Oracle VM 3.1.1 on HP DL785 G6 server

Hello,
I have installed the OVM Server 3.1.1 on a DL785 Server from External USB DVD drive
the installation process was OK and installation finished successfuly
When I rebooted the server afterthe installtion a red full screen appeared with "Illegal OpCode" messages and other flags with Hex numbers.
the server reamins on this case until I force rebooting it manually then eturn to the same red screen
can anyone help in this case?
Regards,

Hi Dave,
The setings that should be done on the BIOS are:-
enable AMD Virtualization and Node Interleaving
This by referring to this document from HP "Oracle Applications running on HP ProLiant DL785 and StorageWorks MSA2000 with Oracle Virtual Machine technology"
[http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-7976ENW.pdf]
to see the red screen screen shot follow this URL:-
http://s18.postimage.org/708vv67kp/Illegal_Op_Code.png
Regards,

Similar Messages

Installing Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1

Hello,
how the subject says I'd like to install Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1. Can anybody of you say me where to find a good HOWTO/Documentation?? It would be nice if you help me!
Konstantin

This install is not on a Pentium 4
I'm trying to install on pentium III
Memory 512Mo
Hard Disk 20 Go
Thanks again

Oracle R12 EBS Forms not getting invoked in Windows server 2003

Hi,
I have installed Oracle EBS R12 in my personal laptop with Win2003 server as base OS. Until all these days I was able to launch the forms and work on EBS without any issues.
Today when I tried to login in and open a form, the system is just not responding. It is not launching the form applet. I checked the Java options and everything remain correct. My internet explorer settings are also proper and no firewall is existing. JRE version installed is 1.6.0_07. I even tried invoking test form from Oracle Forms options, but no form was launched.
The same issue happened a month before and I ended up installing Oracle again. However, I dont want to go to that option and requesting your valuable help to get this fixed.
Java console log is as mentioned below. Kindly check and help me getting this issue fixed.
Header 1
Java Plug-in 1.6.0_07
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL

Asif,
Finally I got the issue fixed. Did not download Java or any JRE version; because, the available version itself was Java 6 and the JRE version was 1.6.0_07.
The issue seems to be that, if the 'JRE Auto-Download' in Java control panel is set to 'Always Auto-Download' then java is trying to use the latest version available in their server. I then changed the setting to point to 'Prompt User' and tried opening a form and it worked!!!
Sounds like a solution to this issue and hope it doesn't recur. Will keep posted if I face any. Thanks for your help!
Navigation:
DO NOT TRY TO CLEANUP OR RE-INSTALL JAVA. TRY THE BELOW BEFORE YOU PERFORM SUCH THINGS.
Step1: Clear all cache and cleanup the history/temp memory in your browsers.
Step2: Close all your browsers (IE, Netscape, Chrome, Mozilla etc).
Step3: Check if your Java version is SE6 and JRE is pointing to version 1.6. You can check this in Java control panel -> General and Java tab respectively.
Step3: Control Panel --> Java (DClick) --> Go to Advanced tab --> expand "JNLP File/MIME Association" and "JRE Auto-Download" --> Select "Prompt User" in both and "Apply"
           In addition to this have the "Debugging" option enabled and "Show console" in the same tab.
Step4: Open IE and login to Oracle Apps. Click on any form. now Java will enable and you will be able to see the console messages. In a few moments(depending on your system speed), the forms should be displayed.
If this doesn't fix the issue, then copy paste the entire console message and post a question in this forum for help. Enjoy your EBS!!

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Oracle 10.2.0.3 Databases - Restore to New Server

We will soon be replacing an old server with a new server and I need to restore all Oracle 10.2.0.3 databases to the new server
and ensure Oracle functionality/connectivity with all databases.
I am in the process of testing and need advice and hopefully a 'Step by Step' process I can follow.
I am a systems admin - not an Oracle db admin - so please explain details of any commands I may have to run.
I have already tested once:
ran command prompt: sqplus / as sysdba
SQL>shutdown immediate;
Stopped all Oracle services:
Oracle Database
Oracle Listener
Oracle DBConsole
Installed Oracle 10.2.0.3 on new server
Ensured that the SID and all other Oracle services information matched the old server during installation on the new server.
Stopped all Oracle services on the new server (used the steps above).
Backed-up and test restored to new server.
Enterprise Manager shows: Listener Up Database Instance Down Agent Down
Any help would be appreciated

It would be good to know your operation system. I hope both new and old match or similar.
You can use RMAN to dumplicate you DB so you can follow [Creating a Duplicate Database on a New Host. Doc ID: 388431.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=388431.1]
but a simple file system copy based manual duplication is also possible if new and old OS system is similar...

