Oracle Wallet Manager: Organizational Unit containing "&"

Hello,
I would like to use an existing ssl certificate for Oracle Application Server 10.1.3.1. This Certificate is issued for an like Identity "CN=server.domain.com, OU=foo&bar, O=Company, L=City, ST=State, C=DE".
If I try to create the corresponding certificate request, the OWM says "certificate request couldn't be created. Check user information.". If I remove the "&", every thing works fine.
Is there any possibility to use an organizational unit containing "&"?
Thanks for any help in advance.
Best regards
Ralf

Hi Ralf!
Just try to encapsulate the OU in " " . So this should be OU="foo&bar"
cu
Andreas

Similar Messages

Oracle Wallet manager error

Hi all,
Inorder to test SSL, i created a certificate request in OWM.Then i got a trial certificate from verisign for this request.What should i do now ? I tried to import that certificate in Oracle Wallet manager but getting this error.
"Trusted Certificate Installation Failed.
Input was not a valid certificate".
Please guide me
Srini

belw is the note
PURPOSE
To list the steps needed to configure Oracle HTTP Server (OHS) to use the Secure
Sockets Layer (SSL) when installed with Oracle9i Application Server (9iAS)
Release 2 (9.0.2). The below instructions show, step by step, instructions for
obtaining a trial certificate from a Certificate Authority, such as Verisign or
Thawte. Please refer to the Oracle 9iAS Documentation for further details.
SCOPE AND APPLICATION
Oracle9i Application Server (9iAS) Release 2 (9.0.2 and above)
Configuring SSL with Oracle HTTP Server in 9iAS Release 2
There are two major steps needed to configure SSL in 9iAS:
I. Create an Oracle Wallet which contains an SSL Certificate
II. Configure httpd.conf directives to enable SSL with OHS
NOTE:
Only standard server certificates are supported. These are sometimes referred
to as "40-bit Certificates", but will allow 128-bit encryption provided the
browser supports 128-bit encryption. 9iAS Release 2 does not support Global
Server Certificates, called "128-bit Certificates", that allow 56-bit export
browsers to step up to 128-bit.
STEP I: Configuring Oracle Wallet Manager (OWM)
1. Start Oracle Wallet Manager from the 9iAS $ORACLE_HOME.
Note: If you wish to use AutoLogin features you must start OWM as the user
who owns the httpd parent process.
To start Oracle Wallet Manager:
On Windows: select Start > Programs > Oracle - ORACLE_HOME >
Integrated Management Tools > Wallet Manager
On UNIX: enter owm at the command line.
2. Create an Oracle Wallet which contains an SSL Certificate:
- Select Wallet -> New
- Enter a password for the wallet e.g Welcome1
- Create a Certificate Request.
- Enter the details for the request. For example:
     Common Name:          <hostname.domainname>
Organizational Unit:      Support
Organization:      Oracle
     Location:          Reading
     State:               Berkshire
     Country:          United Kingdom
     Key Size:          1024bits
* Common Name has to match the hostname.domainname that the webserver is
known as. This is the Servername parameter in the httpd.conf file, and
is the hostname.domainname that users will enter in the browser URL.
- Click OK.
- Click 'Certificate:[Requested]' and select from the Menu 'Operations' and
'Export Certificate Request'
- Save to a file e.g server.csr
- Open the file in a text editor and copy the contents of the certificate
signing request, to be pasted in a Certificate Authority (Verisign) form.
An example is shown below:
-----BEGIN NEW CERTIFICATE REQUEST-----
MIIBtzCCASACAQAwdzELMAkGA1UEBhMCR0IxEjAQBgNVBAgTCWJlcmtzaGlyZTEQMA4GA1UEBxMH
cmVhZGluZzEPMA0GA1UEChQGb3JhY2xlMRAwDgYDVQQLFAdzdXBwb3J0MR8wHQYDVQQDFBZ1a2Ro
MTkzNC51ay5vcmFjbGUuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCYkFMb9x4ehsG3
yQ2ub319GxPW+/TC3NSIYRLzEa49EziqBUr08R3Ssn9+6nolVjj1eb3rzwCfjiOSzsp1lSa/B9Vo
63pwP6xLbCgF8J86YfcZvavgLzY0Yc1fPfRxpZkb/jjt+F1zkaI6Lilm5YU3bRNYMb36TAWxUYL1
m6wZOwIDAQABoAAwDQYJKoZIhvcNAQEEBQADgYEACKXTmPHaSe3Lx3onnKJk/qI8SzpKyQC/B29v
JGg1+7Lb7gl052Y9WKxbKHzOQOYr8yYxMXNBCUwW6kBAFoxTWSpIxIQOpJXcsu1RlHKaLfAnw053
LiwpRB6do7MBrVgMRiv3AyTkJkgRzSxABWAgNpBPbhH+L6PZj5tSjOPErKA=
-----END NEW CERTIFICATE REQUEST-----
3. Request a Certificate from a Certificate Authority:
- Load a web browser and go a Certificate Authority website of your choice.
The examples below are from www.thawte.com:
- Click on 'request your free trial'.
- Fill in the necessary name and address details etc. and 'Submit'.
