Oracle VM Server Installation Issues
The Oracle VM Server 2.2.1 installation hangs after I pick US keyboard and does nothing after. I’ve tried other options including an old version of VM Server and I receive an error that states "isw: untested metadata version 1.2.04 found on /dev/sda", although the installation hangs in the same place. I’m not sure what the issue is and need some help.
Also, just as a test, I installed Oracle Enterprise Linux R5-U5-Server on the hardware without any issues. I see everything, and it is a nice OS.
Hardware details:
I had Fry’s build a U4 server.
Six 300 GB 10k rpm SATA on a raid 5 stripe
Two 1.8 TB 7200 rpm SATA on a raid 0 mirror
Motherboard GIGABYTE GA-X58A-UD3R
24GB of DDR3 memory
Intel Core i7-980X 3.33 GHX 12MB 6Core processor 64Bit
Thanks for any help!!
Robert
[email protected]
In order to get your HDs detected you will need to create a driver disk. Check this link out so you can create one.
http://www.redhat.com/docs/manuals/linux/RHL-8.0-Manual/install-guide/ch-driverdisk.html
What the driver disk will do is load the driver disk image you need, and once you do that it should auto detect your drives.
This should at least get you headed in the right direction :)
Of course steps before creating the driver disk you will need to find out what driver you require and get a driver disk image of that driver to load to your bootable floppy/usb. In the example page they use a floppy, but any bootable media will work.
Good luck,
Roger.
Similar Messages
-
Oracle access server installation issue
is oracle identity management infrastructure 10.1.4.0.1 is compatible with i oracle access management identity server and web pass 10.1.4.3.0
reply asap
Edited by: Aditya on Jun 7, 2011 11:44 AMHey Aditya,
I can see it in this document below:
1-http://www.google.com/url?sa=t&source=web&cd=1&ved=0CBkQFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fdownloads%2Foracle-accessmgr-10gr3-certmatrix-132000.xls&rct=j&q=certification%20matrix%20oam%2010.1.4.3&ei=7SbuTcK5AeLV0QHjm8SRCA&usg=AFQjCNEmg3xQgbQpEdItzo-tOcgMR_xSDA&cad=rja
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g (10.1.2.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g (10.1.3.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g Single Sign-On (10.1.2.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
-->Oracle Access Manager (OAM) 10.1.4.0.1+ Oracle Oracle Application Server 10g Single Sign-On (10.1.4.x) n/a 32 Integration available on all supported platforms n/a n/a More details could be found under http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
2-http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10356/osso.htm#CEGCEAJI
3-You can also go to metalink and research in certification tab more details there.
I hope this helps.
Thiago Leoncio Guimaraes -
Oracle 11g Server Installation and Configuration
Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank youHi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein -
Listner issues in Oracle 11g server installation
Hi,
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.
Listener and TNSnames.ora files are fine. But I am not able to connect through Oracle client machine. it shows 'TNS: Could not resolve the service name'.
When I check the listener status on the server, it shows the service ABBPROD is READY, but still not able to connect through client machine. I have gone through many similar threads and tried out the solutions provided but the problem still exists. Few of the things I tried are as below.
1. I have tried changing the ORACLE_SID and setting the $ORACLE_HOME parameter.
2. Tried replacing the HOST as 'localhost' to system IP address/computer name
3. Listener stop and start
4. Service stop and start
5. Checked the firewall settings of the server machine
I shall paste the listener.ora and tnsnames.ora files below.
LISTENET.ORA
# listener.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = ABBPROD)
(ORACLE_HOME = C:\app\INSAJEN\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\INSAJEN\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\INSAJEN
TNSNAMES.ora file
# tnsnames.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ABBPROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.233.130)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = abbprod)
LISTENER_ABBPROD =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SQLNET.ORA
# sqlnet.ora Network Configuration File: C:\app\INSAJEN\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)Please help me to debug and resolve the problem. If any more information is required, please let me knowSBH wrote:
I checked the global_name, it is ABBPROD.asiapacific.abb.com...
I tried setting the ORACLE_SID same as this name, but still the same issue exists
@Mahir, this is a production environment, and I cannot take risk of rebuilding tnsnames and listener.ora filesand
I am facing problem while connecting to Oracle 11g server on 'Windows 7 Enterprise edition - 32 bit OS'.
I have successfully installed Oracle 11g server on Windows & enterprise machine.Your production sever running on Windows 7 EE 32bit? -
Oracle Application server related issue
My application is developed using Oracle Developer suite 10g (10.1.2.0.2 ) and deployed in Oracle Application Server 10g R2 (10.1.2.0.2) in windows 2003 32 bit and its working fine.
My issue is as follows
1. Since Oracle Application Server 10g R2 (10.1.2.0.2) is not supported in windows 2008 64 bit, pls advise what version of Application Server 10g i should use. Please note that my
programs are developed using Oracle Developer suite 10g (10.1.2.0.2 ).
