Oracle VM VirtualBox isn't running since OS X 10.9.4 Mavericks last update

Hi
MacBook Air, 1.7 GHz intel Core i5
4GB 1333 MHz DDR3
Made the the latest OS X 10.9.4 update, since then, Oracle VM VirtualBox isn't running.
Any suggestions?

Contact the developers for tech support. This is not an Apple product. Be sure you have the latest version installed.

Similar Messages

Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
"C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
This is the version our Exchange Servers are on:
ProductVersion   FileVersion      FileName
14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
ProductVersion   FileVersion      FileName
14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2.
Any ideas?

Hi,
From your description, I would like to clarify the following things:
1. Make sure the World Wide Web Publishing Service is running in Exchange server.
2. Ensure that the account you use to open EMC is a member of Organization Management role group.
3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
What's more, here is a similar thread for your reference.
Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Has anyone tried ORACLE VM VIRTUALBOX?

I have just come across this application after I downloaded "Open Office" from Oracle, a free Office Suite. I sounds like this "VirtualBox" is like parallel desktops, but for many diffeent OS's besides Windows. Here is the website: http://www.oracle.com/us/technologies/virtualization/oraclevm/061976.html
DESCRIPTION:
MORE ABOUT ORACLE VM VIRTUALBOX
Multiple operating systems on one desktop
Cross-platform guests and hosts including Windows, Linux, and Oracle Solaris, and Mac OS X as a host
Teleportation of running virtual machines between hosts without interruption
High performance
Support for massive workloads of up to 32 virtual CPUs
OVF format support

As others have said, it has been around for years. I used it to run Windows XP in both Tiger and Leopard, but when I upgraded to Snow Leopard the then current version of Virtual Box was not ready for the new Mac system, so I never installed it.
It worked fine, once it got set-up properly, but setting it up was not exactly easy. Like many open source applications it was a bit non-intuitive for a Mac user, and the directions were not particularly clear. I believe it took several weeks before everything was working the way I wanted (to be fair, I did want to set it up in a slightly non-standard way).
Francine
Francine
Schwieder

Oracle VM VirtualBox need~ VT-x /Intel Virtulization Technology missing in BIOS?

My laptop is lenovo S440,which is running Intel® Core™ i5-4200U Processor.
I checked that Intel official website,the processor support Intel® Virtualization Technology (VT-x).
However,by the time I running Oracle VM VirtualBOX,it prompt that
"VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it."
I try to enable it at BIOS ~Config>CPU,however I can't see option of Intel® Virtualization Technology (VT-x). to be select,so I have no way to enable/disable it.
Am I go to the correct path to do the configuration at BIOS?

Hello and welcome,
Have you also looked under BIOS->Security->Virtualization?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