- Paste in the certificate request into the box under the
'Certificate Signing Request' Section.
- Select "Test X509v3 SSL Cert" and hit "Generate Test Certificate"
- Once submitted the Trial Certificate will appear on screen similar to below:
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
- Copy the certificate to a file called server.crt
- Get the Trusted CA Root certificate by accessing:
https://www.thawte.com/roots/index.html
- Copy the certificate that appears on the screen to a file called
servertest.crt
- Ftp or move the files to a directory on your server
- In Wallet Manager select Operations -> Import User Certificate.
- It will then ask you if you want to Paste the certificate or load
from a file. Choose 'Select a file that contains a certificate'.
- Select the file server.crt and hit OK.
- At this point, the Wallet Manager may complain that the Trusted CA Root
Certificate does not exist in the wallet. It will ask if you want to
import it now. Select Yes. See Below
- Select 'Select a file that contains a certificate' and select the
servertest.crt file.
- If this completes successfully you should see Certificate:[Ready] and the
Thawte Test CA Root will appear in the list of trusted certificates.
- If you desire Oracle HTTP Server to AutoLogin to the Wallet, then select
AutoLogin. (Wallet Manager must have been started as the owner of the
httpd parent process for this to work).
- From the menu, File -> Save
Save the Wallet in a directory where the 9iAS user has permission to access
* If you generated your test certificate via www.verisign.com there is an additional
step required if OWM is not accepting the Trusted CA Root Certificate. The step is
as follows:
In OWM, at the point of message "User certificate import has failed because the
CA certificate does not exist". You are expected to import the CA certificate.
For Verisign, that would be the 'Test CA Root' for the Trial version. Verisign's
email has instructions on how to download the Test CA Root. One problem with the
Test CA Root is that it is saved as DER encoding, but OWM expects BASE64 encoding.
Please do following, using Internet Explorer 5.X as example.
1. Following Verisign instructions and install Test CA Root
certification into IE.
2. Export 'Test CA Root' from IE in BASE64 format
Tools -> Internet Options -> Contents -> Certificates
-> Trusted Root Certificate Authorities
Select CA issued by Versign with following Description in 'Issued to' column
"For Versign authorized testing only ....."
Export -> Next -> select Base-64 encoded X.509(.cer)
The file saved must me accessible to OWM
3. When prompted to load 'CA certificate ', provide the Base64 encoded file.
Then, continue where you left off when OWM did not accept your Trusted CA
Root Certificate.
STEP II: Configuring Oracle HTTP Server (OHS)
Please review the default directives in the httpd.conf file that relate to SSL by
opening the file in a text editor and search on "SSL". If you have not already
done so, please make a back up of this file. Do NOT hand edit this file without reading
the precautions in the 9iAS Documentation. You should use the Enterprise Manager (EM)
Website to modify this file. For SSL to work, the SSL 'listen' port must match the
"VirtualHost _default_" directive within the file. All other SSL parameters are
set to the default, and you can modify at a later time, depending on your needs.
## SSL Support
Listen 80
Listen 443
#443 is the SSL port number.
##Further down in file:
<VirtualHost default:443>
For the purposes of a basic SSL configuration, you should only need to
change the following directives:
SSLWallet
SSLWalletPassword
- Change the SSLWallet directive to the path where you saved your wallet, i.e:
SSLWallet file:/tmp/wallets
- If you get an error, ADMN-906025 with exception 806212, when starting OHS
after modifying httpd.conf, it is because you need to supply this password.
You may also see errors such as the following:
Error Failed to restart HTTP Server.
Timeout has been reached. Timeout has been reached.
If you did not select AutoLogin, then you need to change the SSLWalletPassword
to your clear text Wallet password by adding the following into your httpd.conf
SSLWalletPassword <yourPassword>
- If you wish to encrypt the SSLWalletPassword refer to the following:
[NOTE:184677.1]
How to Use IASOBF to Encrpyt a Wallet Password Within 9iAS Release 2
- Save the configuration, and restart Oracle HTTP Server
- Test a URL to Oracle HTTP Server in SSL mode:
https://<hostname.domainname>:<port>

