Oracle VM Server 2.2 Install Problems (Management Info Screen Skipped)?

Hi,
I am new to Oracle VM Server and I basically following the install guide to install the server on a spare machine we have in the office (a relatively new Dell with an i7 processor and 8gb memory) so we can evaluate it and play with it a bit.
When running the install from a bootable CD everything goes as expected and documented in the install guide up to point number "11. The Oracle VM Management Interface screen is displayed." - when we install it skips these screens and jumps directly to step "15. TimeZone Selection."
We continued with the install but when the VM Server comes up we have no network enabled?
Any help would be greatly appreciated.
Regards,
Bren

Hi BOF,
if the network screen is not displayed during installation, the network card could not correctly be identified, and it may be that the network drivers are not installed.
If you are lucky, the network is still detected and working, but not with the correct drivers.
Did you use OVM Server 2.2. or the latest 2.2.1 (which includes some more network card detections?).
Otherwise I recommended getting the correct network drivers for the card and installing them after the server is running.
Keep in mind, that OVM Server 2.2 is based on OEL 5.3 (respectivly RHEL 5.3) if you are looking for the correct drivers.
Maybe this thread on realtek network cards can give you some more information:
oracle vm - network issue
Regards
Sebastian

Similar Messages

Error - Oracle BI Server has encountered a problem

Dear Experts,
Oracle BI Server has encountered a problem and needs to close. We are sorry for the inconvenience.
Error Signature : szAppName : NQSServer.exe szAppVer : 10.1.3.4 szModName : msvcrt.dll
szModVer : 7.0.2600.5512 offset : 00037fd4
I am facing the above error whenever i point the RPD to Test Intance.
Can you please help me on what can be the root cause for this issue.
Please note I reinstalled OBIEE on the system but still the same issue.
Appreciate your immediate response!!
Thanks
~ Veena

i need your help on this too because i also encounter this error on 10g.
fyi, i just installed oracle 10g (10.2.0.1.0) database and 10g developer suite. i am a newbie to 10g. i used to program using 6i developer and 8i database.
this happens on three different scenarios:
1. when i click on the Canvasses node even it is a new form.
2. whenever i create a new block using the wizard upto the Layout wizard.
3. whenever i click on the Canvasses node after opening an already existing form made from 6i.
i'll be waiting for your responses. thanks.

ORACLE VM Server can not install guest

I have installed ORACLE VM server, it sucks can not use local CD-ROM to install guest, have to mount a remote iso file, but when I use install location nfs:xxx:/path/
got error msg: RPC: not registered.

nfs:xxx:/path/ got error msg: RPC: not registered.this problem is a NFS problem. please verify if NFS server is started successfully or not.
(1)issue "rpcinfo -p" on server to check if portmapper service is ready for NFS.
(2)please make sure you may mount it from command line before hand.
#mount xxx:/path/ /mnt
null

What versions of Oracle Application Server suite to install on Windows 2008

Hello everyone!
Now I want to install Oracle Application Server on Windows Server 2008.
I downloaded 10.1.3.1.0 SOA suite, and also downloaded the patchset for 10.1.3.4, I'm working on windows server 2008,its version is 6.0. and 11g database release(11.1.0.6.0)(installed).
But when I try to install SOA suite, it give me error on 1st screen of universal installer as “checking operating system version: must be 5.0,5.1 or 5.2. actual 6.0 failed<<<< Press enter to exit”.
And when I try to install patchset for 10.1.3.4. It does not show any version problem,but it give me a Error message “There are no patches that need to be applied from the patchset oracle app server patchset 10.1.3.4.0 “,after screen “Specify file locations”.
Please tell me how to install successfully what kind of Oracle AS on Windows Server 2008!
Thanks so much!

