Oracle VM: Sun server x3-2 with Sun Storage 2540 M2

Hello Everyone!
Currently, we are planning to implement a project about Visualization using Oracle VM.
As the Sun Storage 2540 M2 uses FC channel to share its luns from storage, we are not sure on how to discover those share storage luns to be use in Oracle VM manager and Oracle VM Server.
So, could you please help guide us, give us some recommendations, or instruction documents to the issue above?
Thank so much in advance!
Regard,
Dara

Hmm, server is not (auto?)discovered
though machines can see each other via network, all ports are opened, but agent still reports
[2011-07-28 21:07:32 6001] DEBUG (OVSNotificationServer:233) NOTIFICATION SERVER STARTED
[2011-07-28 21:07:32 6005] INFO (OVSRemaster:101) REMASTER SERVER STARTED
[2011-07-28 21:07:32 6009] INFO (OVSMonitor:29) MONITOR SERVER STARTED
[2011-07-28 21:07:32 6013] INFO (OVSHA:103) HA SERVER STARTED
[2011-07-28 21:07:33 6017] INFO (OVSStat:234) STAT SERVER STARTED
[2011-07-28 21:07:33 6021] INFO (OVSAgentServer:274) OVSAgentServer start serving!
[2011-07-28 21:07:33 6021] INFO (OVSAgentServer:275) Oracle VM Server version: {'release': '3.0.2', 'date': '201109270901', 'build': '75'}
[2011-07-28 21:07:37 6009] DEBUG (OVSMonitor:46) Cluster state changed from [Unknown] to [Offline]
[2011-07-28 21:07:37 6009] DEBUG (OVSMonitor:50) Error sending notification: Cannot get manager URL from agent db.
[2011-08-14 23:30:58 13993] DEBUG (agtctl:95) master flag: None
A slight off-subject question, do I need to run anything on OVM (apart from setting on all servers the same password)?

Similar Messages

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?
Where can I check compatibility matrix?

matthew_morris wrote:
This forum is about Oracle professional certifications (i.e. "Oracle Database 12c Administrator Certified Professional"), not about certifying product compatibility.
I concur with Matthew. The release notes for sun cluster and oracle for solaris might tell you. oracle 9.2.0.8 is out of support on solaris and I recall needing a number of patches to get it to a fit state ... and that is without considering sun cluster. Extended support for 9.2.0.8 ended about 4 years ago ... this is not a combination I would currently be touching with a bargepole! You are best to seek on MOS.

Integration of Sun One Web Server 6.0 with Sun One App Server 7.0

Is it possible to integrate Sun One Web Server 6.0 with the Sun One App Server 7.0??
Sun One App Server 7.0 comes with the in-built HTTP listener. But we want to know if there is a way by which we can use the Sun One Web Server 6.0 with the App Server 7.0 and not the in-bulit HTTP listener?

As suggested by you, I have used Sun ONE Application Server 7's plugin to connect the Sun ONE Web Server 6.0 with Sun ONE Application Server 7 as per the information given in Sun ONE Application Server 7 Administrator's Guide.
I have added the plugin package to the webserver and added the following into the magnus.conf:
Init fn="load-modules" shlib="C:/iPlanet/Servers/plugins/passthrough/passthrough.dll" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
and to the obj.conf
NameTrans fn="assign-name" from="(/A2P2Test|/A2P2Test/*)" name="passthrough"
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://<application server http listener>"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
The webserver starts up without any errors but never forwards any requests what might I be doing wrong?

Is it possible to run sun studio 12 ide with sun studio 8 compiler?

Hi, i am in the process of evaluating sun studio 12. Our company cannot move to sun studio 12 compiler collection right now as it is a huge code base and it will take us few months even before we start using sun studio 12 compiler in our development environment. Is it possible to use sun studio 12 ide with sun studio 8 compiler collection(CC, dbx etc)? Your feedback is appreciated. thank you.

There are two parts to the answer.
1) whether you can
To choose a compiler set follow Tools->Options->C/C++
and in the BuildTools tab you'll see how it picks up
compilers from your PATH.
This dialog doesn't govern choice of dbx, which will always
come from the installation. However you can alter which dbx
is used by presetting the environment variable SPRO_DBX_PATH
to teh full pathname of a dbx of your choice.
2) whether you should
The IDE should work reasonably well with older compilers. They
are not that tightly bound.
The IDE will not work well enough with an older dbx, especially as
old as studio 8. However, while not officially supported or tested
the SS12 dbx should be reasonably bwd compatible with code
generated from older compilers.
So my recommendation is: don't use SPRO_DBX_PATH and
give the old compilers a try.