Oracle Wallet Manager won't allow me to create a certificate request

Hello,
I am trying to setup my installation with SSL, I am trying to create a certificate request on Oracle Wallet Manager and I keep getting this error:
"Could not create certificate request. Please check user information"
I am entering the following information:
Common Name: portal.grupoalsea.com.mx
Organizational Unit: Desarrollo
Organization: Sistema Integral de Administracion, S.A. de C.V.
Locality/City: Distrito Federal
State/Province: Mexico
Country: Mexico
Key Size: 1024 bits
Why could this be happening? Does Oracle Wallet Manager go and look for my info some place? Common Name is the name for my site on WebCache, which is in turn mapped to the HTTP Server called Mservicio.localdomain.
At this point, I have also tried setting the Common Name to other values, like the name of my HTTP Server, the name of my HTTP server without the "localdomain", but I still get the same message.
Any help will be really appreciated!!!!

Problem was due to a bug that won't allow to enter commas in Organization Name. All we needed to do is remove the comma from the Organization name and the certificate was correctly created.

Unable to import the user certificate into the Oracle Wallet Manager

Hi,
I am configuring the External Authentication plugin using the password filters.
i am using the version 10.1.0.5.0 version of Oracle Wallet manager
inorder to do that i am enabling the SSL mode.
to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
User Certificate Installation failed.
Possible errors:
- Input was not a valid certificate
- No matching certificate request found
- CA certificate needed for certificate chain not found.
Please install it first
can anyone help me how to resolve this problem.

hi,
thanks for your reply pramod
I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
what may be the problem.

What is the use of Oracle Wallet Manager

Hello All,
I have notives that there is a tool called "Oracle Wallet Manager" that is loaded on to my machine.
After reading the on-line help I figure that It can keep some certificates for me.My question ;
What is this tool used for?
Why do we have this tool?
Does anybody have any whitepapers/ recpies/ examples/ demos
on this stuff.
any help will be appreciated.
regards
Sanjiv

Sanjiv.
Oracle Wallet Manager is a tool to manage internet certificates for clients and servers (databases can have certificates) issued by Certificate Authorities (e.g. Verisign). It can be used in conjunction with Oracle Net/SSL.
Details on it can be found at the following link:
http://download-east.oracle.com/otndoc/oracle9i/901_doc/network.901/a90150/asowalet.htm#1006830
Harold

Using a SHA2 certificate with 12.1.1 (Oracle Wallet Manager 10.1.0.5)

Hi folks,
I'm trying to enable SSL on my 12.1.1 system, but I've got a bit of a problem.
I've already logged a SR on this, so I already know that you cannot use SHA2 SSL certificates with Oracle Wallet Manager 10.1.0.5, which is part of the 10.1.3 tech stack. I started the SR on the EBS side, but it was passed on to the security group, and closed there. My question is, is there something that I don't know? Is there an upgrade path in 12.1.x that would include an upgrade to the OWM, or is there some sort of workaround? I'll be opening another SR tomorrow, but wanted to see if I was missing something simple.
We have an internal certificate server (Microsoft AD), and the root certificate, which I need to import, is SHA2. I'm being told that they cannot generate a SHA1 root certificate, and would have to stand up another certificate authority. OWM 10.1.0.5 can't handle SHA2, so I'm stuck.
Anybody been there done that?
Thanks very much,
-Adam vonNieda

I'm trying to enable SSL on my 12.1.1 system, but I've got a bit of a problem. What kind of problems?
I've already logged a SR on this, so I already know that you cannot use SHA2 SSL certificates with Oracle Wallet Manager 10.1.0.5, which is part of the 10.1.3 tech stack. I started the SR on the EBS side, but it was passed on to the security group, and closed there. My question is, is there something that I don't know? Is there an upgrade path in 12.1.x that would include an upgrade to the OWM, or is there some sort of workaround? I'll be opening another SR tomorrow, but wanted to see if I was missing something simple.
We have an internal certificate server (Microsoft AD), and the root certificate, which I need to import, is SHA2. I'm being told that they cannot generate a SHA1 root certificate, and would have to stand up another certificate authority. OWM 10.1.0.5 can't handle SHA2, so I'm stuck. I am not sure if SHA2 is certified with EBS R12 so you might need to ask this question to Oracle Support. According to the following docs, SHA1 can be used with no issues.
Enabling SSL in Oracle E-Business Suite Release 12 [ID 376700.1] To BottomTo Bottom
SSL Primer: Enabling SSL in Oracle E-Business Suite Release 12 (Trial Certificate Example) [ID 1425103.1]
Thanks,
Hussein