Oracle doesn't started when When I reboot the Server.

Dear All,
I have installed 10g using ASM and Oracle-managed files on a Windows Server 2003 (Second Edition , Service Pack 1 ) system . I have put no data in, and I take the defaults. It works fine - until the system reboots.
Oracle doesn't started when When I reboot the Server.
Here is what I get from sqlplus, following the instructions to start an ASM instance:
SQL*Plus: Release 10.1.0.2.0 - Production on Mon Oct 11 10:47:53 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA0/10g/spfile10g.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA0/10g/spfile10g.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
Thanks for helping,
Debraj Banerjee

It look like your ASM instance is not yet started. Try the following:
$>export ORACLE_SID=+ASM (set ORACLE_SID=+ASM if you are on Windows)
$>sqlplus /nolog
SQL>startupThen you start up your other instance.

Oracle 8.0.3 in a Netware 5.0 Server!

We have a netware 5.0 with 30 licenses.
We have Oracle 8.0.3 that it cames with novell server.
First of all where can i see information about oracle to netware servers?
We are trying to develop a program in VB 6 (is ready) that it comunicates with oracle server trought odbc connection.
We have the next problems:
- The oracle database have 5 user licenses, with 3 users working, there are no problems, but when the 4º user login into the oracle database (load the program in vb6 and begin work on it), all the users begin to receive the ask to login into database oracle (user/password/feiras.world). If in this situation 1 of 4 user goes out of the aplicattion all is fine!
- If we have a 5 user prodution oracle database, why can we only work with 3 licenses?
- The second problem is the program doing some search in database takes netware server almost to 100% of Utilization, and we wait a lot by the information, is this normal?
- The third situation, is that, the program works very slowly at getting data from da oracle database. Is this because we use VB6 and ODBC? Are some away of we improve performance?
Urgent
Obrigado,
Paulo J. Sousa

David Janello (guest) wrote:
: I need to download the server patches for Oracle 8.0.3, also
the
: patches for Net8 and the TCP/IP adapter.
: My Platform/OS is DEC Alpha NT v. 4.0.
: Where are these located on the Oracle site, I did a number of
: searches but did not find them.
: Thanks,
: -David Janello
bad news ...
oracle 8.0.3 went out of support in march , 1999.
so no patches or downloads will normally be available after this
occurs.
On Windows NT platforms, you will need to upgrade to :
8.0.4,
8.0.5, or
8.1.5
--- or ---
wait for oracle 8i release 2 just announced at open world.
null

Oracle Database 9.2.0.1 on Window 8 server machine

Hi guys!
I have problem with installation of Oracle Database 9.2.0.1 on Window 8 server machine. I need installation Guide of Oracle Database 9.2.0.1 for "Windows 8" server Machine.
anyone can help me how can i install?

visit http://tahiti.oracle.com/

Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER -PATCHES

HI
Can some one help me out,
is Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER , is having some patch
set to work on Developer2000,
if so,please let me know where in we get the same
tks
narayana rao

hi,
I am trying to install oracle 9i rel2 on red hat adv server 2.1
Installation and Linking looks fine and during configuration ,
the database configuration assistant fails with 'End of Communication channel'.
This makes the software not usable as we get the same error while trying to connect to the database too..
any ideas?Check the "Oracle Installation Errors" section at
http://www.puschitz.com/OracleOnLinux.shtml
In this section I explain what I did about the
"end-of-file on communication channel" error
on RH AS.
Any feedback on this problem and solution is appreciated.
Werner