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

Netscape Directory Server 4.x with sun blueprints script - still no luck

I installed the directory server 4.x, ran suns NATIVE ldap script for Solaris 8. I don't think it generated the "Solaris Native" profile. . how can I tell. When I go to ldapclient a client machine, I get the following:
parsing -P option
findDN: begins
findDN: calling __ns_ldap_default_config()
found 2 namingcontexts
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject)(nisdomain=carfund.com))"
rootDN[0] dc=carfund,dc=com
found baseDN dc=carfund,dc=com for domain carfund.com
Servers addresses 172.16.100.233
About to configure machine by downloading a profile
save sysinfo
save stat(/etc/nsswitch.conf,
save /usr/sbin/nscd -K
save /usr/bin/pkill -9 nscd
save rename(/etc/nsswitch.conf, /etc/nsswitch.conf.orig)
save stat(/etc/defaultdomain,
save rename(/etc/defaultdomain, /etc/defaultdomain.orig)
save stat(/etc/.rootkey,
No /etc/.rootkey file!
save stat(/var/nis/NIS_COLD_START,
No /var/nis/NIS_COLD_START file!
namelen 11
save stat(/var/yp/binding/carfund.com,
No /var/yp/binding/carfund.com directory!
download save() of systems configuration suceeded.
download ret 2
download p 0xffbef4c4
download p Object not found
The download of the profile failed, recovering system state.
recover stat(/etc/defaultdomain.orig, )
recover stat(/etc/nsswitch.conf.orig, )
recover open(/etc/defaultdomain.orig, )
recover read(/etc/defaultdomain.orig, )
recover old domainname carfund.com
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/nis/NIS_COLD_START.orig, )
recover stat(/var/yp/binding/carfund.com.orig, )
recover ldap -1 nis+ -1 yp -1
recover rename(/etc/nsswitch.conf.orig, /etc/nsswitch.conf)
recover rename(/etc/defaultdomain.orig, /etc/defaultdomain)
Any ideas?
Thanks,
Gary Walters
FYI .. I really want to use Directory Server 5.1 on my Solaris 8 machine, but can't seem to get it even close.

Followup:
I installed the netscape version of Directory Server and then ran the blueprints script to set it up for native LDAP. I have found a few issues.
1.) I can not log into the console as Directory Manager ... I have to use admin? I think this could be a problem because when it goes to set the permissions for proxyagent, I think it uses the Directory Manager login so when I go to see the permissions it created, I don't see that entry. When I go to create one, it gives me: insuffcient 'write' priveledge to the 'aci' attribute of entry.
2.) I can not generate a profile and use ldapadd to add it, I get the following errors:
ldap_gen_profile -P default -b dc=mydomain,dc=com -D \ "cn=Proxyagent,ou=profile,dc=mydomain,dc=com" -w password \ -a simple xxx.xxx.xxx.xxx > default.ldif
Once that is done, you will have to edit the file and take out all the whitespace at the beginning of every line due to a bug. Once you are ready to add the profile, just run:
ldapadd -D "cn=Directory Manager" -w password -h ldapserver \ -p 389 -f default.ldif
I ran the steps above (substituting correct entries) and when I do the ldapadd -D command, I get the following error:
adding new entry cn=default,ou=profile,dc=carfund,dc=com ldap_add_s: Object class violation
3.) If I try to use ldapclient -v -P command on a client machine, I get the following errors:
/usr/sbin/ldapclient -v -P "Solaris Native" ###.##.###.###
parsing -P option
findDN: begins
findDN: calling __ns_ldap_default_config()
found 2 namingcontexts
findDN: __ns_ldap_list(NULL, "(&(objectclass=nisDomainObject) (nisdomain=carfund.com))" rootDN[0] dc=carfund,dc=com
found baseDN dc=carfund,dc=com for domain carfund.com
Servers addresses ###.##.###.###
About to configure machine by downloading a profile
save sysinfo
save stat(/etc/nsswitch.conf,
save /usr/sbin/nscd -K
save /usr/bin/pkill -9 nscd
save rename(/etc/nsswitch.conf, /etc/nsswitch.conf.orig)
save stat(/etc/defaultdomain,
save rename(/etc/defaultdomain, /etc/defaultdomain.orig)
save stat(/etc/.rootkey,
No /etc/.rootkey file!
save stat(/var/nis/NIS_COLD_START,
No /var/nis/NIS_COLD_START file!
namelen 11
save stat(/var/yp/binding/carfund.com,
No /var/yp/binding/carfund.com directory!
download save() of systems configuration suceeded.
download ret 2
download p 0xffbef4c4
download p Object not found
The download of the profile failed, recovering system state.
recover stat(/etc/defaultdomain.orig, )
recover stat(/etc/nsswitch.conf.orig, )
recover open(/etc/defaultdomain.orig, )
recover read(/etc/defaultdomain.orig, )
recover old domainname carfund.com
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/ldap/ldap_client_file.orig, )
recover stat(/var/nis/NIS_COLD_START.orig, )
recover stat(/var/yp/binding/carfund.com.orig, )
recover ldap -1 nis+ -1 yp -1
recover rename(/etc/nsswitch.conf.orig, /etc/nsswitch.conf)
recover rename(/etc/defaultdomain.orig, /etc/defaultdomain)
Any ideas .. I still want to get Version 5.1 working , but I may have to settle for 4.x since I am not running Solaris 9 and I can't upgrade at this time.