GUIDE: Oracle VM VirtualBox and Oracle Linux NIC bonding

Author: Dude
Date: 01-Jun-2013
Version: B
Last updates:
23-Jul-2013, changes required due to forum upgrade
The following is provided in the hope that it might be useful. If you wish to use it for the purpose of reference, presentation or education, please include the link or information to this forum posting. Thank you!
What is Linux network interface bonding? Simply put, the Linux system provides a kernel driver, which can create a logical network device (bond) using 2 or more Network Interface Controllers (NIC) to accomplish link-aggregation and adapter fault-tolerance. For more information, please see the Deployment Guide at https://linux.oracle.com/documentation/
The channel bonding interface supports several modes of operation. In a typical active-backup set up for fault-tolerance, the system performs MII-based health monitoring of the network interface slaves (eth0, eth1) and assigns them according to bond options and interface availability. In active-backup mode (mode 1), only the current active network device is seen externally.
Linux bonding for fault-tolerance under Oracle VM VirtualBox does not seem to function as advertised. Searching the Internet for more information shows that other people have tried to set up Linux bonding using various virtualization products, virtual host network adapter and bonding options, but without success.
It appears the management of Media Access Control addresses (MAC) interferes with internal routing methods between the host and the virtual machine guest. Using the modinfo bonding command (fig. 1) shows a listing of available parameters for the bonding kernel module. The fail_over_mac parameter addresses the Mac address issue in VirtualBox.
Fig.1
# modinfo bonding
filename:       /lib/modules/2.6.39-400.17.1.el6uek.x86_64
                /kernel/drivers/net/bonding/bonding.ko
parm:           fail_over_mac:For active-backup,
                do not set all slaves to the same MAC;
                0 for none (default), 1 for active, 2 for follow (charp)
Configuration Example
Virtualization Product: Oracle VM VirtualBox 4.2.10
VM Guest OS: Oracle Linux 6.4 (x64)
VM adapter settings: Bridged Adapter, Paravirtualized Network (virtio-net)
Adapter1 (eth0): 080027436617, en0, Ethernet 1
Adapter2 (eth1): 08002708F36A, en0, Ethernet 1
Note: If you wish to reset the network adapter names and MAC addresses used by the Oracle Linux guest system, erase the content of /etc/udev/rules.d/70-persistent-net.rules and restart the virtual machine.
1. Create or modify the following configuration files:
/etc/modprobe.d/bonding-eth0_eth1.conf
alias bond0 bonding
/etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=10.0.2.12
NETMASK=255.0.0.0
GATEWAY=10.0.0.138
DNS1=10.0.0.138
DNS2=8.8.8.8
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
BONDING_OPTS="mode=1 miimon=100 fail_over_mac=1"
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no
/etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no
2. Restart the system or network services (root):
Fig. 2
# service network restart
Configuration Test
Enter the following commands as user root to verify proper operation of NIC bonding:
Fig. 3
# tail /var/log/messages
bond0: setting mode to active-backup (1).
bond0: Setting MII monitoring interval to 100.
bond0: Setting fail_over_mac to active (1).
bond0: Adding slave eth0.
bond0: making interface eth0 the new active one.
bond0: first active interface up!
bond0: enslaving eth0 as an active interface with an up link.
bond0: Adding slave eth1.
bond0: enslaving eth1 as a backup interface with an up link.
Fig. 4
# ifconfig
bond0     Link encap:Ethernet HWaddr 08:00:27:43:66:17
          inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
          inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth0      Link encap:Ethernet HWaddr 08:00:27:43:66:17
          UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
eth1      Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
          UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
Fig. 5
# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window irtt Iface
0.0.0.0         10.0.0.138      0.0.0.0         UG        0 0          0 bond0
10.0.0.0        0.0.0.0         255.0.0.0       U         0 0          0 bond0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 bond0
Fig. 6
# ifconfig eth0 down
# tail /var/log/messages
bond0: link status definitely down for interface eth0, disabling it
bond0: making interface eth1 the new active one.
# ifconfig
bond0     Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
          inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
          inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth1      Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
          UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
Fig. 7
# ifconfig eth0 up
# ifconfig eth1 down
# tail /var/log/messages
bond0: link status definitely up for interface eth0, 4294967295 Mbps full duplex.
bond0: link status definitely down for interface eth1, disabling it
bond0: making interface eth0 the new active one.
# ifconfig
bond0     Link encap:Ethernet HWaddr 08:00:27:43:66:17
          inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
          inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
          UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth0      Link encap:Ethernet HWaddr 08:00:27:43:66:17
          UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
During the above test, the client network connection from host 10.0.0.1 (ssh) was maintained without any noticeable interruption. As it can be seen from the syslog and ifconfig command output, the bond0 interface was automatically assigned either the MAC address of eth0 or eth1 and the fail-over worked as advertised.
Good luck!

