Oracle VM 3.1.1 - use local sas on HP DL-580 G5 server

Hi,
I have next question:
I want to now if I can use local sas disk as local repositories on HP DL-580 server ?
The server use this controller: Smart Array P400i Controller.

According to HP it should be fully supported.
http://h18004.www1.hp.com/products/servers/linux/hplinuxcert-oracle.html
"HP Tested: Either the OS or hypervisor was successfully installed on the server"
No particular version is specified, however.
With the tension between Oracle and HP lately - it's possible HP drivers were pulled from the latest release - in which case you will have to acquire the correct drivers from HP and install with your host OS installation.
Did some searching on the forums here and turned up nothing specific to your case.
Since I do not have any related hardware in my possession I cannot comment any further.

Similar Messages

  • Is telnet use local tnsnames.ora?

    I was suprise that when the local tnsnames.ora of client was not correct,sqlplus at telnet can't connect to server,and when the file was modify,I can use sqlplus connect to oracle through telnet.
    is telnet use local tnsnames.ora?

    This is simply impossible.

  • The OraOledb.Oracle is not registered on the local machine.

    Hi Everyone,
    I am having Windows XP operating system with Service pack 2 on my computer. I also using Microsoft.Net 2003 & Oracle 9.x for creating a client-server Application. I installed the Oracle provider from OraWin9204.exe which i was downloaded from the Oracle's site. But I am getting the above mentioned problem "The OraOledb.Oracle is not registered on the local machine", while i m executing the open method of the Connection object of ADO.NET. I also checked the permission on ora92 (ORACLE HOME DIRECTORY) folder and gave full control to my username. But the problem remains same.
    Can anybody have any idea? Please help me on [email protected]
    Thanx
    Rahul Ratnaker

    make manual registration of following file.
    [oracle_Home]\ora92\bin\OraOLEDB.dll
    Enjoy
    Rahul Ratnaker

  • How connect to oracle RAC via the RSG using port forwarding

    Hi all,
    I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
    on command line i sue to connect :
    sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'
    but when using port forwarding i forward the port 1521 to a local port and make ssh to the DB node ( as normal with other nodes but not RAC) but it never work with me for this situation
    can any one give me a help ifthere is any changes should be done on the server side , or if any one faced such a problem and found a solution
    Thanks,
    Prathap.

    782011 wrote:
    I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
    on command line i sue to connect :
    sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'Not exactly sure what you are attempting, but if you doing port forwarding via ssh, the basic approach is as follows:
    Step 1
    Create a ssh tunnel from local machine to remote db server. Forward any local port (should not be a well known port or a port in the private/dynamic port range) to connect to the database server's listener port. If the ssh tunnel is into the db server itself, the connection (port forwarding) can be on localhost (as the Listener should be listening on it). Alternatively use a public IP of that db server.
    Example (using OpenSSH on Ubuntu 9.4):
    Local server port 1527 tunneled to port 1521 on database server 192.168.0.100 using o/s account johnd (we connect to port 1521 on db server via 127.0.0.1):
    ssh -X -f -N -o ServerAliveInterval=3 -L 1527:127.0.0.1:1521 [email protected]
    Step 2
    Run sqlplus and connect to the local fowarded port on localhost, using the applicable connection settings (e.g SID/Service Name, etc).
    sqlplus scott/tiger@"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1527)) (CONNECT_DATA=(SID=orcl) (SERVER=dedicated)))"Note that the Listener must not hand our connection off - as the case would be when using RAC for example and connecting via a Service Name and not a SID. We need the Listener that accepts our connection to immediately hand us over to the database instance (via either a dedicated server or a shared server dispatcher process).

  • Oracle JDBC driver problem for Canada locale

    Hi, there:
    I have problem on Oracle JDBC thin driver with Canada locale on client side:
    I'm using Oracle9i thin jdbc driver, the nls parameters in oracle database is:
    NLS_LANGUAGE: AMERICAN
    NLS_TERRITORY: AMERICA
    NLS_NUMERIC_CHARACTERS : .,
    My java client side is running on Windows NT, which using jdbc thin driver to connect oracle database. If I set the locale in client side as "English(Canada)", it seems return me "French" number format, like ",45" (comma, instead of decimal point) for "0.45". However, If I set client side locale as "English(United States)", it returns me "0.45" as expected.
    So, my question: does Oracle JDBC driver always returns "French" number format evenif I set "English(Canada)" as locale? Because Canada have both English and French locale "French(Canada), and English(Canada)". How can I get "English" number format like "0.45" with "English(Canada)" locale setting?
    Really appreciated any reply, and thanks a lot in advance
    David

    Sounds like a question for Oracle Support to me.
    Anyway, the way to avoid the problem is to not ask Oracle to format numbers. Get the number directly (via ResultSet.getInt() or getDouble() or whatever) and ask Java to format it.

  • How can i convert oracle report in excel format using 8i

    hi,
    I want to convert oracle report in excel format using 6i reports. please give the solution with emp table.
    millons of thanks in advance.

    You'll have to use the destype DELIMITEDDATA to render your Report in CSV format. Then set the mime type to Excel. I don't know the exact syntax, so please do a search in metalink for "reports excel" for examples and more info.
    Regards,
    Martin Malmstrom

  • How to configure Oracle 10g Advanced Security to use SSL concurrently with

    How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
    In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
    We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
    Basically we want SSL with out authentication.
    Need your expert advice

    Read the documentation (I have given following links assuming you are running a 32 bit architecture)
    Server installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
    Client installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
    You can find the required books (if not using 32 bit architecture) from
    http://www.oracle.com/pls/db102/portal.portal_db?selected=3

  • Can an Oracle VM be converted for use in VMWare or VirtualBox?

