Oracle VM Agent- Communication problem

Setup several VM Servers with the default settings out of the tutorial. Started and tested the agent. I get the following error when I use this command:
/opt/ovs-agent-2.2/utils/do_rpc.py https://admin:myserverpassword@myothermachineshostname:8899 echo hello
Socket error! code=104, msg=Connection reset by peer
Agents are running on both machines with synchronized usernames and passwords (different IP and hostnames of course). They can ping each other and everything on the network. Am I missing something obvious? I'm very new to this.

Found out our wonderful network admins put a firewall between each rack without telling us. Nice. Problem solved.

Similar Messages

OMS and Agent Communication Problem?

Hi
All
I have installed OMS that have version 10.2.0.2 on windows server and Agent with version 10.1.0.4 on AIX.
Is it any problem with version of OMS and Agent?
Thanks,
Vishal

Sorry To ask question again. but I have read 412431.1 doc and it satisfy requirement. After reading that I proceed with installation but somehow I m getting this output
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 290972
Parent Process ID : 458882
Agent URL : http://moe.wsi.:3938/emd/main
Started at : 2007-10-10 14:58:20
Started by user : oracle
Last Reload : 2007-10-10 14:58:20
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 2459
Size of XML files pending upload(MB) : 24.56
Available disk space on upload filesystem : 36.92%
Agent is Running and Ready
and Here it's says OMS version is unknown So I dont' know what's going on here.
Thanks,
Vishal

Oracle 10g agent installation problem -- please advice. Thanks.

I am trying to push an agent from a 32-bit CentOS 4.5 machine (where I successfully installed EM Grid Control with Database & that's working fine) to a 2-node Oracle 10g Clusterware/RAC, each machine has 64-bit CentOS 4.5. The questions I have are:
1. Is this mixture of 32-bit/64-bit possible?
2. When I am performing agent install, everything seemed to work (with manual root.sh execution provision) but at the end it's giving a message
"Failure Preinstall Script Not Executed, Install Is Failed. Run root.sh Is Not Executed, PostInstall Script Is Not Executed. Collection Logs Is Success."
And I don't see any agent* directory anywhere in any of the intended RAC Cluster nodes -- also, no error message log!
Clusterware/RAC versin: 10.2.0.3
EM Grid Control: 10.2.0.1
I have no clue what are the meaning of these!
Can somebody please tell me how to fix it (no upgrade suggestion please)?
Thanks in advance.

Hi,
I noticed that you'd like to install OEM Agent for 32bit on 64-bit machine.
Please look at the link below.
http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html#101x
Because OEM Agent on different platform are released separately.
eg.
For x86linux is Linux_Grid_Control_agent_download_10_2_0_2_0.zip
For Linux x86-64 is Linux_x86_64_Grid_Control_agent_download_10_2_0_2_0.zip
So could you please install OEM agent version for linx x86-64 ?
but I can not find OEM agent 10.2.0.1 version on link above. Do you have this version for 64-bit ?
Regards
Jason

Oracle 8i Intelligent Agent Service problem

Hi!
We successfully installed Oracle 8i (8.1.7 ee) on Intel P-IV (Xeon) server running Windows 2000 Advanced server (Service Pack 2). It was working properly until now. There was no problem in implementing the tricks useful in installation. After that, database service "OracleService<DBName>" presented problem by not automatically starting on computer startup but it was tamed by "Oradim" command added to startup folder.
All was going smoothly for about a month now but when I rebooted the server PC yesterday, the service "Oracle<HomeName>Agent" failed to start. Along with it the DataGatherer and TNSListener services also failed (Only db service OracleService<DBName> starts but very very slowly). The Windows Event Viewer descriped the problme for Agent service as ,"The Oracle<HomeName>Agent service terminated with the following error: %%3221356551 ". The Event ID is always 7023 for this error. The rest of services just don't give any error codes. It is also stated that nothing has been installed/Uninstalled on this PC in the last several days and no configration changes, in tnsnames.ora, sqlnet.ora, listener.ora, win registry has been made. The TCP/IP configration are intact and NTFS folder and file rights are properly defined.
Starting the service using "Net Start <service_name>" also failed with the message,"System error 7 has occured, Storage control blocks will be destroyed".
Searching online, I also performed some steps in correcting the problem like backup and delete all *.q, snmp_ro.ora, snmp_rw.ora, services.ora files. But to no help. The log files in Oracle_Home\network\logs also dont record the problem even after setting the trace level to Admin or 16. The Agent service simply refuses to start...
Reinstalling Oracle (over existing one, not first removing it altogether. We simply cann't do this now for data loss!!!) or just the Intelligent Agent itsself using univeral installer also fails at the end when it tries to start the intellegent Agent Service Oracle<HomeName>Agent. This time the error described is "O/S error in starting service".
Is this something to do with Xeon server coz the same Oracle 8i is installed much before than this on another P-IV server (not xeon) running the same Op system and it never presented us this problem todate. Its also worth mentioning that this problem occured before as well, on the second day we installed Oracle 8i the first time on Xeon. Since there was no data then, we simply removed oracle, cleared registry and started all over again BUT now it cann't be done.
Any help shall be highly appreciated.
With Regards, Rashid.
SeaBird505 at yahoo.com

