Oracle VM Server 3.0.2 driver errors on install

I am trying to install OVM Server 3.0.2 on a brand new DELL R415 64 Bit AMD server with 64GB RAM and RAID 1
and the screen after choosing the keyboard language asks for the location for the packages
CDROM, Hard Drive, FTP, HTTP
If I choose CDROM the software states that there is no driver asks me to pick from a long list
I have selected each one and no success
If I choose Hard Drive I must select /dev/sda1 /dev/sda2 or /dev/sdb1 (if USB used)
I also have tried to specify the directory location of the ISO images and set to
images
isolinux
Server
all with no luck
The R415 unit has SATA CDROM drive and has worked on a OLE6 install
I have attempted tin install from DVD, CD, and USB thumb Drive with the same results
I tried this same CD and installed the OVM Server on a DELL 1950 with no issues
What can I do?

I solved my problem with an external DVD USB drive and using the F11 Manual Boot to select the device
OVM Server 3.0.2 installed
I hope this helps someone else

Similar Messages

Oracle WebLogic Server 9.2 MP4 - license error

Hi,
I have installed Oracle WebLogic Server 9.2 MP4 on my dev/test server, while starting the server in production mode getting licensed validation error, can any body help on this please.
downloaded 9.2 MP4 from this location (http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html)
<20-Jun-2011 09:04:38 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
Unable to start WebLogic Server!
Exception occurred while reading the license file.
Please make sure you have a valid license.bea
file in the BEA home directory associated with this
installation. For more information about the license.bea
file, see the installation guide for the version of the
software you are using at http://e-docs.bea.com.
Thanks

Hi,
I was able to figure out the root cause. I was using the primitive data type "int" for primary key and foreign key for one of the beans in the relationship. After I changed it to "Integer" wrapper type, the issue got resolved.
-Vinod

GRUB hangs when booting Oracle VM Server via USB External Drive

I installed Oracle VM Server 2.1 on USB external drive (/dev/sde - 80gb) with First Sector Boot Partion (/dev/sde1) as /dev/sda1 (MBR) is already occupied. After a successful installation, I changed the hard-disk device sequence (not boot order) so that USB drive is found as first C: drive. All I got was the word 'GRUB' displayed (hangs) and nothing else. How do I get Oracle VM Server to boot? Should I reinstall now that the hard drive sequence has been changed?
Thank you.

Not Oracle VM-related, so I would say: "Google is your friend!".
Search for "grub change boot sequence": http://www.google.com/search?q=grub%20change%20boot%20sequence

Oracle Application Server 10.2 installation problem: Error in invoking targ

Hi,
I am installing Oracle Application server 10.2 in IBM AIX 6.1 and I encounter this error during the installation..
Error in invoking target "install" of makefile
I am in the linking part
kindly help me out.
thanks...

This could be if you miss a library or package, did you follow any note to perform the installation?
Have you read the notes in metalink about 6.1?
There is some information about oracle Aplicaitons 12, even is not the same, the packages and filesets used to be the same. try to look for them.
Greetings.

Oracle report server service returned service specific error 271

I setup Report 6i to start automatically as NT service in WinNT 4.0 server. Encountered the msg "The oracle report server <server name> service returned service specific error 271".
Can't find any documentations... can anyone please help? Thanks.
Joshua

Hi,
Only thing I can think of is that the User log-in may not have the priviledge to start a serice or some other OS related problem. Or check that you do not have any other service running under same name / or the same port. Workaround would be to use following command to start the Report server:
rwmts60 -listen "server_tns_name"You need to add an entry for the Report server in TNSNAMES.ORA file. Infact for first case also, please check is you have right entry in tnsnames.ora for the Reports Server service.
Thanks,
Rohit

TS130 (1105) Driver Error in Installing Acronis Backup of Windows 2003 R2

I have run into a serires of errors which Lenovo support believes are related to the Intel Management Driver, but we have been unable to locate the appropriate drivers to deal with these error messages. The errors I have received are as follows:
PCI/VEN_8086DEV_1C02&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C26&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
PCI/VEN_8086DEV_1C2D&SUBSYS_400017AA&REV_04 for Windows Server 2003 Standard
halmacpi.dll required to install ACPI MultiprocessorPC (IDtandard computers) in Windows Server 2003 Standard
Support has gone through the available drivers with me but we have not found a solution. Does anyone know what to download to deal with these issues--my Acronis backup of some critical software for my business will not run without these drivers installed.
Thanks!