Some trusted certificate could not be installed , oracle wallet manager

Hi there,
I am using Oracle Wallet Manager 10.2.0.1
Oracle DB 10.2
when I try to import a certificate I have exported from the browser, I have such error,
that certificate is not something globally known, but it is for local communication,
as I understood that when I specify to import trusted certificate, that does not matter , does it?
please that I have successfully imported another "known" certificate exported with the same way,
what can the reason of such an error,
thanks in advance
rgrds

The problem was in the certificate itself.
Regards.

Help needed with Oracle Wallet Manager

Hi , I have to call a Web Service that is made in PL/SQL from another PL/SQL package. The web service is an HTTPS server so I have to use Oracle Wallet Manager because those who made the web service uses it.
Is there a PL/SQL guide or receipe to do that. Here's what I have done now and that does'nt return me the string I want!
vURL := 'https://www2.frsq.gouv.qc.ca/frsqeforms/FRSQ_NIP_EXISTS?pNOM_NAISS=' || pNOM_NAISS || '&pPRENOM=' || pPRENOM || '&pNOM_MERE=' || pNOM_MERE || '&pSEXE=' || pSEXE || '&pDATE_NAISS_YYYY=' || pAn_naissance
|| '&pDATE_NAISS_MM=' || pMois_naissance || '&pDATE_NAISS_DD=' || pJour_naissance;
vURL := utl_url.escape(vURL);
UTL_HTTP.SET_WALLET('file:/export/home/oracle/Wallet','********');
select UTL_HTTP.REQUEST(vURL) into resultat from dual;
vNip := resultat;
I should have something in th resultat variable. I'm I muissing some steps or I should work like that?
I'm on Oracle 9.2.0.6 on solaris sun.
The web service is supposed to return me a PIN number. I works when I do it on the devloppment environement because there is no https.
I don't have any error message except that it returns me a html pages with a 404 in the string that I am supposed to receive a PIN number. I got the error in development but my variable had the value that I want! If I paste the URL in a browser it works very fine. You can try it with that (the development server)
http://207.253.66.69/frsq_dev/FRSQ_NIP_EXISTS?pNOM_NAISS=Bouchard&pPRENOM=Diane&pNOM_MERE=Thibault&pSEXE=F&pDATE_NAISS_YYYY=1964&pDATE_NAISS_MM=04&pDATE_NAISS_DD=04
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
Not Found
The requested URL /frsqeforms/FRSQ_NIP_EXISTS was not found on this server.
<HR>
<ADDRESS>Oracle-Application-Server-10g/1

Duplicate post ... please ignore.

Where can I find the Oracle Wallet Manager?

Hi,
I'm trying to configure an MQSeries Adapter for SSL however being fairly new the 'Wallet' concept as well as SSL configuration I'm having a hard time finding it. I don't see any option in my WinXP start menu. I ran a search for 'owm' in my local and found the 'owm-3_0.jar' file. When I try to run it via java -jar I get a main class not found.
Is there an alternative to run this manager? Can I download it somewhere? Is there a cmd-based tool I can use instead to add certificates to my wallet (cwallet.sso)?
Thanks,
MV

Hi,
To start Oracle Wallet Manager select Start, Programs, Oracle-HOME_NAME, Integrated Management Tools, Wallet Manager
http://download.oracle.com/docs/cd/B28359_01/network.111/b28530/asowalet.htm#ASOAG9745
Regards,
Anuj

Oracle Wallet Manager will not start with GLIBC_2.0 error

I have cloned my 11.5.10.2 system from RHEL4 to the new RHEL5 server.
configured all started non-ssl, configuring ssl and the IAS_ORACLE_HOME cert works fine, but when I try to start wallet manager I get the error
Starting Oracle Wallet Manager Release 2.1 - Production
/u01/oraapps/oracle/product/8.0.6/network/jre11/bin/../lib/i686/native_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Done.
I have been through most every metalink article and none seem to apply.
LD_ASSUME_KERNEL is unset
OA_JRE_TOP, AF_JRE_TOP, AFJVAPRG all point to /user/java/jdk1.6._20 etc as they should
I also have an iAS 10g server on the same machine and OWM starts fine when I am that user (it was installed new not cloned)
I assume I am missing a link somewhere but I can't seem to figure out where, anyone have any thoughts? Thanks!