Thanks for stopping by this thread. Problem has been resolved from another forum. Actually c:\oracle folder was accessable to administrator only, when I added 'Everyone' to the permission list as well, everything started fine. Allowing 'Everyone' to this folder is dangerous but its working for now :)

Oracle intelligent agent executable has encountered a problem and needs to

Hi All,
I am getting the following message after commence of OS (windows XP) on my LAPTOP.
"Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
Thanks in advance.

Hi Tapash,
You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
[OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
Regards
Peter

Oracle Intelligent Agent Exe encountered a problem and needed to close

Whenever the server is rebooted I get the error "Oracle Intelligent Agent Executable encountered a problem and needed to close". The agent won't start, and I found a work around that included deleting files from the network/agent and admin folders, then restarting the agent. This works, however the next time the server reboots I have to go through all of this again. Any ideas why this keeps occurring?
Also, what does this agent do? I've read through some documentation and can't quite tell if I actually need it started. Do you use this agent to only remotely monitor/administer through OEM? I'm really confused and could use some insight. All my process appear to be working fine.

Because of the error message I guess you are on Windows and database version is lower than 10g (by the way it's always a good idea to tell the environment, because Oracle runs on different platforms in different versions).
... 'encountered a problem and needed to close' is generic Windows error message with millions of possible reasons. So it's not possible to find remotely a solution. You are right, Intelligent Agent is a counterpart of OEM, but outside production environments rarely needed. I recommend you change the service properties from 'automatic' to 'manual' in control panel. So it does not start at reboot time.
Werner

Problem with Oracle Intelligent Agent 8.1.7 Users Guide PDF

I can't view of print certain pages (51,64,68) from the PDF version of the Oracle Intelligent Agent Release 8.1.7 User's Guide (http://downloadeast.oracle.com/docs/cd/A87860_01/doc/em.817/a85251.pdf). Have tried from several PCs and still get the error.

Hi Terry,
Please try the following URL:
http://download.oracle.com/docs/pdf/A85251_01.pdf. I believe this file should be fine.
Thankyou for highlighting the issue. We shall address it as soon as possible so that the file at the link you provided will be fixed.
Thanks and regards,
Les

Problem starting Oracle Intelligent Agent

Hi,
I have an Oracle Database 8i installed on Windows 2000 Server.
When I change my computer name, the Oracle Intelligent Agent could not be started.
What should I do to start the Oracle Intelligent Agent, if I want to use new computer name for my computer ?
Thanks in advanced.
Regards,
Eddy

