg. failed
Attempted Install of Adobe XMP Panels AdobeXMPPanelsAll-AdobeUpdte.dmg failed
Attempted to get the rest of the way by installing through AAME the remaining pieces. All installed successfully except Adobe Pixel Bender Toolkit 2.5 and Photoshop Camera Raw 6.7 update and Adobe Player for Embedding 3.1
Installed Adobe Pixel Bender Tookit 2.5 manually successfully.
Installed Camera Raw 6.7.1 manually. (should have been 6.7, but it went in.)
Checked for more updates. Updater still said Adobe 6.7 required and Adobe Player for Embedding.
Ran AAME one more time and Adobe Player for Embedding was installed successfully.
Left 6.7.1 alone despite prompt in AAME to put in 6.7.

Fresh Bits! Oracle Java ME Embedded and ME SDK updates

Oracle has just refreshed the Java ME Embedded 3.3 EA and ME SDK 3.3 EA binaries.
For more information, please see my blog: https://terrencebarr.wordpress.com/2013/06/13/fresh-bits-oracle-java-me-embedded-and-me-sdk-updates/
Best regards,
Terrence Barr
Principal Product Manager, Oracle

Hello,
I am just viewing this course now and am stuck on finding the raspberry pi 8.1 EA binary:
oracle-jmee-8-1-ea-raspberrypi-linux-bin-b01-20_may_2014.zip
The only thing I can find on this page (which is what the document your link brings up has)
http://www.oracle.com/technetwork/java/embedded/javame/embed-me/downloads/index.html
is 8.0:
oracle-jmee-8-0-rr-raspberrypi-linux-bin.zip
Please help...
Thanks

If I download the latest OSX update via the App Store, can I choose to do a fresh install instead of an update?

That's basically the question - since I get a RAM error upon trying to freshly install the OS on my MBP (disc or SD card), I find this to be the last remedy. I already tried switching the RAM. I'd like to sell my device, so I wanna "reset" it. Can I choose to freshly install OSX when downloading the Mountain Lion update?

That is not a RAM issue. You're trying to boot from a Mac OS X version too old for the computer.
(68462)

Plugging in Charger while Updating/Fresh Install

Hi guys,
I'm curious if it is OKAY to not have the adapter plugged in while doing an Update/Installation of an O.S. I have done so many times before with my old macbook , and nothing series has ever happened since I always do a fresh install when I know that my battery is higher then 75%.
Even when I partitioned my hard drive for Leopard, it started at 75% and when everything was done, I still had about 40%~45% left. And When I install Vista, It only uses about 10% battery life.
Does not plugging in the charger messes anything up such as showing it's percentage/battery time left? Or is it a "just in case" kind of thing?
I'm just curious. Thanks.

I'd classify it as a "just in case" since the battery vs. wall current issue is simply, for these occasions, boiling down to whether or not your MacBook is on or off (definitely a requirement). However, the likelihood of it going off or to sleep is much greater on battery power so it's a good idea to operate your MacBook plugged in during updates and installations. The results could be devastating if it went off in the middle.
So it's a strong "just in case"

[Oracle VM 3.1.1] Fresh install, update python bindings on server failed

Similar Messages

Maybe you are looking for