[Oracle VM Manager 3.1.1] Unable to setup TCPS

Hello,
I'm trying the setup the TCPS protocol for Oracle VM Manager (OVMM) 3.1.1.
I used secureOvmmTcpGenKeyStore.sh to create a certificate and secureOvmmTcp.sh to setup OVMM.
However, when I start OVMM, I'm getting the following error and the TCPS protocol is not enabled:
:####<Jul 3, 2012 9:18:20 AM CEST> <Info> <com.oracle.odof.core.WorkflowManager> <ovmmanager.comunefaenza.local> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JXBgyXBFw0WFLzePOA1FwdmX000002> <1341299900914> <BEA-000000> <Failed to start tcps service at port: 54322 message: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)>
I checked the installation with
ovm_managercontrol -u admin -p XXX -h localhost -c keystoreinfo
whose output is:
Oracle VM Manager Control utility 0.5.2.
Manager version : 3.1.1.365
Connected.
Command : keystoreinfo
Key Store information :
Key Path : '/u01/app/oracle/ovm-manager-3/ovmmCoreTcps.ks'
The keystore ovmmCoreTcps.ks is there and is readable and writable for oracle:dba.
Any help will be appreciated.
Alessandro

I just did it a couple of weeks go in my system and it went pretty smooth. Are you running any firewall or have something that might be using the port used for tcps?

Similar Messages

Unable to log-in in Oracle Identity Manager Design Console

Hello,
I successfully installed OIM9.1.0.1 Identity Manager on Jboss4.2.3.GA App server and could login to OIM using http://llocalhost:8080/xlWebApp on my window Server 2003 system without any problem.
Then I installed the Design Console on my window XP system. However, after successfully installing the Design Console, I could not login using the xelsysadm user ID.
I checked to make sure that xlconfig.xml contains the right URL file under oim_designConsole directories.
The error I get from the Design Console login window is:
Internal Login
Oracle Identity Manager Design Console Could not log you in.
In the dos-command window, I got the error:
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Could
not find marshaller for data type 'invocation'. Object in collection is null
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Found
marshaller fully qualified class name within locator parameters, but was unable
to load class: org.jboss.invocation.unified.marshall.InvocationMarshaller
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Could
not find marshaller for data type 'invocation'. Object in collection is null
java.lang.reflect.UndeclaredThrowableException
at $Proxy0.create(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBaseClient$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.dataaccess.tcDataBaseClient.bindToInstance(Unknown So
urce)
at com.thortech.xl.dataaccess.tcDataBaseClient.<init>(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.<init>(Unknown Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.<init>(Unknown Source
at com.thortech.xl.client.base.tcAppWindow.internalLogin(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.login(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.<init>(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.main(Unknown Source)
Caused by: org.jboss.remoting.marshal.InvalidMarshallingResource: Can not find a
valid marshaller for data type: invocation
at org.jboss.remoting.RemoteClientInvoker.invoke(RemoteClientInvoker.jav
a:78)
at org.jboss.remoting.Client.invoke(Client.java:226)
at org.jboss.remoting.Client.invoke(Client.java:189)
at org.jboss.invocation.unified.interfaces.UnifiedInvokerProxy.invoke(Un
ifiedInvokerProxy.java:184)
at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerIntercep
tor.java:227)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.jav
a:167)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.
java:46)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:5
5)
at org.jboss.proxy.ejb.HomeInterceptor.invoke(HomeInterceptor.java:169)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
I would really appreciate your help in this regards.
Thanks for helping me resolve this issue.
Regards,
Dhirendra

vBackup the original file log4j-1.2.8.jar in oimclient/xlclient/ext
copy the log4j.jar from JBOSS folder - JBOSS/server/default
Paste the file in client folder with original log4j-1.2.8.jar
Rename log4j.jar file to log4j-1.2.8.jar
start ur JBOSS.. this shd work.

Unable to start Oracle Process Manager from the windows services for OBIEE

Hi,
I have OBIEE 11g installed on a 32-bit windows machine. Of the two windows services installed, I am unable to start the Oracle Process Manager. When I try to start it I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
At the back end, this service is calling the file opmn.exe which is placed at MIDDLEWAREHOME\Oracle_BI1\opmn\bin. On trying to execute this file the error we get is:
The procedure entry point longjmp could not be located in the dynamic link library orauts.dll
I have tried replacing the orauts.dll file, but to no avail.
Please let me know if you have any clue regarding what is to be done.
Thanks
Naman

Hi Naman,
This error occurs for the following reasons,
*Path variable is not set properly
*Multiple Oracle homes exists in the same machine.
Follow the below steps and let me know if it works,
1. Select My Computer -> Right Click -> Properties
2. In the System Properties screen go to Advanced Tab
3. Click on Environment Variables
4. In the System Variables section select PATH variable & Click edit
5. Now you will find that it will contain invalid directories. Remove the incorrect entries. This may happen when you have multiple oracle homes in the same machine
6. Restart the service.
Rgds,
Dpka

Unable to start obiee11g oracle process manager

hi,
i am unable to start the server
console services are started and bni_server1 also started but oracle process manager is not running
please help
thanks
chinu

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

Unable to run the oracle Process Manager service

Unable to run the services of
1) oracle Process Manager service(EPM_epmsystem1)
2) Oracle Process Manager (ohsInstance1649849633)
error message is displayed as below.
Error 1053 the service did not respond to the start or control request in timely fashion.
Thanks.