    Does anyone know how to convert / export an Oracle VM for use in VMware Server or in VirtualBox? I've successfully converted VMware images to OVM and VirtualBox images to OVM, but I've not been able to figure out how to get an Oracle VM to convert for use in VMWare or in VirtualBox.
    -Dan
    Edited by: user723595 on Apr 16, 2010 4:10 PM

    The ovs-agent will recognize any strorage device on your VM server which:
    a) is unused and free of any partition, so basically a blank drive
    b) the drive must be recognized by the multipath daemon, so it must be present under /dev/mapper
    So basically, you can't throw in a big drive, partition it, install OVM on it and hope to use the remaining space for your storage pool, you will need the system to recognize at least two independent drives - how ever you going to achieve that is up to you, but the most easy way is to have indeed at least two separate drives installed.

  • Can I use iCloud as my library instead of using local storage?  Would I be able to synchronize the music on my phone? and make CDs out of the my music in the icloud using itunes?

    Can I use iCloud as my library instead of using local storage?  Would I be able to synchronize the music on my phone? and make CDs out of the my music in the icloud using itunes?

    Many thanks JEM24 for your help.  Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone  the actual cost of each additional  gigabyte of storage  to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

  • Problem using local variable in event loop

    I have a state machine from which I want to monitor various controls, including "Start" and "Stop" buttons.  Not every state needs to monitor the controls.  At present, most states run timed loops.  In the first state that reads the front panel, I have an Event structure (inside a While loop) that monitors the various controls' Change Value events.  For numeric controls, I update variables (in shift registers) as needed.  The "Start" button is used to end the While loop controlling the Event structure, allowing the State to exit to the next state.
    My problem comes in subsequent states that employ this same idea.  Here, I put a Local Variable bound to the Start button and use the same code, but it frequently happens that when I enter this particular state, I cannot "turn on" the control -- I push the button, but it stays off.  Curiously, if it was On when I enter, I can turn it off, but then I'm stuck not being able to turn it on.
    I mocked up a very simply routine that illustrates this.  There are two sequences (corresponding to the two states).  Both use an Event loop with a local variable bound to my Stop button (really this is an LED control with custom colors).  I've deliberately moved the "initialization" (the declaration of the control in the block diagram) out of the Event loops -- putting it inside the first loop modifies the behavior in another strange way.
    Here's my thinking on how I would expect this to work:  The code outside Event Loop 1 should have little effect.  Assume the Stop button is initially Off.  You will "sit" in Event Loop 1 until you push the Stop button, changing its value to True; this value will be passed out of the Event case and cause the first While loop to exit.  You now enter the second sequence.  As I understand the Exit tunnel, it defaults to "False", so I'd expect to stay in the second Event loop until I turn the Stop button from On to Off, which will pass out a False, and keep me in the While for one more button push.  However, this doesn't happen -- I immediately exit, as though the "True" value of the Stop local variable is being seen and recognized by the Event loop (even though it hasn't changed, at least not in the context of this second loop).
    An even more curious thing occurs if I start this routine with the Stop button turned on.  Now I start in my Event loop waiting for a change, but this time the change will be from On to Off, which won't cause an exit from the frame.  This will be reflected by having the While loop count increment.  We should now be in the state of the example above, i.e. in an Event loop waiting for the control to be pushed again, and turned On.  However, clicking the control has no effect -- I cannot get it to "turn on".
    Where am I going astray in my thinking?  What is it about this method of doing things that violates the Labview paradigm?  As far as I can tell, what I'm doing is "legal", and I don't see the flaw in my reasoning, above (of course not -- otherwise I'd have fixed it myself!).  Note that because I'm using local variables inside Event loops (and I'm doing this because there are two places in my code where I want to do such testing), the Stop control is not latching (as required).  Is there something that gets triggered/set when one reads a latched control?  Do I need to do this "manually" using my local variable?
    I'll try to attach the simple VI that illustrates this behavior.
    Bob Schor
    Attachments:
    Simple Stop Conundrum.vi ‏14 KB

    altenbach wrote:
    Ravens Fan wrote:
    NEVER have multiple event structures that share the same events. 
    Actually, that's OK.  NOT OK is having multiple event structures in the same sequence structure.
    See also: http://forums.ni.com/ni/board/message?board.id=170&message.id=278981#M278981
    That's interesting.  I had always thought I read more messages discouraging such a thing rather than saying it was okay.  Your link lead me to another thread with this message. http://forums.ni.com/ni/board/message?board.id=170&message.id=245793#M245793.  Now that thread was mainly concentrating on registered user events which would be a different, but related animal. 
    So if you have 2 event structures they each have their own event queue?  So if you have a common event, one structure pulls it off its event queue and it does not affect the other structure's event queue?  I guess the inherent problem with this particular VI was that the second event structure locked the front panel.  Since the code never got to that 2nd event structure because the  first loop never stopped because the change was from true to false.  After reading your post and the others, I did some experimentation and turned off the Lock front panel on the 2nd structure, and that prevented the lockup of the program.
    Overall, the example VI still shows problems with the architecture and I think your answer should put the original poster on the right track.  I think as a rule I would probably never put the same event in multiple structures, I feel there are better ways to communicate the same event between different parts of a program,  but I learned something by reading your reply and about how the event structures work in the background.  Thanks.