Nick Yelevich (guest) wrote:
: Hkon W0ien (guest) wrote:
: : When starting oracle intelligent agent with the lsnrctl
: : dbsnmp_start command everything seems to be OK, but the
agent
: : dies immediately. The listener and everything else is
working
: : OK. The files snmp_ro.ora and snmp_rw.ora are created and as
: : fare as I know with the correct contents. I have turned on
: trace
: : and the last lines in the trace file dbsnmpw.trc shows the
: : following.
: : snmidlpi_PkgIndex: creating package index
: : -<ERROR>- snmidlpi_PkgIndex: failed to initialize init.tcl,
: : error 1
: : -<ERROR>- snmidlpi_PkgIndex: Tcl result:
: : I'm running RedHat 5.2 and Oracle v.8.0.5 production. All
files
: : in TNS_ADMIN are created using Oracle Net8 Assistant.
: : Any idea ?
: My situation is almost the same, but in my case snmp* files
had
: not been created. I have RedHat 5.2 and preproduction version
: Oracle 8.0.5.
I too can not start the intelligent agent. I am on Redhat 5.2
with the (I think production ) version of 8.0.5. Mine seems to
start up but the lsnrctl dbsnmp_status says that it is not
running. the dbsnmp_start seems to work but gives no feedback.
I get the error NMS-00315 in on of my log files. Any one have
any idea? I tried reinstalling the agent and infact the entire
oracle 8 server and got the same thing. thanks in advance.
Keir
null

Problems installing TCL 7.5 and Oracle Intelligent Agent

All
Has anyone had any success in installing TCL 7.5 and Oracle
Intelligent Agent? If so could you please provide a step by step
summary of the installation process. I keep getting error
messages when I run gmake for TCL. I commented out the lines
specified in the instructions. Does one have to use TCL 7.5? I
even tried to run version 8.2 and it restarted my machine while
running gmake test. Maybe it is how I commented the lines. I
used the # character to comment out the lines. Please help. IFve
got everything else running I can even use Net8 and SQL plus
from my Windows NT Client. I now need to be able to use Oracle
Enterprise Manager, which requires TCL 7.5 and Oracle
Intelligent Agent.
Many thanks
null

Thor Erik Jelstad (guest) wrote:
: I am using Oracle 8.0.5.0 and Red Hat 5.2/i386
: When I try to start Oracle Intelligent Agent I receive the
: following error message:
: "DBSNMP: error in loading shared libraries /usr/lib/libtcl.so:
: undefined symbol: stat"
: I have installed TCL package 8.0.3-20.
: Thor Erik Jelstad
I ran into "stat" symbol issues during some builds. I don't
recall if the subject program had to be built, but if so, adding
"-shared" to the cc (for linking) command helps. I think the make
variable is LDCCOM.
-Later.
null

Installing oracle management agent 12.1.0.2.0 in silent mode.

