Oracle VM VirtualBox Install

I have dowloaded Oracle VM VirtualBox 4.1.8 Setup. When Installing I get the message
The software you are installing has not passed Windows Logo testing to verify its compatability with Windows XP.
This software will not be installed. Contact your system administrator.
They were not familiar with this message and told me to contact ORACLE?
Thanks

user5103536 wrote:
The software you are installing has not passed Windows Logo testing to verify its compatability with Windows XP.
This software will not be installed. Contact your system administrator.You need to ask your System Administrators to allow you to install non-Logo Certified software on your workstation. This is a Windows configuration issue.

Similar Messages

Machine configuration for installing oracle in VirtualBox

Hi,
Please suggest me required hardware configuration to install oracle application 12.1.3 in LAPTOP through oracle in VirtualBox.
Thanks
Suresh

Please see (How Determine The Hardware Specification : CPU, DISK, RAM (Memory) For E-Business R12.1.x Installation? (Doc ID 789438.1)).
R12 requires at least 4 GB of RAM. The total space required for a standard system (not including the stage area) is 85 GB for a fresh install with a production database, and 233 GB for a fresh install with a Vision Demo database. You will need at least 47 GB to accommodate the file system and database files in the stage area directory.
http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699i4773.htm
Please also see previous threads which discuss the same topic.
https://forums.oracle.com/search.jspa?view=content&q=hardware+AND+configuration+AND+R12
https://forums.oracle.com/search.jspa?view=content&q=hardware+AND+requirements+AND+R12
Thanks,
Hussein

Virtualbox - Installed VM will not start

Hi,
although I'm satisfied Arch user for quite long time, this is the first time I feel need to ask on this forum. So, please, bear with me
I followed installation instructions on Arch wiki:
pacman -S virtualbox-host-modules virtualbox
modprobe vboxdrv
Since I am using stock kernel, this should be sufficient (according to the guide). Then I ran virtualbox, successfully installed Ubuntu 64-bit and rebooted VM. All went ok. However, after turning the VM off, I am not able to turn it on again - VBox freezes after showing two "Starting mirtual machine" dialogues, similarly as in this post. No dmesg output, vbox log here. I tried this process several times, strangely, sometimes the system booted, but mostly I got stuck again.
My system is 64-bit Intel, package versions:
linux 3.15.8-1
virtualbox 4.3.14-3
virtualbox-host-modules 4.3.14-3
Not sure if its important, but I chose 2 GB RAM and 20 GB HDD space for VM.
Last edited by dooku (2014-08-08 06:22:07)

I have the same problem. I am using virtualbox_4.1.8_OSE. I followed the arch wiki on phpvirtualbox. As suggested I also used the Conf file and rc script from PUEL edition in AUR. But it fails.
~]$ vboxwebsrv -b --logfile /var/log/vboxweb.log --pidfile /var/run/vbox/vboxwebsrv.pid --host 192.168.1.100
Oracle VM VirtualBox web service version 4.1.8_OSE
(C) 2005-2011 Oracle Corporation
All rights reserved.
VirtualBox web service 4.1.8_OSE r75467 linux.amd64 (Dec 19 2011 17:58:34) release log
00:00:00.000 main Log opened 2011-12-28T01:02:00.383082000Z
00:00:00.000 main OS Product: Linux
00:00:00.000 main OS Release: 3.1.5-1-ARCH
00:00:00.000 main OS Version: #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
00:00:00.000 main OS Service Pack: #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
00:00:00.000 main Executable: /usr/lib/virtualbox/vboxwebsrv
00:00:00.000 main Process ID: 1375
00:00:00.000 main Package type: LINUX_64BITS_GENERIC (OSE)
vboxwebsrv: error: failed to daemonize, rc=VERR_FILE_NOT_FOUND. exiting.
and
sudo /etc/rc.d/vboxweb start
Password:
:: Starting VirtualBox Web Service [FAIL]

Problem starting Weblogic/SOA Server on Oracle VM VirtualBox

Hi,
I have installed Oracle VM VirtualBox on a Windows 7 Home Premium 64 bit Toshiba Laptop with 6G RAM. I then imported the Pre-built VM for SOA Suite available at http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html. The VM start ok and the desktop gets displayed with icons. Now when I try to start the Weblogic server using the desktop icon, it hangs with log files indicating that host operating system has a RAM issue, although I have 6G RAM as mentioned above. Can someone help with this?
Regards,
-Irshad.

Hi, Make sure you have allocated atleast 2 gb memory to the VM .

Has anyone tried ORACLE VM VIRTUALBOX?