  • ALV issue: when save list using Local File command will get run time error!

    help!!!!
    report list using ALV method when to save this list using Local File.
    i will get GETWA_NOT_ASSIGNED run time error information.
    how resolve it?
    source code :
    REPORT   ZIFT0103.
    TABLES :  MARA,MARC,CDHDR,CDPOS,MAKT.
    ******DEVK909212****************
    ****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
    DATA: FTP_WERKS LIKE MARC-WERKS.
    ********定义一个RANGE用来抓取MARC的信息
    RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
    ********定义一个INTERNAL TABLE 来抓取MARC 的信息
    DATA:BEGIN OF IT_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,
          WERKS LIKE MARC-WERKS,
          USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         FLAG_UI TYPE C,
         END OF IT_MARC.
    *******定义存放北京的数据的变量
    DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_BEIJING .
    ******定义福清的数据变量
    DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_FUQING .
    *******DEVK909212*****************
    DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
                  MATNR(25) ,
                  MAKTX(30) ,
           END OF FTP_ITEMDOC1 .
    DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
                  MATNR(25) ,
                  MATNR1(25) ,
                  MAKTX(30) ,
           END OF FTP_ITEMDOC .
    DATA: WA_ZMSGTA TYPE ZMSGTA ,
          l_ersda  like MARA-ERSDA .
    ***********DEVK909553********************
    ****用来决定执行FTP还是显示LIST**********
    DATA:g_tcode_flag.
    ***********DEVK909553********************
    Error message process ******************************
    DEFINE EXPLAIN_MSG.
       break soe_richard.
      CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
        EXPORTING
          ID                = &1   "SY-MSGID
          NUMBER            = &2   "SY-MSGNO
          LANGUAGE          = SY-LANGU
          TEXTFORMAT        = &3
          LINKPATTERN       =
          MESSAGE_V1        = &4                                "SY-MSGV1
          MESSAGE_V2        = &5                                "SY-MSGV2
          MESSAGE_V3        = &6                                "SY-MSGV3
          MESSAGE_V4        = &7                                "SY-MSGV4
        IMPORTING
          MESSAGE           = &8   "WA_ZMSGTA-MSE1
          RETURN            =
        TABLES
          TEXT              =
    END-OF-DEFINITION.
    DEFINE ERROR_MSG_UPDATA.
      CALL FUNCTION 'ZINSERT_MSG'  "IN UPDATE TASK
        EXPORTING
          XZMSGTA      = &1    "WA_ZMSGTA
        EXCEPTIONS
          UPDATE_ERROR = 1
          OTHERS       = 2.
    END-OF-DEFINITION.
    IF SY-TCODE = 'ZIFT103' .
      g_tcode_flag = 'L'.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          PERCENTAGE = 0
          TEXT       = '请耐心等候,系统正在抓数据'.
    ENDIF.
    l_ersda = sy-datum - 1 .  "取前一天产生的物料号码。
    DATA:BEGIN OF it_change OCCURS 0,
         OBJECTID TYPE CDHDR-OBJECTID,
         USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         TABKEY   TYPE CDPOS-TABKEY,
         END OF it_change.
    DATA:BEGIN OF it_cDhdr OCCURS 0,
         OBJECTID type CDHDR-OBJECTID,
         CHANGENR TYPE CDHDR-CHANGENR,
         USERNAME TYPE CDHDR-USERNAME,
         UDATE    TYPE CDHDR-UDATE,
         END OF it_cdhdr.
    DATA:search_len TYPE I.
    DATA:BEGIN of it_insert OCCURS 0,
         MATNR TYPE MARA-MATNR,
         WERKS TYPE MARC-WERKS,
         END OF it_insert.
    DATA:BEGIN OF it_MAKT OCCURS 0,
         MATNR TYPE MAKT-MATNR,
         MAKTX TYPE MAKT-MAKTX,
         END OF it_makt.
    DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
    DATA:BEGIN OF IT_OUT OCCURS 0,
         MATNR TYPE MARA-MATNR,
         WERKS TYPE MARC-WERKS,
         MTART TYPE MARA-MTART,
         MEINS TYPE MARA-MEINS,
         MATKL TYPE MARA-MATKL,
         MAKTX TYPE MAKT-MAKTX,
         PSTAT TYPE MARA-PSTAT,
         BRGEW TYPE MARA-BRGEW,
         NTGEW TYPE MARA-NTGEW,
         GEWEI TYPE MARA-GEWEI,
         FERTH TYPE MARA-FERTH,
         KZUMW TYPE MARA-KZUMW,
         ERNAM TYPE MARA-ERNAM,
         ERSDA TYPE MARA-ERSDA,
         END OF IT_OUT.
    *-- DECLARE DATA FOR ALV
    TYPE-POOLS: slis.
    DATA  : g_variant LIKE disvariant,
            g_save(1) TYPE c,
            g_exit(1) TYPE c,
            gx_variant LIKE disvariant.
    DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
          gt_events   TYPE slis_t_event,
          gt_list_top_of_page TYPE slis_t_listheader,
          gs_print TYPE slis_print_alv,
          gs_layout         TYPE slis_layout_alv .
    ******只能抓出系统有做更改的数据***************
    ******而第一次INSERT MARA的数据抓不出来********
    START-OF-SELECTION.
    SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
    INTO TABLE it_change
    FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
         AOBJECTCLAS = BOBJECTCLAS AND
         AOBJECTID   = BOBJECTID   AND
         ACHANGENR   = BCHANGENR )
    WHERE A~OBJECTCLAS = 'MATERIAL'
    AND   A~UDATE = l_ersda
    AND   B~TABNAME = 'MARC'
    AND   B~CHNGIND = 'I'.
    LOOP AT it_change.
       search_len = STRLEN( it_change-TABKEY ).
       search_len = search_len - 4.
       IF search_len > 0.
         IT_MARC-WERKS = it_change-TABKEY+search_len(4).
       ENDIF.
       IT_MARC-MATNR = it_change-objectid+0(18).
       IT_MARC-USERNAME = it_change-username.
       IT_MARC-UDATE    = It_change-udate.
       IT_MARC-FLAG_UI  = 'U'.