version: 12.1.0.2.0
platform: IBM Aix power systems 64bit
I installed the oracle management service along with the oracle management agent that comes along with the the first installation. I deinstalled the first installed OMA and tried to install it again using the silent install mode with the response file.
(oms host and the oma host are the same)
among the 3 modes of silent install described in the installation guide, i used agent deploy method.
Here are the steps i followed with the install
1. this the status of my OMS
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host        : chh-aix-beta
HTTP Console Port          : 7788
HTTPS Console Port         : 7799
HTTP Upload Port           : 4889
HTTPS Upload Port          : 1159
EM Instance Home           : /oem12c/product/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is unlocked.
Active CA ID: 1
Console URL: https://chh-aix-beta:7799/em
Upload URL: https://chh-aix-beta:1159/empbs/upload
WLS Domain Information
Domain Name      : GCDomain
Admin Server Host: chh-aix-beta
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: chh-aix-beta
WebTier is Up
Oracle Management Server is Up2. I got the version and the platform info of the oms by doing the following
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emcli get_supported_platforms
Getting list of platforms ...
Check the logs at /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/emcli/setup/.emcli/agent.log
About to access self-update code path to retrieve the platforms list..
Getting Platforms list ...
Version = 12.1.0.2.0
Platform = IBM AIX on POWER Systems (64-bit)
Platforms list displayed successfully.3. I downloaded the management agent software by doing the following ()
$<OMS_HOME>/bin/emcli get_agentimage -destination=/oem12102 -platform="IBM AIX on POWER Systems (64-bit) " -version=12.1.0.2.04. I unzipped the management agent software.
5. I edited the response file as follows. (i edited only the oms_host, em_upload_port, agent_registration_password, since they are the only ones that are mandatory)
OMS_HOST=172.16.24.65
EM_UPLOAD_PORT=1159
AGENT_REGISTRATION_PASSWORD=cchorcl01
#AGENT_INSTANCE_HOME=
#AGENT_PORT=
b_startAgent=true
#ORACLE_HOSTNAME=
#s_agentHomeName=
EM_INSTALL_TYPE="AGENT"6. then i ran the AgentDeploy.sh script using the following.
./agentDeploy.sh -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp(I ignored the prereqs because, i was getting an error with the hostname and the hostname is correct)
7. this the following output i am getting after running step 6.
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -classpath /oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent -prereq
Validating oms host & port with url: http://172.16.24.65:1159/empbs/genwallet
Validating oms host & port with url: https://172.16.24.65:1159/empbs/genwallet
Return status:3
Unzipping the agentcoreimage.zip to /oem12c/base/agent ....
12.1.0.2.0_PluginsOneoffs_212.zip
Executing command : /oem12102/unzip -o /oem12102/12.1.0.2.0_PluginsOneoffs_212.zip -d /oem12c/base/agent
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -d64 -classpath /oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/xmlparserv2.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/srvm.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/emCfg.jar:/oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/share.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent /oem12c/base/agent/agent_inst AGENT_BASE_DIR=/oem12c/base/agent -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp
Cloning the agent home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/core/12.1.0.2.0 -responseFile /oem12102/agent.rsp AGENT_BASE_DIR=/oem12c/base/agent AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp -noconfig ORACLE_HOME_NAME=agent12c3 -force b_noUpgrade=true AGENT_PORT=-1
Clone Action Logs Location:/software/oracle/logs/cloneActions<timestamp>.log
Cloning of agent home completed successfully
Attaching sbin home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -attachHome -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/sbin ORACLE_HOME_NAME=sbin12c3 -force
Attach Home Logs Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/AttachHome<timestamp>.log
Attach home for sbin home completed successfully.
Updating home dependencies...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -updateHomeDeps -waitForCompletion HOME_DEPENDENCY_LIST={/oem12c/base/agent/sbin:/oem12c/base/agent/core/12.1.0.2.0,} -invPtrLoc /oem12c/base/agent/core/12.1.0.2.0/oraInst.loc -force
Update Home Dependencies Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/UpdateHomeDeps<timestamp>.log
ERROR: Update home dependency failed.I am getting stuck at updating home dependencies. I dont know what that means. If you have faced similar problems while installing oracle management agent please do share your solution. if you need more info please let me know.

All these commands are run on the host (hostname=chh-lpar20) where the agent is being installed, and these commands are run as root user.
ifconfig -a
en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
        inet 172.16.28.222 netmask 0xfffffc00 broadcast 172.16.31.255
         tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN>
        inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
        inet6 ::1%1/0
         tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1ping chh-lpar20
PING chh-lpar20: (172.16.28.222): 56 data bytes
64 bytes from 172.16.28.222: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 172.16.28.222: icmp_seq=1 ttl=255 time=0 msnslookup chh-lpar20
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find chh-lpar20: NXDOMAINnslookup 172.16.28.222
Server:         172.16.29.213
Address:        172.16.29.213#53
** server can't find 222.28.16.172.in-addr.arpa: NXDOMAINto check the if the port 3872 and 1830-1849 are free I ran the follwoing command
./agentDeploy.sh -prereqOnly AGENT_BASE_DIR=/oem12102/base/agent
this was the result i got inregards to the ports
Check complete: Passed
========================================================
Performing check for PortCheck
Checking for port availability and hostname validity...
Trying for host : chh-lpar20/172.16.28.222 and port : 3872
Trying for host : chh-lpar20/192.168.12.23 and port : 3872
Port= 3872 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1830
Trying for host : chh-lpar20/192.168.12.23 and port : 1830
Port= 1830 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1831
Trying for host : chh-lpar20/192.168.12.23 and port : 1831
Port= 1831 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1832
Trying for host : chh-lpar20/192.168.12.23 and port : 1832
Port= 1832 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1833
Trying for host : chh-lpar20/192.168.12.23 and port : 1833
Port= 1833 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1834
Trying for host : chh-lpar20/192.168.12.23 and port : 1834
Port= 1834 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1835
Trying for host : chh-lpar20/192.168.12.23 and port : 1835
Port= 1835 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1836
Trying for host : chh-lpar20/192.168.12.23 and port : 1836
Port= 1836 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1837
Trying for host : chh-lpar20/192.168.12.23 and port : 1837
Port= 1837 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1838
Trying for host : chh-lpar20/192.168.12.23 and port : 1838
Port= 1838 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1839
Trying for host : chh-lpar20/192.168.12.23 and port : 1839
Port= 1839 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1840
Trying for host : chh-lpar20/192.168.12.23 and port : 1840
Port= 1840 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1841
Trying for host : chh-lpar20/192.168.12.23 and port : 1841
Port= 1841 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1842
Trying for host : chh-lpar20/192.168.12.23 and port : 1842
Port= 1842 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1843
Trying for host : chh-lpar20/192.168.12.23 and port : 1843
Port= 1843 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1844
Trying for host : chh-lpar20/192.168.12.23 and port : 1844
Port= 1844 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1845
Trying for host : chh-lpar20/192.168.12.23 and port : 1845
Port= 1845 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1846
Trying for host : chh-lpar20/192.168.12.23 and port : 1846
Port= 1846 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1847
Trying for host : chh-lpar20/192.168.12.23 and port : 1847
Port= 1847 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1848
Trying for host : chh-lpar20/192.168.12.23 and port : 1848
Port= 1848 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1849
Trying for host : chh-lpar20/192.168.12.23 and port : 1849
Port= 1849 is busy.
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Either port is unavailable or hostname configuration is not valid.
Recommendation: Make sure the port is available and the hostname configuration i
s proper.I don't know what to make of the results I got for executing the nslookup command.