Please see the following note on Metalink for most updated Certification Matrix for the OS, your machine and Oracle AS products.
Note Id: 742649.1
If you are using an AMD 64bit machine, then paritcularly check line 88. If you have an intel, see particularly 125 and 126 to see the relevant patches to be applied before installation of your type of AS software.
hope that helps!
AMN

Pls hlp: Oracle 8.16/Forms 6i Install Problems

I am currently running Oracle 8.16 on WIN2K w/o any problems. I want to install Forms and Reports 6i on same machine. Pls tell me how to correctly install Forms and Reports 6i and allow me to use current database in Oracle 8.16.. Thanks

First of all, I wouldn't recommend it. We have many years of experience with Oracle versions 7 through 8i Release 2 and the various incantations of Developer from 2.1 through 6i and the simple fact is that if you try to run them on the same NT system, you will have nothing but headaches. In fact, I would not even run Forms Server and Reports Server on the same machine and definitely NOT either on an 8.1.6 server.
That having been said, begin by reading the 8i Administrator's Guide for Release 2 (8.1.6) for Windows NT. Chapter 3 explains the Optimal Flexible Architecture (OFA, which is a solution to the problem you describe but which cannot easily be retrofit onto even the most current versions of Developer, which use older versions of Net8. This chapter should discourage you even more, but if it doesn't....
Remember that you will need to create your 8.1.6 ORACLE_HOME, FIRST! Install your server there.
Next, install your Forms and Reports Servers:
1. You MUST create a separate ORACLE_HOME for each of these.
2. Don't install these on the same machine as each other or 8.1.6 if you are going to use OEM to start them. In other words, install them as NT services.
3. Ideally (and I mean STRONGLY recommended). Create two adminstrator-level accounts, one for each of Reports Server and Forms Server and do the install as someone in this account. Make sure that you have a default printer set up for the Oracle Reports Server account.
4. Make sure that your DEFAULT ORACLE_HOME is the home of the Forms Server for the Forms Server operation (and the DEFAULT ORACLE_HOME for the REPORTS_SERVER is the Reports Server ORACLE_HOME). This is why you do not want to install these as Administrator. If you do, you'll run into loads of problems with networking.
5. You will need to make note of your NT Registry AFTER the 8.1.6 install but BEFORE the Forms/Reports server install and AFTER the Forms/Reports server install. The registry entries for Oracle products changed with OFA so you will end up with a hybrid of the pre-OFA (Forms/Reports registry) and the OFA registry. Since software using the former will not look for keys created by the latter, make sure that you enter your configuration details (such as REPORTS60_REPORTS_SERVER) in the right branch or things won't work and you won't know why.
Again, I would strongly recommend that you don't do this, but rather, you get a couple of dedicated machines to run the Forms and Reports Server.
Also, if you are going to make either of these accessible via the Web, you will need to consider your WebDb (or alternative) setup as well.
FYI, after trying NUMEROUS configurations with these, we now run 8.1.6, Forms Server and Reports Server on three different machines and run the Web CGI's for Forms and Reports on a fourth machine. That is what I would recommend that you do.

Oracle Application Server 10.2 installation problem: Error in invoking targ

Hi,
I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
Error in invoking target "install" of makefile
I am in the linking part
kindly help me out.
thanks...

This could be if you miss a library or package, did you follow any note to perform the installation?
Have you read the notes in metalink about 6.1?
There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
Greetings.