       APPEND IT_MARC.
       CLEAR IT_MARC.
       CLEAR R_MATNR.
       R_MATNR-SIGN = 'I'.
       R_MATNR-OPTION = 'EQ'.
       R_MATNR-LOW = IT_MARC-MATNR.
       APPEND R_MATNR.
    ENDLOOP.
    ****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
      SELECT OBJECTID CHANGENR USERNAME UDATE
      INTO TABLE it_cdhdr
      FROM CDHDR
      WHERE OBJECTCLAS = 'MATERIAL'
      AND   UDATE = l_ersda.
    AND   TCODE = 'MM02'.
      LOOP AT IT_cdhdr.
        SELECT * FROM CDPOS
        WHERE OBJECTCLAS = 'MATERIAL'
        AND   OBJECTID  = IT_CDHDR-OBJECTID
        AND   CHANGENR  = IT_CDHDR-CHANGENR
        AND   TABNAME   = 'MARC'
        AND   CHNGIND = 'I'.
          search_len = STRLEN( CDPOS-TABKEY ).
          search_len = search_len - 4.
          IF search_len > 0.
            IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
          ENDIF.
          IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
          IT_MARC-USERNAME = IT_cdhdr-username.
          IT_MARC-UDATE    = IT_cdhdr-udate.
          IT_MARC-FLAG_UI  = 'U'.
          APPEND IT_MARC.
         CLEAR IT_MARC.
          CLEAR R_MATNR.
          R_MATNR-SIGN = 'I'.
          R_MATNR-OPTION = 'EQ'.
          R_MATNR-LOW = IT_MARC-MATNR.
          APPEND R_MATNR.
          CLEAR IT_MARC.
        ENDSELECT.
      ENDLOOP.
      IF g_tcode_flag = 'L'.
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
          EXPORTING
            PERCENTAGE = 20
            TEXT       = '处理好当天CHANGE的数据'.
      ENDIF.
    *******抓当天做了INSERT的数据*************
    *******不需要***********************
    SELECT BMATNR BWERKS INTO TABLE IT_INSERT
    FROM MARC AS B JOIN MARA AS A
    ON   AMATNR = BMATNR
    WHERE A~ERSDA = l_ersda.
    LOOP AT IT_INSERT.
       IT_MARC-MATNR = IT_INSERT-MATNR.
       IT_MARC-WERKS = IT_INSERT-WERKS.
       IT_MARC-FLAG_UI = 'I'.
       APPEND IT_MARC.
       CLEAR IT_MARC.
       CLEAR R_MATNR.
       R_MATNR-SIGN = 'I'.
       R_MATNR-OPTION = 'EQ'.
       R_MATNR-LOW = IT_MARC-MATNR.
       APPEND R_MATNR.
    ENDLOOP.
    IF g_tcode_flag = 'L'.
       CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
           PERCENTAGE = 40
           TEXT       = '处理好当天INSERT的数据'.
    ENDIF.
      IF g_tcode_flag = 'L'.
        PERFORM get_MAKTX.
        PERFORM get_mara.
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
          EXPORTING
            PERCENTAGE = 100
            TEXT       = '处理好数据,并开始显示数据'.
        PERFORM do_data.
        PERFORM display_alv.
      ELSE.
        PERFORM get_MAKTX.
        PERFORM do_ftp.
      ENDIF.
    *&      Form  get_marktx
          text
    FORM get_maktx.
      SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
      WHERE MATNR IN R_MATNR AND SPRAS = '1'.
    ENDFORM.                    "get_marktx
    *&      Form  get_mara
          text
    FORM get_mara.
      SELECT * INTO TABLE it_mara FROM MARA
      WHERE MATNR IN R_MATNR.
    ENDFORM.                    "get_mara
    *&      Form  do_data
          text
    FORM do_data.
      SORT IT_MARC BY MATNR WERKS.
      DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
      LOOP AT IT_MARC.
        CLEAR IT_MAKT.
        CLEAR IT_MARA.
        READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
        READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
        MOVE-CORRESPONDING IT_MARA TO IT_OUT.
        IT_OUT-MAKTX = IT_MAKT-MAKTX.
        IT_OUT-WERKS = IT_MARC-WERKS.
        IF IT_MARC-FLAG_UI = 'U'.
          IT_OUT-ERNAM = IT_MARC-USERNAME.
        ENDIF.
        APPEND IT_OUT.
        CLEAR IT_OUT.
      ENDLOOP.
    ENDFORM.                    "do_data
    *SELECT AMATNR BMAKTX INTO CORRESPONDING
    *FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
    *ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
    *AND B~SPRAS = '1' . "代表为中文说明。
    APPEND FTP_ITEMDOC1.
    *******DEVK909212****************
    *******添加RANGE*****************
    CLEAR R_MATNR.
    R_MATNR-SIGN = 'I'.
    R_MATNR-OPTION = 'EQ'.
    R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
    APPEND R_MATNR.
    CLEAR  FTP_ITEMDOC1.
    *******DEVK909212****************
    *ENDSELECT.
    *******DEVK909212****************
    ****get WERKS information from MARC*******
    *SELECT MATNR WERKS INTO TABLE IT_MARC
    *FROM MARC
    *WHERE MATNR IN R_MATNR.
    *******DEVK909212****************
    ******DEVK909212****************
    **MARK**************************
    *LOOP AT FTP_ITEMDOC1 .
    MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
    APPEND FTP_ITEMDOC.
    CLEAR FTP_ITEMDOC.
    *ENDLOOP.
    ******DEVK909212****************
    ******DEVK909212***********************************
    **根据IT_MARC中信息，往北京和福清的TABLE写数据*****
    FORM do_ftp.
      LOOP AT IT_MARC.
    ***福清的
        IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
           OR IT_MARC-WERKS = '1023' .
         READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
         MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
          CLEAR IT_MAKT.
          READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
          MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
             IT_MARC-MATNR TO FTP_FUQING-MATNR1,
             IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
          APPEND FTP_FUQING.
          CLEAR FTP_FUQING.
        ENDIF.
    ***北京的
        IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
         READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
         MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
            FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
            FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
          CLEAR IT_MAKT.
          READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
          MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
                 IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
                 IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
          APPEND FTP_BEIJING.
          CLEAR FTP_BEIJING.
        ENDIF.
      ENDLOOP.
    ****清楚重复的数据**********
      SORT FTP_FUQING.
      DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
      SORT FTP_BEIJING.
      DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
    ***传送数据********
      REFRESH FTP_ITEMDOC.
      FTP_ITEMDOC[] = FTP_FUQING[].
      FTP_WERKS = '1010'.
      PERFORM ftp_work.
      REFRESH FTP_ITEMDOC.
      FTP_ITEMDOC[] = FTP_BEIJING[].
      FTP_WERKS = '1041'.
      PERFORM ftp_work.
    ******DEVK909212***********************************
    ENDFORM.                    "do_ftp
    *&      Form  ftp_work
         把以前FTP的工作做一个FORM
    *******DEVK909212**************************
    FORM ftp_work.
    *******DEVK909212**************************
      CHECK FTP_ITEMDOC[] IS NOT INITIAL.
    FTP function *****************************************************
      DATA : HDL TYPE I,
             L_SLEN TYPE I ,
             ERROR,
             KEY TYPE I VALUE 26101957,
             DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
      DATA: FTP_RESULT TYPE TABLE OF TEXT.
      DATA: P_FILE TYPE RLGRAP-FILENAME.
      DATA: L_USER(16) TYPE C VALUE 'SFIS',
            L_PWD(16) TYPE C VALUE 'SFIS',
            L_HOST(16) TYPE C VALUE '172.16.31.17'.
    *******DEVK909212**************************
    *****根据不同的工厂来抓FTP的信息
      CALL FUNCTION 'Z_FTP_SFIS'
        EXPORTING
          BLART = 'S'
          WERKS = FTP_WERKS
        IMPORTING
          HOST  = L_HOST
          USER1 = L_USER
          PASS1 = L_PWD.
    *******DEVK909212**************************
      CONCATENATE l_ersda '.KP' INTO P_FILE.
      SET EXTENDED CHECK OFF.
      ERROR = 0.
      CHECK HDL IS INITIAL.
    Connect to server
      L_SLEN = STRLEN( L_PWD ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = L_PWD
          SOURCELEN   = L_SLEN
          KEY         = KEY
        IMPORTING
          DESTINATION = L_PWD.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
       EXPORTING
         TEXT = 'Connect to FTP Server'.
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          USER            = L_USER
          PASSWORD        = L_PWD
          HOST            = L_HOST
          RFC_DESTINATION = DEST
        IMPORTING
          HANDLE          = HDL
        EXCEPTIONS
          NOT_CONNECTED   = 1
          OTHERS          = 2.
      IF SY-SUBRC <> 0.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          HANDLE        = HDL
          COMMAND       = 'ascii'
        TABLES
          DATA          = FTP_RESULT
        EXCEPTIONS
          TCPIP_ERROR   = 1
          COMMAND_ERROR = 2
          DATA_ERROR    = 3.
      IF SY-SUBRC <> 0.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          HANDLE         = HDL
          FNAME          = P_FILE
          CHARACTER_MODE = 'X'
        TABLES
          TEXT           = FTP_ITEMDOC
        EXCEPTIONS
          TCPIP_ERROR    = 1
          COMMAND_ERROR  = 2
          DATA_ERROR     = 3
          OTHERS         = 4.
      IF SY-SUBRC <> 0.
        EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                    SY-MSGV4 WA_ZMSGTA-MSE1.
        MOVE: 'B' TO WA_ZMSGTA-BLART,
              l_ersda  TO WA_ZMSGTA-REFNUMBER,
              SY-MSGTY TO WA_ZMSGTA-MSGTY,
              'MARA' TO WA_ZMSGTA-TBMA_VAL.
        ERROR_MSG_UPDATA WA_ZMSGTA.
        EXIT.
      ENDIF.
    *******DEVK909212**************************
    *******CLOSE FTP******************
      CHECK NOT HDL IS INITIAL.
      CALL FUNCTION 'FTP_DISCONNECT'
        EXPORTING
          HANDLE = HDL.
      CALL FUNCTION 'RFC_CONNECTION_CLOSE'
        EXPORTING
          DESTINATION = DEST
        EXCEPTIONS
          OTHERS      = 1.
      CLEAR HDL.
    ENDFORM.                    "ftp_work
    *******DEVK909212**************************
    FORM DISPLAY_ALV .
    *-- PREPARE ALV DATA
      PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
      PERFORM COMMENT_BUILD  USING GT_LIST_TOP_OF_PAGE[].
    *-- LAYOUT SETTING
      PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
    *-- ALV DISPLAY
      PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
    ENDFORM.                    " display_alv
    *&      Form  eventtab_build
          text
         -->P_GT_EVENTS[]  text
    FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = PT_EVENTS.
      READ TABLE PT_EVENTS WITH KEY NAME =  SLIS_EV_TOP_OF_PAGE
                               INTO LS_EVENT.
      IF SY-SUBRC = 0.
        LS_EVENT-FORM = 'TOP_OF_PAGE'.
        MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
      ENDIF.
    ENDFORM.                    " eventtab_build
    *&      Form  comment_build
          text
         -->P_GT_LIST_TOP_OF_PAGE[]  text
    FORM COMMENT_BUILD  USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
      DATA: LS_LINE TYPE SLIS_LISTHEADER,