Moving oracle 9i database from windows 2000 to windows 2003 server

hi everybody,
plz provide me a solution how to move oracle 9i database from windows 2000 server to windows 2003 server with step by step and also with commands plz as i am very new to oracle
thanks in advance
suresh

Install 9i on windows 2003 server and patch to the same level as the Oracle on Windows 2k
Shutdown and make a cold backup of your old database. That includes datafiles, controlfiles, redo files, init file (spfile)
Copy and put these files to the exact same directory structure/location, for example if old file is under D:\oradata\mysid\ then the file on new file should be under same directory. (If you are using Network Storage that make things easier, just mapping to the same drive letter.)
Also make sure archive log dest and all dump dest directories are created. You don't have to copy all old logs and dump files over.
Use oradim to create a new service for the database instance
http://www.psoug.org/reference/oradim.html
Set proper ORACLE_HOME, ORACLE_SID envionment varibles
Run netca to configure listener, actually copy listener.ora and tnsnames.ora to $ORACLE_HOME\network\admin will do
Try to start the database

Moving a 32 bit Oracle 9i database to 64 bit on a different server

Hello,
We have a 24 GB database with Oracle 9.2.0.7 (32 bit). As the hardware of this server is getting obsolete, it is planned to move this instance to another server, which has 64 bit Oracle software of same version (9.2.0.7). In this scenario what is the best way to move the instance?
Is it only the full export from 32 bit server and import into 64 bit server(after creating the instance there)?
Since this is a 24 GB database, and target server is 8 gb of ram, any pointers on how long the import process can take?
There is a documentation to change word size, I can run utlirp.sql as suggested here:
http://www.orafaq.com/forum/?t=rview&goto=258668#msg_258668
But I have some doubts as I mentioned in that post. Can you please share your suggestions?
Thanks,
Nirav

Hi
Is there some document or steps to follow when creating the instance on the new server The database move is easy, and here is one way to move the schema, fast:
http://www.dba-oracle.com/oracle_tips_db_copy.htm
And then, you just run the script to change the wordsize for 64-bit:
Also, after your migration, watch out for common performance issues:
http://www.dba-oracle.com/t_bad_poor_performance_upgrade_migration_32_64_bit.htm
Also, note that Oracle has changed the optimizer costing model from "IO" to CPU" in 10g, and shops that combine an upgrade to 64-bit servers with a 10g migration may want to look at changing the new default for _optimizer_cost_model.
Going 64-bit means that you can now allocate very large RAM data buffers and increase your shared_pool_size above two gigabytes. However, it is important to remember that there are downsides to having a super-large db_cache_size. While direct access to data is done with hashing, there are times when the database must examine all of the blocks in the RAM cache. These types of database may not always benefit from an upgrade to a 64 bit server:
Systems with high Invalidations: Whenever a program issues a truncated table, uses temporary tables, or runs a large data purge, Oracle must sweep all of the blocks in the db_cache_size to remove dirty blocks. This can cause excessive overhead for system with a db_cache_size greater than 10 gigabytes.
High Update Systems: The database writer (DBWR) process must sweep all of the blocks in db_cache_size when performing an asynchronous write. Having a huge db_cache_size can cause excessive work for the database writer. Some shops dedicate a separate, smaller data buffer (of a different blocksize) for high-update objects.
RAC systems: Oracle RAC and Grid does not perform optimally with super-large data buffer RAM, as available in 64-bit systems. You may experience high cross-instance calls when using a large db_cache_size in multiple RAC instances. This inter-instance "pinging" can cause excessive overhead, and that is why RAC DBA's try to segregate RAC instances to access specific areas of the database. This is why Oracle 10g grid server blades generally contain only 4-gig RAM.
Hope this helps. . .
Don Burleson
Oracle Press author
Author of “Oracle Tuning: The Definitive Reference”
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Oracle Hyperion EPM 11.1.2 Installation on Linux Server Issue