2. If i want to move to next development version (ie forms / Reports 11g) , which version of application server should i use.
JoeThe 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :) -
Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 14-AUG-2013 19:33:07
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
(ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:19 refused:0 state:ready
LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks. -
Oracle VM OEL Installation issue
Hi Team,
I have a new laptop with Windows 8. I am trying to setup the Oracle environment using Oracle Virtual Box. I have downloaded the part numbers V33411-01 (boot) and V33412-01 (Linux). The boot CD boots the server without issues and after few installation steps it prompts for Linux CD. When I insert the same, I get the error “The oracle linux server disc was not found in any of your cd rom drives.”
When I try to do a media check for the second CD, I get the error “unable to find the checksum in the image. This probably means the disc was created without adding the checksum.”
I tried to install using the second CD directly but it fails as the CD is not bootable. Can you please help me in fixing this issue?
Regards,
AntonyI don't know exactly what you're trying to do.... but all the installation media for OEL are bootable. I don't why you would have just a "boot" media that would require you to load a second disk... Unless you are using the CD installation and not the DVD iso. Why not just download the DVD iso?
Edited by: user12273962 on Jan 21, 2013 5:59 AM -
Not able to create a Volume Group in the oracle VM server installation
Hi,
I am installing Oracle VM server. In the installtion ( Partition time ), i click on create custom layout and i want to create a / partition as a logical volumn under volume group. But there is no option to create a Volume group actually. So can anybody help how to create a volume group actually and how to create a logical volume under volume group.user10274248 wrote:
So can anybody help how to create a volume group actually and how to create a logical volume under volume group.LVM is not recommended in Dom0, which is why support for LVM has been removed from the installer. LVM is not cluster aware and does not support write barriers, both of which are important for a filesystem that is used for storing file-backed disk images. -
Oracle Application Server Install Issue
Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
SheikThe 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :) -
Oracle BPEL server installation - Infrastructure requirement
I am trying to check the feasibility analysis of infrastructure / Hardware required for installation of Oracle BPEL process engine.
We have a separate database server and Application server.
DB server and App server config details are :
2 HP RP 3440 Servers with PA-RISC2.0 with
8GB of RAM.
Oracle 10g database is present in DB server.
Oracle Application server 10g is present in the Apps server.
If we want to install Oracle BPEL server in OracleAS Middle Tier architecture, should we install Oracle BPEL process manager in a separate server or can we install in one of the existing DB or Apps server.
Please help me on this.
Gopi.I am trying to check the feasibility analysis of infrastructure / Hardware required for installation of Oracle BPEL process engine.
We have a separate database server and Application server.
DB server and App server config details are :
2 HP RP 3440 Servers with PA-RISC2.0 with
8GB of RAM.
Oracle 10g database is present in DB server.
Oracle Application server 10g is present in the Apps server.
If we want to install Oracle BPEL server in OracleAS Middle Tier architecture, should we install Oracle BPEL process manager in a separate server or can we install in one of the existing DB or Apps server.
Please help me on this.
Gopi. -
Oracle PIM Sync installation issues
We have experienced the PIM Sync installation issue where the client couldn't detect Outlook. We have several work stations downloaded the file and only one station has installed it successfully. We even tried to use the file that worked on that station to install into the ones that didn't work. However, we got no luck. Some of us had "Cannot Connect to Oultook" and some of us had error code - 0x083200006. Does someone have the same issue? We submitted a SR to Oracle Customer Care but haven't heard anything from them yet. We are hoping this got resloved as soon as possible. thanks!
In reference to you PIM Sync issue you did the took the correct action by contacting CRM On Demand customer care and submitting a SR.
-
Oracle EBS 11i Installation issues
Dear All,
I am trying to install Oracle EBS 11i on Redhat Enterprise Linux 4.5
[oracle@machine1 /]$ cd /Stage11i/startCD/Disk1/rapidwiz/
[oracle@machine1 rapidwiz]$ ./rapidwiz
Note: i have started the installation logged as user oracle which is member of groups oinstall and dba
the installatio starts without warning but suddenly installation aborted by giving the message check the log
/u01/oracle/proddb/9.2.0/appsutil/log/PROD-macnine1/021804050.log to see the errors
when i checked the specified log file ,some errors found here described below
runProcess_6
Statusstring Executing Command: adlnkoh.sh
adlnkoh.sh started at Mon Feb 18 18:32:18 UZT 2008
logfile located in /u01/oracle/proddb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command -
/u01/oracle/proddb/9.2.0/temp/PROD_machine1/adrun9i.sh APPS APPS
/u01/oracle/proddb/9.2.0/appsutil/install/adlnkoh.sh: line 198:
/u01/oracle/proddb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file
for details.