            L_DATE(30),
            l_v_BWKEY like T001W-BWKEY,  "Valuation area
            l_v_BUKRS like T001K-BUKRS.  "Firm/Company
    Listen&#57692;erschrift: Typ H
    CLEAR LS_LINE.
    LS_LINE-TYP  = 'H'.
    LS_LINE-KEY:  not used for this type
    select single BWKEY
       into l_v_BWKEY
       from t001w
       where WERKS IN s_WERKS.
    select single BUKRS
       into l_v_BUKRS
       from t001k
       where BWKEY = l_v_BWKEY.
    SELECT SINGLE butxt INTO LS_LINE-INFO
        FROM t001
       WHERE bukrs = l_v_BUKRS.
    APPEND LS_LINE TO PT_TOP_OF_PAGE.
    Kopfinfo: Typ S
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25253;&#34920;&#21517;&#31216;&#65306;'.
      LS_LINE-INFO = SY-TITLE.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25171;&#21360;&#26085;&#26399;&#65306;'.
      WRITE SY-DATUM TO LS_LINE-INFO.
    ls_line-info = sy-datum.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#25171;&#21360;&#26178;&#38291;&#65306;'.
      WRITE SY-UZEIT TO LS_LINE-INFO.
    ls_line-info = sy-uzeit.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'S'.
      LS_LINE-KEY  = '&#20351;&#29992;&#32773;&#65306;'.
      LS_LINE-INFO = SY-UNAME.
      APPEND LS_LINE TO PT_TOP_OF_PAGE.
    ENDFORM.                    " comment_build
    *&      Form  prepare_alv_field
          text
         -->P_GT_FIELDCAT[]  text
    FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE  SLIS_T_FIELDCAT_ALV.
      DATA: LS_LINE TYPE  SLIS_FIELDCAT_ALV.
    *-- DEFINE MARCO
      DEFINE APPEND_ALV_FIELD.
        CLEAR LS_LINE.
        LS_LINE-FIELDNAME = &1.
        LS_LINE-TABNAME = &2.
        LS_LINE-REPTEXT_DDIC = &3.
        LS_LINE-SELTEXT_L = &3.
        LS_LINE-SELTEXT_M = &3.
        LS_LINE-SELTEXT_S = &3.
        LS_LINE-QFIELDNAME = &4.
        LS_LINE-QTABNAME = &5.
        LS_LINE-NO_OUT    = &6.
        LS_LINE-NO_ZERO   = &7.
        LS_LINE-OUTPUTLEN = &8.
        APPEND LS_LINE TO P_FIELDCAT.
      END-OF-DEFINITION.
      APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '&#26009;&#21495;'
                      'O' 'X' ''.
      APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '&#24037;&#21378;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '&#29289;&#26009;&#32452;\&#20998;&#32676;&#30721;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '&#29289;&#26009;&#25551;&#36848;'
                        'O' 'X' ''.
      APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '&#32500;&#25252;&#29366;&#24577;'
                        'O' 'X' ''.
      APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '&#27611;&#37325;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '&#20928;&#37325;'
                       'O' 'X' ''.
      APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
                      'O' 'X' ''.
      APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '&#23545;&#22806;&#26426;&#31181;&#21517;'
                     'O' 'X' ''.
      APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '&#39640;&#20851;&#31246;&#26631;&#35782;'
                   'O' 'X' ''.
      APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '&#21019;&#24314;&#32773;'
                 'O' 'X' ''.
      APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '&#21019;&#24314;&#26085;&#26399;'
              'O' 'X' ''.
    ENDFORM.                    " prepare_alv_field
    *&      Form  call_reuse_alv_grid_display
          text
    -->  p1        text
    <--  p2        text
    FORM CALL_REUSE_ALV_GRID_DISPLAY .
      gs_layout-f2code              = 'DISPLAY'.
      gs_print-no_print_listinfos   = 'X'.
      gs_layout-colwidth_optimize   = 'X'.       "&#21015;&#23485;&#24230;&#33258;&#21160;&#26681;&#25454;&#20869;&#23481;&#20248;&#21270;
    gs_layout-f2code              = '&ETA'.    "double check&#24377;&#20986;&#35814;&#32454;&#20449;&#24687;
      gs_layout-zebra               = 'X'.       "&#28165;&#21333;&#26465;&#32441;&#26174;&#31034;
      gs_layout-no_vline            = ''.        "&#26159;&#21542;&#26174;&#31034;&#21015;&#38388;&#38548;&#32447;
      gs_layout-box_fieldname       = ''.        "&#26159;&#21542;&#26174;&#31034;checkbox
      gs_layout-confirmation_prompt = ''.        "&#25512;&#20986;&#28165;&#21333;&#26159;&#21542;&#25552;&#31034;
      gs_layout-detail_titlebar     = '&#35814;&#32454;&#20449;&#24687;'."&#35814;&#32454;&#28165;&#21333;&#30340;&#26631;&#39064;
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM                = SY-CPROG
          I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
         I_CALLBACK_PF_STATUS_SET          = 'ALV_PF_STATUS'
         I_CALLBACK_USER_COMMAND           = 'ALV_USER_COMMAND'
         I_CALLBACK_TOP_OF_PAGE            = GT_LIST_TOP_OF_PAGE[]
          IT_FIELDCAT                       = GT_FIELDCAT[]
          IT_EVENTS                         = GT_EVENTS[]
          I_STRUCTURE_NAME                  = 'IT_OUT'
          I_SAVE                            = 'A'
          IS_LAYOUT                         = GS_LAYOUT
          IS_PRINT                          = GS_PRINT
        TABLES
          T_OUTTAB                          = IT_OUT
        EXCEPTIONS
          PROGRAM_ERROR                     = 1
          OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " call_reuse_alv_grid_display
    *&      Form  PREPARE_ALV_FIELD
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
    ENDFORM.                    "TOP_OF_PAGE