You must not be familiar with Acronis software.
Let me backup: I had previously purchased a Lenovo server in Dec. 2012 to rebuild my old windows 2003 OS system (a Dell). We successfully moved all the data and set up the software programs on the original Lenovo server with the sole exception of a single SQl based software program that none of the IT experts I consulted with knew how to move. I had called the company who owns the rights to that software program repeatedly in the last 1 1/2 years about the fact that my server was dying, they hadn't provided installation files, I needed to reinstall my license (which was still good) on the new server or I needed to buy a new license, they didn't return my calls.
So, then I bought a second Lenovo server two weeks ago after the old Dell server died yet again (server board this time, Dell thinks) in order to restore this program. Since I don't have installation files, and the company won't get back to me about selling me a new copy, the only way to restore the program is with Acronis, which I had used successfully in trial version for prior hardware failures of this server (this time I have the full version). Acronis does a bare metal install of the entire image of the server; however, to use universal restore onto a new hardware system, you must have the proper drivers. I keep getting errors that these three Intel drivers are missing. So, tier one Lenovo support asked me to post to this board because they couldn't help.
Kristie

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Portal Drive Error--re-install SAP NW Portal Drive software and try again

Dear Experts,
Could you please let me know if there is any permanent fix for
Portal Drive inconsistence behaviour.
1.We use NW2004s SPS 13.
2.After the installation of Portal Drive (version 4.5.6796 ) on an
desktop, windows is not stable and must be restart (cold start).
3. After the restart the problems still exists and only a
deinstallation resolves the problem.
4. Sometimes the problem occurs on connecting to a service,
sometimes on disconnecting.
Sometimes on starting windows, but before the load of Protal
Drive.
5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
NetWeaver Portal Drive software and try again"
6. If we uninstall it and reinstall, it is working fine.
I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
Because i have received complaints from more than 9 users in this week.
Really thanks for helping me
Vishali.B

Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

Oracle 10G DB + 9.2 odbc driver error 12154

I installed on a Windows 2003 Server the Oracle 10G XE database.
then I installed the oracle client Version 9.2.0.1.0 where I only Installed the client and the windows services.
Why I installed the client in Version 9.2.0.1.0: I need the ODBC Driver in Version 9.2.0.0.0 for another software.
The Problem: When i try to connect via the Oracle odbc driver 9.2.0.0.0 (test connection),
I always get Error 12154 . On my Windows 2000 machine where I tested it, it works fine.
It also works fine when I use the odbc driver 10.2 from the XE installation.
Thanks in advance

Solved!

Could not start the Oracle BI server service on local computer - error 1067

Hi Guys,
i've successfully installed the BI.however when i try to start the BI service, i get the above message.any ideas to fix this ?
Thanks
Jag

This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram

Oracle Application Server 10.1.4 Installation Error

Hi,
Ive been trying to install OAS and keep getting installation erros at the OID Configuration Assistant. Im on Sun Solaris 10 and meet all system requirements and have all the patches listed. When I check the oidca.log i get this:
Entering Ldap Post Installation Set File Permissions
Setting wallet file protections
Leaving Ldap Post Installation Set File Permissions
Stopping OID Server using OPMN..
Starting OID Server using OPMN..
Mon Oct 29 04:30:44 GMT 2007 Bind request issued. Waiting for OID Server response.
with a retryCount:20
Mon Oct 29 04:31:14 GMT 2007 Bind request issued. Waiting for OID Server response.
javax.naming.CommunicationException: itsstx2orcdb01:389 [Root exception is java.net.ConnectException: Connection refused]
     at oracle.ldap.util.jndi.ConnectionUtil.returnInitialLdapContext(ConnectionUtil.java:491)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:134)
     at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:156)
     at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:961)
     at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
     at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
     at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
     at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:124)
     at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
     at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
     at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:119)
     at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1668)
     at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2599)
     at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:290)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:133)
     at oracle.ldap.util.jndi.ConnectionThread.run(ConnectionThread.java:61)
it tries many times and then get this at the end:
Mon Oct 29 05:00:14 GMT 2007Could not contact OID server.
Stopping OID Server using OPMN..
oracle.ldap.oidinstall.backend.OIDCAException: OID Server could not be started. Please see the log files.
     at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:972)
     at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
     at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
     at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
     at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
when i check the opmn.log I get this:
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
I saw some documentation that said to restart using oidmon...but I cant find oidmon anywhere....can anyone help?

user602714, have you been able to get past this? I have the same issue. Thanks.