Common Agent Container Problem on New Solaris Cluster 3.2 (1/09)

Hi,
I have just installed Solaris Cluster 3.2 u2. Getting following error when run cluster check or sccheck -v 2:
cluster check
cacaocsc: unable to connect: Connection refused by peer
cluster check: (C704199) unable to reach Common Agent Container
sccheck -v 2
sccheck: Requesting explorer data and node report from node1.
sccheck: Requesting explorer data and node report from node1-cl.
sccheck: node1: Additional explorer arguments: -w !default,cluster,disks,etc,messages,nbu,netinfo,patch,pkg,sds,lvm,sonoma,sysconfig,var,vxvm,vxfs,vxfsextended -c "/usr/cluster/lib/sccheck/vfstab-global-mount-points" -c "/usr/cluster/lib/sccheck/netapp-nas-quorum-devices"
sccheck: node1: WARNING: EXP_CONTRACT_ID not set!
sccheck: node1: WARNING: EXP_REPLY not set!
sccheck: node1:
sccheck: node1: 2 warnings found in /etc/opt/SUNWexplo/default/explorer
sccheck: node1:
sccheck: node1: Mar 07 21:56:15 node1[5519] explorer: ERROR explorer
sccheck: node1: Mar 07 21:56:15 node1[5519] explorer: ERROR Module or alias sds does not exist.
sccheck: node1: Explorer run failed:
sccheck: node1-cl: Additional explorer arguments: -w !default,cluster,disks,etc,messages,nbu,netinfo,patch,pkg,sds,lvm,sonoma,sysconfig,var,vxvm,vxfs,vxfsextended -c "/usr/cluster/lib/sccheck/vfstab-global-mount-points" -c "/usr/cluster/lib/sccheck/netapp-nas-quorum-devices"
sccheck: node1-cl: WARNING: EXP_CONTRACT_ID not set!
sccheck: node1-cl: WARNING: EXP_REPLY not set!
sccheck: node1-cl:
sccheck: node1-cl: 2 warnings found in /etc/opt/SUNWexplo/default/explorer
sccheck: node1-cl:
sccheck: node1-cl: Mar 07 21:56:15 node1-cl[3851] explorer: ERROR explorer
sccheck: node1-cl: Mar 07 21:56:15 node1-cl[3851] explorer: ERROR Module or alias sds does not exist.
sccheck: node1-cl: Explorer run failed:
sccheck: node1 error: Unexpected early return from server.
sccheck: node1-cl error: Unexpected early return from server.
sccheck: Unable to run checks on: node1,node1-cl
Even when I try to run Cluster Manager from web I am getting following error:
"A communication problem was encountered by the system"
Following is the version I am using:
root@node1 #
root@node1 # cacaoadm -V
2.2.0.1
root@node1 #
root@node1 # smcwebserver -V
Version 3.1
root@node1 #
root@node1 #
root@node1 # svcs -a | grep container
online 21:30:30 svc:/application/management/common-agent-container-1:default
root@node1 #
root@node1 #
root@node1 # svcs -a | grep webconsole
online 21:20:29 svc:/system/webconsole:console
root@node1 #
root@node1 #
root@node1 #
root@node1 # cat /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
root@node1 #
root@node1 #
root@node1 # cat /etc/cluster/release
Sun Cluster 3.2u2 for Solaris 10 sparc
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
root@node1 #
root@node1 #
Do you have any idea or tips to solve this problem?
Thanks
Edited by: shmozumder on Mar 8, 2009 1:50 AM