Please see these docs/links.
Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12 [ID 465915.1]
Certified Software on Oracle VM [ID 464754.1]
Oracle VM Templates -- Oracle E-Business Suite 12.1.3 (32-bit), Oracle E-Business Suite 12.1.1 (64-bit and 32-bit) and Oracle E-Business Suite Release 12.X Sparse Middle Tier (32-bit)
http://www.oracle.com/technetwork/server-storage/vm/ebs-093153.html
E-Business Suite 12.1.3 Templates for Oracle VM Now Available
http://blogs.oracle.com/stevenChan/2010/11/ebs1213_oraclevm.html
Live Migration of EBS Services Using Oracle VM
http://blogs.oracle.com/stevenChan/2010/01/ebs_live_migration_ovm.html
Using Oracle VM with Oracle E-Business Suite Virtualization Kit
http://blogs.oracle.com/stevenChan/2009/12/oracle_vm_ebs_virtualization_kit.html
New Oracle® VM Templates for Oracle Applications Now Available
http://www.oracle.com/us/corporate/press/068341
Very Cool! New Oracle VM Templates for Oracle E-Business Suite
http://blogs.oracle.com/virtualization/2010/11/very_cool_new_oracle_vm_templa.html
Thanks,
Hussein

EU_CLONE_MIG_DT_PRP running since 7 hours -

Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - but the mentioned phase 57.6 % done (in phase: MAIN_SHDIMP/SUBMOD_MIG_UPTIME_PRP/EU_CLONE_MIG_DT_PRP) is running since 7 hours with no update in the logs.
Last log updated was EUMIGRATEDTPRP and there are no errors written in it.
Few lines from the log are :
3 ETQ123 20150113065919 (2): PID 9164 exited with status 0 (time 0.000 real)
1 ETQ399 Got 18 split conditions for table 'PCL4' in 'h:\DMO_E\SUM\SUM\abap\migrate_dt\MIGRATE_DT_PRP0003_SPLIT.WHR' - adding to cache.
3 ETQ123 20150113072306 (1): PID 3656 exited with status 0 (time 0.000 real)
1 ETQ399 Got 4 split conditions for table 'PPOIX' in 'h:\DMO_E\SUM\SUM\abap\migrate_dt\MIGRATE_DT_PRP0011_SPLIT.WHR' - adding to cache.
Our environment is as followed :
Source ECC6 Ehp5 702 on Oracle.
Target ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
What checks i can perform to ensure if the phase is running properly ?
What can i do to speed up the process.?
My CPU usage is 15% only and CPU usage is 5%.
Thanks
Dev

Hi Dev,
indeed this phase may take long, depending also on the performance of the source database.
You should check whether there are still processes running, esp. SAPuptool.
The number of R3load uptime processes is relevant for this phase. It can be adapted via browser, see section 4.2.2 "Changing processing parameters during runtime" in the DMO documentation.
Best regards, Boris

The Oracle BI server is not running. The repositiry had to be closed

Hi guys,
I have a OBI Standard Edition 10.1.3.4.1.
I have modify the rpd and if I try to "Check In Changes", the error appears: "The Oracle BI server is not running. The repositiry had to be closed".
In the nQServer.log this error appears:
[nQSError: 12002] Socket communication error at call=recv: (Number=10055) An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
Why?
The problem persist if I restart the services.
The problem only occurs if I make a change in the Business Model Layer. The changes in the Physical Layer do not generate errors.
Thank you,
Sara

Hi Sara,
Can you please let us know, if there are any other messages in the NQServer.out.log ? I just googled around with this code to hit at the following link : http://www.bookmark-master.com/socket-error-10055.html
Socket error (#10055): No buffer space available.
Analyse & Solutions:
An operation on a socket or pipe was not performed because the system lacked sufficient buffer space or because a queue was full. This error indicates a shortage of resources on your system. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine. If this tends to occur after running certain applications for a while, it might be a symptom of an application that doesn't return system resources (like memory) properly. It may also indicate you are not closing the applications properly. If it persists, exit Windows or reboot your machine to remedy the problem.
From the above information, I understand that this is a system resource issue. Can you please recheck if your system has got enough resources?
Hope this helps.
Thank you,
Dhar

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How Do I find out if Oracle 8.1.5 is running in 32 bit or 64 bit mode?