I have just come across this application after I downloaded "Open Office" from Oracle, a free Office Suite. I sounds like this "VirtualBox" is like parallel desktops, but for many diffeent OS's besides Windows. Here is the website: http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html
DESCRIPTION:
MORE ABOUT ORACLE VM VIRTUALBOX
Multiple operating systems on one desktop
Cross-platform guests and hosts including Windows, Linux, and Oracle Solaris, and Mac OS X as a host
Teleportation of running virtual machines between hosts without interruption
High performance
Support for massive workloads of up to 32 virtual CPUs
OVF format support

As others have said, it has been around for years. I used it to run Windows XP in both Tiger and Leopard, but when I upgraded to Snow Leopard the then current version of Virtual Box was not ready for the new Mac system, so I never installed it.
It worked fine, once it got set-up properly, but setting it up was not exactly easy. Like many open source applications it was a bit non-intuitive for a Mac user, and the directions were not particularly clear. I believe it took several weeks before everything was working the way I wanted (to be fair, I did want to set it up in a slightly non-standard way).
Francine
Francine
Schwieder

Oracle VM VirtualBox isn't running since OS X 10.9.4 Mavericks last update

Hi
MacBook Air, 1.7 GHz intel Core i5
4GB 1333 MHz DDR3
Made the the latest OS X 10.9.4 update, since then, Oracle VM VirtualBox isn't running.
Any suggestions?

Contact the developers for tech support. This is not an Apple product. Be sure you have the latest version installed.

Oracle win 11gr2 install in Windows 7 environment

I installed oracle 11gr2, the installation went very well. I could login to sql plus created tables and query the database.
Only one thing i see is different than past installations is that oracle files are installed in c:\app\userid\ admin... and other files in that path.
My experience in the past is to define oracle hone and files are found there.
is it going to be a problem when I use third party tools like erwin, toad etc.
how do i fix the problem. I tried to connect to the database thru erwin and had problem.
Thank you
j

C:\Users\sidhwaneyj>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 28-JUN-2012 09:46
:06
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 28-JUN-2012 08:08:35
Uptime 0 days 1 hr. 37 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\sidhwaneyj\product\11.2.0\dbhome_2\network\admi
n\listener.ora
C:\Users\sidhwaneyj>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 28-JUN-2012 09:47
:58
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:135 refused:0 state:ready
LOCAL SERVER
Service "orclXDB.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IJET394, pid: 3640>
(ADDRESS=(PROTOCOL=tcp)(HOST=IJET394.ijetcorp.com)(PORT=49207))
The command completed successfully
Listener Log File c:\app\sidhwaneyj\diag\tnslsnr\IJET394\listener\alert\
log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully

Oracle Text in installing Oracle 10g without licence!!

Hi. Everyone.
I've read some thread , but I am still confused about "oracle text".
Now, I am testing oracle10g database.
I downloaded 10g software from www.oracle.com, and installed it sucessfully
on windows xp.
When I was trying to import a dump file from oracle9i to
the unlicenced oracle10g database, I got the error , IMP-00017, which
is related to "Oracle Text".
I checked "dba_users" dictionary, but ctxsys user is locked and expired.
I read some thread on this site, and according to the advice, I tried to
enable oracle text, using "DBCA".
However, every database option on DBCA is disabled, I was not able to
check oracle text.
Lastly, how can I enable "Oracle Text" with unlicenced oracle 10g ?
Is this possible without licence?
I am very confused about this.
I am looking forward to hear your experience and advices.
Have a nice day.
Best Regards.
Ho.

Well, instead of being confused, you could go to http://www.oracle.com/pls/db102/portal.portal_db?selected=1 and look at
1) the licensing document, which would tell you whether you need a separate license, and
2) under the 'Books' tab, look at the Text Application Developer's Guide or the Text Reference manuals for details.
You could also look for the Oracle Text forum (from the http://forums.oracle.com page, under Database - More, or Text and ask the people who concentrate on that set of features.
In general, Oracle Text is a set of extensions, the definitions for which are stored under user ctxsys. You would use these extensions by creating your own objects that are based on the extensions.
For example, suppose your tables contain varchar2 columns. Create indexes that are based on ctxsys's 'context index type' and your application can then use the 'CONTAINS' keyword search capability (which is effectively a ctxsys-owned extension to the select)
However, you would never log on to ctxsys and do anythibng with that as you risk changing the template code that Oracle has supplied.
Message was edited by:
Hans Forbrich
PS: Yes, Oracle Text is included as part of the base database. Most of it is even included in the free Oracle XE database.

Oracle 10g not installing successfully in Windows Vista.