Newbee 10g Install problem - additonal info

Hello - I am a small scale independent contractor and brand new to the world of Oracle after 15 years in the MS/Sybase camp. Former co-worker of mine told me to check out 10g and I am blown away. Please have patience with me because I am a complete neophyte with Oracle.
Now I have a problem: Installed 10g server on Windows 2003 server standard edition running MS IIS 6 - worked great, first time, opened server database home page, activated hr user etc , accessed with clients using SqlDeveloper, applications with ADO provider, created new logins, databases etc. Everything great.
But next day, I did some maintenance on the 2003 server, un-installed MSSql Server instance and some old apps and registry entries, etc. Subsequently, I was unable to connect to the Oracle 10g server instance, although the Oracle server service was running - accessing database home page got "page not found" error , no connectivity to clients etc. I re-ran 10g server install and clicked on "repair" - repair ran, everything was back - all's well. But every time I reboot that machine, connectivity to 10g is lost again. I re-ran 10g server install and clicked on "repair" - repair ran, everything was OK again. Did about 5 times - couldn't get it working. I checked everything I know about - all Oracle services,firewalls, IIS security etc, DNS, etc. Finally after losing patience and a lot of random trial and error, playing with DNS, services, IIS security etc, client connectivity seems to have come back to life - I reboot 2003 server and 10g connectivity to clients etc. is fine. Services are running in SCM always.
This is the error message from sqldeveloper on client when trying to connect to server
"An error was encountered performing the requested operation:
Listener refused the connection with the following error: ORA12505 - TNS listener does not currently know of SID given in the connect descriptor. The connect descriptor give was 198.162.1.191:1521:ex
vendor code 0"
from sql*plus command line on server after login, following message displays:
ORA-01034A: ORACLE not available
ORA-27101: shared memory realm does not exist.
But I'm not sure what caused the problem and how I managed to fix it! And now it has returned again - interrmittent at seeming random intervals. Any help or clues on this mystery would be most appreciated. What went wrong? How did I fix it? How can I reproduce this behavior so I know how to avoid it and fix the deployment again should this happen.
Thanks
MNG
Edited by: MGoldstone on Dec 5, 2009 5:58 AM
Edited by: MGoldstone on Dec 5, 2009 5:58 AM

Well, first I have the find out where those logs are - I have about 3 hours of experience with Oracle at this point.
This is the error message from sqldeveloper on client when trying to connect to server
"An error was encountered performing the requested operation:
Listener refused the connection with the following error: ORA12505 - TNS listener does not currently know of SID given in the connect descriptor. The connect descriptor give was 198.162.1.191:1521:ex
vendor code 0"
from sql*plus command line on server after login, following message displays:
ORA-01034A: ORACLE not available
ORA-27101: shared memory realm does not exist.
But I'm not sure what caused the problem and how I managed to fix it! And now it has returned again - interrmittent at seeming random intervals. Any help or clues on this mystery would be most appreciated. What went wrong? How did I fix it? How can I reproduce this behavior so I know how to avoid it and fix the deployment again should this happen.
Thanks
MNG
Edited by: MGoldstone on Dec 5, 2009 5:55 AM
Thanks all!
Edited by: MGoldstone on Dec 5, 2009 5:59 AM

Oracle 11g for WinXP VirtualMachine install problem

Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?

957717 wrote:
Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?What is the full path name to the directory where unzipped the files?
Do a system 'find' and locate 'em.ear'. What is the full path name to it? At acommand prompt, enter the following:
cd \
dir /s em.earcopy the entire session -- command and results, and paste back here.
Also, does the path to the installation files contain any spaces? Does the path to the installed ORACLE_HOME contain any spaces?
You have my condolences for having to work with Windows. To paraphrase a line from a popular movie . . "My momma always said Windows was like a box of chocolates."
Edited by: EdStevens on Sep 7, 2012 3:42 PM

Oracle WebLogic Server 10.3.6: weblogic.management.ManagementException

Error:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on /export/home/oracle/mdw4/user_projects/domains/base_domain/servers/AdminServer/tmp/AdminServer.lok. Server may already be running at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:206)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:67)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:74)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<Jan 2, 2014 4:20:35 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 2, 2014 4:20:35 PM CST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 2, 2014 4:20:35 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Solution:
1.Delete file:
/export/home/oracle/mdw4/user_projects/domains/base_domain/servers/AdminServer/tmp/AdminServer.lok, and re-start weblogic.
2.Restart test machine(reboot) and re-start weblogic.