Hi Tim,
Yes - it's running:
default instance is ENABLED at system startup.
Smf monitoring process:
29410
29411
Uptime: 0 day(s), 0:14
dssdbgen03p1 # svcs -a |grep -i comm
disabled 17:03:06 svc:/network/rpc/mdcomm:default
online 13:20:53 svc:/application/management/common-agent-container-2:default
uninitialized 16:58:32 svc:/application/management/common-agent-container-1:default
I also get messages like the following in the /var/adm/messages file when starting cacaoadm :
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.rmi.impl.RMIModule in module com.sun.cacao.rmi
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.invoker.impl.InvokerModule in module com.sun.cacao.invoker
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.snmpv3adaptor.SnmpV3AdaptorModule in module com.sun.cacao.snmpv3_adaptor
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.dtrace.impl.DTraceModule in module com.sun.cacao.dtrace
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.rbac.impl.RbacModule in module com.sun.cacao.rbac
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.instrum.impl.InstrumModule in module com.sun.cacao.instrum
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.commandstream.CommandStreamAdaptorModule in module com.sun.cacao.command_stream_adaptor

Agent Configuration Problem

This in on an HPUX 64-bit system. I'm getting these errors during the configuration step. The install of 10.2.0.1 and Patch to 10.2.0.4 had no errors. We're not running IAS anywhere. I've confirmed that the files it says it can't find are there (right where it says it's looking). Don't know what the problem securing OMS is, trying to find other related log files....
Any help is appreciated.
Here are the errors:
First error in log:
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = /u02/app/oracle/EM/agent10g/jlib/srvm.jar:/u02/app/oracle/EM/agent10g/jlib/srvmhas.jar:/u02/app/oracle/EM/agent10g/oui/jlib/srvm.jar:/u02/app/oracle/EM/agent
10g/sysman/jlib/agentPlug.jar:/u02/app/oracle/EM/agent10g/jlib/emConfigInstall.jar:/u02/app/oracle/EM/agent10g/sysman/jlib/emagentSDK.jar
INFO: oracle.sysman.top.agent:staticPortsini :
INFO: oracle.sysman.top.agent: the host is amefird.amefird.com
INFO: oracle.sysman.top.agent:The emdPath is /u02/app/oracle/EM/agent10g/sysman/config/emd.properties
INFO: oracle.sysman.top.agent:The port is http://amefird.amefird.com:%EM_SERVLET_PORT%/emd/main/
INFO: oracle.sysman.top.agent: else part The agent port is 3872
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for /u02/app/oracle/EM/agent10g and hosts=amefird.amefird.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=amefird.amefird.com
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.amefird.amefird.com, C
RShome=, dbName=dbmgr, seedInstall=false, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=amefird.amefird.com)(PORT=1531)))(CONNECT_DATA=(SID=dbmgr)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: /u02/app/oracle/EM/agent10g/bin/emctl secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 2
INFO: oracle.sysman.top.agent:Requested Operation /u02/app/oracle/EM/agent10g/bin/emctl secure agent has failed to perform with Status = 2
STDERR=
Second Error in log:
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Failed to stop agent...
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=/u02/app/oracle/EM/agent10g,hname=amefird.amefird.com...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: /u02/app/oracle/EM/agent10g/perl/bin/perl /u02/app/oracle/EM/agent10g/sysman/admin/discover/host.pl /u02/app/oracle/EM/agent10g amefird.amefird.com
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
Third Error in log:
INFO: oracle.sysman.top.agent:Adding /u02/app/oracle/EM/agent10g/sysman/install/target.outocs file to /u02/app/oracle/EM/agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = /u02/app/oracle/EM/agent10g/sysman/install/target.outocs to /u02/app/oracle/EM/agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: /u02/app/oracle/EM/agent10g/perl/bin/perl /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl /u02/app/oracle/EM/agent10g amefird.amefird.
com
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 255
INFO: oracle.sysman.top.agent:STDERR=
Can't load '/u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/auto/XML/Parser/Expat/Expat.sl' for module XML::Parser::Expat: No such file or directory at /u02/app/oracle/EM
/agent10g/perl/lib/5.8.3/PA-RISC2.0-thread-multi/DynaLoader.pm line 229.
at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 14
Compilation failed in require at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 14.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 18.
Compilation failed in require at /u02/app/oracle/EM/agent10g/sysman/admin/scripts/ias/simpleXPath.pm line 47.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/sysman/admin/scripts/ias/simpleXPath.pm line 47.
Compilation failed in require at /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl line 82.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl line 82.
STDOUT=
INFO: oracle.sysman.top.agent:Requested Operation /u02/app/oracle/EM/agent10g/perl/bin/perl /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl /u02/app/oracle/EM/agent10g amefird.amefird
.com has failed to perform with Status = 255
INFO: oracle.sysman.top.agent:Executing Command: /u02/app/oracle/EM/agent10g/perl/bin/perl /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_apache.pl /u02/app/oracle/EM/agent10g amefird.amefi
rd.com
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.