–> Start NodeManager from the Command Prompt
Cd bi0104\wlserver_10.3\server\bin
startNodeManager.cmd
Wait untill you see message “Secure socket listener start at port……”
–> Start Admin server from command prompt
Cd bi0104\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password. Specify the user details that you used at the time of the Oracle BI 11g install. You could also use a ‘Boot Identity File’ -(boot.properties). Check the documentation for more details.
Wait untill you see message Admin server is in ‘RUNNING MODE’.
–> Now start Managed server from GUI
Access WebLogic console from a webbrowser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for the Managed server to start. Wait untill you see the ‘Running’ status.
–> Now start the OBIEE components from command prompt
Cd bi0104\instances\instance7\bin
opmnctl startall
Note that it’s a possible startup sequence. There are multiple ways to statup.
i am getting all above messages all but not getting oracle process manager up in the services.msc
error : not getting up in timely fashion -1053
thanks
Edited by: user11165720 on Apr 1, 2011 4:24 AM

TNS-04012: Unable to start Oracle Connection Manager instance.

Hi,
I've tried to configure Connection Manager but i fails on:
TNS-04012: Unable to start Oracle Connection Manager instance
This is my configuration (I've removed as much as possible to remove possible errors):
CMAN1=(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522))
(RULE_LIST=
(RULE=(SRC=*)(DST=<IP>)(SRV=*)(ACT=accept))))
CMCTL> administer CMAN1
Current instance CMAN1 is not yet started
Connections refer to (ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522)).
The command completed successfully.
CMCTL:CMAN1> startup
TNS-04012: Unable to start Oracle Connection Manager instance.I've reviewed following notes without getting any closer (298916.1 and 733421.1)
I can't see any errors in any of the following possible issues:
* The max_connections value must not exceed 1024. Maximum acceptable value is 1024
* The max_gateway_processes value must not exceed 64. Maximum acceptable value is 64
* The trace_directory and log_directory values must be valid
* The trace_level and log_level values do not support numeric values 6,10 and 16
* Duplicate sections
* Misspelled parameter names or parameter values
* Host values that are not resolvable
* Rule list must allow the local address of the machine where cman is installed
* A specfic address in SRC or DST for a rule in the rule list must be resolvable(Try ip address range as a workaround and see the enhancement request 6125025)
* Windows: Ensure the ORA_DBA group is present and O/S user starting CMAN is in the group
* Windows: Ensure any firewall is not blocking Oracle from using Network
All help are appreciated!
Cheers

933746 wrote:
Osama_mustafa wrote:
Refer to
Troubleshooting Guide: TNS-04012: Unable to Start Oracle Connection Manager Instance [ID 733421.1]Hi,
As I've stated in my post I've reviewed this post without any help.I would suggest you read the provided doc [ 733421.1] more thoroughly.... the answer is there.

Unable to Install Ubuntu 12.04 64 bit on OVM 2.3 (Oracle Virtual Manager)

Unable to Install Ubuntu 12.04 64 bit on OVM 2.3 (Oracle Virtual Manager)
I can upload the iso file properly however the installation doesn't get start and below is the log:
Start - /OVS/running_pool/90_Ubuntu
PowerOn successfully.
Update server -172.168.***.***
Update Port - 0.0
Update VM Status - Running
Configure CPU Cap
Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '90_Ubuntu', '-c', '0'] => Error: Domain '90_Ubuntu' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMConfig.py", line 1108, in set_vm_cpu_cap
if not rs.startswith("success"): raise Exception(rs)
Any help on this is highly appreciated.
Thanks,
Sachin

Hi,
There is probably no much difference between the two.
The reason I have tried with 3.0.2 is that the minimun required RAM for installation is 4G.
With 3.1.1 it is 6 G, and I have a limitation in memory.
Or does someone know if it possible to perform the installation with less RAM that what is specified?
Kind Regards.

Unable to access Oracle VM Manager from browser

Hi,
I am unable to access the Oracle VM Manager from my browser at any of the url's e.g. /em; /OVS; /apex
I can connect to my server via putty, so I know the IP address that I am using is correct.
In the /var/ovm-manager/oc4j.log file I get the following message:
ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
The oc4j service is running and the ovs-agent service is running but I cannot connect.
I am new to Oracle VM and Linux for that matter so it is entirely possible that something is not configured correctly somewhere
I'll appreciate it if anyone can assist
Thanks

Try this command from the console or SSH to the server:
service iptables stop
If you can then access the URLs you will need to modify iptables to allow port 8888
I think this is the command:
iptables -I INPUT -p tcp --dport 8888 -j ACCEPT
then:
service iptables start
Then try to connect again.