Dear Gurus,
Last week I bought a HP Pavlion Laptop with Windows Vista Operating System. Yesterday I tried to install Oracle 10g Database in it but got some errors during the installation and also it is not successfully installed. Even though there is no problem with the Software.
Please tell me whether Oracle 10g is supported in Windows Vista. If not what is the version of Oracle should I install. I urgently need Oracle Database to be installed in my Laptop, please suggest what can be done.
Thank you.
With Kind Regards,
Senthil Alagu .P.

You may be interested in reading Oracle on Vista: Statement of Direction on the topic.
Incidentally, which version of Vista is it? Oracle tend to only support the professional/business editions of Windows.
Cheers, APC

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

Oracle 10g r2 install in Fedora 13

Hi all,
I am a new Fedora guy. I get trouble to install Oracle 10g r2 in Fedora 13.
The following is error message:
[oracle@localhost database]$ ./runInstaller
./runInstaller: /home/oracle/software/database/install/.oui: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
Who can help me? Please give me detail guide.
Thanks!

Hi,
Seems a problem related to your glibc install. Are you sure you have the required packages ?
Don't know if your version is a 32 bits or a 64 bits one but check this link (32 bits) :
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb28052%2Ftoc.htm&remark=portal+%28Installation%29
or this link (64 bits)
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb15668%2Ftoc.htm&remark=portal+%28Installation%29
and follow carefully the instructions (Redhat instructions)
Best regards
Phil

Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

Hello guys,
            Problem has been solved -
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
1. If you install 64 bit oracle this is not an issue. Install 64 bit oracle.
2. Download odp.net 32 bit from below link:-
    ODP.NET Managed Driver Beta Download</title><meta name="Title" content="ODP.NET Managed Driver B…
3. installed the odp.net.
4. open the visual studio 2010.
5.Select new - project - asp.net web application - project name -ok
6.select tools- > connect to database- then follow the following steps
                         i> user name - your user name/client username (example -- hr)
                         ii> password -- enter your password/client password (example- hr)
                        iii>select connection type -- if you want to connect client database then- select EZ connect other wise select tns
                        iv>test the connection- then you will get connection succeed.
                        v> then click ok
Thanks
Chandrashekhar

You do not need to do anything in VS. You do need to configure both tnsnames.ora files, because the drivers do not share any data.
Please see:
http://sqlblog.com/blogs/jorg_klein/archive/2011/06/09/ssis-connect-to-oracle-on-a-64-bit-machine.aspx

This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.

hi friends ,
My report Fetch from the orcle database , we installed Oracle 10g and 11g - clent 32 -bit on win 2k8 -64 bit machine .while design time runing fine,but ofter depolyement im facing below issue.
In error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set 'abc'. (rsDataSetExecutionError)
Cannot create a connection to data source ' Data source for shared dataset'. (rsErrorOpeningConnection)
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
Any help is greatly appreciated, I have tried couple of solutions going through some threads online but no use and place dt tell install 1og r 11g 64-bit

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Oracle 9i iAS: (Install Error)

Hello,
This is the Pop-Up message that I get, when installing Oracle 9i iAS:
Your local hsot name database file (typically /etc/hosts) is not configured
properly. This file should have an entry of the form:
<IP_ADDRESS> <FULLY_QUALIFIED_HOSTNAME> <AIASES>
On Solaris sustems, the following files should also contain the fully qualified hostname, including the domain name:
/etc/nodename, /etc/net/ticlts/hosts, /etc/net/ticots/hosts,
/etc/net/ticotsord/hosts, and any files in /etc whose names begin with "hostname"
In some of the above files, the hostanme may occur more than once, in which
case all occurences hould be changed. Please correct your local host name database file, reboot the host, and restart the installation.
Failure to properly configure this file may result in product runtime issues regarding proper hostname resolution.
I tried to edit my /etc/hosts file as follows and reboot my computer to no avail:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.9.200.12 Linux2005 Oracle9iserver
~
=====
How can I resolve this PB ?
PT

Hello,
I set my DISPLAY variable as follows:
DISPLAY=192.9.200.12:0.0; export DISPLAY
THen I can invoke the OUI for iAS without that error message.
MY /etc/hosts file looks like:
# Do not remove the following line, or various programs
# that require network functionality will fail.
#127.0.0.1 localhost.localdomain localhost
192.9.200.12 Linux2005.katz.qc.ca linux2005
=====
I commented out the first line. DUring the ORacle 9i Database Install I used both lines.
When asked to type a hostname and portnumber, I get this error:
An error occured while attempting to verify your host and port. Please verify your host and port values and that you can connect to this host, or enter new values. Use Ourput sTringlist is : localhost.localdoamin*7777*
Return value from SSORunning funciton is INVALID
=====
Any ideas how I can resolve this ?
PT