Sun One Web Server 6.0 with Sun One App Server 7.0

Does Sun have a plug-in for enabling Sun One Web Server 6.0 to communicate with the Sun One Application Server 7.0? How to get this plugin?

Yes, it has, and it is shipped with the product. Look at the installation guide and you can find the plugin configuration instructions.
Regards,
Juan

Sun java DIRECTORY SERVER 6.0 WITH SUN OPENSSO 8

Hi all,
I have install the sun java directory server 6.0.
Now I have install the sun openssl ( I could had installed the sun java access manager but i wanna use the sun opensso 8 for SSO).
when created the directory i.e. by using command from directory preparation tool, the directory server stop starting.
It do not start and is asking me the error as follows,
bash-3.00# /var/opt/SUNWdsee/dsins1/start-slapd
[20/Feb/2009:14:44:30 +0500] - ERROR<4131> - Bootstrap config - conn=-1 op=-1 msgId=-1 - System error The entry cn=schema in file /var/opt/SUNWdsee/dsins1/config/schema/99user.ldif is invalid (error 20: Type or value exists) - attribute type sunIdentityServerDiscoEntries: Does not match the OID "1.3.6.1.4.1.42.2.27.9.1.821". Another attribute type is already using the name or OID..
[20/Feb/2009:14:44:30 +0500] - ERROR<4129> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error Please edit the configuration file to correct the reported problems and then restart the server. Server exiting.
Server not running!! Failed to start ns-slapd process.
Note: while preparing the directory (sun java directory preparation tool) I mentioned the schema 2 i.e. ACCESS MANAGER, because sun opensso 8 is the latest version for Sun java access manager ?
Any help??????????????
Regards
Adeel

Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
# cd /var/opt/SUNWdsee/dsins1/config/schema
# grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
Edited by: etst123 on Mar 3, 2009 1:28 PM

Oracle RAC on Sun server.

Hello Oracle RAC gurus,
I have below questions, I would highly appreciate if anyone can answer these.
1) Is it must to have identical server model and configuartion for Oracle RAC?
2) I have Sun Fire 280R machine with Sun solaris 10. Can I install Oracle RAC on this
using Oracle VMWare?
3) Please let me know below scenario is possible or not,
If I have Oracle Databases(single instances) are running on my Sun server box, can I
use this machine as primary node for Oracle RAC? If this is not possible then
can I use as secondary node?
Thanks gurus.

For 1: NO, the hardware does not need to be exactly the same. The nodes can be different models, with different CPU speed and different RAM sizes. The only consideration is that they must be the same O/S. This is a hardware vendor issue. They determine which configurations they are willing to support.
For 2: RAC is currently not supported in Oracle VM.
For 3: YES, at first glance you can do this. Note that the RAC database requires a cluster database home. Thus, you would need to install a cluster database home in addition to the Single Instance database home(s). However, this answer does not consider whether or not your node would be capable of hosting another database instance in regards to performance.
Thanks.

Client_host('cmd edit c:\temp\file_print.txt'); not working with Sun JRE6

Hi,
I am working on Oracle forms10g ( 10.1.2.0) with Sun JRE6 (Using JRE version 1.6.0_31-b05) which is working fine. the only problem is, when I use edit command, its not working nor show any error. Command I am using (to display the text file in command window) - client_host('cmd edit c:\temp\file_print.txt'); . the same command working fine if I switch to JInitiator (1.3).
help would be greatly appreciated.
Thank you.
Alok

In the [webutil] section of the formsweb.cfg, did you change the baseHTMLjinitiator to point to webutiljpi.htm?
not working nor show any error. Not all errors will be reported through the Forms UI. For java related errors you have to look at the Java Console. Please check the Java Console and post any errors listed there.
the same command working fine if I switch to JInitiator (1.3).This tells me the problem is most likely a configuration issue. Please list what steps you took to congifure your system to use the JRE over the default Oracle Jinitiator.
Craig...