Hi All,
We were downloaded and extracted all zip files (placed in opt/hyperion) from edelivery.oracle.com on LINUX 64 - Server.Before start the installation created new user and assigned to particular group.We are unable to point out the new location for installation, and tried in both GUI and silent installation. In GUI mode the "Browse" option is not highlighted for selecting a new location. It is giving default location eg: some other directory opt/epm.
After finally we found some one already installed EPM 11.1.2 partially in some other directory. But Users are different and Groups (the both users) are same for this installation.
The following error occurred "An existing Middle ware location has been detected .The default location is /opt/epm ".Even we are not able to change the location.
My issue is why it is pointing to older location after deleting all related hyperion folders in /opt/epm.But Seems OraInventory folder files and some files pointing to older location.(We haven't clean that folders).Can i delete those folders as well?
Any inputs would be really appreciated.
Thanks in advance

RahulS wrote:
hi...
Browse button was nt higihlighted coz EPM installer must hv found something frm previous installation.
Now jst delete Oracle folder where u hv installed EPM 11.1.2, delete EPM related things from env nd user profile, nd re start installing.
Cheers...!!!Is your keyboard broke?
Cheers
John
http://john-goodwin.blogspot.com/

Migrating Oracle forms and reports from 6i to 10g Application server on Uni

HI Guys,
We are migrating from Oracle forms and reports 6i to 10g.
We will be having application server on Unix box.
I understand following will be the changes i will have to do in this respect -
1. Fonts are to be revisited only Java fonts are supported.
2. Obsolete items, function calls, triggers are to be removed.
My question is since this application can be cross platform application,
Can anyone provide me with changes that I will have to do with configuration files like -
1. Formsweb.cfg,
2. forms.conf
3. default.env
4. registry.dat
Keeping in mind that the application server will be on unix box.
Thanks,
Av.

Java fonts are only supported for the Forms version.
You can use your own fonts for Reports however, there is some legwork to do this. I know because I just went through it.
If you will only being using the PDF output (which for me replaced the Preview mode that existed in 6i), then you have to install the TTF for the missing font, an AFM (use the ttf2pt1 utility to generate the AFM file, but make sure you remove the AFM extension when moving it to Unix). You'll want to use the PDF Subset in the uifont.ali (which exists under the ORACLE_HOME/guicommon/tk/admin directory and add the line underneath the PDF Subset "Font Family Name"="TTF Font Name" The font family name is found when you open the AFM file in textpad or wordpad for the font you generated. This is what you enter. The TTF Font Name is the name the TTF font. You'll have to restart Reports Server after this.
If printing to the printer directly is an option you must have, I will tell you it does not work in Linux right now. You can print to the printer but if the font doesn't exist on the internal memory of the printer, it won't work. There are 3rd party utilities like ORARRP and PDFPrint that can take care of this but, each has its own limitations. The one thing I found with ORARRP is if you generate a Report with an RRPA file extension and open it on Windows, it works great, the printer dialog comes up asking you what printer you want to print too. However, if you call this in Linux/Unix with the filename, it brings it up in the web browser but doesn't prompt you for your printer to print too automatically. So, for me, it's a show stopper. My only other option is to install the fonts on the printer that are missing.
As for the files you want to change, you'll obviously have to make changes to the formsweb.cfg, default.env, forms.conf. I have to modify the reports.sh for some PL/SQL attached libraries to make sure it picks them up. I did have to modify Registry.dat.
There is alot of work but mainly forms wasn't too bad, unless you had fonts that weren't supported. Usually there is another font that you can use to replace the old one but you have to know which fonts exists on the server and try all the keys on the keyboard to find the corresponding keystroke.
Hope this helps.
Chris

Tracking oracle database activities in security/system logs of windows server

Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
dhomya

Hi Dhomya,
I am not familiar with Oracle database, though you may try to enable file system auditing:
Audit object access
https://technet.microsoft.com/en-us/library/cc776774(v=ws.10).aspx
Apply or modify auditing policy settings for an object using Group Policy
https://technet.microsoft.com/en-us/library/cc757864(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

Hi,
I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
ORA-12546: TNS: Permission Denied.
Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
Thanks in advance,
-Sandeep

I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
Check the support matrix and metalink and see if you can install a supported product such as 10.2.

Oracle VM 3.1.1 on HP DL785 G6 server

Similar Messages

Maybe you are looking for