    Hi,
    Please check your field catalog and refer field names once again.
    Check spelling, or Check strucutre properly.
    There are something wrong in your catalog definition
    aRs.

  • How to Reset Password of User while not connected to Domain using Local Admin Account

    How to Reset Password of User while not connected to the Domain using Local Admin Account
    (I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password. 
    In Local Admin Account :
    When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
    When I go to lusrmgr.msc, then users ; the local admin account will display only. 
    If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
    I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain.  I just want to help a user who calls in and forgets their password.

    Hello Keith,
    I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
    1. Create a local user account (not a domain user)
    2. Login with that local user account
    3. Connect to the VPN while logged in as a local user
    4. Log out of the local account and login with the domain credentials
    Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
    Thanking you in advance!

  • Help Installing Oracle 8.1.6 client using SMS

    Don't think I have the right topic here, but I'll post my request anyway...
    I am attempting to do a silent install of the Oracle 8.1.6 client using SMS and the .RSP files provided on the CD. So far not having much luck and was wondering if anyone here has done something similar and if so what methods you used.
    Thanks for any help you can provide!!!
    Wendi

    Check this link if your computer have a P4.
    http://support.intel.com/support/processors/pentium4/issues.htm
    Rename each copy of the SYMCJIT.DLL to SYMCJIT.OLD.
    Then your installation will start smoothly.
    Regards
    Vijayan.K

  • Java PI7.1 mapping and standalone NWDS debugging using local XML files

    >>which can be debugged in standalone NWDS using local files.
    yes its possible...u just have to add static void main (as sugested in the blog) ..
    Note: i dont have a system as of now..so i guess there can be some sysntax errors. Please check.
    create input xml file with name "input.xml" and place it under "D" drive (it can be any location)
    package prasad.NewAPI;
    import java.io.IOException;
    import java.io.InputStream;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import com.sap.aii.mapping.api.AbstractTransformation;
    import com.sap.aii.mapping.api.StreamTransformationException;
    import com.sap.aii.mapping.api.TransformationInput;
    import com.sap.aii.mapping.api.TransformationOutput;
    * @author Prasad Nemalikanti
    public class NewAPIJavaMapping extends AbstractTransformation {
    public static void main(String[] args) {
              try{
                   NewAPIJavaMapping javaMapping =new NewAPIJavaMapping();
                   FileInputStream in=new FileInputStream("D:\\input.xml");
                   FileOutputStream out=new FileOutputStream("D:\\output.xml");
                   javaMapping.execute(in,out);
                   catch(Exception e)
                   e.printStackTrace();
       String result="";
      /* The transform method which must be implemented */
      public void transform(TransformationInput in,TransformationOutput out) throws StreamTransformationException
        InputStream instream = in.getInputPayload().getInputStream();
      // String for constructing target message structure
        String fresult="<?xml version=\"1.0\" encoding=\"UTF-8\"?>";
        fresult = fresult.concat("<ns0:MT_Customer xmlns:ns0=\"urn:newapi-javamapping\">");
        try{
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            Document doc = builder.parse(instream);
            traversingXML(doc);
         catch(Exception e){}
    fresult = fresult.concat(result);
    fresult = fresult.concat("</ns0:MT_Customer>");
    try{
      out.getOutputPayload().getOutputStream().write(fresult.getBytes());
      /* assigning the created target message to "TransformationOutput"*/
       catch(IOException e1){}
    /*DOM Parser */
    public void traversingXML(Node node)
       NodeList children = node.getChildNodes();
       for(int i=0;i<children.getLength();i++)
         Node child = children.item(i);
         short childType = child.getNodeType();
         if(childType==Node.ELEMENT_NODE)
                  String nodeName=child.getNodeName();
                  String targetNodeName=null;
                  if(nodeName.equals("Users"))
                   targetNodeName="Customers";
                  else if(nodeName.equals("ID"))
                   targetNodeName="CustomerID";
                  else if(nodeName.equals("UserName"))
                   targetNodeName="Name";
                  else if(nodeName.equals("City"))
                    targetNodeName="City";
                  else if(nodeName.equals("State"))
                    targetNodeName="State";
                  else if(nodeName.equals("Country"))
                    targetNodeName="Country";
                 if(targetNodeName!=null)
                  result=result.concat("<"+targetNodeName+">");
       traversingXML(child);
       if(targetNodeName!=null)
       result=result.concat("</"+targetNodeName+">");
         else if(childType==Node.TEXT_NODE)
           String nodeValue = child.getNodeValue();
           result = result.concat(nodeValue);