"Load Driver" error while installing Win7 on Satellite C665

My hard drive in my laptop died on me, so I got a new hard drive (Solid State) and am installing Windows 7 on it on my Toshiba (Satellite C665 model PSC55A)
I don't seem to be alone in encountering this error: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now." However everyone seems to get it for different reasons and I've tried multiple things.
The first obvious one: Use the disk I got with the laptop. I've moved houses since I bought the laptop. Looked through every box in the house and and I think it may be lost to oblivion.
The next most obvious: Load the drivers from the Toshiba support. Tried that. Doesn't work. Not sure why, but I downloaded the drivers from Toshiba, extracted them, put them on a USB. In "Install Windows" in sees a list of all the drivers. I attempt to install all of them, it goes through them all. At the end of it it still doesn't work.
The next: Windows 7 USB/DVD Download tool. I read it would work, so I attempted it, and it didn't.
I've also read BIOS, "Disable AHCI mode for your disk controller in the system BIOS", I'm not the greatest so I may not have gotten this step right, but the only time I found AHCI in the BIOS I couldn't change it to IDE or ATA as was suggested, I could only change it to "Compatibility"
Thank you for your help, I hope I don't sound too hopeless.

>I found AHCI in the BIOS I couldn't change it to IDE or ATA as was suggested, I could only change it to "Compatibility"
This is right.. you can switch the SATA mode to AHCI or compatible mode.
In AHCI mode the notebook requires the SATA driver in order to see the HDD or SSD drive. In compatible mode the HDD/SSD drive should be visible while system installation but the HDD/SSD drive would operate in IDE mode means the HDD/SSD drive would be slower.
But as I understood the posting, youve got problems with CD/DVD drive. Is this correct?
This really strange because the Windows Setup doesnt need any ODD (optical disk drive) drivers the installation setup contains common CD/DVD drive which controls the disk drive.
I read in other forums that this problem could be related to faulty Windows installation disk. It would be interesting to know if you can use another disk to install the system
I found also this MS knowledge base article:
[A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows|http://support.microsoft.com/kb/2755139]
The reasons for that might be:
The installation DVD is removed during the setup process.
A low-quality DVD was used to create the installation DVD.
The speed at which the installation DVD was burned was too fast.
The DVD drive cannot read the media.
The ISO file is corrupted.

Drive error when installing Mountain Lion

I just downloaded Mountain Lion to my Macbook Pro. The install repaired because of an error on the internal drive. Disk Utility will not repair the drive, repair remains greyed out. I have a Time Machine back up, but Disk Utility won't designate a destination disk. So currently, I can access OS X Utilities and through that Safari - that is all.
The errors on Verify are :
Bad hard link creation date.
Hard link record has data extents.
Incorrect number of file hard links.
I dont't have a recovery disc - I downloaded Lion and Mountain Lion. Mountain Lion, as described above, did not complete loading.
Thanks

the app store policy is no refunds, but you can try: http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store

JDBC Driver errors after installing Security Update 04-2007

After installing the latest security update for 10.4.9, My JDBC driver is no longer working. I'm running PHP & Mysql as a localhost for dev and I know that both are running but are not speaking to each other. I use SQL4X Manager to manage my DB and that can't access MySql. I have the same set up at work with out the security update installed and everything is working great which let me to believe that the security update muck'd something up. Anyone else have the same problem?

Can't help with the airport problem, since I don't do wireless. As for backing up, these should get you pointed in the right direction:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
Since you're a newcomer to the Mac, peruse these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac, and
MacTips Learning Centre.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Error while starting the Oracle BI Server

Hi ,
I am getting the services.msc error while starting the Oracle BI Server as -
Error handling the control request.
Please help me out ..
Thanks and Regards ,

It is actually Windows services error that I am facing ....
while starting the BI server after making any changes to NQS config file ..
Could not start the Oracle BI Server service on Local Computer
Error 1064: An exception occured in the service when handling the control request
Message was edited by:
user460211
Message was edited by:
user460211

Oracle VM Server 3.0.2 driver errors on install

Similar Messages

Maybe you are looking for