Can't load '/u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/auto/XML/Parser/Expat/Expat.sl' for module XML::Parser::Expat: No such file or directory at /u02/app/oracle/EM
/agent10g/perl/lib/5.8.3/PA-RISC2.0-thread-multi/DynaLoader.pm line 229.
at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 14
Compilation failed in require at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 14.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/perl/lib/site_perl/5.8.3/PA-RISC2.0-thread-multi/XML/Parser.pm line 18.
Compilation failed in require at /u02/app/oracle/EM/agent10g/sysman/admin/scripts/ias/simpleXPath.pm line 47.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/sysman/admin/scripts/ias/simpleXPath.pm line 47.
Compilation failed in require at /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl line 82.
BEGIN failed--compilation aborted at /u02/app/oracle/EM/agent10g/sysman/admin/discover/oracle_ias.pl line 82.
Give this a try..
Agent configuration assistant fails at host discovery due to incorrect perl version
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472042.1

Agent unreachable problem

One of the monitored SuSE Linux host in my Grid OEM has status "Agent unreachable". As such the host has not been monitored. It was ok before and I am not sure why (and from when) it has the problem. I have checked and the dbsnmp agent on the Linux host is up and running. I have restarted the agent but it does not help.
Below is the output from "emctl status agent" command issued on the Linux host.
What do I need to check and try?
Many thanks.
Checking Agent status, please wait...
The Oracle base for ORACLE_HOME=/opt/app/oracle/product/agent/agent11g is /opt/app/oracle
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Agent Version : 11.1.0.1.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /opt/app/oracle/product/agent/agent11g
Agent binaries : /opt/app/oracle/product/agent/agent11g
Agent Process ID : 4684
Parent Process ID : 4572
Agent URL : https://romulus.it.csiro.au:3872/emd/main/
Repository URL : https://oraserv.it.csiro.au:1159/em/upload
Started at : 2011-01-26 20:22:05
Started by user : oracle
Last Reload : 2011-01-26 20:22:05
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 2
Size of XML files pending upload(MB) : 0.29
Available disk space on upload filesystem : 1.97%
Last successful heartbeat to OMS : 2011-01-26 20:22:25
Agent is Running and Ready

I issued the "emctl upload agent" command and got some error message about not enough space. I noticed that the /opt/app file was 99% full (it still had few GB free), and I did some clean up and got it down to 93% full (120 GB free now). I then issued "emctl upload agent" again and it gev the output
Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
EMD upload completed successfully
I then checked my Grid Control OEM and the agent unreachable problem is no longer there. :-)
I will check the log files under sysman/log to investigate the original problem further.
Many thanks for your help.
Cheers.