Oracle Software not installed

Hi!
I tried to install SAP NetWeaver 7.1 with Oracle 10 under Windows Server 2003 64bit in english fully updated. But I ran into two problems which prevented the SAP installation to finish : first once all the oracles updates were installed, the oracle wintows service would not start; second sapinst never managed to find the oracle installation and always answered "Oracle Software not installed".
For this installation I downloaded all the installation files from the SAP download center like this :
     - On http://service.sap.com/swdc in the left frame : download/installation and upgrades/entry by application group
     - then in the center frame : SAP NetWeaver/SAP NetWeaver/SAP NETWEAVER CE 7.1/Installation/Windows Server/Oracle/
     - I added everything to the Download basket but "Oracle 10.2.0.2.0 Patch for AIX 64bit" and "Oracle 10.2.0.2.0 Patch for Solaris 64bit"
- then I took the last patch for Oracle 10 on the SAP download center :
     - on http://service.sap.com/swcenter-3pmain in the left frame : Oracle/Oracle 64-bit/Oracle 10.2.0 64bit/Oracle 10.2.0.2/NT_x86_64
     - I added the last patch to the download basket
Then I followed this installation steps :
installation of the last jdk : jdk-6u3-windows-i586-p.exe
installation of Oracle 10.2.0.1 with : Oracle10.2.0.1-51031678\NT\I386\sapserver.cmd
installation of the last update for oracle 10.2.0.2 with : DVD_ORACLE_10.2.0.2_Patches_WIN_AIX_SOL\NT\I386\setup.exe
     => I had a problem with the installation of the patch chich detected the wrong version of windows so I forced it with : OPATCH_PLATFORM_ID=233 (I checked it before, it should really be the right one)
installation of the last patch of oracle :
     - definition of ORACLE_HOME and addition of opatch to the PATH
     - execution of "opatch apply" in the folder Oracle-10202_Patch16_MSWINX86-64-6397030\
===> *PB* : the installation of this patch enables the oracle windows service which won't run and doesn't send any errors (just timeout). I didn't find any help on this one. When I tried to start sqlplus in console, I got errors about DLLs not found but they exists in the bin directory of oracle and are in the PATH...
installation of NetWeaver 7.1 with SAP NetWeaver CE 7.1 SP3 for Oracle - 51032969\DATA_UNITS\CE71_03_IM_WIN_X86_64_ORA\sapinst.exe
       - normal installation + JavaEE + CompEnv
          - Media Browser - RDBMS Client Oracle : Oracle 10.2 Client - 51033272\OCL_WINDOWS_I386\LABEL.ASC
===> *PB* : at this point of the sap installation, I got an error "Oracle Software not installed" without any details. I didn't find any help on that either. It seems to come from a registry key missing...
After that, I uninstalled (with removal of the right keys in the registry to have something clean (<a href="http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/deinstall.htm">url</a>)) Oracle many times and tried different installation steps : without the patches, with the patches but without the update (doesn't work), with the patch 15, with the patch 16. In each cases Oracle service wasn't working if a patch was installed. And in each cases the sap installation never detected an Oracle installation. This installation steps are very reproductibles and are problemful.
Could anybody have some pointers or help on that one ?
Thanks in advance,
Florian

Hello Friends,
I tried the AMD64 based Installation Source to install Oracle 10g. and It works.
I also applied sufficient patches (AMD64/x86_64 based) to Oracle, as required. It worked fine, without giving that "Platform not compatible" error, as it was giving me before.
Now,I have got that , my machine was expecting x86_64 based Installation of Oracle .
I was little bit confused between x86, x64, x84_64, I386,etc..etc..terms...
Thanks to Markus and other friends.
The problem was due to mix installation of 32bit + 64bit Oracle Software & Patches. Previously, i installed i386 based Oracle, which is 32 bit version. Then i tried AMD64 based Installation source of Oracle RDBMS. It workes.
Previously, I was applying x86_64 based Oracle patches 16 & 17 on 32-bit Oracle version, thats why definitely it was giving error of "Platform not compatible", because it was expecting 64Bit Oracle version to implement that patch.
But, now, i successfully applied these two required Oracle 10.0.2.0 patches(16 & 17),on this 64Bit Oracle. (AMD64 based Installation source).
Then, I had run SAPInst of Installation Master (Win_x86_64) and started the Installation again. I also gave Oracle RDBMS Client Source location (x86_64 based). Then, also provided other required parameters. Now, the SAPInst worked fine, without that "Oracle Software not Installed" error.
And, Ultimately I successfully installed the SAP NetWeaver CE 7.1 on 64Bit Oracle 10g Database Software. Right now, the Server is working fine, without Errors.
Thanks Again.....

Oracle VM VirtualBox Install

Similar Messages

Maybe you are looking for