Hi,
Does rapidclone now execute the scripts identified in MOS Doc 356878.1 automatically ? It did not used to perform an automatic relink.Rapid Clone always relink the database executable files automatically.
Thanks,
Hussein

Oracle Wallet Manager

Hi I have a server.key , a server.cer and server-ca.crt. I need to import these using oracle wallet manager. How do I do that?

hi,
The installation consists of three main parts:
a) Importing the Primary Root CA
b) Import the Intermediate Certificate and Cross Certificate
c) Installing your SSL123 certificate
a) Importing the Primary Root CA
1. Get a copy of the root certificate
2. Launch Oracle Wallet Manager.
3. Click Operations and select Import Trust Certificates from the menu
4. When the Import Trusted Certificate window appears, click Paste the Certificate and click OK.
5. When the message "Please provide a base64 format certificate and paste it below" appears, paste the entire contents of Primary Root CA text into the box and click OK.
6. A message should appear that the import was successful and you will see the Root Certificate at the bottom of the Trusted Certificates tree.
b) Importing the Intermediate and Cross certificates
1. Launch the Oracle Wallet Manager.
2. Click Operations > Import Trust Certificates from the menu.
3. When the Import Trusted Certificate window appears, click Paste the Certificate and click OK.
4. When the message "Please provide a base64 format certificate and paste it below" appears, paste the entire contents of the Intermediate Certificate text into the box and click OK.
5. A message should appear that the import was successful and you will see the Intermediate Certificate at the bottom of the Trusted Certificates tree.
6. Repeat the same steps for the Cross certificate
c) Importing your SSL123 certificate
1. Click Operations > Import User Certificate from the menu bar.
2. The Import Certificate dialog appears.
3. Select the Paste the Certificate radio button, and click OK.
4. The Import Certificate dialog appears.
5. Paste the entire contents of your SSL123 Certificate file and click OK.
6. A message should show that the certificate was imported successfully.
7. When you return to the main window, wallet status should show "Ready."
Hope this will help you,
Regards
Fabian

Oracle wallet manager and how can I import a .cer f

Hi where can I download oracle wallet manager and how can I import a .cer file to a wallet file .p12 that OAS uses in Apache configuration.

Hi where can I download oracle wallet manager and how can I import a .cer file to a wallet file .p12 that OAS uses in Apache configuration.

Oracle Wallet Manager hang when import a trusted cert

i'm facing problem when import 1 of my client's cert.
it hang and not responsive when i try to import it.
the oracle wallet manager version is 10.1.0.4.2
my client's cert is 512bit self signed
Message was edited by:
kinwah.lai