HOw to configure iSCSI remote boot on a SUN Server

For virtualization I need to use iSCSI remote boot from the SUN Server X2270 to a Disc Storage!
I've installed the "Intel® Gigabit ET Dual-Port Server Adapters" into this server.
During the boot time, I didn't see the message "Press <Ctrl-D> to ru setup..." or any message about "Intel iSCSI Remote Boot"! It is like the machine didn't see this Intel Card...
I didn't known any more what to do? as anyone an Idea about this problem?
Regards,
nm

Log into the global zone and run :
# shutdown -y -g0 -is
This should bring down the global zone to su mode and halt the other zones (notice Halt)
However I believe there is a bug presently where this does not always happen and you are still able to telnet to the local zones.
Local zone admin could always run zoneadm -z <zone-name> halt on each zone (notice halt not single-user).
Once global zone in in single-user mode install the patch as normal, when the global is done it will bring up each local zone to single-user mode to add the patch too.
118833-36 may need patch add and -G option as this patch also has been experiencing some issues, in which case I believe you would need to do the patch add process on each zone manually
Once the global zone is brought back up again it should bring up the local zones as well.
Let us know if you experience the locals not being halted as mentioned above and need to do it manually.

Can I install Portal server 6.1 with Directory server 5.2

Hi,
Can I install Sun ONE Portal Server 6.1 with Sun ONE Directory Server 5.2 that is an existing installation? I have checked iPS 6.1 installation guide that mentioned iDS version should be 5.1.
Thanks a lot,
Yu Mao

Identity server 6.0 SPx has not been certified/tested on DS 5.2.
IS 6.1 will support DS 5.2.

Can NOT restart Oracle BI Presentation Server on Windows XP

Oracle BI server 10.1.3.4.1 installed in Windows XP.
I stop the Oracle BI Presentation server and Oracle BI server for some reason, and restart them. BI server start sucessfully, but Oracle BI Presentation server restart failed.
Here is message I got.
Windows could not start Oracle BI Presentation server on the local computer. For more information, review the system event log. If the service is non-Microsoft
service, contact the service vendor, and refer to service-specific error
code -1.
Here is message form system event log:
The Oracle BI Presentation Server service terminated with service-specific
error 4294967295 (0xFFFFFFFF).
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

I fixed the problem. I forgot </CatalogPath> in c:\OracleBIData\web\config\instanceconfig.xml
<CatalogPath>C:/OracleBIData/web/catalog/sh</CatalogPath>

Oracle VM 3 with SUN SERVER X3

Dear All Experts,
Is it possible to run Oracle VM 3 with SUN SERVER X3 has only 2 hard disks using local storage?
If can, how to do it? please kindly share this experience?
Thanks and regards,
Vandy

Booting to a USB-thumb-drive won't be a redundant OS mirror but that sounds like a good idea & that would be one way to do it. Solid State USB drives are likely more reliable than HDD but they do also fail (or maybe wear out & become read-only). Worst case you hopefully could just reinstall the OS on a new USB and your data would still be recoverable.
Speaking of adding disks, if the BIOS/MB supports it you may also be able to add a USB-3.0 HDD. USB-2.0 may also be an option but would be slower. For my Dev environment I added multiple USB-3.0 7200rpm 4TB drives and they give me some piece of mind and provide decent performance for backups for my Dev environment (I clone to them to give extra layer of back up).
I don't know if you can mirror 2 USB drives nor have I tried removing them and rotating them but both might be options (haven't though much about nor tried to do either yet).

Oracle JDeveloper 10g with Sun Java App server

I have oracle JDeveloeper 10g and sun App Server 8. I want to find out if JDeveloper can create entity beans that can run on Sun app server.
I know that sun app server uses things like sun-cmp-mapping.xml and sun-ejb-jar.xml. If i create these as normal in JDeveloper would they run on sun app server? if not what configuration do i need to do?

Sun Java App Server 8 doesn't ship with the Apache Tomcat jk/jk2 connector. But you can download Tomcat 5 and install it. Copy ${catalina_home}/server/lib/tomcat-jk2.jar under $s1as_home}/lib
Now Sun Java App Server 8 will have the code required. Then you will need to start the jk connector (this is the most difficult task). Since you don't have any API to start this connector to listen (in Tomcat, the connector is started by default and listen on port 8009), the only way for you to start it is to use JMX. Pick one of the available JMX client ( jmx-ri is a good candidate), and do:
(1) create the connector
(2) start the connector
Then follow the Jakarta Tomcat instruction on how to install Apache and JK2.
I didn't spend the time to find the exact command for JMX, but technically it should work. Once I have time I will take a look (The Tomcat 5 Admin Gui uses JMX, so by browing the code you should find the exact JMX command)
Hope that help.
-- Jeanfrancois

Oracle VM: Sun server x3-2 with Sun Storage 2540 M2

Similar Messages

Maybe you are looking for