and when i check the log file /u01/oracle/proddb/9.2.0/install/make.log
many errors found like these
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
mv /u01/oracle/proddb/9.2.0/rdbms/lib/oracle
/u01/oracle/proddb/9.2.0/bin/oraclemv: cannot stat
`/u01/oracle/proddb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/oracle/proddb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
The user Oracle (by which installation is in progress) has all privileges on base directory /u01 (used for 11i install)
Here is the permissions for both directoried Stage11i and /u01
Code: Select all
drwxr-xr-x 7 root root 4096 Feb 15 13:03 Stage11i
drwxr-xr-x 3 oracle oinstall 4096 Feb 18 17:05 u01Now i had started the installation again and once again unable to do this
i had seen the errors while checking the logfile created during installation
Statusstring Creating the database controlfile...
adcrdb.sh started at Fri Feb 22 21:37:23 UZT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/testdb/9.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u01/oracle/testdb/9.2.0/Apache/perl/bin:/u01/oracle/testdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/testdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /u01/oracle/testdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/testdb/9.2.0/ctx/lib
Executable : /u01/oracle/testdb/9.2.0/bin/sqlplus
The log information will be written to
/u01/oracle/testdb/9.2.0/appsutil/log/TEST_machine1/adcrdb_TEST.txt
Creating the control file for TEST_machine1 database ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:37:33 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000 blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
exit_code=1
Checking for errors ...
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
ORA-01507: database not mounted
ORA-00205: error in identifying controlfile, check alert log for more info
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:39:16 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Cannot create control file for TEST
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for TEST instance -
Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit
Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
VinayHi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay -
Oracle 11g R2 installation issue on HP UX 11.2
Friends,
I am facing issue in HP UX 11.3 server when installaing 11G R2 database .It is not activating Keyboard as a result i could not edit in the option box /not able to enter db name/enter password and so on in Graphcal mode for installation.
Could you please let me know what could be the issue.
Thanks
RockyHi,
Problem could be with your GUI on HP UNIX. Are you using X Manager or what for having the GUI? You might need to check HP UNIX side instead of oracle side to have GUI work ok for you
Salman -
Oracle Content Management installation issue--apr_bucket_type_pipe
Hi all,
i have intalled Content Server according to the installation guide
Content Server Port :5000
Admin Server Port:5001
Web Server Root :idc
Web Server:Apache
then enter the following entries in httpd.conf file
LoadModule IdcApacheAuth /app/ucm/server/shared/os/linux/lib/IdcApache2Auth.so
IdcUserDB Stellent "app/ucm/server/data/users/userdb.txt"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
<Location>
Then i restart my IAS (./opmnctl startall) and system prompts my that undefined symbol :apr_bucket_type_pipe .
My IAS version is 10.1.3.1.0 .
Do you have any idea ?
Thanks,
DennisHi
The last <Location> tag should be </Location>.
The correct config entry in your case would be :
LoadModule IdcApacheAuth /app/ucm/server/shared/os/linux/lib/IdcApache2Auth.so
IdcUserDB idc "app/ucm/server/data/users/userdb.txt"
Alias /idc "/app/ucm/server/weblayout"
<Location /idc>
Order allow,deny
Allow from all
DirectoryIndex portal.htm
IdcSecurity idc
</Location>
Make these change , restart the webserver and then test to see if the issue persists.
Also the apache webserver is 2.0 as per your LoadModule entry. If it is 2.2 then that entry should be LoadModule IdcApacheAuth D:/oracle/ucm/ots/shared/os/win32/lib/IdcApache22Auth.dll
Thanks
Srinath
Edited by: srinathmenon on Jul 7, 2009 11:15 AM
Maybe you are looking for
-
Server resources availability while executing a query
hi, lets say we have a query that requires XX MB to be executed. the needed memory is available, and while the query is getting memory, another threads jump on the database, and the memory needed to execute the query is not available. under those cir
-
I'm new to DNS I wrote the below script and I'm getting Ora-01008: not all variables bound, my problem is with the C bind variable DECLARE C NUMBER (3); BEGIN statement := 'SELECT ' || 'COUNT(*) ' || ' INTO '||C|| ' FROM TAB' ; DBMS_OUTPUT.PUT_LINE (
-
Photoshop Elements 9 won't update online
It was working fine but now I am getting the message 'The update server is not responding, the server may be temporarily offline or the internet or firewall settings may be incorrect' I have been getting this message for 3 days?
-
hi i am trying to print some text with applet but it is not working here is my code sMsg="printing a applet is tough job"; // Find the default service DocFlavor flavor = DocFlavor.BYTE_ARRAY.AUTOSENSE; PrintService service[]= PrintServiceLookup.looku
-
VMware Fusion and Windows Vista
I've installed fusion and vista for work purposes, but now it is restore state and the only way to turn it off is to hold power button down until entire computer shuts off. If I open fusion it automatically begins restoring the "frozen" vista. I have