Unable to import the user certificate into the Oracle Wallet Manager

Hi,
I am configuring the External Authentication plugin using the password filters.
i am using the version 10.1.0.5.0 version of Oracle Wallet manager
inorder to do that i am enabling the SSL mode.
to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
User Certificate Installation failed.
Possible errors:
- Input was not a valid certificate
- No matching certificate request found
- CA certificate needed for certificate chain not found.
Please install it first
can anyone help me how to resolve this problem.

hi,
thanks for your reply pramod
I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
what may be the problem.

Unable to install Oracle VM Manager 3.0.2 on OEL 5.9 64 bit

Hi,
I am attempting to install Oracle VN Manager 3.0.2 on OEL 5.9 64 bit.
I follow the instructions published in Installation and Upgrade Guide Release 3.0 for x86 (E18548-02).
I use the "Standard Install", using a database on another server.
This is an Oracle 11gR2 SE database.
My installation stops at:
/runInstaller.sh
Step 5 of 9 : ADF ...
Retrieving Oracle Application Development Framework (ADF) ...
Unzipping Oracle ADF ...
Installing Oracle ADF ...
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
[root@localhost cdrom]#
But according to the documentation, I shuld end up with:
Enabling Oracle VM Manager service ...
Installation Summary
Database configuration:
I don't see such a summary.
Event If I try
http://<IP address of the VM Manager server>:7001/ovm/console
https://<IP address of the VM Manager server>:7002/ovm/console
I get a "page not found"
Ports: 7001 amd 7002 are open, as described in the above documentation.
Does someone has experience with it?
Thanks by advance for any tips.
Kind Regards.

Hi,
There is probably no much difference between the two.
The reason I have tried with 3.0.2 is that the minimun required RAM for installation is 4G.
With 3.1.1 it is 6 G, and I have a limitation in memory.
Or does someone know if it possible to perform the installation with less RAM that what is specified?
Kind Regards.

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to drop Oracle Enterprise Manager console in Oracle 11g

Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Jun 16, 2009 9:59:58 PM
EM Configuration Assistant, Version 11.1.0.7.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: NM45
Listener port number: 1529
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
al
WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
D:\Oracle\Ora11G\BIN>
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanks
With Regards
Hemant

hem_kec wrote:
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
ORACLE_HOME/bin/emca -x <sid>
ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanksok
With Regards
Hemantbest regards

Unable to start Oracle Process manager (instance1) service.

When I try to start this service I get the following error in Event Manager:
Faulting application opmn.exe, version 11.0.0.0, time stamp 0x4ed8d1e8, faulting module yod.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000135, fault offset 0x00000000000b6fc8, process id 0x1ca4, application start time 0x01cd660277503c3a.
But if I try through the command prompt 'opmnctl start' it works just fine. The problem is now I have to stay logged into the machine, if I log out opmn shuts down.
This is happening on two servers we have this installed on. Windows Server 2008 (NOT R2) 24gb ram. Otherwise it is running just fine.
Very little help on google for this issue. Any help would be great.

Sorry if I was not clear on my issues, but it is when I try to start the windows service, (Oracle Process Manager (instance1), that I get this error in the Event Logs.
Does anyon know the difference between the commands for starting this service through Windows Services and 'opmnctl start'?
Edited by: 844667 on Jul 20, 2012 8:05 AM
Edited by: 844667 on Jul 20, 2012 8:06 AM

Unable to see the SSL port in the Oracle Enterprise Manager

Hi,
I followed the step for SSL setup in the given link Re: Tech Note : SSL Setup for Oracle AS B2B
When I open the Oracle Enterprise Manager console, I am not able to see the SSL port. I found that Accessibility Mode is Disabled. Please help me to enable the accessibility mode and also to find SSL port.

I tried giving the ssl ports 1810 - 1829. it did not work out. I am trying to access the URL https://localhost:1829/b2b/transportServlet. Any one has idea about how to enable the SSL port in the Oracle Enterprise Manager.

Unable to copy Transaction in Oracle recievales manager

Ebs 12.1.3
oracle receivables manager
steps to reproduce the problem
receivables manager>transactions>copy transaction
after querying the transaction number in the schedule section
number of days and first gl date gives error
ERROR
An Unexpected Error-1403 has occurred. An alert has been sent to the system administrator.
ORA-01403: no data found
I compiled all the ar forms and compile apps schema
there are 32 invalid objects out of which not a single belongs to apps schema
Thankz
ApPSMAStI
SHARInG IS CArInG

yeah there are some error in Apache log file the error are regarding java files
[Sun Oct 2 sometime] [error] [client address]
[ecid: 1317514466:xx.xx.xx.xx:10355:0:217,0] File does not exist:/apps/apps_st/comn/java/classes/
[Sun Oct 2 sometime] [error] [client address]
[ecid: 1317514466:xx.xx.xx.xx:10355:0:218,0] File does not exist: /apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
and the rest of the files are
any workaround
Thanks
AppsMAstI
SHariNG
IS
CArInG

[Oracle VM Manager 3.1.1] Unable to setup TCPS

Similar Messages

Maybe you are looking for