How Do I find out if Oracle 8.1.5 is running in 32 bit or 64 bit mode? Can anyone please respond that may know the answer to this? It would help a bunch. Thanks!
Greg

Hi,
To find out wheter 32 or 63-bit mode
# /usr/bin/isainfo -kv
Now, switching between modes
32-bit mode
# eeprom boot-file=kernel/unix
64-bit mode
# eeprom boot-file=kernel/sparcv9/unix
or OK prompt,
32-bits mode
boot kernel/unix
64-bit mode
boot kernel/sparcv9/unix
or even,
32-bit mode
setenv boot-file kernel/unix
64-bit-mode
setenv boot-file kernel/sparcv9/unix
Arrebola

The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

VSS-00011: Connection to database instance <instance_name> failed.
Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.
Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.
I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
the above error. Was advised to raise the issue here that it is an OS issue. Pls help

The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
Have you checked what I already asked for? "Try using the user account and access the Database Instance.
That will let you see if the problem is with the user account permissions or not."
If this does not help then you can contact Oracle as suggested by Dave.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

[SOLVED]Cannot run own program since last update : malloc.c:3096 error

Hi all,
It seems that due to a recent update a program that I am working on doesn't run any more.
It doesn't rely on any external libraries and compiles fine, but when it gets to a : "pointer = new class_object[4096];" it crashes with the error:
malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
Aborted
I've done some searching but have been unable to find much other than this thread: http://bbs.archlinux.org/viewtopic.php?pid=654908 which leads me to believe that it might be a library version conflict. I am unsure how to debug this though. I also own an nvidia card running nvidia drivers, and the nvidia drivers were updated in the last update but I do not have the same file that the previous poster had a conflict with. I am also not sure how the nvidia drivers would cause problems as I'm not linking with OpenGL or any library other than the standard library.
Does anyone have any ideas?
Thanks!
Last edited by neutrix (2010-02-17 15:05:01)

Well this problem works both in debug and release builds. I've got the bug down to the individual line that it crashes at, I create an instance of a class like this:
Vec3 *vectorlist;
vectorlist = new Vec3[5012]; //CRASHES ON THIS LINE
Vec3 is a class that I've defined for 3D vectors. It doesn't do anything complicated or special, the constructor simply initializes the 3 components of the vector to 0. I am happy to post the full code (it isn't very complex) if someone else wants to try compiling it to see if it works on their computer.
I think the problem might not be in my code (considering it worked before the update), but instead might be some clash between library versions as in the thread that I linked to in my first post. I am not sure how to go about debugging a problem like this though.

Java apps have started running very slowly since last update. Anyone else experiencing any problems.

There is an java app that I have run for years without any problem Within the last few days it started running very slowly. I went to the Apple store and ran the same app and experienced exactly the same problem
Yesterday I tried running this app on a Windows based machine and it ran perfectly.
I was all set to download the latest java when I saw that Apple supplied the java version on the MAC.
I have run sotware updates and get results that all software is uptodate.
Any suggestions?

There are many people who have posted about persistent export failures since the update. A search will uncover a number of threads just within the past month. There doesn't seem to be a pattern to these problems – and if there is common fix, I haven't heard about it.
However, the update hasn't been a problem for me – nor presumably has it been for the majority of users.
Russ

How to protect customization in oracle apps files against autoconfig run

Hi,
how to protect customization in oracle apps files against autoconfig run.
For example:
Take wdbsvr.app file i have added a new dad configuration for APEX but when ever i run autoconfig it replaces all my customizations so could you please let us know how to protect these customizations .
Thanks.

Hi,
Please see (Note: 270519.1 - Customizing an AutoConfig Environment).
Regards,
Hussein

Any way to tell if an Oracle 9i export is still running?

I got an Oracle export that's been running for almost 1 days now.
The export file shows a modification time of 3 am this morning and does not appear to be growing.
The log file does not show any errors.
I think it's stuck and I need to restart it.
Any way to definitely know if the export is still running?
Thanks,
Nik

select * from v$session where status = 'ACTIVE' and program like %exp%;
Get the information of the session,put some tracing on it to see what exp is actually doing.
How To Trace And Produce TKPROF Output For Traditional Export (EXP)/Import (IMP) Performance Issue (Doc ID 1154365.1)
Trace Option In Traditional Export and Import (Doc ID 271782.1)

Oracle VM VirtualBox isn't running since OS X 10.9.4 Mavericks last update

Similar Messages

Maybe you are looking for