    I have tested this and it is working..please chk the same
    package com.test;
    import java.io.IOException;
    import java.io.*;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    import com.sap.aii.mapping.api.AbstractTransformation;
    import com.sap.aii.mapping.api.StreamTransformationException;
    import com.sap.aii.mapping.api.TransformationInput;
    import com.sap.aii.mapping.api.TransformationOutput;
    public class JavaMapping extends AbstractTransformation {
           /* The transform method which must be implemented */
           public void transform(TransformationInput in,TransformationOutput out) throws StreamTransformationException
                this.execute(in.getInputPayload().getInputStream(),
                          out.getOutputPayload().getOutputStream());
           String result="";
           public void execute(InputStream in1, OutputStream out1)
          throws StreamTransformationException {
           // String for constructing target message structure
             String fresult="<?xml version=\"1.0\" encoding=\"UTF-8\"?>";
             fresult = fresult.concat("<ns0:MT_Customer xmlns:ns0=\"urn:newapi-javamapping\">");
             try{
                 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                 DocumentBuilder builder = factory.newDocumentBuilder();
                 Document doc = builder.parse(in1);
                 traversingXML(doc);
              catch(Exception e){}
          fresult = fresult.concat(result);
          fresult = fresult.concat("</ns0:MT_Customer>");
          try{
           out1.write(fresult.getBytes());
           /* assigning the created target message to "TransformationOutput"*/
            catch(IOException e1){}
          /*DOM Parser */
          public void traversingXML(Node node)
            NodeList children = node.getChildNodes();
            for(int i=0;i<children.getLength();i++)
              Node child = children.item(i);
              short childType = child.getNodeType();
              if(childType==Node.ELEMENT_NODE)
                       String nodeName=child.getNodeName();
                       String targetNodeName=null;
                       if(nodeName.equals("Users"))
                        targetNodeName="Customers";
                       else if(nodeName.equals("ID"))
                        targetNodeName="CustomerID";
                       else if(nodeName.equals("UserName"))
                        targetNodeName="Name";
                       else if(nodeName.equals("City"))
                         targetNodeName="City";
                       else if(nodeName.equals("State"))
                         targetNodeName="State";
                       else if(nodeName.equals("Country"))
                         targetNodeName="Country";
                       if(targetNodeName!=null)
                           result=result.concat("<"+targetNodeName+">");
            traversingXML(child);
            if(targetNodeName!=null)
                 result=result.concat("</"+targetNodeName+">");
              else if(childType==Node.TEXT_NODE)
                String nodeValue = child.getNodeValue();
                result = result.concat(nodeValue);
          public static void main(String[] args) {
                   try{
                        JavaMapping javaMapping =new JavaMapping();
                        FileInputStream in=new FileInputStream("D:\\Input.xml");
                        FileOutputStream out=new FileOutputStream("D:\\output.xml");
                        javaMapping.execute(in,out);
                        catch(Exception e)
                        e.printStackTrace();
    AM

  • Error message in trying to use local content in Adobe Community Help of Flash Builder

    Hi,
    I have set my Adobe Community Help application preferences of Flash Builder to 'Display local content only'.to Yes.
    I also disabled my internet connection to use local help content only.
    I get the following error message when trying to access any of the links from Help home page.
    To view the requested page, connect to the Internet or deselect "Display Local Help content only" in Preferences.
    I understand this is due to all the links point online HTTP urls.
    But why cannot the local help content be accessed when it is already downloaded to local and the 'Display local content only' option is set to Yes?
    This saves me a lot ot time otherwise using Adobe Community Help is painful even for a short period of time.
    Thanks,
    Ram Manoj Kongara.

    Hi, Ram -
    To help troubleshoot your problem, can you please do the following:
    In the Adobe Community Help application, go to Edit > Preferences.
    Select Local Content.
    The list of Help packages downloaded locally appear. Make sure that the status of every Help packages reads “Current”. If the status of a Help package reads  "Out-of-Date”, select that Help package, and click Update to download the latest Help package. Note that to do this, you have to be connected to the Internet. Once you fully download the Help packages to your desktop, you can access Help offline.
    One other thing that I would want you to check is the Adobe Community Help Client version that you are using. To check that, in the Adobe Community Help application, go to File > About Adobe Help. The build version should be 3.2.0.610.
    Let me know if this helps. If the issue still persists, we can investigate further.
    Thanks,
    Mallika Yelandur
    Technical writer, Adobe Flash Builder

Maybe you are looking for