Hi,
If you have a back then restore the below file back and then try to start weblogic:
\Oracle\Middleware\user_projects\domains\<domain_name>\config\config.lok
Thanks,
Sharmela

Oracle 8i EE Solaris 7 install problem

Install 8i(8.1.7) with minimal(or typical) option. Everything went fine until it stalled at step "initializing database" during creating a startup db, with error message "ORA-03114, not connected to Oracle". I ignored it, and then it comes with another error "ORA-27101: shared memory realm does not exist". Anyway, database creation fails.
I have searched the newgroups and found a few similar messages but no formal answers
were found. By the way, I applied all OS patches and made sure pre-install setup. Strangely, I did the same install on the machine with Oracle 8.1.5 without problem.
Any idea ? Thanks
null

seems which the PROCESSES parameter of init.ora changed in 815 -> 817 from 50 to 150
so the kernel parameters in /etc/system cannot be suficient large to startup the database, I has the same problem and increasing the parameters which affect the PROCESSES in init.ora, solved it
null

Oracle Linux 6.2 64bit install problem

Hi all,
I had a installation problem of 64bit Oracle Linux 6.2 with HP proliant dl380 g7 (build-in P410i array controller),
when i try to install the OS, it will keep in black screen after loading the vmlinuz.
I had try the 5.8 32bit version it can pass the vmlinuz.
So, I guess it may be related to driver.
Does any one can help me fix this problem.
thanks,
Kenny

I suggest to try the following:
When the bootloader screen prompts you to press any key to enter the menu... press any key.
Move the cursor to your default Linux kernel, normally Oracle Linux UEK and press the letter 'e'.
Move the cursor down 1 line to the kernel parameter and press the letter 'e' again.
Add the word "nomodset".
If you want to see more details, remove "rhgb quiet"
Press the Enter key when done
Press the letter 'b' to boot the system
If all works, edit /etc/grub.conf and modify the kernel parameter line for a permanent change.

Maverick install problems - lines on screen

I installed Maverick OSX restatrted my computer and now have only lines across the screen. HELP!

MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008.
MacBook Pro (Early 2008): Dark bands showing intermittently on built-in display

How to Install oracle workflow and why we need Oracle Application Server

I want to install and configure Oracle Workflow using Oracle 10g
Please help me and guide me with the process in deatial from scratch what should i need to install
Oracle Database
Oracle Application server middle tier
Oracle Content Management SDK
Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
I am a student
I know just how to install oracle database 10g
and New to oracle Application Server
Waqar Habib

The files at
http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
Please point your browsers to http://otn.oracle.com/software/index.html
Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

Oracle Report Server wierd problem

Hi All,
I am facing very wierd problem with oracle report server.
I am using Oracle Report Server 10g R1. The problem I am facing is as under:
There is custom parameter form where user enters report filter criteria and press a button to create the report.
The problem is that report is giving output some times and sometimes it gives no output at all. Both the times, the parameters passed by user are same. The report executions are done for both runs one after other. We have tried to look in report server trace file but could not find anything. When report server fails to give any data in the report, at the same time, we have tried to execute the report query on SQL prompt and it did return data.
Can any one give any hint where the problem could be ?
Thanks,
Ramchandra Jetwani

Hi,
When i used to get only one page the options like facing, continuous facing are disabled. And displays only single page.
These options are enabled only when there are multiple pages in pdf.
One more thing i found that it happens when I first view the report as pdf it displays
all the pages, then i change the display format to csv and again when i change
the format to pdf the problem starts.
And when I will restart the report server service, it works fine again until i wont view it in CSV format.
Message was edited by:
Yogesh

To install Oracle HTTP Server only

Hi,
I already installed Apex (3.0) in an Oracle database a while ago. I have used our Oracle iAS 10.1.2 as the application server. Now, I would like to install the Oracle HTTP Server in the database server and use it to run Apex. With the 10g companion CD, there is not any option to install the Oracle HTTP Server (Apache 1.3) only. Is there any way that I can install the Oracle HTTP Server only without installing Apex again? Where can I download it?
Also, I heard that there is a version of Oracle HTTP Server (Apache 2) bundled with Oracle 11g. Can I use it for Apex 3.0?
Thanks.
Andy

Hi,
See:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html
Here you have the option, to install HTTP only
Kind regards,
Iloon
PS: be aware this cd contains apex 1.6 ;-)

Oracle VM Server 2.2 Install Problems (Management Info Screen Skipped)?

Similar Messages

Maybe you are looking for