Hi,
To use it, you need to convert the cert into binary format. Then it is simply dumpasn1 bincert.cer. This dumpasn1 output is obtained from your cert:
0 30 524: SEQUENCE {
4 30 438: SEQUENCE {
8 A0 3: [0] {
10 02 1: INTEGER 2
13 02 17: INTEGER
: 00 C4 CE 12 F5 0D A9 0A 4C C1 56 80 3F B0 01 7C
: 99
32 30 13: SEQUENCE {
34 06 9: OBJECT IDENTIFIER
: sha1withRSAEncryption (1 2 840 113549 1 1 5)
45 05 0: NULL
47 30 126: SEQUENCE {
49 31 11: SET {
51 30 9: SEQUENCE {
53 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
58 13 2: PrintableString 'MY'
62 31 17: SET {
64 30 15: SEQUENCE {
66 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
71 13 8: PrintableString 'Malaysia'
81 31 35: SET {
83 30 33: SEQUENCE {
85 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
90 13 26: PrintableString 'Carrefour.net V22 Malaysia'
118 31 55: SET {
120 30 53: SEQUENCE {
122 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
127 1E 46: BMPString
: '[email protected]'
175 30 30: SEQUENCE {
177 17 13: UTCTime '070309053122Z'
192 17 13: UTCTime '090309053122Z'
207 30 126: SEQUENCE {
209 31 11: SET {
211 30 9: SEQUENCE {
213 06 3: OBJECT IDENTIFIER countryName (2 5 4 6)
218 13 2: PrintableString 'MY'
222 31 17: SET {
224 30 15: SEQUENCE {
226 06 3: OBJECT IDENTIFIER localityName (2 5 4 7)
231 13 8: PrintableString 'Malaysia'
241 31 35: SET {
243 30 33: SEQUENCE {
245 06 3: OBJECT IDENTIFIER organizationName (2 5 4 10)
250 13 26: PrintableString 'Carrefour.net V22 Malaysia'
278 31 55: SET {
280 30 53: SEQUENCE {
282 06 3: OBJECT IDENTIFIER commonName (2 5 4 3)
287 1E 46: BMPString
: '[email protected]'
335 30 92: SEQUENCE {
337 30 13: SEQUENCE {
339 06 9: OBJECT IDENTIFIER rsaEncryption (1 2 840 113549 1 1 1)
350 05 0: NULL
352 03 75: BIT STRING 0 unused bits, encapsulates {
355 30 72: SEQUENCE {
357 02 65: INTEGER
: 00 86 75 E6 DA C8 18 CB 77 44 C5 E9 48 F7 45 41
: 85 52 8E 70 E7 D1 D0 C5 7E 48 5D BC AB 9E C9 99
: CC 70 FC 18 F2 E4 12 78 38 7D CA 06 3C 18 64 E6
: FD 6B 3A CD 00 02 2B A0 67 CB F0 86 1C 13 0F 43
: D1
424 02 3: INTEGER 65537
429 A3 15: [3] {
431 30 13: SEQUENCE {
433 30 11: SEQUENCE {
435 06 3: OBJECT IDENTIFIER keyUsage (2 5 29 15)
440 04 4: OCTET STRING, encapsulates {
442 03 2: BIT STRING 0 unused bits
: '00000101'B
: Error: Spurious zero bits in bitstring.
446 30 13: SEQUENCE {
448 06 9: OBJECT IDENTIFIER
: sha1withRSAEncryption (1 2 840 113549 1 1 5)
459 05 0: NULL
461 03 65: BIT STRING 0 unused bits
: 51 13 3B 3C 7A EA 9A 97 30 FA F1 2E E5 A4 CD 77
: D6 02 6D BF 1B 4D E3 F3 5F 93 3F D7 96 0E 40 69
: 8A 29 B4 B1 B5 C0 79 B8 4C 6E 96 C6 15 26 61 F7
: 4E D5 27 9C 71 B6 5D 92 E6 3B 71 6E 76 02 E1 97
0 warnings, 1 error.
As you can see, there is an error: Error: Spurious zero bits in bitstring. For this particular instance, OWM cannot import this cert properly. Please ask your tp to provide a self signed cert that complies with the ASN1 standard.
Eng

Oracle Wallet Manager - Verisign root CA

Has anyone imported the trusted root CA certificate from Verisign into the Oracle Wallet Manager. I cannot seem to get that certificate in the format that I need. Any comments would be appreciated. I believe that OWM requires certificates in text format (IE Begin Certificate.....End Certificate) in order to import.
Thanks,
Matt

Hello Matt:
Im not quite sure where your problem with OID is. Storing X-509 certificates from CA's like Verisign into OID is usually quite easy. Are you trying to store your certificates in OID or some other repository? Can you tell me the step number in the admin guide where you are encountering trouble?
Thanks,
Jay
null

Oracle Wallet Manager an dPCK#12

HI,
Is the Oracle Wallet Manager able to import a user certificate with the format pck#12?
If so, from wich version of the Oracle Manager and how do I do this.
Thanks
Arny van der Deijl
Oracle Netherlands

Hi Arny:
Yes, we can use wallet manager to import PKCS#12 certificates.
This is certified with 9i release 1 and later.
There are several places where you can get details about importing user certificates with wallet manager.
First look at the Oracle Advanced Security Admin Guide chapters 15, 16, and 17 but chapter 16 has the most information
about wallet manager.
Heres a link to the guide:
http://otn.oracle.com/docs/products/oracle9i/doc_library/901_doc/network.901/a90150/toc.htm
Also, the OID admin guide has good information about wallet manager as it relates to OID. Appendix D of the OID admin
guide is a good place to start.
Here is a link to the OID Admin Guide:
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/manage.902/a95192/toc.htm
Hope this helps,
Jay

Oracle Wallet Manager: Organizational Unit containing "&"

Similar Messages

Maybe you are looking for