Oracle intelligent agent

hi ;
os : suse sles9 sp3 Oracle 9.2.0.4
when i am trying to start oracle intelligent agent ı get this error message ;
DBSNMP for Linux: Version 9.2.0.4.0 - Production on 18-APR-2004 02:32:56
Copyright (c) 2003 Oracle Corporation. All rights reserved.
Starting Oracle Intelligent Agent.../opt/oracle/9.2.0.4/bin/dbsnmpwd:
line 156: 2927 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $*
$DBSNMP_WDLOGFILE 2>&1
/opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2940 Segmentation
fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
/opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2952 Segmentation
fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
/opt/oracle/9.2.0.4/bin/dbsnmpwd: line 156: 2964 Segmentation
fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
how can ı solve this problem ?
Edited by: Gundem on Sep 17, 2008 3:30 AM

check this metalink notes:
Note:295385.1 - The 9.2.0.4 Intelligent Agent Does Not Start on Linux
Note:295920.1 - Agent Fails with Segmentation Fault on 9204; Patch 3238244 Will Not Apply

Oracle Intelligent Agent cannot be started

I have installed Oracle 9i into RedHat Linux 9. When I start the Oracle Intelligent Agent, I get nothing response, and find the agent cannot be started.
I find the error message in dbsnmp.nohup which is showed below:
/opt/ora9/product/9.2/bin/dbsnmp: error while loading shared libraries: libvppdc.so: cannot open shared object file: No such file or directory
Agent exited at Thu Nov 13 23:20:31 HKT 2003 with return value 127
Agent thrashing. Exiting dbsnmpwd at Thu Nov 13 23:20:31 HKT 2003
I found the library object is existed.
[oracle@localhost lib]$ ll libvpp*
-rw-r--r-- 1 oracle oinstall 552036 Apr 26 2002 libvppdc.so
Can anyone help me to solve the problem?
Thank you.
Regards,
Franklin

Problem of method 1 (for re-install the oem agent / dbsnmp)
When I follow the "work Around Procedure" from
http://www.puschitz.com/InstallingOracle9i.shtml#OracleInstallationErrors
and download the RPMs (glibc-2.3.2-5.i686.rpm glibc-common-2.3.2-5.i386.rpm glibc-devel-2.3.2-5.i386.rpm) for the procedures.
When I run the command (#rpm -Uvh --oldpackage glibc-2.3.2-5.i686.rpm glibc-common-2.3.2-5.i386.rpm glibc-devel-2.3.2-5.i386.rpm),I found the error shown below:
error:glibc-2.3.2-5.i686.rpm:V3 DSA Signature:BAD, key ID db42a60e
error:glibc-2.3.2-5.i686.rpm cannot be installed
Problem of method 2
When I try to unpack glibc-2.3.2-5.i686.rpm and replace libc-2.3.2.so and libc.so.6 by using the following steps
# mkdir /root/tmp
# mv glibc-2.3.2-5.i686.rpm /root/tmp
# cd /root/tmp
# rpm2cpio glibc-2.3.2-5.i686.rpm | cpio -idmv
# cp /lib/libc-2.3.2.so /lib/libc-2.3.2.so.ORIG
# cp lib/libc-2.3.2.so /lib/.
# rm -f /lib/libc.so.6
# ln -s /lib/libc-2.3.2.so /lib/libc.so.6
I find the system is halted, when I run (# cp lib/libc-2.3.2.so /lib/.) When I reboot the system, I find error
init:error while loading shared libraries:libc.so.6:cannot open shared object file:No such file or directory
Kernel panic: Attempted to kill init.
Please help me to fix the problem. Many thanks.
Regards,
Franklin.

Oracle VM Agent- Communication problem

Similar Messages

Maybe you are looking for